Determination of Total Chromium in Biological Samples by Automated Reagent Injection Chemiluminescence Analysis

A sensitive method for the determination of total chromium in real samples by flow injection–chemiluminescence (FI–CL) analysis was proposed. It was found that the CL intensity from luminol–lysozyme reaction could be markedly quenched, and the decrease of CL intensity was linear with the logarithm of Cr(III) concentrations over the range of 5.0 to 4000 pg mL^?1 with a detection limit of 2.0 pg mL^?1 (3σ) and relative standard deviations (RSDs) of 3.0, 2.6, and 2.0% for 10, 100, and 1000 pg mL^?1 Cr(III) (n = 7), respectively. At a flow rate of 2.0 mL min^?1, the whole process including sampling and washing could be accomplished within 36 s. The proposed CL method was successfully applied to the determination of total chromium in pharmaceutical capsules, a dietary supplement, and spiked human serum samples, with recoveries from 92.2 to 108.4% and RSDs of less than 4.0%. Using the homemade FI–CL model, the binding constant (K = 4.38 × 10⁶ L mol^?1) and the binding sites (n ≈ 1) of Cr(III) to lysozyme were given.     

Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin

The amoxicillin-imprinted polymer was synthesized with methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. The binding characteristic of the imprinted polymer to amoxicillin was evaluated by equilibrium binding experiments. Using the imprinted polymer as recognition material, 3-(3′-nitrophenyl)-5(2′-sulfonylphenylazo)-rhodanine (4NRASP) was synthesized by the authors and was used as chemiluminescence (CL) reagent. A novel chemiluminescence (CL) sensor for the determination of amoxicillin was developed based on the CL reaction of amoxicillin with potassium permanganate in an acidic medium. The sensor displayed excellent selectivity and high sensitivity. The linear response range of the sensor was from 5.0 × 10^?9 to 1.0 × 10^?6 g · mL^?1 (r = 0.9985) and the detection limit was 1.3 × 10^?9 g · mL^?1. The relative standard deviation for the determination of 1.0 × 10^?7 g · mL^?1 amoxicillin solution was 1.7% (n = 11). The sensor was applied to the determination of amoxicillin in urine samples with satisfactory results.     

Determination of Diammonium Glycyrrhizinate and Its Antioxidant Activity Using a Novel Chemiluminescence System

A novel chemiluminescence (CL) system was established for the determination of diammonium glycyrrhizinate (DG) in pharmaceutical preparations and its ability of scavenging hydroxyl radical. It was shown that a strong CL signal was observed when Eosin Y mixed with Fenton reagent. The CL intensity was decreased significantly when DG was added to the reaction system and partially scavenged the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometrical relationship with DG concentration. Based on this, we developed a new method for the determination of DG using a flow injection chemiluminescence (FI-CL) technique. Under the optimal conditions, the linear range of DG concentration was 6.0 × 10^?8–5.0 × 10^?6 mol/L (R = 0.9982) with a detection limit of 8.0 × 10^?9 mol/L (SN = 3), and the RSD was 3.8% for 2.0 × 10^?7 mol/L DG (n = 11). This method was successfully used in the determination of DG in tablets and the evaluation of hydroxyl radical scavenging capacity of DG. The possible reaction mechanism of the CL system is discussed.     

Determination of Vitamin A in Infant Milk-Based Formulas and Pharmaceutical Formulations Using Flow Injection with Ce(IV)–Na2SO3 Chemiluminescence Detection

A rapid and simple flow injection (FI) method is reported for the determination of vitamin A (retinol) based on its strong enhancing effect on the Ce(IV)–Na₂SO₃ chemiluminescence (CL) reaction in an acidic solution. The effect of key chemical and physical parameters (i.e., reagent concentrations, flow rate, and sample volume) was optimized and potential interferences examined. Under the selected experimental conditions, a linear calibration was obtained between the CL intensity and vitamin A concentration in the range 0.1–8.0 µg mL^?1 (r ²  = 0.9986, n = 8). The limit of detection (3 s x blank) was 0.01 µg mL^?1 retinol (n = 6) and the relative standard deviation (RSD) for 0.25 µg mL^?1 retinol was 2.3% (n = 10) with a sampling rate of 180 h^?1. The method was successfully applied to infant milk-based formulas and pharmaceutical formulations and the results were not significantly different at 95% confidence interval with those obtained by using a spectrophotometric reference method. The possible CL mechanism is also discussed briefly supporting with UV-visible, fluorescence, and CL spectra.     

Highly sensitive determination of doxorubicin and daunorubicin based on their effect on the resonance light scattering signals of the ethidium-DNA complex

We have developed a resonance light scattering (RLS) quenching assay for the highly sensitive determination of doxorubicin (DOX) and daunorubicin (DAU). It is based on the reduction of the intensity of the shoulder of the RLS spectra at 443?nm. The intensity of the RLS of the ethidium-DNA system decrease linearly on addition of trace quantities of DOX or DAU within the concentration range of 0.008 to 12.0???g?mL^?1 for DOX, and of 0.010 to 21.0???g?mL^?1 for DAU. The detection limits are 3.0 and 5.0?ng?mL^?1, respectively. The assay was successfully applied to the determination of DAU in synthetic and serum samples. Compared to the reported methods for anthracyclines, this assay displays higher sensitivity, lower detection limits, and a wider linear range.

Determination of Trace Copper by Fluorescence Spectrophotometry Based on Cu(DP)2+ and Cu‐4.0‐Generations Polyamidoamine Dendrimers Catalyze Cu2+ to Oxidize Fluorescein

Abstract

Fluorescein can emit strong and stable fluorescence. Cu²⁺ can oxidize fluorescein, which causes the fluorescence signal to diminish. Cu(DP)²⁺ (DP refers to α,α′‐dipyridyl) and Cu‐GPD‐4.0 (GPD‐4.0 refers to 4.0‐generations polyamidoamine dendrimers) both can catalyze Cu²⁺ to oxidize fluorescein, which causes the fluorescence signal to diminish sharply. The ΔF is directly proportional to the content of copper. Based on the facts above, a new catalytic fluorescence spectrophotometry for the determination of trace copper using Cu(DP)²⁺ and Cu‐GPD‐4.0 was established. The linear range of this method is 0.040–28 pg mL^?1. The regression equation for working curve is ΔF=209.5+14.39 C_Cu ²⁺ (pg mL^?1), n=7; correlation coefficient is 0.991. The detection limit of this method is 1.0×10^?14 g mL^?1. After replicate measurement times, RSDs are 3.1% and 4.2% for samples containing 0.040 and 28 pg mL^?1 Cu²⁺, respectively. This method is rapid and precise with high sensitivity and good repeatability. The method has been applied to the determination of trace copper in tea and human hair with satisfactory results. Meanwhile, the mechanism for the determination of trace copper by catalytic fluorescence spectrophotometry using Cu(DP)²⁺ and Cu‐GPD‐4.0 was also discussed.     

Determination of Rifampicin by Peroxomonosulfate‐Cobalt(II) Chemiluminescence System

Rifampicin can enhance the chemiluminescence (CL) of peroxomonosulfate‐cobalt(II) system, and the CL intensity is strongly dependent on the rifampicin concentrations. Based on this phenomenon, a rapid and sensitive flow injection CL method was developed for the determination of rifampicin. The relative CL intensity was linear with the rifampicin concentration over the range of 5×10^?8 to 1×10^?6 g·mL^?1 (r=0.9991), the detection limit was 7×10^?9 g·mL^?1 (S/N=3), and the relative standard deviation was 2.7% for 6×10^?7 g·mL^?1 rifampicin (n=11). Furthermore, this method was successfully applied to the determination of rifampicin in real eye drop and capsules sample.     

Flow Injection Chemiluminescence Sensor with Novel Rhodanine Ramification for Determination of Fenfluramine Based on Molecularly Imprinted Polymer

Abstract

Flow injection chemiluminescence (FI-CL) with molecularly imprinted polymer (MIP) was applied to determine fenfluramine. The fenfluramine-imprinted polymer was prepared with acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker. Methyl and sulfonic group were introduced to rhodanine matrix, and a novel rhodanine ramification 3MORASP was synthesized by the author, and it was used as chemiluminescence reagent. 3-(3′-Methoxyphenyl)-5(2′-sulfonylphenylazo)-rhodanine (3MORASP), first synthesized by the authors, was used as chemiluminescence (CL) reagent. The novel flow path of FI-CL was designed, which made three merged streams of reactants injected into MIP column move through different pathways simultaneously. Fenfluramine was detected based on the reaction of fenfluramine, 3MORASP, and potassium permanganate in an acidic medium. The CL intensity was correlated linearly with the concentration of fenfluramine over the range of 1.0 × 10^?7 to 5.0 × 10^?6 g · mL^?1, and the detection limit was 9.48 × 10^?9 g · mL^?1. The relative standard deviation (RSD) was 2.4% for determination of 1.0 × 10^?6 g · mL^?1 fenfluramine (n = 11). This method was successfully applied to the determination of fenfluramine in weight-reducing tonic.     

Determination of trace uranium (VI) using its self-assembly with a tetradentate–monodentate ditopic ligand by resonance light scattering

We describe here a resonance light scattering (RLS) method for uranium (VI) detection by using phosphorylethanol-amido-salophen (PAS) as optical probe. PAS is a tetradentate–monodentate ditopic ligand in which the tetradentate and monodentate ligands are salophen moiety and phosphate group, respectively. PAS can chelate uranyl with its salophen moiety. The chelated uranyl can connect phosphate group in another PAS through coordination reaction. This causes the self-assembly of PAS with uranyl to form a metallo-supramolecular polymer, resulting in a production of strong RLS signal. The RLS method was established based on the self-assemble. The RLS intensity is linearly related to the concentration of uranium (VI) in the 0.8–32 ng mL^?1 range, with a detection limit of 0.24 ng mL^?1 detection limit under optimal conditions. The method was successfully applied to determine uranium (VI) in environmental water samples with the recoveries between 97.1% and 102.6%.     

Determination of carbofuran by the quenching effect on resonance light scattering and its application to water and vegetable samples

A new method for the determination of carbofuran (CF) with DNA by a resonance light scattering (RLS) technique was developed. The intensity of RLS (I _RLS) of DNA–HCl system was significantly quenched in presence of CF. A RLS peak at 315.6 nm was found, and the quenched intensity of RLS was proportional to the concentration of CF. The linear range of the calibration curve was ≈0.02–2.0 µg mL^?1 and the detection limit (S/N = 3) 7 ng mL^?1. The CF in river water, cucumbers and rice samples was determined. The recovery rates were in the range of 90.0–111.1, 95.0–106, 93.0–111.0%, respectively. The mechanism of the reaction between CF and DNA is also discussed.     

Manganese-Doped Zinc Sulfide Quantum Dots for Determination of Bisphenol A by Room Temperature Phosphorescence

Manganese-doped ZnS quantum dots were synthesized through a facile process in aqueous solution using L-cysteine as a surface modifying agent. The quantum dots were characterized by transmission electron microscopy and X-ray diffraction spectroscopy, and had a favorable room-temperature phosphorescence property, with a longer emission time and a narrower emission profile than fluorescence. The phosphorescence was quenched by bisphenol A. Based on these findings, a room temperature phosphorescence quenching method was developed for the sensitive and selective detection of bisphenol A. Under the optimized conditions, the detection limit was 0.2 ng · mL^?1, and the relative standard deviation was 1.14% (C = 10 ng · mL^?1, n = 11). The proposed method was successfully applied to plastic products with satisfactory results. The recovery of the method was in the range of 96% to 106%.     

Selective extraction and determination of Au(III) by first-derivative spectrophotometry

The selective extraction of Au(III) in the presence of Zn(II) by salting-out of 2-propanol was investigated. The salting-out effect increased partitioning between water and 2-propanol in the presence of sodium chloride in aqueous–organic mixtures. This is observed through the distribution coefficient, which increases with salt addition. First-derivative spectrophotometry, which eliminates interference from overlapping spectral bands, was used for the determination of trace Au(III) in the presence of Zn(II). Absorption spectra were recorded and the first-derivative spectra were obtained using Δλ?=?10?nm. The calibration graph was linear for 0.857–5.142?µg?mL^?1 and the detection limit was 0.038–8?µg?mL^?1. The proposed method has been successfully applied to the determination of trace Au(III) in synthetic mixtures and Algerian low gold ore solutions. The results agree with those obtained by atomic absorption spectroscopy and the recoveries were >98%. The relative standard deviations were in all instances less than 3%.     

Simultaneous Determination of Gallium(III) and Indium(III) in Urine and Water Samples with Cloud Point Extraction and by Inductively Coupled Plasma Optical Emission Spectrometry

A simple, sensitive, and selective method for the determination of gallium and indium in different samples at trace levels is presented. This method was based on complexation of analyzes with 2-(5-bromo-2- pyridylazo)-5-diethylaminophenol (5-Br-PADAP) in the presence of t-octylphenoxy-polyethoxyethanol (Triton X-100). After phase separation, the analyzed concentrations were determined by inductively coupled plasma optical emission spectrometry. Quantitative extraction of gallium and indium was performed at pH 7.0, 1.7 mmol L^?1, 5-Br-PADAP, 1.3% (w/v) Triton X-100 and at 75°C. The relative standard deviations (RSD) of this method were between 0.3% and 1.6% (C = 20 ng mL^?1, n = 9). The calibration curve is linear over the concentration range 6–200 ng mL^?1 for gallium and 2–200 ng mL^?1 for indium, respectively. The limits of detection (LOD) for gallium and indium were 0.72 and 0.28 ng mL^?1, respectively. The results showed the developed method was not susceptible to matrix effects, providing recoveries between 98% and 102%. The accuracy of the developed method was evaluated by the analysis of spiked certified reference materials. The developed method was successfully applied to gallium and indium determination in urine and lake water with satisfactory results.     

Determination of Semicarbazide-Sensitive Amine Oxidase Activity in Blood Plasma by a Light Scattering Technique

A novel method for the determination of semicarbazide-sensitive amine oxidase (SSAO) activity in blood plasma has been developed. The method was based on the change of light scattering (LS) intensity resulting from the derivative product of the interaction of 2,4-dinitrophenylhydrazine (DNPH) with benzaldehyde produced by catalyzing of SSAO to benzylamine. In Britton-Robinson (B-R) buffer solution, the intensity of system's LS at 514.6 nm was significantly enhanced and was directly proportional to the concentration of benzaldehyde. In this method, SSAO enzyme activity is defined as the concentration of benzaldehyde (nmol) formed per mL plasma per hour. The range of determination of SSAO enzyme activity was 6.40 × 10^?3 ?0.340 nmol mL^?1 h^?1 with a detection limit of 1.92 × 10^?3 nmol mL^?1 h^?1. The relative standard deviation was 2.8–4.1% and the average recovery was 67.9% (n = 6).     

Fluorescence Quenching Method for Determination of Trace Tungsten in Soil after Cloud Point Extraction

A new procedure for trace tungsten W(VI) in soil by fluorescence quenching method coupled with cloud point extraction (CPE) as the separation-preconcentration method was described. The Triton X-100 CPE behavior of W(VI)-salicylfluorone (SAF)was investigated. Under the optimized conditions, the fluorescence quenched intensity (ΔF) was linearly with W(VI). The range of linear was 0.8 ～ 20.0 μg · L^?1, the detection limit (DL) was 0.14 ng · mL^?1 (3σ), the relative standard deviation 3.3% (c = 10.0 μg · L^?1, n = 5) and the recovery was 101.0–102.2%. The proposed method applied to the analysis of W(VI) in certified reference materials and real samples.     

A novel chemiluminescence reaction system for the determination of lincomycin with diperiodatonickelate(IV)

A sensitive and high selective chemiluminescence (CL) method was developed for the determination of lincomycin in acid medium using diperiodatonickelate as a reagent. The mechanism leading to luminescence is discussed by comparing the spectra of fluorescence and CL. Relative CL intensity is linear in the range from 8.0 ng mL^?1 to 1.0 µg mL^?1, the limit of detection is 2.5 ng mL^?1 (3σ), and the relative standard deviation is 4.0% at 0.1 µg mL^?1 of lincomycin (n?=?7). The method was successfully applied to the determination of lincomycin in injections, human urine, and in serum samples.     

Flow Injection Chemiluminescence Determination of Puerarin in Pharmaceutical Preparations Using Eosin Y‐Fenton System

A novel chemiluminescence (CL) system was established for the determination of puerarin in pharmaceutical preparations. It was shown that a strong CL signal was observed when Eosin Y reacted with the hydroxyl radicals which were generated from Fenton reagent in acidic medium. The CL intensity was decreased significantly when puerarin was added to the reaction system and partially scavenged the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometrical relationship with puerarin concentration. Based on this, a new method for the determination of puerarin using a flow injection chemiluminescence technique was developed. The experimental parameters that affected the CL intensity were optimized. Under the optimal conditions, the linear range for puerarin concentration was 8.0×10^?8?2.0×10^?6 mol/L (R=0.9982) with a detection limit of 7.5×10^?9 mol/L (S/N=3) and the relative standard deviation was 1.7% for 4.0×10^?7 mol/L puerarin (n=11). The proposed method was applied to the determination of puerarin in a puerarin injection with satisfactory results.     

Preparation of an ionic liquid-mediated carbon nanotube-poly(dimethylsiloxane) fiber by sol–gel technique for determination of polycyclic aromatic hydrocarbons in urine samples using head-space solid-phase microextraction coupled with gas chromatography

A novel ‘ionic liquid-mediated multi-walled carbon nanotube (MWCNT)-poly(dimethylsiloxane) (PDMS)’ hybrid coating was prepared by the covalent functionalization of MWCNTs with hydroxyl-terminated PDMS using the sol–gel technique. The prepared fiber was successfully used for the separation and determination of trace amounts of polycyclic aromatic hydrocarbon compounds (PAHs) in four urine samples using head-space solid-phase microextraction coupled to gas chromatography-flame ionization detection. The proposed fiber has high thermal stability and long durability and it can be used more than 210 times without any significant change in its sorption properties. The effects of important parameters such as the exposure time, sampling temperature, sample ionic strength and stirring rate on the extraction efficiency have been studied and optimized. Under the optimal conditions, the method detection limits (S/N = 3) were in the range of 0.0005–0.004 ng mL^?1 and the limits of quantification (S/N = 10) between 0.002 and 0.01 ng mL^?1. The relative standard deviations for one fiber (repeatability, n = 5) were 4.9–7.5 % and for the fibers obtained from different batches (reproducibility, n = 3), 6.1–8.9 %. The developed method was successfully applied to determine trace levels of PAHs in real urine samples. The obtained relative recoveries for the spiked samples with 0.05 ng mL^?1 of each of the PAH compounds were 89.3–107.2 %.     

№Determination of Trace Arsenic by Solid Substrate-Room Temperature Phosphorescence Quenching Method Based on the Catalyzed Reaction of H2O2 Oxidizing 9-Hyd roxy-2,3,4,9-tet rahyd ro-1,10-anth raquinone

A new solid substrate-room temperature phosphorescence （SS-RTP） quenching method for the determination of trace As（V） has been developed, based on the facts that 9-hydroxy-2,3,4,9-tetrahydro-1,10-anthraquinone （R） can emit intense and stable SS-RTP on solid substrate, and α,α＇-dipyridyl can activate As（V） catalysis of the reaction of H2O2 oxidizing R to non-phosphorescence compound R＇, which can cause the sharp quenching of SS-RTP. Under the optimum condition, the relationship between the ΔIp of the emitting intensity and 1.60-160 fg·spot^-1 As（V） （corresponding concentration： 0.0040-0.40 ng·mL^-1, sample volume： 0.4 μL·spot^-1） conformed to Beer＇ law. The regression equation of working curve can be expressed as ΔIp= 20.46＋0.5492CAs（v） fig·spot^-1） （r= 0.9995, n = 6）. The limit detection （LD） is 0.27 fg·spot^-1 [As（V） corresponding concentration： 6.8 × 10^-13 g·mL^-1, n=11]. The samples containing 0.0040 and 0.40 ng·mL^-1 As（V） were repeatedly determined for 11 times. RSD are 3.0% and 2.7% respectively. The SS-RTP mechanism was also discussed. R was synthesized in this paper. Meanwhile, the structure was determined by NMR, IR, mass spectra and elemental analysis.     

Highly Sensitive Spectrofluorimetric Determination of Trace Amounts of Superoxide Dismutase Using a Prulifloxacin-Terbium(III) Probe

Abstract

A new spectrofluorimetric method was developed for determining superoxide dismutase. The interactions between prulifloxacin (PUFX) –Tb³⁺ complex and superoxide dismutase had been studied by using UV-Vis absorption and fluorescence spectra. Using prulifloxacin–Tb³⁺ as a fluorescence probe, under optimum conditions, superoxide dismutase could remarkably enhance the fluorescence intensity of the prulifloxacin–Tb³⁺ complex at λ = 545 nm, and the enhanced fluorescence intensity was in proportion to the concentration of superoxide dismutase. Optimum conditions for the determination of superoxide dismutase were also investigated. The dynamic range for the determination of superoxide dismutase was 0.032 to 22.56 µg mL^?1, and the detection limit (S/N = 3) was 1.5 ng 4 mL^?1. This method was simple, practical, and relatively free of interference from coexisting substances and could be successfully used to determine superoxide dismutase in the plant and blood samples. The mechanism of fluorescence enhancement of prulifloxacin–Tb³⁺ complex by superoxide dismutase was also discussed.