A study of the adsorption of oxygen on Ni(111) using auger electron spectroscopy: Chemical shifts and valence spectra

Auger electron spectra have been recorded when oxygen is adsorbed on a Ni(111) single crystal surface. For the coverage range θ < 1, an analysis of the plot of the peak to peak height (H) of the oxygen KVV (516 eV) transition versus the total number of molecules cm^2? impinging on the surface (molecular beam dosing) shows agreement with the kinetic mechanism proposed by Morgan and King [Surface Sci. 23 (1970) 259] for the adsorption of oxygen on polycrystalline nickel films. In this coverage range, no energy shifts of the nickel or oxygen Auger peaks were recorded.At coverages θ > 1 (standard dosing procedure) shifts in the valence spectra M_{2, 3}VV (61 eV) and L₃M_{2, 3}V (782 eV) of ?2.3 eV and ?1.8eV respectively are recorded at 1.4 × 10^?2 torr-sec. Up to these coverages no shift of the L₃VV transition (849 eV) is observed. A chemical shift of ?2.1 eV is recorded in the L₃M_{2, 3}M_{2, 3} Auger transition (716 eV) at 1.4 × 10^?2 torr-sec.In the coverage range θ > 1, shifts in the energy of the oxygen Auger peaks are observed. At 5.8 × 10^?3 torr-sec. the KVV (516 eV) and KL₁V (495.2 ± 0.3 eV) transitions show shifts of ?1.5 eV and ?(1.0 ±0.3) eV respectively. No shift up to this coverage is recorded in the KL₁L₁ (480.6 ± 0.3 eV) transition.     

Angular distributions of auger electron emission: Clean and gas-adsorbed polycrystalline Ni surfaces

The excitation angle (β) and emission angle (θ) dependences of the Ni M₂,₃VV (61 eV) and Ni L₃VV (850 eV) Auger emissions from clean polycrystalline Ni surfaces, and the S L₂, ₃ M₂, ₃M₂, ₃ (150 eV) Auger emission from S-adsorbed poly-Ni surfaces have been investigated. In the case of Ni (61 eV) and S Auger emissions, the β-dependence shows the $\text{1}\text{cos β}$ distribution, while a significant deviation from $\text{1}\text{cos β}$ is observed for Ni (850 eV) Auger emission. The cosθ distribution and the intermediate between isotropic and cosθ distributions are observed for Ni (61 eV), and for Ni (850 eV) and S Auger emissions, respectively. Those results have been found to be in fairly good agreement with the calculations based on the simple continuum model without consideration of the diffraction effect and the inherent anisotropic emission.     

Growth and properties of oxide films on Zn(0001)

The initial stages of the formation of ZnO films on cleavage planes of Zn single crystals have been studied. The growth rate is found to be linear in pressure and independent of temperature over the range from 77 to 425 K. The growth law is consistent with the rate limiting step being the adsorption of oxygen rather than ion transport through the oxide layer. Both the atomic and electronic structure have been monitored during oxygen exposure. The LEED patterns and intensity-voltage data indicate that at low temperatures the oxide is either amrophous or a fine grained polycrystal while above room temperature it is single crystal ZnO epitaxially oriented on Zn(0001). The changes during oxygen exposure of the Zn M₂₃M₄₅M₄₅, M₂₃M₄₅V, M₂₃VV and corresponding M₁ Auger spectra have been studied in some detail. The details of the spectra are identified through comparison with calculated and measured band structures and with previous observations of LMM transitions. The relaxation energy associated with the two d-band holes in the final state (i.e., δE(M₄₅M₄₅)] is found to be ～9 eV in good agreement with a recent calculation. The corresponding relaxation energy for the oxide is ～13.5 eV. The development of the electron energy loss spectra with oxygen exposure has been followed for a range of primary energies. A growth model which is consistent with the LEED observations, Auger peak heights and lineshapes and energy loss spectra is that the oxide grows heterogeneously on the Zn surface with no distinguishable precursor adsorbed state. However, contrary to previous models, it is shown that the surface is completely covered by oxide at a mean thickness of 2–3 monolayers. LEED, Auger and energy loss data for the two polar cleavage faces of ZnO are presented for comparison with those from the oxide overlayer.     

Line shape analysis and relaxation energies in the MVV Auger spectra of zinc and zinc oxide

The oxidation of polycrystalline zinc has been studied by recording the evolution of the line shape of the corresponding Auger spectra. The fine structure of the surface-sensitive low energy M₁ VV and M₂₃VV (V = 4s ? 3d valence band) lines in pure zinc has been analyzed and a new feature involving the 4s band tentatively identified. In the course of oxidation the main peaks broaden and shift to lower energies. This behaviour is explained in terms of increase of the 3d band width and decrease in the extraatomic relaxation energies. The extraatomic relaxation is found to decrease in the oxide by ~3.8 eV. A derivation of Auger intra and Extraatomic energies involving basically experimental data is presented. These values are compared to theoretical evaluations and their connection with photoemission dynamical relaxation data is discussed.     

M4,5N4,5N4,5 auger electron spectrum of Ba metal

The Al Kα excited M_4,5N_4,5N_4,5 Auger spectrum of Ba has been measured from the metallic sample evaporated on a Ag substrate. The spectrum has been decomposed into individual line components after the background subtraction. The decomposed spectrum has been compared with the theoretical spectrum calculated for the 4d^?2 final state configuration in the mixed coupling scheme applying jj-coupling for the initial state and intermediate coupling for the final state. The most prominent structure of the spectrum shows the two 4d-hole coupling, but the structure which is caused by the Auger transitions M_,45N_2,3V has also been observed. The screening of the core holes in Ba metal seems to be produced by (5d6s) electrons. The simple excited atom model HF-calculations give an Auger kinetic energy shift (metal-free atom) of 16.7 eV, which is comparable to the experimental value 14–18 eV.     

Some aspects of auger electron spectra of 3d transition metal oxides

Auger electron spectra of the transition metals Cr, Mn, Fe, Co and Ni as well as their oxides have been investigated in the energy range between 0–100 eV. In each case of the clean metal surface the observed spectrum consists essentially of one Auger line identified asM _2,3 VV transition. After oxidation a line doublet is observed revealing two transitions instead of one. Additional new Auger peaks appear in the low energy range between 0–30 eV. The “splitting” of the Auger line can be explained as resulting from aM _2,3 V _dV_d and aM _2,3 V _pV_p transition. The latter is characteristic for the compound and can in a simple way be interpreted as a cross transition.     

Low energy electron spectroscopy of Pt (100) and Pt (100)/CO

Fine structure in the n_vi, _VIIVV spectrum of clean Pt (100) has been observed, and interpreted as “band like” in origin rather than quasi-atomic. Differences in the dependence of the Auger yield on primary beam energy are observed between the N_VI, _VIIVV and O_IIIVV peaks, and are associated with anomalies in the dependence of the inner shell ionization crossection of the 4f level. Low energy electron loss spectra on the clean surface have been investigated at primary energies in the range 71–774 eV and at angles of incidence of the beam 0–60°. The results are related to high energy loss and optical data, and assignments are given for inter-band and plasmon losses. With approximately $\text{3}\text{4}$ of a monolayer of CO on the surface there is a prominent additional loss at around 13.5 eV, which is interpreted as a one electron transition from a σ state below the d band to available states several electron volts above the Fermi level.     

Changes in Auger spectra of Mg and Fe due to oxidation

Auger electron spectra of clean Mg and Fe surfaces have been investigated under UHV conditions. The main Auger peaks in the low energy Auger spectra of these elements are identified as due to L_2,3VV and M_2,3VV transitions for Mg and Fe respectively. Changes in the low energy spectra of these clean surfaces of Mg and Fe due to chemisorption of residual oxygen in the UHV system, were also studied. The results indicate that for each oxidised surface new larger Auger peaks appear at energies lower than the original main peaks in the clean spectra. The changes in the spectra are believed to be due to the energy shifts of inner energy levels and valence bands involved in the Auger transitions as an oxide is formed.     

The initial oxidation of Cu(100) single crystal surfaces: an electron spectroscopic investigation

The total energy distribution of electrons emitted from clean Cu(100) and oxygen covered surfaces is analysed. A primary electron energy of 400 eV enabled the investigation of characteristic losses (ELS), Cu MVV Auger transitions and true secondary electrons in a single spectroscopic run. Oxygen exposure up to 10⁸ L at elevated temperature (~400 K) results in a Cu density of states (DOS) strongly affected by O(2p) electrons. The Auger lines of Cu, atomic-like for clean surfaces, reveal DOS effects after some 10⁷ L oxygen exposure: all MVV transitions shift down by ~2 eV in spite of a fixed M₂₃ level; the M₂₃VV Auger line splitting is vanishing due to a broadened valence band maximum allowing the deexcitation of the final two-hole state of intraatomic transitions. Heating the oxygen covered crystal to 820 K is accompanied by the removal of much surface oxygen and an electronic state resembling an earlier oxidation state without DOS effects in the Cu Auger spectrum.     

The electronic structure of the [CuO5]8− unit: A photoemission study of Y2BaCuO5

A photoemission study of the green phase Y₂BaCuO₅, including core level spectra of the elements, CuL ₃VV Auger, and XPS and UPS valence band spectra has been performed. The crystal structure of Y₂BaCuO₅ contains discrete [CuO₅]^8– units with divalent copper. The surface status of the Y₂BaCuO₅ samples is discussed with respect to the problems encountered in photoemission studies of the YBaCuO superconductors. The photoemission data are analysed within a simple cluster configuration interaction model by considering in addition previously reported optical spectra. Y₂BaCuO₅ is a charge transfer insulator with the charge transfer energy 0.5 eV being much smaller than thed–d Coulomb interaction energyU6eV. Cluster model parameters and valence band shapes of Y₂BaCuO₅ are compared with those of Nd₂CuO₄ the structure of which contains divalent copper within an extended copper-oxygen network. More detailed cluster and impurity models for cuprates described in literature are discussed in view of the present results.     

Solid state effects in the Auger spectrum of zinc and oxidised zinc

Measurements of the zinc L_2,3M_4,5M_4,5 Auger spectra are reported. The line shapes in solid zinc are similar to those in zinc vapour but the Auger energies have increased by about 15 eV and the line breadths have broadened from 0.5 eV to 1.0 eV fwhm. The ratio of the L₂:L₃ groups differ from the vapour suggesting that L₂L₃M_4,5 Coster-Kronig transitions occur in the solid but not in the vapour. Changes in the spectra with oxidation have been observed. The Auger lines broaden on oxidation and a line breadth of 3.2 eV fwhm gives the best fit to the spectrum of almost fully oxidised zinc. The oxide L₃M_4,5M_4,5¹G₄ peak progressively shifts from 2.6 eV to 4.2 eV below the metal peak as the oxide thickness increases, the latter value being close to the measured shift in crystalline zinc oxide. Similar energy variation is reported for solid Argon condensed onto clean silver and the shifts are explained in terms of variation in “extra electron relaxation” with film thickness.     

On the mechanism of the induced anisotropy of magnesium ferrites in the range of higher temperatures

A simple mechanism explaining not only the magnitude but also the type of induced anisotropy on the magnesium ferrite Mg_0·78 Fe_2·22 O_4·026 in the temperature range from 400 to 500°K has been designed. The experimentally estimated values of the microscopic bond energyl _p 7×10^–16 erg of the configuration contributing to theF-type anisotropy and the activation energy _exp = 1·1 eV are in good correspondence with the valuesl _d1·6×10^–16erg and _cal = 1·1₅ eV which have been calculated theoretically.Dedicated to Professor Dr. Jaromír Bro on his sixtieth birthday.The author would like to express his thanks to Dr. S. Krupika for valuable discussions and his interest in this paper.     

Study of L2,3M4,5M4,5 Auger spectra of Zn and Cu in molecular ZnCl2 and (CuCl)3 vapours

L_2,3M_4,5M_4,5 Auger electron spectra of Zn and Cu have been measured in molecular ZnCl₂ and (CuCl) ₃ vapours. The spectra have been analyzed and compared with the corresponding free-atom spectra. It is found that the main features of the spectra are atomic-like. The energies are shifted by 0.55 eV in ZnCl₂ and by 3.2 eV in (CuCl)₃ towards higher kinetic energy compared with the corresponding free-atom spectra. For the intensity ratios between the L₃ and L₂ groups, the values 2.8 and 3.7 are obtained for Zn and Cu, respectively. These intensity ratio, together with energy considerations based on free-atom Dirac—Fock calculations and observed Auger shifts, indicate that the L₂L₃M_4,5 Coster—Kronig process is energetically possible in (CuCl)₃ molecular clusters but not in ZnCl₂. The satellite structure in the spectra studied also supports this conclusion.     

Surface electronic structure of α-Mo2C(0 0 0 1)

The electronic structure of α-Mo₂C(0 0 0 1) has been investigated by angle-resolved photoemission spectroscopy utilizing synchrotron radiation. A sharp peak is observed at 3.3 eV in normal-emission spectra. Since the peak shows no dispersion as a function of photon energy and is sensitively attenuated by oxygen adsorption, the initial state of the peak is attributed to a surface state. Resonant photoemission study shows that the state includes substantial contribution of 4d orbitals of the Mo atoms in the second layer. The emissions with constant kinetic energies of 22 and 31 eV above the Fermi level (E_F) are found in normal-emission spectra, and these emissions are interpreted as originating from the Mo N₁N₂₃V and N₂₃VV Auger transitions, respectively.     

Investigations of the excitation energy transport mechanism in donor-acceptor systems

Measurements of fluorescence quantum yield _D/_oD of Na-fluorescein (donor; D) versus concentration of rhodamine B (acceptor; A) in viscous solutions have been carried out. The donor concentration in these solutions was as follows:C _D=2·10^–2 M (system I), 1.5·10^–2 M (II), 10^–2 M (III), 3·10^–3 M (IV), and 5·10^–5 M (V). The experimental results have been compared with current theories of nonradiative electronic energy transfer (NEET). In the case of very strong migration (systems I, II, and III), a significant influence of correlations (between configurations of D and A molecules in the surroundings of successively excited donors) on quantum yield _D/_oD has been determined. Experimental values have been found to be clearly higher in comparison with those predicted theoretically. The influence of possible factors on the decrease in the effectiveness of excitation energy transport to traps-acceptors in systems of very strong migration has been discussed.Dedicated to Professor A. Kawski on the occasion of his 65th birthday.     

The electronic structure of ordered Cu3Au(001)

The electronic structure of the (001) face of ordered Cu₃Au was studied using synchrotron radiation at BESSY, in the photon energy range 22–80 eV. The Cu 3d-derived bands in Cu₃Au look like the foldedd-bands of fcc Cu metal. Three Au 5d-derived bands were observed at 5.0, 6.1 and 7.0 eV below the Fermi level, which showed no dispersion with change in photon energy. The Cu 3d- and the Au 5d-derived bands are found to be separated in energy. We have calculated self-consistent energy bands along the (001) direction using the fully relativistic LMTO method. Comparison of these bands with those experimentally determined shows good agreement. From the calculated bands along –X the direction dependent densities of states were determined, which give a consistent account for the non-dispersive Au-bands.     

Fermion masses

In this paper, we show that 2m _e m /(m _e ² +m ² = (g _V/g _A) _e ² . From this expression, the Weinberg mixing parameter is shown to be 0·2254 or 0·2746. Assuming that the electron and muon neutrino masses are degenerate, we find thatm _v = (g _V/g _A) _e ² . (m _e m )/M _WL, where M_WL is the mass of the standard W^± boson. The neutrino mass turns out to be 6·5 eV. The -neutrino mass is found to be about 81 MeV. The masses of c, t, s and b quarks are found to be respectively 1·7 GeV, 21·2 GeV, 0·57 GeV and 2·18 GeV by assumingm _d=m _u= 0·3 GeV. All these masses agree with other estimates except the b quark which has about half of its expected value.     

Oxidation and thermal reduction of the Cu(1 0 0) surface as studied using positron annihilation induced Auger electron spectroscopy (PAES)

Changes in the surface of an oxidized Cu(1 0 0) single crystal resulting from vacuum annealing have been investigated using positron annihilation induced Auger electron spectroscopy (PAES). PAES measurements show a large increase in the intensity of the annihilation induced Cu M_2,3VV Auger peak as the sample is subjected to a series of isochronal anneals in vacuum up to annealing temperature 300 °C. The intensity then decreases monotonically as the annealing temperature is increased to ∼600 °C. Experimental probabilities of annihilation of surface-trapped positrons with Cu 3p and O 1s core-level electrons are estimated from the measured intensities of the positron annihilation induced Cu M_2,3VV and O KLL Auger transitions. Experimental PAES results are analyzed by performing calculations of positron surface states and annihilation probabilities of surface-trapped positrons with relevant core electrons taking into account the charge redistribution at the surface, surface reconstructions, and electron-positron correlations effects. The effects of oxygen adsorption on localization of positron surface state wave function and annihilation characteristics are also analyzed. Possible explanation is proposed for the observed behavior of the intensity of positron annihilation induced Cu M_2,3VV and O KLL Auger peaks and probabilities of annihilation of surface-trapped positrons with Cu 3p and O 1s core-level electrons with changes of the annealing temperature.     

Topmost-surface-sensitive Si-2p photoelectron spectra of clean Si(1 0 0)-2 × 1 measured with photoelectron Auger coincidence spectroscopy

Topmost-surface-sensitive Si-2p photoelectron spectra of a clean Si(1 0 0)-2 × 1 surface have been measured using Si-2p photoelectron Si-L₂₃VV Auger coincidence spectroscopy (Si-2p–Si-L₂₃VV PEACS). The escape depth of the PEACS electrons is estimated to be ～1.2 Å. The results support the assignments of the Si up-atoms, the Si down-atoms, the Si 2nd-layer, and the Si bulk proposed in previous researches. The Si-2p component with a binding energy of ?0.23 eV relative to the bulk Si-2p_3/2 peak, is shown to originate mainly from the topmost surface. Site selectivity of PEACS is indicated to be achieved to some degree by carefully selecting the kinetic energy of the Auger electrons. Since PEACS can be applied to any surface, the present study opens a new approach to identify PES components.