新型茂钛催化剂合成聚乙烯-b-间规聚苯乙烯嵌段共聚物的研究Ⅰ.嵌段共聚合反应

以五甲基茂基三苄氧基钛 [Cp Ti(OBz) 3]为主催化剂、改性甲基铝氧烷 (mMAO)为助催化剂 ,进行乙烯与苯乙烯的嵌段共聚合反应 .讨论了乙烯预聚温度、预聚时间、主催化剂的浓度、Al(mMAO) Ti摩尔比、苯乙烯的浓度以及外加三异丁基铝 (TIBA)等条件对共聚反应的影响 .发现适宜的共聚反应条件为 ,预聚温度为40℃ ;主催化剂的浓度为 6 6 7× 10 - 4 mol L ;铝钛摩尔比为 2 0 0 .共聚反应的催化效率随预聚时间的延长而降低 ;嵌段共聚物中苯乙烯链节含量随苯乙烯的浓度的增加而增加 ;外加TIBA对嵌段共聚物的形成及催化效率的提高起关键性作用     

茂钛催化剂苯乙烯/1-丁烯嵌段共聚物的合成与表征

用 η5 五甲基环戊二烯基三苄氧基钛 /改性甲基铝氧烷 (Cp Ti(OBz) 3/mMAO)催化剂对苯乙烯 / 1 丁烯嵌段共聚合进行了研究 .考察了外加三异丁基铝 (TIBA) ,1 丁烯预聚合时间及苯乙烯浓度对聚合结果的影响 .发现外加TIBA的量对催化活性的影响存在峰值 ,[TIBA]=2 6mmol/L时催化活性最大 ,达到 12 2kgP/gTih ;催化活性随 1 丁烯预聚时间延长而降低 ;苯乙烯的浓度较低时 ,催化活性随其浓度增大而增大 ,但当苯乙烯的浓度大于 4 18mol/L时 ,催化活性变化不明显 .对嵌段共聚物用丁酮 ,四氢呋喃和氯仿连续萃取分离 ,四氢呋喃和氯仿中的可溶级份是嵌段共聚物sPS b PB ,占共聚合产物的 2 1 0～ 41 3wt % .对嵌段共聚物用13C NMR ,DSC ,WAXD和FTIR等手段进行了表征     

嵌段共聚物sPS-b-Poly(S-co-E)的合成与表征

用主催化剂茂基三苄氧基钛和茂基三呋喃甲氧基钛与助催化剂甲基铝氧烷(MAO)组成的催化体系研究了先预聚苯乙烯(S)再引入乙烯(E)进行的嵌段共聚合反应,发现总的催化效率随苯乙烯预聚合时间的延长而增加.对嵌段共聚合产物用丁酮、四氢呋喃和氯仿进行顺序萃取分离,得到四氢呋喃中的可溶级分即嵌段共聚物sPS-b-Poly(S-co-E),占总嵌段共聚合产物的30%～50%,其中乙烯链节的含量占总嵌段共聚物的9%～14%.对嵌段共聚物用DSC、WAXD、FTIR、13CNMR和偏光显微等方法进行了表征.     

等规聚苯乙烯与聚(乙烯/丙烯)嵌段共聚物的研究(Ⅰ)──一步法嵌段共聚合反应

用自制的稀土化合物改性的高效钛系载体催化剂(SN－1),以顺序加料一步法进行苯乙烯与乙烯/丙烯混合单体的嵌段共聚合反应．通过实验找出典型的共聚合条件为：甲苯为溶剂;催化剂浓度为1．5～1．6mmol/L;铝钛摩尔比为20;聚合温度65℃．先使苯乙烯预聚一定时间,然后连续通入乙丙混合气体．共聚合产物中iPS链段的含量随苯乙烯单体预聚合时间的延长而增加．     

等规聚苯乙烯与聚（乙烯／丙烯）嵌段共聚物的研究（I）——一…

用自制的稀土化合物改性的高效钛系载体催化剂（ＳＮ－１），以顺序加料一步法进行苯乙烯与乙烯／丙烯混合单体的嵌段共聚合反应。通过实验找出典型的共聚合条件为：甲苯为溶剂；催化剂浓度为１．５￣１．６ｍｍｏｌ／Ｌ，铝钛摩尔比为２０；聚合温度６５℃，先使苯乙烯预聚一定时间，然后连续通入乙丙混合气体，共聚合产物中ｉＰＳ链段的含量随苯乙烯单体预聚合时间的延长而增加。     

新型茂钛催化剂合成聚乙烯-b-间规聚苯乙烯嵌段共聚物的研究Ⅱ.嵌段共聚物的分离及结构性能

将五甲基茂基三苄氧基钛 (Cp Ti(OBz) 3) 改性甲基铝氧烷 (mMAO)催化体系以顺序加料溶液法合成的乙烯与苯乙烯嵌段共聚反应产物进行沸丁酮、沸四氢呋喃 (THF)和沸氯仿等溶剂连续抽提分离 ,发现嵌段共聚物主要存在于THF和CHCl3的可溶级分中 ,嵌段共聚物的总含量占共聚产物的 2 2 8wt%～ 38 2wt% ,对THF和CHCl3可溶级分分别用 1 3C NMR、WAXD、DSC和GPC等手段进行表征 .1 3C NMR谱显示出含有支化聚乙烯链段和间规聚苯乙烯链段的嵌段共聚物特殊结构 ,WAXD谱表明嵌段共聚物因两链段的相互缠结使各自结晶度显著较低 ,由于嵌段共聚物苯乙烯链段较长、乙烯链段较短 ,DSC图谱只显示苯乙烯链段的结晶熔融峰 ,GPC曲线表明 ,单茂钛催化体系催化乙烯 苯乙烯嵌段共聚合的单一活性中心特征 .由此对Cp Ti(OBz) 3 mMAO催化体系的苯乙烯 乙烯嵌段共聚合机理进行初探     

茂钛催化剂间规聚苯乙烯-b-聚丙烯嵌段共聚物的合成及产物分离与表征

以茂基三正丙氧基钛［ＣｐＴｉ（Ｏ ｎ Ｐｒ）３］和改性的甲基铝氧烷（ＭＡＯ）为催化体系，用于合成间规聚苯乙烯 ｂ 聚丙烯嵌段共聚物．丙烯先预聚，然后加入苯乙烯进行嵌段共聚合反应，具有较高的催化效率（９５００ｇＰ／ｇＴｉ）．研究了丙烯预聚合时间，共聚合反应温度、催化体系组份及浓度等聚合条件对嵌段共聚合反应的影响．共聚反应总产物经沸丁酮、沸庚烷和４０℃四氢呋喃（ＴＨＦ）等溶剂的连续抽提分离，发现嵌段共聚物主要存在于沸丁酮的可溶级份中．将各分离级份用１３Ｃ ＮＭＲ、Ｘ 射线衍射和ＤＳＣ等分析手段进行结构表征并加以讨论．     

单茂钛催化剂用于苯乙烯-乙烯嵌段共聚物的合成与表征

乙烯（Ｅ）与苯乙烯（Ｓ）的嵌段共聚合用自制的两种催化剂———茂基三呋喃甲氧基钛［ＣｐＴｉ（ＯＣＨ２Ｏ）３］和茂基三苄氧基钛［ＣｐＴｉ（ＯＣＨ２Ｐｈ）３］进行了研究．考察了促进剂三甲基铝（ＴＭＡ）及乙烯的预聚合时间对聚合结果的影响，发现不同的催化体系有不同的［ＴＭＡ］最佳值以及随着乙烯预聚合时间的延长总的催化效率降低．对嵌段共聚合产物用丁酮、四氢呋喃和氯仿连续萃取分离，得到四氢呋喃中的可溶级分即嵌段共聚物ＰＥ ｂ ｓＰＳ，它占总嵌段共聚合产物的４０ｗｔ％～６０ｗｔ％．对嵌段共聚物用ＤＳＣ、ＷＡＸＤ、ＦＴＩＲ和１３Ｃ ＮＭＲ等方法进行了表征．     

用SN型催化剂合成苯乙烯一丙烯嵌段共聚物的研究──Ⅰ．聚合条件对共聚合反应的影响

用稀土化合物改性的钛系载体催化剂（ＳＮ催化剂）进行苯乙烯和丙烯顺序嵌段共聚合（Ｓｅｑｕｅｎｔｉａｌｂｌｏｃｋｃｏｐｏｌｙｍｅｒｉｚａｔｉｏｎ）的研究．考察了苯乙烯预聚时间、单体比、外加给电子体（ＥＢ）、烷基铝浓度、催化剂浓度和聚合温度等条件对共聚合的影响．发现外加酯（ＥＢ）降低了共聚合反应催化活性，在ＥＢ／Ｔｉ摩尔比为５范围内，外酯有助于提高嵌段共聚物（ｉＰＳ—ｂ—ｉＰＰ）中ＰＳ段和ＰＰ段的等规度及增加苯乙烯链节含量．ＳＮ型催化剂对苯乙烯一丙烯嵌段共聚合有较高的催化活性，催化效率在１００ｇ聚合物／ｇ－Ｔｉ以上．共聚物通过溶剂革取分级除去均聚物后，所得嵌段共聚物中苯乙烯链节含量可在１５～８５ｍｏｌ％之间调节．其结构表征续见第ＩＩ报．     

茂钛化合物／改性MAO催化剂制备聚丙烯-b-间规聚苯乙烯嵌段共聚物

以五甲基环戊二烯基三苄氧基钛化合物 [Cp Ti(OBz) 3 ]为主催化剂 ,改性甲基铝氧烷作助催化剂 ,采用单体顺序投入法 ,合成了聚丙烯 b 间规聚苯乙烯嵌段共聚物 .外加三异丁基铝可以使活性中心的氧化态由Ti(Ⅳ )还原为Ti(Ⅲ ) ,从而提高苯乙烯共聚单体的转化率 .实验表明此催化体系对共聚物的合成具有较高活性 ,适宜的茂钛化合物浓度可阻止活性中心被丙烯预聚物包埋 .抽除残余丙烯气也可促进苯乙烯的共聚合 .对聚合产物进行溶剂连续萃取 ,可分离出嵌段共聚物 ,并用 13 CNMR和DSC进行结构表征     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Oxygen defect K2NiF4-type oxides: The compounds La2−xSrxCuO4−x2+δ

Oxygen defect K₂NiF₄-type oxides $\text{La}{}_{\mathrm{2?x}}\text{Sr}{}_{\mathrm{x}}\text{CuO}{}_{\mathrm{<mtext>4?</mtext><mtext>x</mtext><mtext>2</mtext><mtext>+\delta </mtext>}}$ have been synthesized for a wide composition range: 0 ≤ x ≤ 1.34. From the X-ray and electron diffraction study three domains have been characterized: orthorhombic compounds with La₂CuO₄ structure for 0 ≤ x < 0.10, tetragonal oxides similar to LaSrCuO₄ for 0.10 ≤ x < 1 and several superstructures derived from the tetragonal cell ( with n = 3, 4, 4.5, 5, 6) for 1 ≤ x ≤ 1.34. The compounds corresponding to 0 < x < 1 differ from the other oxides in that they are characterized by the presence of copper with two oxidation states: + 2 and + 3. A model structure for La_0.8Sr_1.2CuλO_3.4, in which copper has only the + 2 oxidation state, and for which the actual cell is tegragonal—a = 18.80₄ Å and c = 12.94 Å—has been established. The particular structural evolution of these compounds is discussed in terms of a competition between the capability of Cu(II) to be oxidized to Cu(III) and the ordering of oxygen vacancies.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

A study of the spinel materials LiTi2O4 and Li43Ti53O4 by photoelectron spectroscopy

HeI-excited valence-band ultraviolet photoelectron spectra and MgKα-excited Ti-2p X-ray photoelectron spectra are reported for the spinel materials LiTi₂O₄ and $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4$. The presence of a Fermi edge in the ultraviolet photoelectron spectrum of LiTi₂O₄ confirms the metallic nature of this material, although the measured density of states at the Fermi energy is much lower than that expected from an independent-electron interpretation of the magnetic susceptibility. This difference is attributed to a strong interaction of the conduction electrons with the lattice vibrations. The localization of conduction electrons that occurs in the final state in the Ti-2p X-ray photoelectron spectrum of LiTi₂O₄ is attributed to a Coulomb interaction with a core hole.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.