Thermal decomposition of the perfluorinated peroxides CF3OC(O)OOC(O)F and CF3OC(O)OOCF3

Gas phase thermal decomposition of CF(3)OC(O)OOC(O)F and CF(3)OC(O)OOCF(3) was studied at temperatures between 64 and 98 degrees C (CF(3)OC(O)OOC(O)F) and 130-165 degrees C (CF(3)OC(O)OOCF(3)) using FTIR spectroscopy to follow the course of the reaction. For both substances, the decompositions were studied with N(2) and CO as bath gases. The rate constants for the decomposition of CF(3)OC(O)OOC(O)F in nitrogen and carbon monoxide fit the Arrhenius equations k(N)2 = (3.1 +/- 0.1) x 10(15) exp[-(29.0 +/- 0.5 kcal mol(-1)/RT)] and k(CO) = (5.8 +/- 1.3) x 10(15) exp[-(29.4 +/- 0.5 kcal mol(-1)/RT)], and that for CF(3)OC(O)OOCF(3) fits the equation k = (9.0 +/- 0.9) x 10(13) exp[-(34.0 +/- 0.7 kcal mol(-1)/RT)] (all in units of inverted seconds). Rupture of the O-O bond was shown to be the rate-determining step for both peroxides, and bond energies of 29 +/- 1 and 34.0 +/- 0.7 kcal mol(-1) were obtained for CF(3)OC(O)OOC(O)F and CF(3)OC(O)OOCF(3). The heat of formation of the CF(3)OCO(2)(*) radical, which is a common product formed in both decompositions, was calculated by ab initio methods as -229 +/- 4 kcal mol(-1). With this value, the heat of formation of the title species and of CF(3)OC(O)OOC(O)OCF(3) could in turn be obtained as Delta(f) degrees (CF(3)OC(O)OOC(O)F) = -286 +/- 6 kcal mol(-1), Delta(f) degrees (CF(3)OC(O)OOCF(3)) = -341 +/- 6 kcal mol(-1), and Delta(f) degrees (CF(3)OC(O)OOC(O)OCF(3)) = -430 +/- 6 kcal mol(-1).     

Studies of the kinetics and thermochemistry of the forward and reverse reaction Cl + C6H6 = HCl + C6H5

The laser flash photolysis resonance fluorescence technique was used to monitor atomic Cl kinetics. Loss of Cl following photolysis of CCl4 and NaCl was used to determine k(Cl + C6H6) = 6.4 x 10(-12) exp(-18.1 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 578-922 K and k(Cl + C6D6) = 6.2 x 10(-12) exp(-22.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 635-922 K. Inclusion of literature data at room temperature leads to a recommendation of k(Cl + C6H6) = 6.1 x 10(-11) exp(-31.6 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) for 296-922 K. Monitoring growth of Cl during the reaction of phenyl with HCl led to k(C6H5 + HCl) = 1.14 x 10(-12) exp(+5.2 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 294-748 K, k(C6H5 + DCl) = 7.7 x 10(-13) exp(+4.9 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 292-546 K, an approximate k(C6H5 + C6H5I) = 2 x 10(-11) cm(3) molecule(-1) s(-1) over 300-750 K, and an upper limit k(Cl + C6H5I) < or = 5.3 x 10(-12) exp(+2.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 300-750 K. Confidence limits are discussed in the text. Third-law analysis of the equilibrium constant yields the bond dissociation enthalpy D(298)(C6H5-H) = 472.1 +/- 2.5 kJ mol(-1) and thus the enthalpy of formation Delta(f)H(298)(C6H5) = 337.0 +/- 2.5 kJ mol(-1).     

Bimolecular kinetic studies with high-temperature gas-phase 19F NMR: cycloaddition reactions of fluoroolefins

A gas-phase NMR kinetic technique has been used for the first time to obtain accurate measurements of rate constants of some bimolecular, second-order cycloaddition reactions. As a test of the potential use of this technique for the study of second-order reactions, the rate constants and the activation parameters for the cyclodimerization reactions of chlorotrifluoroethylene (CTFE) and tetrafluoroethylene (TFE) were determined in the temperature range 240-340 degrees C, using a commercial high-temperature NMR probe. Obtaining excellent agreement of the results with published data, the technique was then applied to the reaction of 1,1-difluoroallene with 1,3-butadiene, the results of which indicate that the use of gas-phase NMR for reaction kinetics is particularly valuable when a reagent is available only in small amounts and in cases where there are several competing processes occurring simultaneously. The major processes observed in this reaction are regioselective [2+2] and [2+4] cycloadditions, whose rates and activation parameters were determined [k2 = 9.3 x 10(6) exp(-20.1 kcal x mol(-1)/RT) L/mol(-1) x s(-1) and k3 = 1.2 x 10(6) exp(-18.4 kcal x mol(-1)/RT) L/mol(-1) x s(-)(1), respectively] in the temperature range 130-210 degrees C.     

Kinetics of the reactions of O(3P) with CCl2=CH2, (Z)-CHCl=CHCl, and CCl2=CCl2: a temperature dependence study

Absolute rate coefficients for the gas-phase reactions of ground-state oxygen atoms with CCl(2)=CH(2) (1), (Z)-CHCl=CHCl (2) and CCl(2)=CCl(2) (3) have been measured directly using the fast flow discharge technique. The experiments were carried out under pseudo-first-order conditions with [O((3)P)](0) < [chloroethene](0). The temperature dependences of the reactions of O((3)P) with CCl(2)=CH(2), (Z)-CHCl=CHCl and CCl(2)=CCl(2) were studied in the range 298-359 K. The kinetic data obtained were used to derive the following Arrhenius expressions (in units of cm(3) molecule(-1) s(-1)): k(1) = (1.82 +/- 1.29) x 10(-11) exp[-(12.63 +/- 0.97) x 10(3)/RT], k(2) = (1.56 +/- 0.92) x 10(-11) exp[-(16.68 +/- 1.54) x 10(3)/RT], k(3) = (4.63 +/- 1.38) x 10(-11) exp[-(19.59 +/- 3.21) x 10(3)/RT]. This is the first temperature dependence study of the reactions of O((3)P) atoms with (Z)-CHCl=CHCl and CCl(2)=CCl(2). All the rate coefficients display a positive temperature dependence and pressure independence, which points to the importance of the irreversibility of the addition mechanism for these reactions. The obtained rate coefficients are compared with previous studies carried out mainly at room temperature. The rates of addition of O atoms and OH radicals to the double bond of alkenes at 298 K are related by the expression: log k(OH) = 0.57278 log k(O(3P)) - 4.095. A correlation is presented between the reactivity of chloroethenes toward O atoms and the second-order perturbational term of the frontier molecular orbital theory which carries the contribution of the different atomic orbitals to the HOMO of the chloroethene. To a first approximation, this correlation allows room-temperature rate coefficients to be predicted within +/-25-30% of the measured values.     

A kinetic study of the reactions of vanadium, iron, and cobalt with sulfur dioxide

A kinetic study of the reactions of ground state V, Fe, and Co with SO2 is reported. V, Fe, and Co were produced by the 248 nm photodissociation of VCl4, ferrocene, and Co(C5H5)(CO)2, respectively, and were detected by laser-induced fluorescence. V + SO2 proceeds by an abstraction reaction with rate constants given by k=(2.33 +/- 0.57)x 10(-10) exp[-(1.14 +/- 0.19) kcal mol(-1)/RT] cm3 molecule(-1) s(-1) over the temperature range 296-571 K. Fe + SO2 was studied in the N2 buffer range of 10-185 Torr between 294 and 498 K. The limiting, low-pressure third-order rate constants are given by k(0)=(3.45 +/- 1.19)x 10(-30) exp[-(2.81 +/- 0.24) kcal mol(-1)/RT] cm6 molecule(-2) s(-1). Co + SO2 was studied in the CO2 buffer range of 5-40 Torr between 294 and 498 K. This reaction is independent of temperature over the indicated range and has a third-order rate constant of k0=(5.23 +/- 0.28)x 10(-31) cm6 molecule(-2) s(-1). Results of this work are compared to previous work on the Sc, Ti, Cr, Mn, and Ni + SO2 systems. The reaction efficiencies for the abstraction reactions depend on the ionization energies of the transition metal atoms and on the reaction exothermicities, and the reaction efficiencies of the association reactions are strongly dependent on the energies needed to promote an electron from a 4s2 configuration to a 4s1 configuration.     

High pressure pyrolysis of toluene. 1. Experiments and modeling of toluene decomposition

The pyrolysis of toluene, the simplest methyl-substituted aromatic molecule, has been studied behind reflected shock waves using a single pulse shock tube. Experiments were performed at nominal high pressures of 27 and 45 bar and spanning a wide temperature range from 1200 to 1900 K. A variety of stable species, ranging from small hydrocarbons to single ring aromatics (principal soot precursors such as phenylacetylene and indene) were sampled from the shock tube and analyzed using standard gas chromatographic techniques. A detailed chemical kinetic model with 262 reactions and 87 species was assembled to simulate the stable species profiles (specifically toluene, benzene and methane) from the current high-pressure pyrolysis data sets and shock tube-atomic resonance absorption spectrometry (ARAS) H atom profiles obtained from prior toluene pyrolysis experiments performed under similar high-temperature conditions and lower pressures from 1.5 to 8 bar. The primary steps in toluene pyrolysis represent the most sensitive and dominant reactions in the model. Consequently, in the absence of unambiguous direct experimental measurements, we have utilized recent high level theoretical estimates of the barrierless association rate coefficients for these primary reactions, C6H5 + CH3 --> C6H5CH3 (1a) and C6H5CH2 + H --> C6H5CH3 (1b) in the detailed chemical kinetic model. The available data sets can be successfully reconciled with revised values for deltaH0f(298K)(C6H5CH2) = 51.5 +/- 1.0 kcal/mol and deltaH0f(298K)(C6H5) = 78.6 +/- 1.0 kcal/mol that translate to primary dissociation rate constants, reverse of 1a and 1b, represented by k(-1a,infinity) = (4.62 x 10(25))T(-2.53)exp[-104.5 x 10(3)/RT] s(-1) and k(-1b,infinity) = (1.524 x 10(16))T(-0.04)exp[-93.5 x 10(3)/RT] s(-1) (R in units of cal/(mol K)). These high-pressure limiting rate constants suggest high-temperature branching ratios for the primary steps that vary from 0.39 to 0.52 over the temperature range 1200-1800 K.     

Desorption of polycyclic aromatic hydrocarbons from soot surface: pyrene and fluoranthene

The kinetics of thermal desorption of two four-ring polycyclic aromatic hydrocarbons, fluoranthene, and pyrene from well-characterized laboratory-generated kerosene soot surface was studied over the temperature range 260-320 K in a low-pressure flow reactor combined with an electron-impact mass spectrometer. Two methods were used to measure the desorption rate constants: monitoring of the surface-bound fluoranthene and pyrene decays due to desorption using off-line HPLC measurements of their concentrations in soot samples, and monitoring of the desorbed molecules in the gas phase using in situ mass spectrometric detection. Results obtained with the two methods were in good agreement and yielded the following Arrhenius expressions for the desorption rate constants: k(des) (fluoranthene) = 4 x 10(14) exp[-(93900 +/- 1700)/RT] and k(des) (pyrene) = 6 x 10(14) exp[-(95200 +/- 1800)/RT] (k(des) are in units of s(-1), and activation energies are in J mol(-1)). In addition, the combined uptake coefficient of fluoranthene and pyrene on soot (calculated using specific surface area) was estimated to be near 5 x 10(-3) at T = 310 K.     

Quantum chemical study of the mechanism of reaction between NH (X 3sigma-) and H2, H2O, and CO2 under combustion conditions

Reactions of ground-state NH (3sigma-) radicals with H2, H2O, and CO2 have been investigated quantum chemically, whereby the stationary points of the appropriate reaction potential energy surfaces, that is, reactants, products, intermediates, and transition states, have been identified at the G3//B3LYP level of theory. Reaction between NH and H2 takes place via a simple abstraction transition state, and the rate coefficient for this reaction as derived from the quantum chemical calculations, k(NH + H2) = (1.1 x 10(14)) exp(-20.9 kcal mol(-1)/RT) cm3 mol(-1) s(-1) between 1000 and 2000 K, is found to be in good agreement with experiment. For reaction between triplet NH and H2O, no stable intermediates were located on the triplet reaction surface although several stable species were found on the singlet surface. No intersystem crossing seam between triplet NH + H2O and singlet HNO + H2 (the products of lowest energy) was found; hence there is no evidence to support the existence of a low-energy pathway to these products. A rate coefficient of k(NH + H2O) = (6.1 x 10(13)) exp(-32.8 kcal mol(-1)/RT) cm3 mol(-1) s(-1) between 1000 and 2000 K for the reaction NH (3sigma-) + H2O --> NH2 (2B) + OH (2pi) was derived from the quantum chemical results. The reverse rate coefficient, calculated via the equilibrium constant, is in agreement with values used in modeling the thermal de-NO(x) process. For the reaction between triplet NH and CO2, several stable intermediates on both triplet and singlet reaction surfaces were located. Although a pathway from triplet NH + CO2 to singlet HNO + CO involving intersystem crossing in an HN-CO2 adduct was discovered, no pathway of sufficiently low activation energy was discovered to compare with that found in an earlier experiment [Rohrig, M.; Wagner, H. G. Proc. Combust. Inst. 1994, 25, 993.].     

Kinetic studies of the reactions of O2(b 1sigma(g)+) with several atmospheric molecules

Thermal rate coefficients for the removal (reaction + quenching) of O2(1sigma(g)+) by collision with several atmospheric molecules were determined to be as follows: O3, k3(210-370 K) = (3.63 +/- 0.86) x 10(-11) exp((-115 +/- 66)/T); H2O, k4(250-370 K) = (4.52 +/- 2.14) x 10(-12) exp((89 +/- 210)/T); N2, k5(210-370 K) = (2.03 +/- 0.30) x 10(-15) exp((37 +/- 40)/T); CO2, k6(298 K) = (3.39 +/- 0.36) x 10(-13); CH4, k7(298 K) = (1.08 +/- 0.11) x 10(-13); CO, k8(298 K) = (3.74 +/- 0.87) x 10(-15); all units in cm3 molecule(-1) s(-1). O2(1sigma(g)+) was produced by directly exciting ground-state O2(3sigma(g)-) with a 762 nm pulsed dye laser. The reaction of O2(1sigma(g)+) with O3 was used to produce O(3P), and temporal profiles of O(3P) were measured using VUV atomic resonance fluorescence in the presence of the reactant to determine the rate coefficients for removal of O2(1sigma(g)+). Our results are compared with previous values, where available, and the overall trend in the O2(1sigma(g)+) removal rate coefficients and the atmospheric implications of these rate coefficients are discussed. Additionally, an upper limit for the branching ratio of O2(1sigma(g)+) + CO to give O(3P) + CO2 was determined to be < or = 0.2% and this reaction channel is shown to be of negligible importance in the atmosphere.     

Rate coefficients for the reaction of OH with (E)-2-pentenal, (E)-2-hexenal, and (E)-2-heptenal

Rate coefficients for the gas-phase reaction of the OH radical with (E)-2-pentenal (CH(3)CH(2)CH[double bond]CHCHO), (E)-2-hexenal (CH(3)(CH(2))(2)CH[double bond]CHCHO), and (E)-2-heptenal (CH(3)(CH(2))(3)CH[double bond]CHCHO), a series of unsaturated aldehydes, over the temperature range 244-374 K at pressures between 23 and 150 Torr (He, N(2)) are reported. Rate coefficients were measured under pseudo-first-order conditions in OH with OH radicals produced via pulsed laser photolysis of HNO(3) or H(2)O(2) at 248 nm and detected by pulsed laser-induced fluorescence. The rate coefficients were independent of pressure and the room temperature rate coefficients and Arrhenius expressions obtained are (cm(3) molecule(-1) s(-1) units): k(1)(297 K)=(4.3 +/- 0.6)x 10(-11), k(1)(T)=(7.9 +/- 1.2)x 10(-12) exp[(510 +/- 20)/T]; k(2)(297 K)=(4.4 +/- 0.5)x 10(-11), k(2)(T)=(7.5 +/- 1.1)x 10(-12) exp[(520 +/- 30)/T]; and k(3)(297 K)=(4.4 +/- 0.7)x 10(-11), k(3)(T)=(9.7 +/- 1.5)x 10(-12) exp[(450 +/- 20)/T] for (E)-2-pentenal, (E)-2-hexenal and (E)-2-heptenal, respectively. The quoted uncertainties are 2sigma(95% confidence level) and include estimated systematic errors. Rate coefficients are compared with previously published room temperature values and the discrepancies are discussed. The atmospheric degradation of unsaturated aldehydes is also discussed.     

A kinetic and product study of the Cl + HO2 reaction

Absolute rate data and product branching ratios for the reactions Cl + HO2 --> HCl + O2 (k1a) and Cl + HO2 --> OH + ClO (k1b) have been measured from 226 to 336 K at a total pressure of 1 Torr of helium using the discharge flow resonance fluorescence technique coupled with infrared diode laser spectroscopy. For kinetic measurements, pseudo-first-order conditions were used with both reagents in excess in separate experiments. HO2 was produced by two methods: through the termolecular reaction of H atoms with O2 and also by the reaction of F atoms with H2O2. Cl atoms were produced by a microwave discharge of Cl2 in He. HO2 radicals were converted to OH radicals prior to detection by resonance fluorescence at 308 nm. Cl atoms were detected directly at 138 nm also by resonance fluorescence. Measurement of the consumption of HO2 in excess Cl yielded k1a and measurement of the consumption of Cl in excess HO2 yielded the total rate coefficient, k1. Values of k1a and k1 derived from kinetic experiments expressed in Arrhenius form are (1.6 +/- 0.2) x 10(-11) exp[(249 +/- 34)/T] and (2.8 +/- 0.1) x 10(-11) exp[(123 +/- 15)/T] cm3 molecule(-1) s(-1), respectively. As the expression for k1 is only weakly temperature dependent, we report a temperature-independent value of k1 = (4.5 +/- 0.4) x 10(-11) cm3 molecule(-1) s(-1). Additionally, an Arrhenius expression for k1b can also be derived: k1b = (7.7 +/- 0.8) x 10(-11) exp[-(708 +/- 29)/T] cm3 molecule(-1) s(-1). These expressions for k1a and k1b are valid for 226 K < or = T < or = 336 and 256 K < or = T < or = 296 K, respectively. The cited errors are at the level of a single standard deviation. For the product measurements, an excess of Cl was added to known concentrations of HO2 and the reaction was allowed to reach completion. HCl product concentrations were determined by IR absorption yielding the ratio k1a/k1 over the temperature range 236 K < or = T < or = 296 K. OH product concentrations were determined by resonance fluorescence giving rise to the ratio k1b/k1 over the temperature range 226 K < or = T < or = 336 K. Both of these ratios were subsequently converted to absolute numbers. Values of k1a and k1b from the product experiments expressed in Arrhenius form are (1.5 +/- 0.1) x 10(-11) exp[(222 +/- 17)/T] and (10.6 +/- 1.5) x 10(-11) exp[-(733 +/- 41)/T] cm3 molecule(-1) s(-1), respectively. These expressions for k1a and k1b are valid for 256 K < or = T < or = 296 and 226 K < or = T < or = 336 K, respectively. A combination of the kinetic and product data results in the following Arrhenius expressions for k1a and k1b of (1.4 +/- 0.3) x 10(-11) exp[(269 +/- 58)/T] and (12.7 +/- 4.1) x 10(-11) exp[-(801 +/- 94)/T] cm3 molecule(-1) s(-1), respectively. Numerical simulations were used to check for interferences from secondary chemistry in both the kinetic and product experiments and also to quantify the losses incurred during the conversion process HO2 --> OH for detection purposes.     

Rate coefficients and equilibrium constant for the CH2CHO + O2 reaction system

The kinetics of the CH2CHO + O2 reaction was experimentally studied in two quasi-static reactors and a discharge flow-reactor at temperatures ranging from 298 to 660 K and pressures between 1 mbar and 46 bar with helium as the bath gas. The CH2CHO radicals were produced by the laser-flash photolysis of ethyl vinyl ether at 193 nm and by the reaction F + CH3CHO, respectively. Laser-induced fluorescence excited at 337 or 347.4 nm was used to monitor the CH2CHO concentration. The reaction proceeded via reversible complex formation with subsequent isomerization and fast decomposition: CH2CHO + O2 <= => O2CH2CHO --> HO2CH2CO --> products. The rate coefficients for the first and second steps were determined (k1, k-1, k2) and analyzed by a master equation with specific rate coefficients from the Rice-Ramsperger-Kassel-Marcus (RRKM) theory. Molecular and transition-state parameters were obtained from quantum chemical calculations. A third-law analysis led to the following thermodynamic parameters for the first step: Delta(R)S degrees 300K(1) = -144 J K(-1) mol(-1) (1 bar) and Delta(R)H degrees 300K(1) = (-101 +/- 4) kJ mol(-1). From the falloff analysis, the following temperature dependencies for the low- and high-pressure limiting rate coefficients were obtained: k1(0) = 5.14 x 10(-14) exp(210 K/T) cm(-3) s(-1); k1(infinity) = 1.7 x 10(-12) exp(-520 K/T) cm(-3) s(-1); and k2(infinity) = 1.3 x 10(12) exp[-(82 +/- 4) kJ mol(-1)/RT] s(-1). Readily applicable analytical representations for the pressure and temperature dependence of k1 were derived to be used in kinetic modeling.     

Reactions of SO3 with the O/H radical pool under combustion conditions

The reactions of SO3 with H, O, and OH radicals have been investigated by ab initio calculations. For the SO3 + H reaction (1), the lowest energy pathway involves initial formation of HSO3 and rearrangement to HOSO2, followed by dissociation to OH + SO2. The reaction is fast, with k(1) = 8.4 x 10(9)T(1.22) exp(-13.9 kJ mol(-1)/RT) cm(3) mol(-1) s(-1) (700-2000 K). The SO3 + O --> SO2 + O2 reaction (2) may proceed on both the triplet and singlet surfaces, but due to a high barrier the reaction is predicted to be slow. The rate constant can be described as k(2) = 2.8 x 10(4)T(2.57) exp(-122.3 kJ mol(-1)/RT) cm(3) mol(-1) s(-1) for T > 1000 K. The SO3 + OH reaction to form SO2 + HO2 (3) proceeds by direct abstraction but is comparatively slow, with k(3) = 4.8 x 10(4)T(2.46) exp(-114.1 kJ mol(-) 1/RT) cm(3) mol(-1) s(-1) (800-2000 K). The revised rate constants and detailed reaction mechanism are consistent with experimental data from batch reactors, flow reactors, and laminar flames on oxidation of SO2 to SO3. The SO3 + O reaction is found to be insignificant during most conditions of interest; even in lean flames, SO3 + H is the major consumption reaction for SO3.     

Ultra-fast rotors for molecular machines and functional materials via halogen bonding: crystals of 1,4-bis(iodoethynyl)bicyclo[2.2.2]octane with distinct gigahertz rotation at two sites

As a point of entry to investigate the potential of halogen-bonding interactions in the construction of functional materials and crystalline molecular machines, samples of 1,4-bis(iodoethynyl)bicyclo[2.2.2]octane (BIBCO) were synthesized and crystallized. Knowing that halogen-bonding interactions are common between electron-rich acetylenic carbons and electron-deficient iodines, it was expected that the BIBCO rotors would be an ideal platform to investigate the formation of a crystalline array of molecular rotors. Variable temperature single crystal X-ray crystallography established the presence of a halogen-bonded network, characterized by lamellarly ordered layers of crystallographically unique BIBCO rotors, which undergo a reversible monoclinic-to-triclinic phase transition at 110 K. In order to elucidate the rotational frequencies and the activation parameters of the BIBCO molecular rotors, variable-temperature (1)H wide-line and (13)C cross-polarization/magic-angle spinning solid-state NMR experiments were performed at temperatures between 27 and 290 K. Analysis of the (1)H spin-lattice relaxation and second moment as a function of temperature revealed two dynamic processes simultaneously present over the entire temperature range studied, with temperature-dependent rotational rates of k(rot) = 5.21 × 10(10) s(-1)·exp(-1.48 kcal·mol(-1)/RT) and k(rot) = 8.00 × 10(10) s(-1)·exp(-2.75 kcal·mol(-1)/RT). Impressively, these correspond to room temperature rotational rates of 4.3 and 0.8 GHz, respectively. Notably, the high-temperature plastic crystalline phase I of bicyclo[2.2.2]octane has a reported activation energy of 1.84 kcal·mol(-1) for rotation about the 1,4 axis, which is 24% larger than E(a) = 1.48 kcal·mol(-1) for the same rotational motion of the fastest BIBCO rotor; yet, the BIBCO rotor has three fewer degrees of translational freedom and two fewer degrees of rotational freedom! Even more so, these rates represent some of the fastest engineered molecular machines, to date. The results of this study highlight the potential of halogen bonding as a valuable construction tool for the design and the synthesis of amphidynamic artificial molecular machines and suggest the potential of modulating properties that depend on the dielectric behavior of crystalline media.     

Rate coefficients for the reactions of OH with CF3CH2CH3 (HFC-263fb), CF3CHFCH2F (HFC-245eb), and CHF2CHFCHF2 (HFC-245ea) between 238 and 375 K

Rate coefficients for reaction of the hydroxyl radical (OH) with three hydrofluorocarbons (HFCs) CF3CH2CH3, HFC-263fb, (k1); CF3CHFCH2F, HFC-245eb, (k2); and CHF2CHFCHF2, HFC-245ea, (k3); which are suggested as potential substitutes to chlorofluorocarbons (CFCs), were measured using pulsed laser photolysis-laser-induced fluorescence (PLP-LIF) between 235 and 375 K. The Arrhenius expressions obtained are k1(T) = (4.36 +/- 0.72) x 10(-12) exp[-(1290 +/- 40)/T] cm3 molecule(-1) s(-1); k2(T) = (1.23 +/- 0.18) x 10(-12) exp[-(1250 +/- 40)/T] cm3 molecule(-1) s(-1); k3(T) = (1.91 +/- 0.42) x 10(-12) exp[-(1375 +/- 100)/T] cm3 molecule(-1) s(-1). The quoted uncertainties are 95% confidence limits and include estimated systematic errors. The present results are discussed and compared with rate coefficients available in the literature. Our results are also compared with those calculated using structure activity relationships (SAR) for fluorinated compounds. The IR absorption cross-sections at room temperature for these compounds were measured over the range of 500 to 4000 cm-1. The global warming potentials (GWPs) of CF3CH2CH3(HFC-263fb), CF3CHFCH2F(HFC-245eb), and CHF2CHFCHF2(HFC-245ea) were calculated to be 234, 962, and 723 for a 20-year horizon; 70, 286, and 215 for a 100-year horizon; and 22, 89, and 68 for a 500-year horizon; and the atmospheric lifetimes of these compounds are 0.8, 2.5, and 2.6 years, respectively. It is concluded that these compounds are acceptable substitutes for CFCs in terms of their impact on Earth's climate.     

Activation of the sulfhydryl group by Mo centers: kinetics of reaction of benzyl radical with a binuclear Mo(micro-SH)Mo complex and with arene and alkane thiols

This paper provides evidence from kinetic experiments and electronic structure calculations of a significantly reduced S-H bond strength in the Mo(micro-SH)Mo function in the homogeneous catalyst model, CpMo(micro-S)(2)(micro-SH)(2)MoCp (1, Cp = eta(5)-cyclopentadienyl). The reactivity of 1 was explored by determination of a rate expression for hydrogen atom abstraction by benzyl radical from 1 (log(k(abs)/M(-)(1) s(-)(1)) = (9.07 +/- 0.38) - (3.62 +/- 0.58)/theta) for comparison with expressions for CH(3)(CH(2))(7)SH, log(k(abs)/M(-)(1) s(-)(1)) = (7.88 +/- 0.35) - (4.64 +/- 0.54)/theta, and for 2-mercaptonaphthalene, log(k(abs)/M(-)(1) s(-)(1)) = (8.21 +/- 0.17) - (4.24 +/- 0.26)/theta (theta = 2.303RT kcal/mol, 2sigma error). The rate constant for hydrogen atom abstraction at 298 K by benzyl radical from 1 is 2 orders of magnitude greater than that from 1-octanethiol, resulting from the predicted (DFT) S-H bond strength of 1 of 73 kcal/mol. The radical CpMo(micro-S)(3)(micro-SH)MoCp, 2, is revealed, from the properties of slow self-reaction, and exclusive cross-combination with reactive benzyl radical, to be a persistent free radical.     

Theoretical prediction of the heats of formation of C2H5O* radicals derived from ethanol and of the kinetics of beta-C-C scission in the ethoxy radical

Thermochemical parameters of three C(2)H(5)O* radicals derived from ethanol were reevaluated using coupled-cluster theory CCSD(T) calculations, with the aug-cc-pVnZ (n = D, T, Q) basis sets, that allow the CC energies to be extrapolated at the CBS limit. Theoretical results obtained for methanol and two CH(3)O* radicals were found to agree within +/-0.5 kcal/mol with the experiment values. A set of consistent values was determined for ethanol and its radicals: (a) heats of formation (298 K) DeltaHf(C(2)H(5)OH) = -56.4 +/- 0.8 kcal/mol (exptl: -56.21 +/- 0.12 kcal/mol), DeltaHf(CH(3)C*HOH) = -13.1 +/- 0.8 kcal/mol, DeltaHf(C*H(2)CH(2)OH) = -6.2 +/- 0.8 kcal/mol, and DeltaHf(CH(3)CH(2)O*) = -2.7 +/- 0.8 kcal/mol; (b) bond dissociation energies (BDEs) of ethanol (0 K) BDE(CH(3)CHOH-H) = 93.9 +/- 0.8 kcal/mol, BDE(CH(2)CH(2)OH-H) = 100.6 +/- 0.8 kcal/mol, and BDE(CH(3)CH(2)O-H) = 104.5 +/- 0.8 kcal/mol. The present results support the experimental ionization energies and electron affinities of the radicals, and appearance energy of (CH(3)CHOH+) cation. Beta-C-C bond scission in the ethoxy radical, CH(3)CH2O*, leading to the formation of C*H3 and CH(2)=O, is characterized by a C-C bond energy of 9.6 kcal/mol at 0 K, a zero-point-corrected energy barrier of E0++ = 17.2 kcal/mol, an activation energy of Ea = 18.0 kcal/mol and a high-pressure thermal rate coefficient of k(infinity)(298 K) = 3.9 s(-1), including a tunneling correction. The latter value is in excellent agreement with the value of 5.2 s(-1) from the most recent experimental kinetic data. Using RRKM theory, we obtain a general rate expression of k(T,p) = 1.26 x 10(9)p(0.793) exp(-15.5/RT) s(-1) in the temperature range (T) from 198 to 1998 K and pressure range (p) from 0.1 to 8360.1 Torr with N2 as the collision partners, where k(298 K, 760 Torr) = 2.7 s(-1), without tunneling and k = 3.2 s(-1) with the tunneling correction. Evidence is provided that heavy atom tunneling can play a role in the rate constant for beta-C-C bond scission in alkoxy radicals.     

Rate coefficients for the reaction of OH with a series of unsaturated alcohols between 263 and 371 K

Rate coefficients for the gas-phase reactions of OH radicals with four unsaturated alcohols, 3-methyl-3-buten-1-ol (k1), 2-buten-1-ol (k2), 2-methyl-2-propen-1-ol (k3) and 3-buten-1-ol (k4), were measured using two different techniques, a conventional relative rate method and the pulsed laser photolysis-laser induced fluorescence technique. The Arrhenius rate coefficients (in units of cm(3) molecule(-1) s(-1)) over the temperature range 263-371 K were determined from the kinetic data obtained as k1 = (5.5 +/- 1.0) x 10(-12) exp [(836 +/- 54)/T]; k2 = (6.9 +/- 0.9) x 10(-12) exp [(744 +/- 40)/T]; k3 = (10 +/- 1) x 10(-12) exp [(652 +/- 27)/T]; and k4 = (4.0 +/- 0.4) x 10(-12) exp [(783 +/- 32)/T]. At 298 K, the rate coefficients obtained by the two methods for each of the alcohols studied were in good agreement. The results are presented and compared with those obtained previously for the same and related reactions of OH radicals. Reactivity factors for substituent groups containing the hydroxyl group are determined. The atmospheric implications for the studied alcohols are considered briefly.     

High-temperature reactions of OH radicals with benzene and toluene

The rate constants for the reactions of OH radicals with benzene and toluene have been measured directly by a shock tube/pulsed laser-induced fluorescence imaging method at high temperatures. The OH radicals were generated by the thermal decomposition of nitric acid or tert-butyl hydroperoxide. The derived Arrhenius expressions for the rate constants were k(OH + benzene) = 8.0 x 10(-11) exp(-26.6 kJ mol(-1)/RT) [908-1736 K] and k(OH + toluene) = 8.9 x 10(-11) exp(-19.7 kJ mol(-1)/RT) [919-1481 K] in the units of cubic centimeters per molecule per second. Transition-state theory (TST) calculations based on quantum chemically predicted energetics confirmed the dominance of the H-atom abstraction channel for OH + benzene and the methyl-H abstraction channel for OH + toluene in the experimental temperature range. The TST calculation indicated that the anharmonicity of the C-H-O bending vibrations of the transition states is essential to reproduce the observed rate constants. Possible implications to the other analogous H-transfer reactions were discussed.     

Photochemical and thermal reactions of intermediates in the phenylnitrene rearrangement inside a hemicarcerand

Broadband irradiation (lambda > 320 nm) of hemicarceplex H(.)1 between -74 degrees C and -84 degrees C, produces encapsulated didehydroazepine (2), triplet phenylnitrene ((3)PN), 2-azabicyclo[3.2.0]hepta-1,3,6-triene (6), and 4-azaspiro[2.4]hepta-1,4,6-triene (7). The highly strained anti-Bredt imine 6 is formed from 2 via a photochemical four-electron electrocyclization. Under the irradiation conditions, 6 rearranges further to azaspirene 7. In addition, 6 thermally rearranges to 7 via a 1,5-sigmatropic shift (DeltaG(267K) = 20.0 +/- 0.5 kcal/mol), yielding a final equilibrium composed of [7]/[6] = 5 at room temperature. The observation of a photochemical rearrangement of 2 to 6 contrasts earlier results of narrow band irradiations (lambda = 334 nm) of matrix-isolated 2, which gave (3)PN (Hayes, J. C.; Sheridan, R. S. J. Am. Chem. Soc. 1990, 112, 5879-5881). Encapsulated (3)PN is remarkably stable due to the prevention of its dimerization by the surrounding hemicarcerand. Above 255 K, it slowly decays with a rate constant k = 10(7.7+/-0.4) s(-1) x exp {(13300 +/- 500 cal/mol)/RT}. The isolation of substantial amounts of a hemicarcerand lacking one acetal spanner suggests that (3)PN decays preferentially by inserting into an inward-pointing acetal C-H bond of H.