Flower-like Au/Ag/TiO_2 nanocomposites with enhanced photocatalytic efficiency under visible light irradiation

Uniform flower-like TiO_2 coated Au nanostars and core-shell Au@Ag natiostars with different amounts of Ag coating were prepared through a facile method by hydrolysis of TiF_4 under an acidic environment.The photocatalytic capability of these flower-like nanocomposites under visible light irradiation was found to be enhanced by up to 4.7-fold compared to commercial P25 TiO_2 nanoparticles.The enhanced photocatalytic activity was ascribed to improved light absorption and hot electron injection from the photo-excited Au@Ag core to the TiO_2 shell.     

Kinetic studies of direct blue photodegradation over flower-like TiO<Subscript>2</Subscript>

The kinetics of photocatalytic oxidation reaction for direct blue solution was studied by using flower-like TiO₂ under the irradiation of ultraviolet (UV) light. A series of possible affecting factors were studied, including pH value, the additive amount of light catalyst, H₂O₂ and with or without Ag modification. The kinetics of photocatalytic degradation under UV was found following a pseudo-second-order reaction kinetic model with high regression coefficients (R ²). It has been demonstrated that the initial concentration and its related factors have influenced the photocatalytic degradation efficiency and corresponding kinetic parameters. Also, the kinetic parameter k is increasing with the degradation efficiency.     

Three-dimensional hierarchical CeO<Subscript>2</Subscript> nanowalls/TiO<Subscript>2</Subscript> nanofibers heterostructure and its high photocatalytic performance

Combining the versatility of electrospinning technique and hydrothermal growth of nanostructures enabled the fabrication of hierarchical CeO₂/TiO₂ nanofibrous mat. The as-prepared hierarchical heterostructure consisted of CeO₂ nanowalls growing on the primary TiO₂ nanofibers. Interestingly, not only were secondary CeO₂ nanowalls successfully grown on TiO₂ nanofibers substrates, but also the CeO₂ nanowalls were uniformly distributed without aggregation on TiO₂ nanofibers. The photocatalytic studies suggested that the CeO₂/TiO₂ heterostructures showed enhanced photocatalytic efficiency compared with bare TiO₂ nanofibers under UV light irradiation.     

Enhancement of visible-light photocatalytic activity of Cu-doped TiO<Subscript>2</Subscript> nanoparticles

Bare TiO₂ and Cu-doped TiO₂ nanoparticles with different nominal doping amounts of Cu ranging from of 0.5 to 5.0 mol% were synthesized using the modified sol–gel method. The samples were physically characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller-specific surface area, UV–Vis diffuse reflectance spectroscopy, zeta potential, X-ray photoelectron spectroscopy, inductively coupled plasma, and photoluminescence techniques. The Cu-doped TiO₂ exhibited good photocatalytic activity in mineralization of oxalic acid and formic acid under visible light irradiation. Photomineralization of oxalic and formic acids under visible light irradiation revealed greatly enhanced photoactivity exhibited by the 2.0 mol% Cu-doped TiO₂ photocatalyst compared to bare TiO₂ . The enhanced photocatalytic performance arises from copper ion doping in the TiO₂ structure, leading to an extended photoresponsive range, enhanced photogenerated charge separation, and transportation efficiency.     

One-dimensional porous Ag/AgBr/TiO<Subscript>2</Subscript> nanofibres with enhanced visible light photocatalytic activity

One-dimensional (1D) Ag/AgBr/TiO₂ nanofibres (NFs) have been successfully fabricated by the one-pot electrospinning method. In comparison with bare TiO₂ NFs and Ag/AgBr/PVP (polyvinylpyrrolidone) NFs, the 1D Ag/AgBr/TiO₂ NFs photocatalyst exhibits much higher photocatalytic activity in the degradation of a commonly used dye, methylene blue (MB), under visible light. The photocatalytic removal efficiency of MB over Ag/AgBr/TiO₂ NFs achieves almost 100 % in 20 min. The photocatalytic reaction follows the first-order kinetics and the rate constant (k) for the degradation of MB by Ag/AgBr/TiO₂ NFs is 5.2 times and 6.6 times that of Ag/AgBr/PVP NFs and TiO₂ NFs, respectively. The enhanced photocatalytic activity is ascribed to the stronger visible light absorption, more effective separation of photogenerated electron-hole pairs, and faster charge transfer in the long nanofibrous structure. The Ag/AgBr/TiO₂ NFs maintain a highly stable photocatalytic activity due to its good structural stability and the self-stability system of Ag/AgBr. The mechanisms for photocatalysis associated with Ag/AgBr/TiO₂ NFs are proposed. The degradation of MB in the presence of scavengers reveals that h⁺ and ^?O ₂ ^? significantly contribute to the degradation of MB.     

Preparation of ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by mechanical alloying and annealing for sensitizing C-modified TiO<Subscript>2</Subscript> and acquirement of efficient photocatalyst

ZnFe₂O₄ nanoparticles sensitized by C-modified TiO₂ hybrids (ZnFe₂O₄–TiO₂/C) were successfully prepared by a feasible method. The ZnFe₂O₄ nanoparticles were prepared by mechanical alloying and annealing. The residual organic compounds in the synthetic process of TiO₂ were selected as the carbon source. The as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, X-ray fluorescence, transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet–visible light diffuse reflectance spectroscopy (UV–Vis) and N₂ adsorption–desorption analysis. The photocatalytic activity of the photocatalysts was measured by degradation of methyl orange under ultraviolet (UV) light and simulated solar irradiation, respectively. The results show that the carbon did not enter the TiO₂ lattice but adhered to the surface of TiO₂. The photocatalytic activity of the as-prepared C-modified TiO₂ (TiO₂/C) improved both under UV and simulated solar light irradiation, but the improvement was not dramatic. Introduction of ZnFe₂O₄ into the TiO₂/C could enhance the absorption spectrum range. The ZnFe₂O₄–TiO₂/C hybrids exhibited a higher photocatalytic activity both than that of the pure TiO₂ and TiO₂/C under either UV or simulated solar light irradiation. The complex synergistic effect plays an important role in improving the photocatalytic performance of ZnFe₂O₄–TiO₂/C composites. The optimum photocatalytic performance was obtained from the ZnFe₂O₄(0.8 wt%)–TiO₂/C sample.     

花状TiO2分级结构的可控合成与其光催化性能

采用水热法可控合成了花状TiO₂分级结构材料,运用扫描电镜、透射电镜、X射线衍射、N₂物理吸附-脱附等手段,对其进行了表征,系统研究了NaOH用量、H₂O₂浓度、HNO₃浓度、反应温度及时间等因素对所得样品形貌的影响,并评价了它们的光催化性能.结果表明,花状TiO₂分级结构为锐钛矿相,颗粒大小均一;随制备条件的变化,构成花状TiO₂分级结构的基元结构分别为纳米线、纳米片,纳米线直径约25nm,纳米片厚度不足10nm;该样品具有较高的比表面积,表现出良好的单次光催化活性与重复使用性能.     

TiO<Subscript>2</Subscript>/WO<Subscript>3</Subscript> photoanodes with enhanced photocatalytic activity for air treatment in a polymer electrolyte cell

The application of electrochemically enhanced photocatalysis in air treatment using a Nafion-based photoelectrochemical cell and TiO₂/WO₃ photoanodes for organic vapor photooxidation under both UV and visible light irradiation is briefly presented. In that direction, the obtained results regarding the preparation and characterization of the TiO₂/WO₃ photoanodes with enhanced photocatalytic activity are reviewed. Particular emphasis is given in the comparison of the photocatalytic behavior of bilayer TiO₂/WO₃ coatings, electrosynthesized on stainless steel mesh and powder C + mixed (WO₃ + TiO₂) photoanodes. The advantages of using a high surface area C + mixed (WO₃ + TiO₂) powder catalysts as photoanodes against their plain TiO₂ + C and WO₃ + C analogues are discussed.     

Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

Modification of the Optical and Electronic Properties of TiO<Subscript>2</Subscript> By N Anion-Doping for Augmentation of the Visible Light Assisted Photocatalytic Performance

In this work, a nitrogen-doped anatase TiO₂ nanocrystal is prepared by a modified sol-gel preparation method using the nonionic surfactant (polyoxyethylene sorbitan monooleate) as a structural controller and a soft template. The as-prepared samples are characterized by X-ray diffraction, Raman spectroscopy, UVVis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy techniques. Then the photocatalytic activity of these samples is assessed by the photocatalytic oxidation of phenol under visible light irradiation. The phenol concentration is measured using a UV-Vis spectrometer. Experimental results show that N-doping leads to an excellent visible light photocatalytic activity of the TiO₂ nanocatalyst. Furthermore, the formation energy and electronic structure of pure and N-doped anatase TiO₂ are described by density functional theory (DFT) calculations. It is found that N-doping narrowed the band gap of bare TiO₂, which leads to an excellent visible light photocatalytic activity of N–TiO₂ nanocatalysts. Therefore, the prepared N–TiO₂ photocatalyst is expected to find the use in organic pollutant degradation under solar light illumination.     

花状CeO2/TiO2异质结的构筑及光催化性能

采用溶剂热法制备了三维花状CeO₂/TiO₂异质结光催化剂,然后以甲基橙(MO)为模拟有机污染物,在氙灯照射下考察了其光催化活性。结果表明,花状结构由纳米片和纳米颗粒复合而成,纳米片上均匀地附着CeO₂颗粒。Ce/Ti的物质的量之比(n_Ce/n_Ti)和溶剂热时间影响异质结的光催化性能,当n_Ce/n_Ti=0.1、溶剂热时间为6 h时,CeO₂/TiO₂的光催化活性达到最佳,氙灯照射50 min的降解率达95%,光催化活性优于纯TiO₂,这主要是CeO₂和TiO₂形成了异质结,有利于光生电子和空穴的分离。     

Cooperation among N,F and Fe in tri-doped TiO<Subscript>2</Subscript> photocatalyst

TiO₂ photocatalysts tri-doped with N, F and Fe were synthesized by a sol–gel method. The cooperation of N, F and Fe in tri-doped TiO₂ was verified by monitoring NH₃ decomposition, X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and ultraviolet–visible (UV–Vis) absorption spectroscopy, and by the simulation based on the density functional theory (DFT). The results from NH₃ decomposition revealed that the cooperation of N, F and Fe broadened the optical response of TiO₂ to the visible light range and also enhanced the photocatalytic activity of TiO₂ under UV light. The reusability of the tri-doped TiO₂ sample after three cycles under UV and visible light irradiation was very good. XRD patterns and SEM and HRTEM images indicated that the tri-doped sample was nanometric anatase with a small amount of rutile with an average particle size of 18 nm. Tri-doping with N, F and Fe suppressed the phase transition from anatase to rutile and also resulted in some more lattice defects. XPS analysis showed that the N, F and Fe atoms were doped into the TiO₂ lattice. UV–Vis absorption spectra of the tri-doped TiO₂ showed that its optical absorption edge was moved up to 640 nm and its UV absorption was also enhanced. The DFT results confirmed that the cooperation of Fe 3d and N 2p orbits narrowed the band gap of TiO₂ and the F 2p orbit broadened the upper valence bands. The synergistic electron density around N, F and Fe in tri-doped TiO₂ was capable of enhancing the photochemical stability and reusability of TiO₂.     

Ion engineering techniques for the preparation of the highly effective TiO<Subscript>2</Subscript> photocatalysts operating under visible light irradiation

The successful application of ion engineering techniques for the development of TiO₂ photocatalysts operating under visible and/or solar light irradiations has been summarized in this review article. First, we have physically doped various transition metal ions within a TiO₂ lattice on an atomic level by using an advanced metal ion implantation method. The metal ion implanted TiO₂ could efficiently work as a photocatalyst under visible light irradiation. Some field tests under solar light irradiation clearly revealed that the Cr or V ions implanted TiO₂ samples showed 2–3 times higher photocatalytic reactivity than the un-implanted TiO₂. Second, we have developed the visible light responsive TiO₂ thin film photocatalyst by a single process using an RF-magnetron sputtering (RF-MS) deposition method. The vis-type TiO₂ thin films showed high photocatalytic reactivity for various reactions such as reduction of NOx, degradation of organic compounds, and splitting of H₂O under visible and/or solar light irradiations.     

Sol-gel preparation and characterization of Co/TiO<Subscript>2</Subscript> nanoparticles: Application to the degradation of methyl orange

Cobalt doped titania nanoparticles were synthesized by sol-gel method using titanium(IV) isopropoxide and cobalt nitrate as precursors. X-Ray diffraction (XRD) results showed that titania and Co/TiO₂ nanoparticles only include anatase phase. The framework substitution of Co in TiO₂ nanoparticles was established by XRD, scanning electron microscopy equipped with energy dispersive X-ray microanalysis (SEM-EDX) and Fourier transform infrared (FT-IR) techniques. Transmission electron microscopy (TEM) images confirmed the nanocrystalline nature of Co/TiO₂. The increase of cobalt doping enhanced “red-shift” in the UV-Vis absorption spectra. The dopant suppresses the growth of TiO₂ grains, agglomerates them and shifts the band absorption of TiO₂ from ultraviolet (UV) to visible region. The photocatalytic activity of samples was tested for degradation of methyl orange (MO) solutions. Although the photocatalytic activity of undoped TiO₂ was found to be higher than that of Co/TiO₂ under UV irradiation, the presence of 0.5% Co dopant in TiO₂ resulted in a catalyst with the highest activity under visible irradiation.     

Qualitative investigations of the photocatalytic dye destruction by TiO<Subscript>2</Subscript>-coated polyester fabrics

The preparation of TiO₂-coated polyester fabrics for purposes of photocatalytic water purification requires coating agents with crystalline TiO₂ particles preferably in the anatase modification. The resulting coatings should exhibit a high water resistance and high photocatalytic activity according to reaction with structurally different dyestuffs. For this, the synthesis of anatase sols by hydrolysis of tetraisopropyltitanate in acidic medium under reflux was optimized. By precoating or addition of polymeric epoxysilanes a good adhesion on the polyester support could be realized. The photocatalytic activity was tested with different dyestuffs as: Methylene blue, Rhodamine B and the azo dyes AcidOrange 7 and C.I. Reactive red 158. The rate of photodestruction depends strongly on the type of used dye and its structure. Surprisingly, no differences in photodegradation were found in case of investigations with Rhodamine B, if the photoreaction is performed under exposure with UV or with visible light. A possible explanation of the similar behavior of photoreaction under different light sources could be a photodestruction by electron transfer from Rhodamine B to TiO₂. Therefore, Rhodamine B seems to be generally not suitable for the evaluation of the photoactivity of TiO₂ under irradiation with visible light.     

Visible-light-driven photocatalytic degradation of microcystin-LR by Bi-doped TiO<Subscript>2</Subscript>

Bi-doped nano-crystalline TiO₂ (Bi–TiO₂) has been synthesized by sonocrystallization at low temperature. The Bi–TiO₂ materials have narrower bandgaps than pristine TiO₂, which endow them with significant visible light absorption. Accordingly, these materials had enhanced photocatalytic activity in the degradation of organic dye pollutants and the cyanotoxin microcystin-LR (MC-LR) under visible irradiation. It was found that degradation of MC-LR is rather efficient. After irradiation with visible light for 12 h the original MC-LR was removed completely, and 78% of the organic carbon was mineralized into CO₂ after irradiation for 20 h. The hydroxyl radical (·OH) is the major active species responsible for the degradation reaction. Identified intermediates primarily originate from attack of ·OH radicals on the double bonds between C4 and C5 (C6 and C7) of Adda and the ethylenic bond of Mdha in MC-LR. Some peptide bonds are also broken with longer irradiation time.     

Synthesis,characterization of B-doped TiO<Subscript>2</Subscript> nanotubes with high photocatalytic activity

B-doped TiO₂ nanotubes (B/TiO₂ NTs) were prepared by the combination of sol–gel process with hydrothermal treatment. The prepared catalysts were characterized by XRD, TEM and XPS. The photocatalytic activity of B/TiO₂ NTs was evaluated through the photodegradation of aqueous methyl orange. The results demonstrated that the 1.5% B/TiO₂ NTs calcined at 300 °C possessed the best photocatalytic activity. Compared with pure TiO₂ nanotubes, the doping with B significantly enhanced the photocatalytic efficiency.     

Single-step solvothermal synthesis of mesoporous anatase TiO<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for the abatement of organic pollutants

In the present work, we have fabricated a novel mesoporous TiO₂–rGO nanocomposite by a facile one-step solvothermal method using titanic sulfate as the TiO₂ source. The as-prepared composites were characterized by transmission electron microscopy, X-ray diffraction; UV–Vis diffuse reflectance spectra, X-ray photoelectron spectroscopy and photoluminence spectra. In situ nucleation and anchoring of TiO₂ nanoparticles onto a graphene sheet is favorable fpr forming an intimate interfacial contact, and the chemically bonded TiO₂–rGO nanocomposites commendably enhanced their photocatalytic activity in the photodegradation of rhodamine B and phenol. The high photocatalytic activity of the as-synthesized nanocomposites are primarily ascribed to the mesoporous structure, efficient charge transportation and separation with enhanced visible light absorption, which come from the appealing nanoarchitecture, for instance, ultra-dispersed and ultra-small TiO₂ nanocrystals along with intimate and absolute interfacial contact between the TiO₂ nanocrystals and the graphene sheet.     

Structural characterization and photocatalytic properties of novel Bi<Subscript>2</Subscript>FeVO<Subscript>7</Subscript>

Bi₂FeVO₇ was prepared by a solid-state reaction technique for the first time and the structural and photocatalytic properties of Bi₂FeVO₇ were studied. The results shows that this compound crystallized in the tetragonal crystal system with space group I4/mmm. Moreover, the band gap of Bi₂FeVO₇ was estimated to be about 2.22(6) eV. For the photocatalytic water splitting reaction, H₂ or O₂ evolution was observed from pure water with Bi₂FeVO₇ as the photocatalyst by ultraviolet light irradiation. Degradation of aqueous methylene blue (MB) dye by photocatalytic way over this compound was further studied under visible light irradiation. Bi₂FeVO₇ shows higher catalytic activity compared to TiO₂ (P-25) for MB photocatalytic degradation under visible light irradiation. Complete removal of aqueous MB was realized after visible light irradiation for 170 min with Bi₂FeVO₇ as the photocatalyst. The reduction of the total organic carbon (TOC) and the formation of inorganic products, SO ₄ ²⁻ and NO ₃ ⁻ revealed the continuous mineralization of aqueous MB during the photocatalytic course.     

Template‐free Fabrication of ZnS/TiO2 Photocatalyst with Macrochannels

Constructing a porous structure in photocatalysts is an effective strategy for improving the photocatalytic activity because of its enhanced molecule transfer capability and light capturing efficiency. In this work, a hierarchical macro‐/mesoporous ZnS/TiO₂ composite with macrochannels was successfully synthesized without using templates by the simple dropwise addition of an ethanol solution of tetrabutyl titanate and zinc acetate into a sodium sulfide aqueous solution, which was then calcined at 450°C. Compared with pure TiO₂, the ordered porous ZnS/TiO₂ composite exhibited an enhanced photocatalytic activity on methylene blue removal under UV‐light irradiation. The results indicate that the macro‐/mesoporous structure, the large specific surface area, and the heterostructure combination between ZnS and TiO₂ play a synergistic effect on the enhanced photocatalytic activity via improving the light absorption and the diffusion of organic molecules, providing more reactive sites for the photocatalytic reaction and improving the separation of photogenerated electron–hole pairs, respectively. Radical trapping experiments demonstrated that holes (h⁺) and superoxide anion radicals (O₂⁻) play an important role in the photocatalytic oxidation process.