Bis(2-Hydroxy-3-Isopropyl-6-Methyl-Benzaldehyde)Ethylenediamine: A Novel Cation Sensor

Novel substituted phenol-based new symmetrical bis(2-hydroxy-3-isopropyl-6-methyl-benzaldehyde)ethylenediamine (1) has been designed and synthesized. The compound 1 fluorometrically recognized Cu²⁺ ion in CH₃OH/H₂O (90:10, v/v) by exhibiting an increase in emission upon complexation. In addition, Cu²⁺ gave rise to a change in colour of the solution of compound 1, which was clearly visible to the naked eye under UV irradiation. The association constant (K) of compound 1 with Cu²⁺ ion was computed with the Benesi-Hildebrand plot and Scatchard plot at 43,000 M^?1 and 43,011 M^?1 respectively.     

9, 10-Bis(8-Quinolinoxymethyl)Anthracene—A Fluorescent Sensor for Nanomolar Detection of Cu2+ with Unusual Acid Stability of Cu2+-Complex

In this work, the dipod 9,10-bis(8-quinolinoxymethyl)anthracene (1) and for comparison, monopod 9-(8-quinolinoxymethyl)anthracene (2) have been synthesized. The fluoroionophore 1 in pH 7.1 HEPES buffered CH₃CN:H₂O (4:1 v/v) solution shows quenching only with Cu²⁺ with lowest limit of detection 150 nM, amongst various metal ions. Fluoroionophore 1 could also be applied to sense Co²⁺ with lowest limit of detection 600 nM. By modulating the pH of the solution and concentration of Cu²⁺, 1 shows respective “On-Off-On” and “On-Off” fluorescent switching. The self-assembly of two Cu²⁺ ions and two molecules of fluoroionophore 1 to form closed structure [Cu₂(L)₂]⁴⁺ seems to be responsible for nanomolar sensitivity towards Cu²⁺. The combination of delayed second protonation of 1 (pK_a2?=?2.6) and stepwise protonation of [Cu₂ L ₂]⁴⁺ causes unusual stability of [Cu(LH)₂]⁴⁺ even at pH?<?2.

N-benzoate-N′ salicylaldehyde ethynelediamine: A new fluorescent sensor for Zn2+ ion by “off-on” mode

Imbalance of zinc ion (Zn²⁺) in human body causes diseases like Alzheimer’s and Parkinson’s and therefore Zn²⁺ estimation in biological fluids has diagnostic values. Fluorescence “off-on” sensors have advantages of high sensitivity and in situ application over other sensors. A new fluorescent “off-on” Zn²⁺ sensor, N-benzoate-N′ salicylaldehyde ethynelediamine (L), has been synthesisied. In 1:1(v/v) CH₃OH:PBS (PBS?=?phosphate buffer solution), L shows ca. 20 times enhancement in fluorescence intensity on interaction with Zn²⁺, due to snapping of photoinduced electron transfer (PET) process, which is selective over metal ions - Na⁺, K⁺, Ca²⁺, Ni²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺. These metal ions either individually or all together does not interfere the sensing ability of L towards Zn²⁺. A 1:1 interaction between L and Zn²⁺ ion with binding constant 10^4.25 has been established from spectroscopic data.     

New Application of a Known Molecule: Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff Base as a Colorimetric and Fluorescent “Off-On” Probe for Copper (II)

Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff base (1) has been investigated as a colorimetric and fluorescent “off-on” probe for the recognition of Cu²⁺ in aqueous solution. Probe 1 was synthesized by condensation of rhodamine B hydrazide and 8-hydroxy-2-quinolinecarboxaldehyde, which exhibited good selectivity for Cu²⁺ among a range of biologically and environmentally important metal ions. The Cu²⁺ recognition event undergoes a Cu²⁺ promoted hydrolysis of probe 1 to release rhodamine B and the recognition process is barely interfered by other coexisting metal ions.

A Rhodamine-Based Off�COn Fluorescent Chemosensor for Selectively Sensing Cu(II) in Aqueous Solution

A novel chromogenic and fluorogenic chemosensor RhB-pMOSal comprising a rhodamine fluorophore and a salicylaldehyde receptor being connected by an iminohydrazine link was synthesized and fully characterized. Its sensing behavior toward various metal ions in neutral aqueous solution was investigated by absorption and fluorescence spectroscopy. RhB-pMOSal exhibited a reversible and sensitive ??turn-on?? response of absorption and fluorescence toward Cu²⁺ in aqueous acetonitrile solution. Approximate 65 and 6-fold enhancement in the absorbance at 556 nm and fluorescence intensity at 573 nm were estimated when equivalent Cu²⁺ was added to the RhB-pMOSal solution. Under the same conditions, RhB-pMOSal displayed more sensitive than a reported analogue RhB-Sal to Cu²⁺ ion. The competition experiments for Cu²⁺ mixed with common metal ions exhibited no obvious change in absorption and emission except Cr³⁺ ion that can induce the fluorescence quenching of RhB-pMOSal to some extent.     

A highly Selective Fluorescent Sensor for Monitoring Cu<Superscript>2+</Superscript> Ion: Synthesis,Characterization and Photophysical Properties

A new fluorescent sensor, 4-allylamine-N-(N-salicylidene)-1,8-naphthalimide (1), anchoring a naphthalimide moiety as fluorophore and a Schiff base group as receptor, was synthesized and characterized. The photophysical properties of sensor 1 were conducted in organic solvents of different polarities. Our study revealed that, depending on the solvent polarity, the fluorescence quantum yields varied from 0.59 to 0.89. The fluorescent activity of the sensor was monitored and the sensor was consequently applied for the detection of Cu²⁺ with high selectivity over various metal ions by fluorescence quenching in Tris-HCl (pH = 7.2) buffer/DMF (1:1, v/v) solution. From the binding stoichiometry, it was indicated that a 1:1 complex was formed between Cu²⁺ and the sensor 1. The fluorescence intensity was linear with Cu²⁺ in the concentration range 0.5–5 μM. Moreso, the detection limit was calculated to be 0.32 μM, which is sufficiently low for good sensitivity of Cu²⁺ ion. The binding mode was due to the intramolecular charge transfer (ICT) and the coordination of Cu²⁺ with C = N and hydroxyl oxygen groups of the sensor 1. The sensor proved effective for Cu²⁺ monitoring in real water samples with recovery rates of 95–112.6 % obtained.     

Bis-Benzimidazolyl Diamide Based Fluorescent Probe for Copper(II): Synthesis, Structural and Fluorescence Studies

A new fluorescent probe based on a bis-benzimidazole diamide N ²,N ^2′-bis[(1-ethyl-benzimidazol-2-yl)methyl]biphenyl-2,2′-dicarboxamide ligand L ₁ with a biphenyl spacer group and a Copper(II) trinuclear metallacycle has been synthesized and characterized by X-ray single crystallography, elemental and spectral (FT-IR, ¹H & ¹³C NMR, UV-Visible) analysis. The fluorescence spectra of L ₁ in MeOH show an emission band centered at 300 nm. This band arises due to benzimidazolyl moiety in the ligating system. The diamide L ₁ in the presence of Cu²⁺ show the simultaneous ‘quenching’ of (300 nm) and ‘enhancement’ of (375 nm) emission band. Similar fluorescence behavior was found in water–methanol mixture (9:1). The new emission band at 375 nm is attributed to intra ligand π–π* transition of the biphenyl moiety. L ₁ exhibited high selectivity and sensitivity towards Cu²⁺ in both the medium over other common metal ions like Ni²⁺, Co²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Pb²⁺ and Hg²⁺. The binding constant with Cu²⁺ was calculated by the Benesi-Hildebrand equation. Selective “off-on-off” behavior of L ₁ in methanol has also been studied. The fluorescent intensity of 375 nm bands in L ₁ enhances (turns-on) upon addition of Cu²⁺ and quenches (turn-off) upon addition of Na₂-EDTA.     

A Phenylbenzothiazole Derived Fluorescent Sensor for Zn(II) Recognition in Aqueous Solution Through “Turn-On” Excited-State Intramolecular Proton Transfer Emission

A highly selective and sensitive fluorescent Zn²⁺ sensor N-(2-(benzo[d]thiazol-2-yl)phenyl)-2-((pyridin-2-ylmethyl)amino)acetamide (1) that derived from 2-(2′-aminophenyl)benzothiazole has been developed. In aqueous solution (HEPES/CH₃CN=4/6, v/v, HEPES 20 mM, pH?=?7.4), sensor 1 displays highly selective recognition to Zn²⁺ over other metal ions with a distinct longer-wavelength emission enhancement. Sensor 1 binds Zn²⁺ through its amide form with a 1:1 binding stoichiometry, which switched on the excited-state intramolecular proton transfer (ESIPT). Graphical Abstract

A simple 2-(2′-aminophenyl)benzothiazole-based fluorescent “off-on” sensor for Zn²⁺ recognition in HEPES/CH₃CN(4/6, v/v, HEPES 20 mM, pH?=?7.4) solution through switching on ESIPT has been developed.     

Urea Based Dipodal Fluorescence Receptor for Sensing of Fe3+ Ion in Semi-Aqueous Medium

Urea based fluorescent chemosensor 1 was synthesized. Receptor 1 shows unique selectivity for the Fe³⁺ion and no such significant response was noticed with other metal ions (Cr³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Bi³⁺) in DMSO/H₂O (50:50,v/v) semi-aqueous solution. The binding features have been established by absorption and fluorescence spectroscopic methods. The binding constant (K) values obtained from Benesi-Hildebrand, Scatchard and Connor plot for receptor 1 is (8.3?±?0.3) × 10³ M^?1 and has good detection limit 0.7?μM. The stoichiometry of 1.Fe³⁺ complex was confirmed by mass spectroscopy and Job’s plot.

Structurally Simple Ferrocene Derivatives for Selective Cadmium Sensing

Three new ferrocene based Schiff bases 4-{[(E)-ferrocenylmethylidene] amino}benzenethiol (1b), 3-{[(E)-ferrocenylmethylidene]amino} benzenethiol (1c), 2-{[(E)-ferrocenylmethylidene]amino} benzenethiol (1d) have been synthesized to study their sensor property to various metal ions. It has been observed that 1b is highly fluorescent and its fluorescence changes in presence of metal ions. It was further observed that compound 1b is highly selective towards Cd²⁺ ion in solution.     

Luminescent Benzothiazole-Based Fluorophore of Anisidine Scaffoldings: a “Turn-On” Fluorescent Probe for Al<Superscript>3+</Superscript> and Hg<Superscript>2+</Superscript> Ions

A new anisidine possessing benzothiaozle-based chemosensor (1) has been designed and synthesized. The chemosensor 1 was designed to provide hard base environment for ratiometric detection of comparatively less studied Al³⁺ ions. In CH₃CN, the fluorescence spectra of chemosensor 1 red shifted from 368 to 430 nm with addition of Al³⁺ and Hg²⁺ ions; while Cu²⁺ ions caused quenching of emission intensity of 1. These differential changes observed with Al³⁺ and Cu²⁺ ions addition enabled chemosensor 1 to construct “NOR” and “TRANSFER” logic gates.     

A Novel Series Colorimetric and Off–On Fluorescent Chemosensors for Fe3+ Based on Rhodamine B Derivative

A novel series colorimetric and off–on fluorescent chemosensors (2a, 2b, 2c) were designed and synthesized, which showed reversible and highly selective and sensitive recognition toward Fe³⁺ over other examined metal ions. Upon addition of Fe³⁺, sensors (2a, 2b) exhibit remarkably and 2c exhibits moderate enhanced absorbance intensity and color change from colorless to pink in CH₃OH–H₂O(1:1, v/v). The three compounds (2a, 2b, 2c) may therefore be applicable as rhodamine-based turn-on type fluorescent chemosensors.     

Salicylaldehyde Phenylhydrazone: A New Highly Selective Fluorescent Lead (II) Probe

The fluorescence intensity of salicylaldehyde phenylhydrazone (L), in 1:1 (v/v) CH₃OH:H₂O was enhanced by ca. 100 times with a blue shift in emission maximum, on interaction with Pb²⁺ ion. No enhancement in fluorescent intensity of L was observed on interaction with metal ions - Na⁺, K⁺, Ca²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cd²⁺ and Hg²⁺. This signal transduction was found to occur via photoinduced electron transfer (PET) mechanism. A 1:1 complexation between Pb²⁺ and L with log β?=?7.86 has been proved from fluorescent and UV/Visible spectroscopic data. The detection limit of Pb²⁺ was calculated to be 6.3?×?10^?7?M.     

Coumarin Based Fluorescent Probe for Colorimetric Detection of Fe<Superscript>3+</Superscript> and Fluorescence Turn On-Off Response of Zn<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A new coumarin based Schiff-base chemosensor-(E)-7-(((8-hydroxyquinolin-2-yl)methylene) amino)-4-methyl-2H-chromen-2-one (H ₁₁ L) was synthesized and evaluated as a colorimetric sensor for Fe³⁺ and fluorescence “turn on-off” response of Zn²⁺ and Cu²⁺ using absorption and fluorescence spectroscopy. Upon treatment with Fe³⁺ and Zn²⁺, the absorption intensity as well as the fluorescence emission intensity increases drastically compared to other common alkali, alkaline earth and transition metal ions, with a distinct color change which provide naked eye detection. Formation of 1:1 metal to ligand complex has been evaluated using Benesi-Hildebrand relation, Job’s plot analyses, ¹H NMR titration as well as ESI-Mass spectral analysis. The complex solution of H ₁₁ L with Zn²⁺ ion exhibited reversibility with EDTA and regenerate free ligand for further Zn²⁺ sensing. H ₁₁ L exhibits two INHIBIT logic gates with two different chemical inputs (i) Zn²⁺ (IN1) and Cu²⁺ (IN2) and (ii) Zn²⁺ (IN1) and EDTA (IN2) and the emission as output. Again, an IMPLICATION logic gate is obtained with Cu²⁺ and EDTA as chemical inputs and emission as output mode. Both free ligand as well as metal-complexes was optimized using density functional theory to interpret spectral properties. The corresponding energy difference between HOMO-LUMO energy gap for H ₁₁ L, H₁₁L-Zn²⁺ and H₁₁L-Cu²⁺ are 2.193, 1.834 and 0.172 eV, respectively.     

Unsymmetrically Substituted Nickel Triazatetra-Benzcorrole and Phthalocynanine Complexes: Conjugation to Quantum Dots and Applications as Fluorescent “Turn ON” Sensors

We report on the design and application of fluorescent nanoprobes based on the covalent linking of _L-glutathione-capped CdSe@ZnS quantum dots (QDs) to newly synthesized unsymmetrically substituted nickel mercaptosuccinic acid triazatetra-benzcorrole (3) and phthalocyanine (4) complexes. Fluorescence quenching of the QDs occurred on conjugation to complexes 3 or 4. The nanoprobes were selectively screened in the presence of different cations and Hg²⁺ showed excellent affinity in “turning ON” the fluorescence of the nanoprobes. Experimental results showed that the sensitivity of QDs-4 towards Hg²⁺ was much higher than that of QDs-3 nanoprobe. The mechanism of reaction has been elucidated based on the ability of Hg²⁺ to coordinate with the sulphur atom of the Ni complex ring and apparently “turn ON” the fluorescence of the linked QDs.     

Off-on Fluorescent Sensor from On-off Sensor: Exploiting Silver Nanoparticles Influence on the Organic Fluorophore Fluorescence

Turn-off fluorescence of organic fluorophore, 2-{[4-(2H-Naphtho[1,2-d][1,2,3]triazol-2-yl)-phenyl]carboxylic acid (NTPC), with metal ions (Fe³⁺, Cu²⁺, Pb²⁺) was converted into turn-on fluorescent sensor for biologically important Zn²⁺, Cu²⁺ and Fe³⁺ metal ions in aqueous solution at ppb level by exploiting strong fluorescence quenching phenomena of metal nanoparticles when organic fluorophores assembled in the vicinity of metallic surface. Amino acid attached phenolic ligands (L) were used as reducing as well as functional capping agents in the synthesis of silver nanoparticles (AgNPs). The hydrogen bonding functionality of L facilitated the assembling of NTPC in the vicinity of metallic surfaces that leads to complete quenching of NTPC fluorescence. The strong and selective coordination of L with metal ions (Zn²⁺, Cu²⁺ and Fe³⁺) separates the NTPC from the AgNPs surface that turn-on the NTPC fluorescence. HR-TEM and absorption studies confirm the metal coordination with L and separation of NTPC from the AgNPs surface. Mn²⁺ showed selective red shifting of NTPC fluorescence after 12 h with all sample. Effects of different amino acid attached phenolic ligands were explored in the metal ion sensitivity and selectivity. This approach demonstrates the multifunctional utility of metal NPs in the development of turn-on fluorescence sensor for paramagnetic heavy metal ions in aqueous solution.

A Novel Colorimetric and Fluorescent “Off-On” Chemosensor for Cu2+ Based on a Rhodamine Derivative Bearing Naphthyridine Group

A new rhodamine-based derivative bearing a naphthyridine group (compound 1) was synthesized as a colorimetric and fluorescent “off-on” chemosensor for Cu²⁺ in aqueous solutions. The sensing behaviors of 1 toward various metal ions in neutral aqueous solutions were investigated by absorption and fluorescence spectroscopies. Compound 1 is found to exhibit a significant increase in absorbance at 561 nm and an amplified fluorescence at 590 nm toward Cu²⁺ in a selective, sensitive and rapid manner. The quantification of Cu²⁺ by 1 using an absorption spectroscopy method was satisfactory in the linear working range 0.9–10 μM, with a detection limit of 5.4?×?10^?8?M for Cu²⁺ and good tolerance of other metal ions. Upon addition of Cu²⁺, the spirolactam ring (colorless and nonfluorescent) of 1 was opened to ring-opened amide (red color and fluorescent) and a 1:1 stoichiochemetry for the 1-Cu²⁺ complex was formed with an association constant of 1.57?×?10⁴?M^?1.     

A New On-fluorescent Probe for Manganese (II) Ion

A new fluorescent probe for Mn²⁺ ion, (6E)-N-((E)-1,2-diphenyl-2-(pyridin-2-ylimino)ethylidene)pyridin-2-amine (L), has been synthesized from benzil and 2-amino pyridine and characterized. In 1:1 (v/v) CH₃CN:H₂O (pH 4.0, universal buffer) L exhibits fluorescent intensity with emission peak at λ_max 360 nm on excitation with photons of 310 nm. Fluorescent intensity of L increases distinguishingly on interaction with Mn²⁺ ion compared to metal ions—Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Ag⁺ individually or all together. The enhancement in fluorescent intensity is due to snapping of photoinduced electron transfer (PET) prevailed in free L. Fluorescence and UV/visible spectral data analysis shows that binding stoichiometry between Mn²⁺ and L is 1:1 with log β?≈?3.0. Both L and its Mn²⁺ complex were optimised using density functional theory (DFT) and vibrational frequency calculations confirm that both are at local minima on the potential energy surfaces.     

Both “Naked-Eye” and Fluorescent Sensor for Hg2+ Based upon 8-Hydroxyquinoline

A chemosensor, 2,2′-(1,4-phenylenedivinylene)bis-8-acetoxyquinoline (1), its fluorescent sensing behavior toward representative alkali ions (Na⁺, K⁺), alkaline earth ions (Mg²⁺, Ca²⁺), and transition-metal ions (Ni²⁺, Cu²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Cd²⁺) was intensively investigated. The compound (1) exhibited pronounced Hg²⁺ selective on–off-type fluoroionophoric properties among the representative ions in DMF/ethanol (1:9, v/v) solution. Moreover, the highly Hg²⁺-selective fluorescence quenching property in conjunction with a visible colorimetric change from colorless to light yellow can be observed, leading to potential fabrication of both “naked-eye” and fluorescent detection of Hg²⁺.     

A Sensitive Schiff-Base Fluorescent Chemosensor for the Selective Detection of Zn2+

A Schiff-base fluorescent probe – N, N^/-bis(salicylidene) trans 1, 2 – diaminocyclohexane (H ₂ L) was synthesized and evaluated as a chemoselective Zn²⁺ sensor. Upon treatment with Zn²⁺, the complexation of H ₂ L with Zn²⁺ resulted in a bathochromic shift with a pronounced enhancement in the fluorescence intensity in ethanol solution. Moreover, other common alkali, alkaline earth and transition metal ions failed to induce response or minimal spectral changes. Notably, this chemosensor could distinguish clearly Zn²⁺ from Cd²⁺. The stoichiometric ratio and association constant were evaluated using Benesi – Hildebrand relation giving 1:1 stoichiometry. This further corroborated 1:1 complex formation based on Job’s plot analyses.