超导纳米线单光子探测器件的制备

超导纳米线单光子探测器件(SNSPD)是超导单光子探测系统的核心器件。文中介绍了成功制备的基于5nm厚的NbN超导超薄薄膜的SNSPD器件。器件核心结构为150nm宽的纳米曲折线结构,纳米线条占空比为75%,面积为20μm×20μm。超导纳米线是利用电子束曝光(EBL)技术和反应离子刻蚀(RIE)等工艺技术制备的。所制备的SNSPD样品,在温度3.5K下的临界电流约12.9μA;在1310nm波长光波辐照,12.5μA的偏置电流下,探测效率约0.016%。     

Photon-counting chirped amplitude modulation lidar system using superconducting nanowire single-photon detector at 1550-nm wavelength

We demonstrate a photon-counting chirped amplitude modulation(CAM) light detection and ranging(lidar) system incorporating a superconducting nanowire single-photon detector(SNSPD) and operated at a wavelength of 1550 nm.The distance accuracy of the lidar system was determined by the CAM bandwidth and signal-to-noise ratio(SNR) of an intermediate frequency(IF) signal. Owing to a short dead time(10 ns) and negligible dark count rate(70 Hz) of the SNSPD, the obtained IF signal attained an SNR of 42 d B and the direct distance accuracy was improved to 3 mm when the modulation bandwidth of the CAM signal was 240 MHz and the modulation period was 1 ms.     

Wavelength dependence of intrinsic detection efficiency of NbN superconducting nanowire single-photon detector

Superconducting nanowire single-photon detectors(SNSPDs) have attracted considerable attention owing to their excellent detection performance; however, the underlying physics of the detection process is still unclear.In this study, we investigate the wavelength dependence of the intrinsic detection efficiency(IDE) for NbN SNSPDs.We fabricate various NbN SNSPDs with linewidths ranging from 30 nm to 140 nm.Then, for each detector, the IDE curves as a function of bias current for different incident photon wavelengths of 510–1700 nm are obtained.From the IDE curves, the relations between photon energy and bias current at a certain IDE are extracted.The results exhibit clear nonlinear energy–current relations for the NbN detectors, indicating that a detection model only considering quasiparticle diffusion is unsuitable for the meander-type NbN-based SNSPDs.Our work provides additional experimental data on SNSPD detection mechanism and may serve as an interesting reference for further investigation.     

Balanced, gated-mode photon detector for quantum-bit discrimination at 1550 nm

A photon detector that combines two avalanche photodiodes (APDs) has been demonstrated for quantum-bit discrimination at 1550 nm. Spikes accompanied by signals in a gated mode were canceled by balanced output from the two APDs. The spike cancellation enabled one to reduce the threshold in the discriminators and thus the gate pulse voltage. The dark count probability and afterpulse probability were reduced to 7x10(-7) and 7x10(-4) , respectively, without affecting the detection efficiency (11%) at 178 K.     

基于超导纳米线单光子探测器深空激光通信模型及误码率研究

高速深空通信是深空探测的关键技术之一,具备单光子灵敏度的激光通信系统将大大提高现有的深空通信速度.然而,单光子条件下的激光通信不仅需要考虑传输环境的影响,还需要考虑实际单光子探测器性能和光子数量子态的分布.本文在不考虑大气湍流影响的情况下,以光电探测模型为基础,引入超导纳米线单光子探测器(SNSPD)系统的探测效率和暗计数,建立了反应系统差错性能的数学模型,提出了系统误码率的计算公式.先对公式中的光强和激光脉冲重复频率对误码率的影响进行仿真,再通过实验结果验证仿真模型.结果表明,光强对误码率的影响最明显,随着光强从0.01光子/脉冲到1000光子/脉冲的增加,误码率从10~(-1)到10~(-7)量级明显下降;激光脉冲重复频率对误码率的影响受到不同光强的制约,但都随着脉冲重复频率的增加呈下降趋势.与此同时,当增加光强或者提高速度时,误码率高于仿真结果,约在10~(-4)量级,其原因可能是实际通信中调制光信号的消光比不足和光纤引入背景噪声提高了系统暗计数.以上模型和实验结果为进一步开展基于SNSPD的月球-地球、火星-地球等高速深空激光通信奠定了基础.     

Performance of a superconducting single photon detector with nano-antenna

<正>The performance of single-photon detectors can be enhanced by using nano-antenna.The characteristics of the superconducting nano-wire single-photon detector with cavity plus anti-reflect coating and specially designed nanoantenna is analysed.The photon collection efficiency of the detector is enhanced without damaging the detector’s speed,thus getting rid of the dilemma of speed and efficiency.The characteristics of nano-antenna are discussed,such as the position and the effect of the active area,and the best result is given.The photon collection efficiency is increased by 92 times compared with that of existing detectors.     

Polarization-independent triangular-groove fused-silica gratings with high efficiency at a wavelength of 1550 nm

We describe polarization-independent triangular-groove fused-silica gratings illuminated by incident lights in the C + L bands as (de)multiplexers for dense wavelength division multiplexing (DWDM) application. The physical mechanisms of the grating can be shown clearly by using the simplified modal method with consideration of the corresponding accumulated average phase difference of two excited propagating grating modes, which illustrates that the grating structure depends mainly on the ratio of the average effective indices difference to the incident wavelength. Exact grating profile is optimized by using the rigorous coupled-wave analysis (RCWA). With the optimized grating parameters, the grating exhibits diffraction efficiencies of greater than 90% under TE- and TM-polarized incident lights for 101 nm spectral bandwidths (1500-1601 nm) and it can reach an efficiency of more than 99% for both polarizations at a wavelength of 1550 nm. Without loss of metal absorption, coating of dielectric film layers, the designed triangular-groove fused-silica grating should be of great interest for DWDM application.     

Photon-number-resolving detection at a telecommunications wavelength with a charge-integration photon detector

We demonstrate multiphoton discrimination at a telecommunications wavelength with the readout frequency of 40 Hz by a charge-integration photon detector (CIPD). The CIPD consists of an InGaAs pin photodiode and a GaAs junction field effect transistor as a preamplifier in a charge-integration circuit, which is cooled to 4.2 K to reduce thermal noise. The quantum efficiency of the CIPD (the detector itself) is 80% for 1530 nm light, and the readout noise is measured as 0.26 electrons at 40 Hz. We can construct Poisson distributions of photocarrier numbers with distinct peaks at each photocarrier number, corresponding to a signal-to-noise ratio of about 3.     

Crosstalk-free operation of multielement superconducting nanowire single-photon detector array integrated with single-flux-quantum circuit in a 0.1 W Gifford-McMahon cryocooler

We demonstrate the successful operation of a multielement superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems.     

Diode-pumped 1028 nm Ytterbium-doped fiber laser with near 90% slope efficiency

Highly efficient laser action from an Ytterbium-doped fiber (YDF) is demonstrated using a fiber Bragg grating (FBG) in conjunction with a 4% Fresnel reflection at room temperature. The YDF used is drawn from Yb₂O₃-doped preform, fabricated through deposition of porous layer of composition SiO₂-GeO₂ by the MCVD process in conjunction with a solution doping technique. The fabricated YDF has a core composition of 0.2 wt % of Yb₂O₃, 1.8 wt % of Al₂O₃ and 23 wt % of GeO₂ with a pump absorption of 9.0 dB/m. The fiber laser operates at wavelength of 1028 nm with a slope efficiency of 88% with respect to the launched 976 nm pump power using the YDF length of 7 m.     

400 mW and 16.5% wavelength conversion efficiency at 488 nm using a diode laser and a PPLN crystal in single pass configuration

Continuous wave power of more than 400 mW at 488 nm has been generated by frequency doubling of 2.45 W at 976 nm obtained from a distributed Bragg reflector tapered diode laser. This results in a wavelength conversion efficiency of 16.5% and an electrical-to-optical efficiency of more than 4.5%. We used a 50 mm long periodically poled MgO:LiNbO₃ bulk crystal in single-pass configuration for the second harmonic generation. This is to the author’s knowledge the highest output power and the highest wavelength conversion efficiency at 488 nm generated by a monolithic semiconductor laser device in single pass configuration with a bulk crystal. A deviation from the quadratic dependency of the frequency doubling is explained by the decrease of the beam quality of the fundamental wave.     

3D photon counting imaging at 1550 nm with 1.5-GHz sine-wave-gated InGaAs/InP GAPD

We demonstrated a 3D laser imaging system at 1550 nm with a 1.5-GHz sine-wave gated Geiger-mode InGaAs/InP avalanche photodiode (APD). An optical fiber bundle with 100 individual fiber outputs was implemented at the focal plane of the telescope, providing a 2.5-mrad imaging view. The system used single-pixel near-infrared single-photon detector to measure photons at fiber outputs instead of a photon counting array. The 1.5-GHz gated Geiger-mode InGaAs/InP APD with a timing jitter of 290 ps was operated in quasi-continuous mode with detection efficiency of ∼4.3%. We achieved higher than 6-cm surface-to-surface resolution at single-photon level, showing a potential of low-energy and eye-safe laser imaging system for long-distance measurements.     

Flat and compact switchable dual wavelength output at 1060 nm from ytterbium doped fiber laser with an AWG as a wavelength selector

A dual-wavelength ytterbium doped fiber laser with a narrowest spacing of 0.53 nm and widest spacing of 12.2 nm at 1064 nm is presented in this paper. An arrayed waveguide grating (AWG) together with an optical channel selector (OCS) have also been incorporated in the proposed setup that works as a switchable mechanism giving 23 different wavelength tunings. Producing an average output power of ?8 dB m and side mode suppression ratio (SMSR) of 59.65 dB, this dual-wavelength fiber laser is quite stable with an output power variance as low as 0.47 dB giving it an advantage due to its switching ability and stable dual-wavelength output powers.     

High efficiency and low threshold diode-end-pumped blue-ray laser at 457 nm wavelength with straight type cavity

Based on the analysis of laser threshold of quasi-three-level laser system and the parameters optimization of resonant cavity, a compact setup of 457 nm blue-ray laser system is designed, and the laser operation at 914 nm and its second harmonic at 457 nm was obtained by intracavity frequency doubling with LBO nonlinear crystal. At an incident pump power of 24.3 W, the maximum output power at 457 nm is 2.34 W the optical-to-optical conversion efficiency is greater than 9.74%, and the fluctuation of the blue output power is less than 3.01%, besides, laser threshold of this laser system is 3.7 W which is the lowest at present.     

Experimental demonstration of 60 Gb/s optical OFDM transmissions at 1550 nm over 100 m OM1 MMF IMDD system with central launching

Record-high 60 Gb/s optical orthogonal frequency division multiplexing(OFDM) transmissions over intensity modulation and direct-detection(IMDD)-based 100 m optical mode(OM1) multi-mode fiber(MMF) links are experimentally demonstrated, utilizing 10 GHz electro-absorption modulated laser intensity modulators at a single 1550 nm wavelength. Adaptive bit loading and a simple central launching scheme of the proposed scheme show an effective way for combating the channel fading and simplifying the system structure. It shows good potential in short reach data center interconnections.     

52% optical-to-optical conversion efficiency in a compact 1.5 W 532 nm second harmonic generation laser with intracavity periodically-poled MgO:LiNbO<Subscript>3</Subscript>

Intracavity second-harmonic generation of 1.56 and 1.52 W continuous-wave 532 nm green laser radiation was obtained by quasi-phase matching in periodically-poled MgO:LiNbO₃ (MgO:PPLN) crystals with lengths of 2 and 1 mm, respectively. The maximum optical-to-optical efficiency achieved was 52%. The intracavity temperature bandwidth was 15 and 12°C for 1 mm crystal and 2 mm crystal, respectively.