The First Bifluoride Sensor Based on Fluorescent Enhancement

The first fluorescent sensor for HF₂ ^? anion, N¹, N³-di(naphthalene-1-yl)isophthalamide (L) has been derived from α-Napthylamine and isopthaloyl chloride. In 1:1 (v/v) DMSO:H₂O, L exhibits high selectivity towards HF₂ ^? anion with a 4-fold enhancement in fluorescent intensity. Very little enhancement in fluorescence intensity is observed for F^?, Cl^?, Br^?, I^?, SCN^?, PO₄ ^3?, SO₄ ^2?, and CH₃COO^? anions. The stoichiometry interaction between L and HF₂ ^? is found to be 1:1 from fluorescence and UV/Visible spectral data. DFT calculation shows that binding between HF₂ ^? and L is 1:1 and increases the relative planarity between the two naphthyl rings causing fluorescence enhancement. A shift of 0.080 V in oxidation potential of L is observed on interaction with HF₂ ^? by cyclic voltammetry and square wave voltammetry.     

Urea Based Dipodal Fluorescence Receptor for Sensing of Fe3+ Ion in Semi-Aqueous Medium

Urea based fluorescent chemosensor 1 was synthesized. Receptor 1 shows unique selectivity for the Fe³⁺ion and no such significant response was noticed with other metal ions (Cr³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Bi³⁺) in DMSO/H₂O (50:50,v/v) semi-aqueous solution. The binding features have been established by absorption and fluorescence spectroscopic methods. The binding constant (K) values obtained from Benesi-Hildebrand, Scatchard and Connor plot for receptor 1 is (8.3?±?0.3) × 10³ M^?1 and has good detection limit 0.7?μM. The stoichiometry of 1.Fe³⁺ complex was confirmed by mass spectroscopy and Job’s plot.

N-benzoate-N′ salicylaldehyde ethynelediamine: A new fluorescent sensor for Zn2+ ion by “off-on” mode

Imbalance of zinc ion (Zn²⁺) in human body causes diseases like Alzheimer’s and Parkinson’s and therefore Zn²⁺ estimation in biological fluids has diagnostic values. Fluorescence “off-on” sensors have advantages of high sensitivity and in situ application over other sensors. A new fluorescent “off-on” Zn²⁺ sensor, N-benzoate-N′ salicylaldehyde ethynelediamine (L), has been synthesisied. In 1:1(v/v) CH₃OH:PBS (PBS?=?phosphate buffer solution), L shows ca. 20 times enhancement in fluorescence intensity on interaction with Zn²⁺, due to snapping of photoinduced electron transfer (PET) process, which is selective over metal ions - Na⁺, K⁺, Ca²⁺, Ni²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺. These metal ions either individually or all together does not interfere the sensing ability of L towards Zn²⁺. A 1:1 interaction between L and Zn²⁺ ion with binding constant 10^4.25 has been established from spectroscopic data.     

A New On-fluorescent Probe for Manganese (II) Ion

A new fluorescent probe for Mn²⁺ ion, (6E)-N-((E)-1,2-diphenyl-2-(pyridin-2-ylimino)ethylidene)pyridin-2-amine (L), has been synthesized from benzil and 2-amino pyridine and characterized. In 1:1 (v/v) CH₃CN:H₂O (pH 4.0, universal buffer) L exhibits fluorescent intensity with emission peak at λ_max 360 nm on excitation with photons of 310 nm. Fluorescent intensity of L increases distinguishingly on interaction with Mn²⁺ ion compared to metal ions—Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Ag⁺ individually or all together. The enhancement in fluorescent intensity is due to snapping of photoinduced electron transfer (PET) prevailed in free L. Fluorescence and UV/visible spectral data analysis shows that binding stoichiometry between Mn²⁺ and L is 1:1 with log β?≈?3.0. Both L and its Mn²⁺ complex were optimised using density functional theory (DFT) and vibrational frequency calculations confirm that both are at local minima on the potential energy surfaces.     

Bis-Benzimidazolyl Diamide Based Fluorescent Probe for Copper(II): Synthesis, Structural and Fluorescence Studies

A new fluorescent probe based on a bis-benzimidazole diamide N ²,N ^2′-bis[(1-ethyl-benzimidazol-2-yl)methyl]biphenyl-2,2′-dicarboxamide ligand L ₁ with a biphenyl spacer group and a Copper(II) trinuclear metallacycle has been synthesized and characterized by X-ray single crystallography, elemental and spectral (FT-IR, ¹H & ¹³C NMR, UV-Visible) analysis. The fluorescence spectra of L ₁ in MeOH show an emission band centered at 300 nm. This band arises due to benzimidazolyl moiety in the ligating system. The diamide L ₁ in the presence of Cu²⁺ show the simultaneous ‘quenching’ of (300 nm) and ‘enhancement’ of (375 nm) emission band. Similar fluorescence behavior was found in water–methanol mixture (9:1). The new emission band at 375 nm is attributed to intra ligand π–π* transition of the biphenyl moiety. L ₁ exhibited high selectivity and sensitivity towards Cu²⁺ in both the medium over other common metal ions like Ni²⁺, Co²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Pb²⁺ and Hg²⁺. The binding constant with Cu²⁺ was calculated by the Benesi-Hildebrand equation. Selective “off-on-off” behavior of L ₁ in methanol has also been studied. The fluorescent intensity of 375 nm bands in L ₁ enhances (turns-on) upon addition of Cu²⁺ and quenches (turn-off) upon addition of Na₂-EDTA.     

A Novel Series Colorimetric and Off–On Fluorescent Chemosensors for Fe3+ Based on Rhodamine B Derivative

A novel series colorimetric and off–on fluorescent chemosensors (2a, 2b, 2c) were designed and synthesized, which showed reversible and highly selective and sensitive recognition toward Fe³⁺ over other examined metal ions. Upon addition of Fe³⁺, sensors (2a, 2b) exhibit remarkably and 2c exhibits moderate enhanced absorbance intensity and color change from colorless to pink in CH₃OH–H₂O(1:1, v/v). The three compounds (2a, 2b, 2c) may therefore be applicable as rhodamine-based turn-on type fluorescent chemosensors.     

9, 10-Bis(8-Quinolinoxymethyl)Anthracene—A Fluorescent Sensor for Nanomolar Detection of Cu2+ with Unusual Acid Stability of Cu2+-Complex

In this work, the dipod 9,10-bis(8-quinolinoxymethyl)anthracene (1) and for comparison, monopod 9-(8-quinolinoxymethyl)anthracene (2) have been synthesized. The fluoroionophore 1 in pH 7.1 HEPES buffered CH₃CN:H₂O (4:1 v/v) solution shows quenching only with Cu²⁺ with lowest limit of detection 150 nM, amongst various metal ions. Fluoroionophore 1 could also be applied to sense Co²⁺ with lowest limit of detection 600 nM. By modulating the pH of the solution and concentration of Cu²⁺, 1 shows respective “On-Off-On” and “On-Off” fluorescent switching. The self-assembly of two Cu²⁺ ions and two molecules of fluoroionophore 1 to form closed structure [Cu₂(L)₂]⁴⁺ seems to be responsible for nanomolar sensitivity towards Cu²⁺. The combination of delayed second protonation of 1 (pK_a2?=?2.6) and stepwise protonation of [Cu₂ L ₂]⁴⁺ causes unusual stability of [Cu(LH)₂]⁴⁺ even at pH?<?2.

A New Piperidine Derivatized-Schiff Base Based “Turn-on” Cu<Superscript>2+</Superscript>Chemo-Sensor

In this study, we report the synthesis of new Schiff base E-1-(((1-benzylpiperidin-4-yl)imino)methyl)naphthalenee-2-ol (L) and evaluation of its fluorescence response toward Cu²⁺ ion. Preliminary, solvent effect, metal selectivity and metal ligand ratio were analyzed through UV-Visible study. Fluorescence response toward Cu²⁺ was carried to assess the fluorescent property of synthesized Schiff base. The probe exhibited a higher fluorescence enhancement in the presence of Cu²⁺ over other metal ions (Ni²⁺, Zn²⁺, Hg²⁺, Co²⁺, Cd²⁺, Al³⁺, Fe²⁺, and Pb²⁺). The binding stoichiometry between L and Cu²⁺ has been investigated using Job’s plot and Benesi-Hildebrand equation and it was found that ligand L can form 1:1 L-Cu²⁺ complex with binding constant (K _a) of 4?×?10⁴ LM^?1.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Aluminum Ions Based on Schiff Base

An efficient “off–on” type fluorescent chemosensor, (E)-N′-(4-(diethylamino)-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H ₂ L), based on Schiff base for the determination of Al³⁺ has been designed, synthesized, and evaluated. Upon treated with Al³⁺, the fluorescence of H ₂ L was enhanced 45-fold due to the chelation-enhanced fluorescence (CHEF) effect based on the formation of a 1:1 complex between the chemosensor and Al³⁺. Other metal ions, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Ga³⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ag⁺, Fe³⁺, In³⁺, Mn²⁺, Pb²⁺, Co²⁺, and Ni²⁺ had little effect on the fluorescence. The results demonstrate that the chemosensor H ₂ L has stronger affinity with Al³⁺ than other metal ions. The detection limit of H ₂ L for sensing Al³⁺ is 3.60 × 10^?6 M in EtOH–H₂O (3:7, v/v) solution. And the recognizing behavior has been investigated both experimentally and computationally.     

Design and Synthesis of a Pyridine Based Chemosensor: Highly Selective Fluorescent Probe For Pb2+

A pyridine based imine-linked chemosensor has been synthesized and evaluated its binding affinity with library of transition metal ions. It has prominent selectivity towards Pb²⁺ among other metal ions in DMF/H₂O (9:1, v/v) solvent system. The 1:1 stoichiometric was confirmed by job’s plot and has a binding constant (K_a)?=?5.142?×?10³ M^?1 on fluorescence. A B3LYP/6-31G and B3LYP/LanL2DZ basis sets were employed for optimization of 3 and 3.Pb²⁺.     

A Pyrene-based Highly Selective Turn-on Fluorescent Chemosensor for Iron(III) Ions and its Application in Living Cell Imaging

A new pyrene-based chemosensor (1) exhibits excellent selectivity for Fe³⁺ ions over a wide range of tested metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Hg²⁺, K⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺. The binding of Fe³⁺ to chemosensor 1 produces an emission band at 507 nm due to the formation of a Py-Py* excimer that is induced by Fe³⁺-binding. The binding ratio of 1-Fe³⁺ was determined to be 1:1 from a Job plot. The association constant of 1-Fe³⁺ complexes was found to be 1.27?×?10⁴ M^?1 from a Benesi-Hildebrand plot. In addition, fluorescence microscopy experiments show that 1 can be used as a fluorescent probe for detecting Fe³⁺ in living cells.     

A Sensitive Schiff-Base Fluorescent Chemosensor for the Selective Detection of Zn2+

A Schiff-base fluorescent probe – N, N^/-bis(salicylidene) trans 1, 2 – diaminocyclohexane (H ₂ L) was synthesized and evaluated as a chemoselective Zn²⁺ sensor. Upon treatment with Zn²⁺, the complexation of H ₂ L with Zn²⁺ resulted in a bathochromic shift with a pronounced enhancement in the fluorescence intensity in ethanol solution. Moreover, other common alkali, alkaline earth and transition metal ions failed to induce response or minimal spectral changes. Notably, this chemosensor could distinguish clearly Zn²⁺ from Cd²⁺. The stoichiometric ratio and association constant were evaluated using Benesi – Hildebrand relation giving 1:1 stoichiometry. This further corroborated 1:1 complex formation based on Job’s plot analyses.     

A Novel Colorimetric and Fluorescent “Off-On” Chemosensor for Cu2+ Based on a Rhodamine Derivative Bearing Naphthyridine Group

A new rhodamine-based derivative bearing a naphthyridine group (compound 1) was synthesized as a colorimetric and fluorescent “off-on” chemosensor for Cu²⁺ in aqueous solutions. The sensing behaviors of 1 toward various metal ions in neutral aqueous solutions were investigated by absorption and fluorescence spectroscopies. Compound 1 is found to exhibit a significant increase in absorbance at 561 nm and an amplified fluorescence at 590 nm toward Cu²⁺ in a selective, sensitive and rapid manner. The quantification of Cu²⁺ by 1 using an absorption spectroscopy method was satisfactory in the linear working range 0.9–10 μM, with a detection limit of 5.4?×?10^?8?M for Cu²⁺ and good tolerance of other metal ions. Upon addition of Cu²⁺, the spirolactam ring (colorless and nonfluorescent) of 1 was opened to ring-opened amide (red color and fluorescent) and a 1:1 stoichiochemetry for the 1-Cu²⁺ complex was formed with an association constant of 1.57?×?10⁴?M^?1.     

Spectroscopic,Computational, Antimicrobial,DNA Interaction,In Vitro Anticancer and Molecular Docking Properties of Biochemically Active Cu(II) and Zn(II) Complexes of Pyrimidine-Ligand

Biochemically active Cu(II) and Zn(II) complexes [CuL(ClO₄)₂(1) and ZnL(ClO₄)₂(2)] have been synthesized from N,N donor Schiff base ligand L derived from4,6-dichloropyrimdine-5-carboxaldehyde with 4-(2-aminoethyl)morpholine. The L, complexes 1 and 2 have been structurally characterized by elemental analysis, ¹H-NMR, FTIR, MS, UV-Visible and ESR techniques. The results obtained from the spectral studies supports the complexes 1 and 2 are coordinated with L through square planar geometry. DFT calculations results supports, the ligand to metal charge transfer mechanism can occur between L and metal(II) ions. The antimicrobial efficacy results have been recommended that, complexes 1 and 2 are good anti-pathogenic agents than ligand L. The interaction of complexes 1 and 2 with calf thymus (CT) DNA has been studied by electronic absorption, viscometric, fluorometric and cyclic voltammetric measurements. The calculated K_b values for L, complexes 1 and 2 found from absorption titrations was 4.45?×?10⁴, L; 1.92?×?10⁵, 1 and 1.65?×?10⁵, 2. The Ksv values were found to be 3.0?×?10³, 3.68?×?10³and 3.52?×?10³ for L, complexes 1 and 2 by using competitive binding with ethidium bromide (EB). These results suggest that, the compounds are interacted with DNA may be electrostatic binding. The molecular docking studies have been carried out to confirm the interaction of compounds with DNA. Consequently, in vitro anticancer activities of L, complexes 1 and 2 against selected cancer (lung cancer A549, liver cancer HepG2 and cervical carcinoma HeLa) and normal (NHDF) cell lines were assessed by MTT assay.     

Bis(2-Hydroxy-3-Isopropyl-6-Methyl-Benzaldehyde)Ethylenediamine: A Novel Cation Sensor

Novel substituted phenol-based new symmetrical bis(2-hydroxy-3-isopropyl-6-methyl-benzaldehyde)ethylenediamine (1) has been designed and synthesized. The compound 1 fluorometrically recognized Cu²⁺ ion in CH₃OH/H₂O (90:10, v/v) by exhibiting an increase in emission upon complexation. In addition, Cu²⁺ gave rise to a change in colour of the solution of compound 1, which was clearly visible to the naked eye under UV irradiation. The association constant (K) of compound 1 with Cu²⁺ ion was computed with the Benesi-Hildebrand plot and Scatchard plot at 43,000 M^?1 and 43,011 M^?1 respectively.     

A Novel Ratiometric Fluorescent Mercury Probe Based on Deprotonation-ICT Mechanism

A new NBD-rhodamine dye (1) was developed as a colorimetric and ratiometric fluorescent chemosensor for Hg²⁺ with good selectivity in aqueous ethanol solutions under neutral to basic conditions. Sensor 1 showed absorption at 468 nm and a weak emission at 529 nm (? _F ?=?0.063) in ethanol/aqueous tris buffer (9:1, v/v) of pH 9.17 solution. Bathochromic shifts in both absorption (492 nm) and fluorescence spectra (569 nm, ? _F ?=?0.129), respectively upon addition of 2 equiv. of Hg²⁺ were observed. The ring-opening reaction of the spirolactam form to the corresponding xanthene form was not found. The interaction of Hg²⁺ with chemosensor 1 resulted in the deprotonation of the secondary amine conjugated to the NBD component so that the electron-donating ability of the N atom was enhanced. Deprotonation-ICT mechanism of secondary amines was suggested for the ratiometric fluorescent chemosensing for Hg²⁺.     

New Application of a Known Molecule: Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff Base as a Colorimetric and Fluorescent “Off-On” Probe for Copper (II)

Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff base (1) has been investigated as a colorimetric and fluorescent “off-on” probe for the recognition of Cu²⁺ in aqueous solution. Probe 1 was synthesized by condensation of rhodamine B hydrazide and 8-hydroxy-2-quinolinecarboxaldehyde, which exhibited good selectivity for Cu²⁺ among a range of biologically and environmentally important metal ions. The Cu²⁺ recognition event undergoes a Cu²⁺ promoted hydrolysis of probe 1 to release rhodamine B and the recognition process is barely interfered by other coexisting metal ions.

A Schiff-Based Colorimetric Fluorescent Sensor with the Potential for Detection of Fluoride Ions

A simple Schiff-based colorimetric fluorescent receptor 1 was prepared. It exhibits a “turn-on-type” mode with high sensitivity in the presence of F^?. The change in color is very easily observed by the naked eye in the presence of F^?, whereas other anions do not induce such a change. Job plot indicated a 1:2 complexation stoichiometry between receptor 1 and F^?. The association constant for 1-F^? in CH₃CN was determined as 1.32*10⁵ M^?2 by a Hill plot.

An asymmetric imidazole derivative as potential fluorescent chemosensor for Fe in aqueous solution

A novel conjugated molecule, L, based on 2,4,5-triphenylimidazole and 6-phenyl-2,2′-bipyridine (HC^∧N^∧N) was synthesized in two steps. The molecule can recognize Fe³⁺ in aqueous solution (THF/H₂O, 1/1, v/v) by the appearance of new emission bands at 416 and 442 nm, which can be attributed to the emission of the newly formed L-Fe³⁺ complex. The binding constant of the complex was calculated to be (6.6±0.39)×10³ M⁻¹, and its formation was also confirmed by the appearance of isosbestic points at 312 and 381 nm in the UV-visible spectral titration experiment. While other transition and rare-earth metal ions, such as Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Eu³⁺ and Nd³⁺, can only cause some decrease of L's fluorescence, alkali and alkaline earth metal ions, such as Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺, almost have no effect on L's fluorescence. The fluorescence of L can be recovered by the addition of EDTA to the L-Fe³⁺ system just due to EDTA's stronger chelating ability than that of L.     

Indole-based Fluorescent Sensors for Selective Detection of Hg2+

A series of indole-based fluorescent chemosensors 1–4 were prepared and investigated characteristick features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion among a series of metal ions in H₂O–DMSO with association constants of 4.60×10⁴ and 5.90×10⁴?M^?1 and detection limits of 140 and 101.6 μM, respectively.