Enhanced thermal stability and structural ordering in short chain <Emphasis Type="Italic">n</Emphasis>-alkanethiol monolayers on gold probed by vibrational spectroscopy and EQCM

Monolayers of alkanethiols with varied chain lengths, CH₃(CH₂)_nSH where n = 3, 5, and 7, on gold substrates have been prepared by adsorption from (1) neat thiol, (2) millimolar thiol solution in alcohol (conventional method), and (3) potential-controlled adsorption. Reflection absorption infrared spectroscopy (RAIRS) and electrochemical quartz crystal microbalance (EQCM) have been used to characterize the integrity of the monolayers. Methylene and methyl stretching modes along with C–S stretching modes have been used as benchmarks to follow the order–disorder transitions in the monolayer structure, in the temperature range from 25 to 175 °C. Monolayers adsorbed from neat thiol show superior quality in terms of stability and structural arrangement. Short chain thiols with n = 3, 5, and 7 do show substantial stability. The possibility of multilayer formation is ruled out by EQCM studies comparing the frequency and mass change associated with the monolayer desorption. Self-assembled monolayers (SAMs) adsorbed under potential control behave very similarly to the monolayers adsorbed from neat thiol as far as stability and structural orientation are concerned, irrespective of the chain length. The adsorption from neat thiol gets rid of the solvent-induced defects and arrests the propagation of defects under temperature constraints.     

Electron Transfer through Monolayers of Mixed Long-chain Aliphatic Acids and Alcohols

Properties of monolayers of cetyl, stearyl, and eicosyl alcohols and stearic and behenic acids and their mixtures are studied, along with the kinetics of a redox reaction of hemin adsorbed on these monolayers. Three-dimensional computer models of corresponding monolayers are constructed and compared with their electrochemical behavior. Properties of monolayers of cetyl alcohol in acid and alkaline solutions and stearyl alcohol in acid solutions correspond to package of molecules in a stretched conformation oriented normally to the electrode surface; for the other one-component systems, the monolayer structure is less regular. The hemin redox reaction rate has no correlation whatsoever with the monolayer thickness and is defined by the length of the electron transfer path (over a chain of covalent bonds and through van der Waals contacts between molecules). The stronger the deviation of the conformation of molecules from the stretched one, the shorter the effective path of the electron transfer. In mixed films of stearic acid and cetyl alcohol (1 : 6), it is sometimes possible to keep molecules of stearic acid in a stretched conformation, thus inhibiting the electron transfer along the hydrocarbon chain of this molecule to a maximum extent. The other mixed systems, while making the conformation more stretched, fail to provide for a completely regular structure.     

Self-Assembled Monolayers of Organoselenium Compounds on Gold: Surface-Enhanced Raman Scattering Study

To understand the binding nature of organoselenium compounds on gold, we have examined the adsorption behavior of several representative organoselenium compounds, i.e., benzeneselenol (BSe), diphenyl diselenide, dibenzyl diselenide, dioctyl diselenide, and benzyl phenyl selenide (BPSe) on the Au surface by virtue of surface-enhanced Raman spectroscopy (SERS). BSe chemisorbs on gold as selenolate with a tilted orientation. Upon adsorption, the Se–Se bonds of diselenides are cleaved to form selenolates, analogous to the formation of thiolate monolayers from disulfides. BPSe adsorbs on gold without any C–Se bond scission. The benzyl moiety of BPSe assumes a rather vertical stance while the phenyl moiety is more tilted to the gold surface.     

Interactions of doxorubicin with self-assembled monolayer-modified electrodes: electrochemical, surface plasmon resonance (SPR), and gravimetric studies

We present the results on the partitioning of doxorubicin (DOX), a potent anticancer drug, through the model membrane system, self-assembled monolayers (SAMs) on gold electrodes. The monolayers were formed from alkanethiols of comparable length with different ω-terminal groups facing the aqueous electrolyte: the hydrophobic -CH(3) groups for the case of dodecanethiol SAMs or hydrophilic -OH groups of mercaptoundecanol SAMs. The electrochemical experiments combined with the surface plasmon resonance (SPR) and gravimetric studies show that doxorubicin is likely adsorbed onto the surface of hydrophilic monolayer, while for the case of the hydrophobic one the drug mostly penetrates the monolayer moiety. The adsorption of the drug hinders further penetration of doxorubicin into the monolayer moiety.     

Electroreduction of oxygen on octadecylmercaptan self-assembled monolayers

The reduction of oxygen has been studied on octadecylmercaptan self-assembled monolayers adsorbed on gold substrates in borate buffer solutions with a rotating disc electrode. A great inhibition of the oxygen reduction and other electrochemical reactions by these monolayers has been found. However, after polarisation at -0.80 V(SHE) the protecting properties of the film against electron transfer reactions are lost, and a behaviour similar to bare gold is observed. Ex situ XPS indicates that the thiol monolayer has not been desorbed to a large extent during oxygen reduction. Disorders of the monolayer structure and desorption of thiol molecules are proposed as the main reasons for the accessibility of electrochemical reactions to the surface.     

Electroreduction of oxygen on octadecylmercaptan self-assembled monolayers

The reduction of oxygen has been studied on octadecylmercaptan self-assembled monolayers adsorbed on gold substrates in borate buffer solutions with a rotating disc electrode. A great inhibition of the oxygen reduction and other electrochemical reactions by these monolayers has been found. However, after polarisation at –0.80 V_SHE the protecting properties of the film against electron transfer reactions are lost, and a behaviour similar to bare gold is observed. Ex situ XPS indicates that the thiol monolayer has not been desorbed to a large extent during oxygen reduction. Disorders of the monolayer structure and desorption of thiol molecules are proposed as the main reasons for the accessibility of electrochemical reactions to the surface.     

Scanning tunneling microscopy, Fourier transform infrared spectroscopy, and electrochemical characterization of 2-naphthalenethiol self-assembled monolayers on the Au surface: a study of bridge-mediated electron transfer in Ru(NH3)6(2+)/Ru(NH3)6(3+) redox reactions

We have studied the structure, adsorption kinetics, and barrier properties of self-assembled monolayers of 2-naphthalenethiol on Au using electrochemical techniques, grazing-angle Fourier transform infrared (FTIR) spectroscopy, and scanning tunneling microscopy (STM). The results of cyclic voltammetric and impedance measurements using redox probes show that 2-naphthalenethiol on Au forms a stable and reproducible, but moderately blocking, monolayer. Annealing of the self-assembled monolayer (SAM)-modified surface at 72 +/- 2 degrees C remarkably improves the blocking property of the monolayer of 2-naphthalenethiol on Au. From the study of kinetics of SAM formation, we find that the self-assembly follows Langmuir adsorption isotherm. Our STM and FTIR results show that the molecules are adsorbed with the naphthalene ring tilted from the surface normal by forming a square root 3 x 3 R30 degrees overlayer structure. From our studies, we conclude that the electron-transfer reaction of ferro/ferricyanide in the freshly formed monolayer occurs predominantly through the pinholes and defects present in the monolayer. However, in the case of thermally annealed specimen, although the ferro/ferricyanide reaction is almost completely blocked, the electron-transfer reaction of hexaammineruthenium(III) chloride is not significantly inhibited. It is proposed that the electron-transfer reaction in the case of the ruthenium redox couple takes place by a tunneling mechanism through the high-electron-density aromatic naphthalene ring acting as a bridge between the monolayer-modified electrode and the ruthenium complex.     

Comparative Behavior of Aromatic Disulfide and Diselenide Monolayers on Polycrystalline Gold Films Using Cyclic Voltammetry, STM, and Quartz Crystal Microbalance

A comparative investigation of the self-assembled monolayers of diphenyl disulfide (DDS), diphenyl diselenide (DDSe), and naphthalene disulfide (NDS) on polycrystalline gold films using STM, QCM, and electrochemical techniques is presented. The geometric constraint imposed by the rigid naphthalene ring for NDS inhibits the cleavage of the S-S bond, thus adversely affecting the monolayer organization and stability relative to the monolayers formed with DDS and DDSe. A comparative analysis using techniques like cyclic voltammetry and quartz-crystal microbalance indicates that, for DDS, the facile cleavage of the S-S bond leads to strong binding of the adsorbate molecules at the preferred surface sites, resulting in a rather well-organized self-assembled structure. The STM pattern of NDS reveals a periodic domain (i.e., less than 10 nm in size) while no such small domains are seen in the case of DDS and DDSe due to the orientational flexibility of the rings. Copyright 2001 Academic Press.     

Effect of gramicidin on phospholipid-modified monolayers and on ion transfer at a liquid-liquid interface.

The interaction of hybrid lipid/gramicidin A (gA) monolayers with dextran sulfate (DS) and the effect of this interaction on ion transfer at a liquid-liquid interface is reported. The interfacial and physicochemical properties are studied with Langmuir-Blodgett (LB) and electrochemical techniques. The results obtained from compression isotherms demonstrate that the interactions between the different species in the hybrid monolayer vary according to the chemical nature of the lipid (hydrocarbon region and charge of the head group). Interfacial capacitance measured with AC voltammetry indicates that the DS chains form a rather flat and compact layer when adsorbed to either zwitterionic or negatively charged phospholipid monolayers, and that calcium, even at low concentrations, interacts with the monolayers. These results are successfully described by a model based on the solution of the Poisson-Boltzmann equation in the interfacial region. Ion transfer and interactions with the lipid/gA/DS-modified monolayers were also studied with electrochemical techniques. Admittance data show that although the studied ions are not using gA channels for the transfer through the lipid membranes, the incorporation of gA in the lipid domain and the adsorption of DS at the interface have a significant effect on ion transfer across the monolayers. This effect can be explained as a consequence of the modified surface charge and of the compactness of the lipid domain due to its interaction with gA and to calcium and DS adsorption at the interface. The ion-transfer rate, therefore, depends on the composition of the monolayer and the chemical nature of the ion.     

Metal ion interaction with phosphorylated tyrosine analogue monolayers on gold

Phosphorylated tyrosine analogue molecules (pTyr-PT) were assembled onto gold substrates, and the resulting monolayers were used for metal ion interaction studies. The monolayers were characterized by X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), both prior to and after exposure to metal ions. XPS verified the elemental composition of the molecular adsorbate and the presence of metal ions coordinated to the phosphate groups. Both the angle-dependent XPS and IRAS results were consistent with the change in the structural orientation of the pTyr-PT monolayer upon exposure to metal ions. The differential capacitance of the monolayers upon coordination of the metal ions was evaluated using EIS. These metal ions were found to significantly change the capacitance of the pTyr-PT monolayers in contrast to the nonphosphorylated tyrosine analogue (TPT). CV results showed reduced electrochemical blocking capabilities of the phosphorylated analogue monolayer when exposed to metal ions, supporting the change in the structure of the monolayer observed by XPS and IRAS. The largest change in the structure and interfacial capacitance was observed for aluminum ions, compared to calcium, magnesium, and chromium ions. This type of monolayer shows an excellent capability to coordinate metal ions and has a high potential for use as sensing layers in biochip applications to monitor the presence of metal ions.     

Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.     

Electron transfer studies on cholesterol LB films assembled on thiophenol and 2-naphthalenethiol self-assembled monolayers

We have formed the cholesterol monolayer and multilayer LB films on the self-assembled monolayers of 2-naphthalenethiol (2-NT) and thiophenol (TP) and studied the electrochemical barrier properties of these composite films using cyclic voltammetry and electrochemical impedance spectroscopy. We have also characterized the cholesterol monolayer film using grazing angle FTIR, scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Cholesterol has a long hydrophobic steroid chain, which makes it a suitable candidate to assemble on the hydrophobic surfaces. We find that the highly hydrophobic surface formed by the self-assembled monolayers (SAM) of 2-NT and TP act as effective platforms for the fabrication of cholesterol monolayer and multilayer films. The STM studies show that the cholesterol monolayer films on 2-NT form striped patterns with a separation of 1.0 nm between them. The area per cholesterol molecule is observed to be 0.64 nm2 with a tilt angle of about 28.96 degrees from the surface normal. The electrochemical studies show a large increase in charge transfer resistance and lowering of interfacial capacitance due to the formation of the LB film of cholesterol. We have compared the behavior of this system with that of cholesterol monolayer and multilayers formed on the self-assembled monolayer of thiophenol.     

Biscarbamoyl diselenides as new carbamoylating reagents. Lewis acid promoted carbamoylation of aromatic compounds

The reaction of biscarbamoyl diselenides with aromatic compounds in the presence of Lewis acids resulted in Friedel-Crafts type carbamoylation (Gatterman amide synthesis) to give corresponding aromatic amides in good yields. This methodology was successfully applied to aroylation and benzylation by use of dibenzoyl diselenide and dibenzyl diselenide, respectively.     

Reduction of diphenyl diselenide and analogs by mammalian thioredoxin reductase is independent of their gluthathione peroxidase-like activity: a possible novel pathway for their antioxidant activity

Since the successful use of the organoselenium drug ebselen in clinical trials for the treatment of neuropathological conditions associated with oxidative stress, there have been concerted efforts geared towards understanding the precise mechanism of action of ebselen and other organoselenium compounds, especially the diorganyl diselenides such as diphenyl diselenide, and its analogs. Although the mechanism of action of ebselen and other organoselenium compounds has been shown to be related to their ability to generally mimic native glutathione peroxidase (GPx), only ebselen however has been shown to serve as a substrate for the mammalian thioredoxin reductase (TrxR), demonstrating another component of its pharmacological mechanisms. In fact, there is a dearth of information on the ability of other organoselenium compounds, especially diphenyl diselenide and its analogs, to serve as substrates for the mammalian enzyme thioredoxin reductase. Interestingly, diphenyl diselenide shares several antioxidant and neuroprotective properties with ebselen. Hence in the present study, we tested the hypothesis that diphenyl diselenide and some of its analogs (4,4'-bistrifluoromethyldiphenyl diselenide, 4,4'-bismethoxy-diphenyl diselenide, 4.4'-biscarboxydiphenyl diselenide, 4,4'-bischlorodiphenyl diselenide, 2,4,6,2',4',6'-hexamethyldiphenyl diselenide) could also be substrates for rat hepatic TrxR. Here we show for the first time that diselenides are good substrates for mammalian TrxR, but not necessarily good mimetics of GPx, and vice versa. For instance, bis-methoxydiphenyl diselenide had no GPx activity, whereas it was a good substrate for reduction by TrxR. Our experimental observations indicate a possible dissociation between the two pathways for peroxide degradation (either via substrate for TrxR or as a mimic of GPx). Consequently, the antioxidant activity of diphenyl diselenide and analogs can be attributed to their capacity to be substrates for mammalian TrxR and we therefore conclude that subtle changes in the aryl moiety of diselenides can be used as tool for dissociation of GPx or TrxR pathways as mechanism triggering their antioxidant activities.     

Construction of mixed mercaptopropionic acid/alkanethiol monolayers of controlled composition by structural control of a gold substrate with underpotentially deposited lead atoms.

Mixed monolayers of 3-mercaptopropionic acid (MPA) and alkanethiols of various chain lengths have been constructed on Au based on a novel concept, namely, control of the composition of the component thiols in mixed monolayers by controlling the surface structure of the substrate. The Au substrate surface was first modified with underpotentially deposited Pb (UPD Pb) atoms, followed by the formation of a self-assembled monolayer (SAM) of alkanethiol. The UPD Pb atoms were then oxidatively stripped from the surface to create vacant site, on which MPA was adsorbed to finally form the mixed monolayers. The surface coverages of Pb, alkanethiol and MPA, and the total numbers of thiols were determined using an electrochemical quartz crystal microbalance, X-ray photoelectron spectroscopy, and reductive desorption voltammetry. These results demonstrate that the surface coverage of MPA in the mixed monolayers is determined by the initial coverage of UPD Pb. Fourier transform infrared spectra also support this conclusion. The observed single peak in the cyclic voltammogram for the reductive desorption shows that MPA and alkanethiol do not form their single-component domains. Scanning tunneling microscopy revealed the single-row pinstripe structure for all the thiol adlayers formed during each step of the preparation. This shows that the surface structure of the mixed monolayers is determined by the structure of the initially formed SAM on Au partially covered with UPD Pb.     

Structural and topographical characteristics of adsorbed WPI and monoglyceride mixed monolayers at the air-water interface

In this work we have analyzed the structural and topographical characteristics of mixed monolayers formed by an adsorbed whey protein isolate (WPI) and a spread monoglyceride monolayer (monopalmitin or monoolein) on the previously adsorbed protein film. Measurements of the surface pressure (pi)-area (A) isotherm were obtained at 20 degrees C and at pH 7 for protein-adsorbed films from water in a Wilhelmy-type film balance. Since the surface concentration (1/A) is actually unknown for the adsorbed monolayer, the values were derived by assuming that the A values for adsorbed and spread monolayers were equal at the collapse point of the mixed film. The pi-A isotherm deduced for adsorbed WPI monolayer in this work is practically the same as that obtained directly by spreading. For WPI-monoglyceride mixed films, the pi-A isotherms for adsorbed and spread monolayers at pi higher than the equilibrium surface pressure of WPI are practically coincident, a phenomenon which may be attributed to the protein displacement by the monoglyceride from the interface. At lower surface pressures, WPI and monoglyceride coexist at the interface and the adsorbed and spread pi-A isotherms (i.e., the monolayer structure of the mixed films) are different. Monopalmitin has a higher capacity than monoolein for the displacement of protein from the air-water interface. However, some degree of interactions exists between proteins and monoglycerides and these interactions are higher for adsorbed than for spread films. The topography of the monolayer corroborates these conclusions.     

Comparison of Si-O-C interfacial bonding of alcohols and aldehydes on Si(111) formed from dilute solution with ultraviolet irradiation

Aliphatic alcohols and aldehydes were reacted with the Si(111)-H surface to form Si-O-C interfacial bonds from dilute solution by using ultraviolet light. The resulting monolayers were characterized by using transmission infrared spectroscopy, spectroscopic ellipsometry, and contact angle measurements. The effect of different solvents on monolayer quality is presented. The best monolayers were formed from CH(2)Cl(2). The optimized monolayers were thoroughly characterized to determine the film structure and monolayer stability. The UV-promoted, alcohol-functionalized, and aldehyde-functionalized monolayers are of comparable quality to those previously prepared by other means. Although both molecules are tethered through a Si-O-C bond, the film reactivity is distinctly different with the aldehyde films being more chemically resistant. The differences in chemical reactivity, vibrational spectra, hydrophobicity, and ellipsometric thickness between the alcohol and aldehyde monolayers are attributed to a difference in molecular coverage and monolayer formation.     

Dipolar control of monolayer morphology: spontaneous SAM patterning

A strategy for controlling relative placements of molecules within multicomponent monolayers at the solution-HOPG interface is demonstrated. The monolayers assemble from complementary pairs of 1,5-bis-alkyldiether-anthracenes bearing self-repelling side chains. Each diether side chain suffers repulsive dipolar interactions if it adsorbs next to an identical side chain in the morphology normally assumed by 1,5-bis-substituted-anthracene monolayers. Complementary side-chain pairs experience attractive dipolar interactions when adsorbed as neighbors in the normal morphology monolayer. The repulsive and attractive forces spontaneously drive formation of a patterned monolayer at the solution-HOPG interface. Each molecule adsorbs in its own row, sandwiched between two rows of the complementary anthracene. These studies demonstrate the viability of using weak dipolar interactions to control molecular placement and monolayer morphology and to pattern multicomponent monolayers.     

Alkane/Alcohol mixed monolayers at the solid/liquid interface

In this work, we present the behavior of solid monolayers of binary mixtures of alkanes and alcohols adsorbed on the surface of graphite from their liquid mixtures. We demonstrate that solid monolayers form for all the combinations investigated here. Differential scanning calorimetry (DSC) is used to identify the surface phase behavior of these mixtures, and elastic neutron incoherent scattering has been used to determine the composition of the mixed monolayers inferred by the calorimetry. The mixing behavior of the alcohol/alkane monolayer mixtures is compared quantitatively with alkane/alkane and alcohol/alcohol mixtures using a regular solution approach to model the incomplete mixing in the solid monolayer with preferential adsorption determining the surface composition. This analysis indicates the preferential adsorption of alcohols over alkanes of comparable alkyl chain length and even preferential adsorption of shorter alcohols over longer alkanes, which contrasts strongly with mixtures of alkane/alkane and alcohol/alcohol of different alkyl chain lengths where the longer homologue is always found to preferentially adsorb over the shorter. The alcohol/alkane mixtures are all found to phase separate to a significant extent in the adsorbed layer mixtures even when molecules are of a similar size. Again, this contrasts strongly with alkane/alkane and alcohol/alcohol mixtures where, although phase separation is found for molecules of significantly different size, good mixing is found for similar size species.     

Insertion of Elemental Sulfur into the Se-Se Bond of Diorganyl Diselenides. Synthesis of Bis-alkyl(seleno) Polysulfides

Reaction of dialkyl diselenides R₂Se₂ (R = Me, n-Bu) with sulfur at room temperature in the presence of the catalytic system DMSO-Na₂S·9H₂O-triethylbenzylammonium chloride, as well as at 55-60°C in the presence or in the absence of catalysts leads to the insertion of from one to six atoms of sulfur into the Se-Se bond. Bis(methylseleno) polysulfides MeSeS_nSeMe with n = 5-6 gradually liberate sulfur on keeping. Dibutyl diselenide is less active than dimethyl diselenide, and diphenyl diselenide does not react with sulfur in boiling carbon disulfide. At 55-60°C a small portion of selenium in dialkyl diselenides passes into unreacted sulfur which is indicative of cleavage of the C-Se bonds in bis(methylseleno) polysulfides.