Metal alkoxides as versatile precursors for group 4 phosphonates: synthesis and X-ray structure of a novel organosoluble zirconium phosphonate

Reactions of Ph2P(O)(OH) and t-BuP(O)(OSiMe3)(OH) with Ti(O-i-Pr)4 in equimolar ratios gave titanium phosphonates of the type [(O-i-Pr)3Ti(mu-O)2PR1R2]2 (1, R1 = R2 = Ph; 2, R1 = t-Bu, R2 = OSiMe3) as colorless crystalline solids in moderate yields. Reactions of Ph2P(O)(OH) and the isopropoxides of zirconium and hafnium resulted in products of the composition [(O-i-Pr)3M(mu-O-i-Pr)2(mu-OPOPh2)M(O-i-Pr)2]Ph2P(O)(OH) (M = Zr (3), Hf (4)) in high yields. The compounds were characterized by 1H, 31P, and 29Si NMR, infrared (IR), and mass spectroscopic (MS) techniques. The molecular structures of 2 and 3 were confirmed by X-ray crystallography.     

Thermodynamic and kinetic studies of H atom transfer from HMo(CO)3(eta(5)-C5H5) to Mo(N[t-Bu]Ar)3 and (PhCN)Mo(N[t-Bu]Ar)3: direct insertion of benzonitrile into the Mo-H bond of HMo(N[t-Bu]Ar)3 forming (Ph(H)C=N)Mo(N[t-Bu]Ar)3

Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported. The enthalpy of reaction of 1-H and 2 in toluene solution has been measured by solution calorimetry (DeltaH = -13.1 +/- 0.7 kcal mol(-1)) and used to estimate the Mo-H bond dissociation enthalpy (BDE) in 2-H as 62 kcal mol(-1). The enthalpy of reaction of 1-H and 2-NCPh in toluene solution was determined calorimetrically as DeltaH = -35.1 +/- 2.1 kcal mol(-1). This value combined with the enthalpy of hydrogenation of [Mo(CO)3(Cp)]2 (1(2)) gives an estimated value of 90 kcal mol(-1) for the BDE of the ketimide C-H of 2-NC(H)Ph. These data led to the prediction that formation of 2-NC(H)Ph via nitrile insertion into 2-H would be exothermic by approximately 36 kcal mol(-1), and this reaction was observed experimentally. Stopped flow kinetic studies of the rapid reaction of 1-H with 2-NCPh yielded DeltaH(double dagger) = 11.9 +/- 0.4 kcal mol(-1), DeltaS(double dagger) = -2.7 +/- 1.2 cal K(-1) mol(-1). Corresponding studies with DMo(CO)3(Cp) (1-D) showed a normal kinetic isotope effect with kH/kD approximately 1.6, DeltaH(double dagger) = 13.1 +/- 0.4 kcal mol(-1) and DeltaS(double dagger) = 1.1 +/- 1.6 cal K(-1) mol(-1). Spectroscopic studies of the much slower reaction of 1-H and 2 yielding 2-H and 1/2 1(2) showed generation of variable amounts of a complex proposed to be (Ar[t-Bu]N)3Mo-Mo(CO)3(Cp) (1-2). Complex 1-2 can also be formed in small equilibrium amounts by direct reaction of excess 2 and 1(2). The presence of 1-2 complicates the kinetic picture; however, in the presence of excess 2, the second-order rate constant for H atom transfer from 1-H has been measured: 0.09 +/- 0.01 M(-1) s(-1) at 1.3 degrees C and 0.26 +/- 0.04 M(-1) s(-1) at 17 degrees C. Study of the rate of reaction of 1-D yielded kH/kD = 1.00 +/- 0.05 consistent with an early transition state in which formation of the adduct (Ar[t-Bu]N)3Mo...HMo(CO)3(Cp) is rate limiting.     

1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-: a noninnocent ligand. Syntheses, structures, and mechanisms of formation of [(n-Bu)4N][FeIV2(mu-N)(bpb)2(X)2] (X = CN-, N3-) and the electronic structures of [MIII(bpbox1)(CN)2] (M = Co, Fe)

The well-known tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-, and its 4,5-dichloro analogue, (bpc)2-, are shown to be "noninnocent" ligands in the sense that in coordination compounds they can exist in their radical one- and diamagnetic two-electron-oxidized forms (bpbox1)- and (bpbox2)0 (and (bpcox1)- and (bpcox2)0), respectively. Photolysis of high-spin [(n-Bu)4N][FeIII(bpb)(N3)2] and its (bpc)2- analogue in acetone solution at room temperature generates the diamagnetic dinuclear complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(N3)2] and its (bpc)2- analogue; the corresponding cyano complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2] has been prepared via N3- substitution by CN-. Photolysis in frozen acetonitrile solution produces a low-spin ferric species (S = 1/2) which presumably is [FeIII(bpbox2)(N)(N3)]-, as has been established by EPR and M?ssbauer spectroscopy. The mononuclear complexes [(n-Bu)4N][FeIII(bpb)(CN2)] (low spin), [Et4N][CoIII(bpb)(CN)2] and Na[CoIII(bpc)-(CN)2].3CH3OH can be electrochemically or chemically one-electron-oxidized to give [FeIII(bpbox1)(CN)2]0 (S = 0), [CoIII(bpbox1)(CN)2]0 (S = 1/2), and [CoIII(bpcox1)(CN)2]0 (S = 1/2). All complexes have been characterized by UV-vis, EPR, and M?ssbauer spectroscopy, and their electro- and magnetochemistries have been studied. The crystal structures of [(n-Bu)4N][FeIII(bpb)(N3)2].1/2C6H6CH3, Na[FeIII(bpb)(CN)2], Na[CoIII(bpc)(CN)2].3CH3OH, [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2], and [(n-Bu)4N][FeIV2(mu-N)(bpb)(N3)2] have been determined by single-crystal X-ray diffraction.     

Phosphaniminato-Komplexe des Titans. Synthese und Kristallstrukturen von CpTiCl2(NPMe3), [TiCl3(NPMe3)]2, [Ti2Cl5(NPMe2Ph)3] und [Ti3Cl6(NPMe3)5][BPh4]

Phosphoraneiminato Complexes of Titanium. Synthesis and Crystal Structures of CpTiCl₂(NPMe₃), [TiCl₃(NPMe₃)]₂, [Ti₂Cl₅(NPMe₂Ph)₃], and [Ti₃Cl₆(NPMe₃)₅][BPh₄] The title compounds are formed from Cp₂TiCl₂ and titanium tetrachloride, respectively, and the corresponding phosphane imino compounds Me₃SiNPMe₃ and Me₃SiNPMe₂Ph. The tetraphenyl borate salt yielded from the reaction of [Ti₃Cl₆(NPMe₃)₅]Cl with NaBPh₄. All compounds form yellow crystals which are sensitive to moisture. They were characterized by IR-spectroscopy and crystal structure analyses. CpTiCl₂(NPMe₃) ( 1 ): Space group Pbca, Z = 8, solution of the structure with 1632 observed independent reflections, R = 0.037. Lattice dimensions at 19°C: a = 1202.6, b = 1224.2, c = 1766.7 pm. The molecules of the compound are monomeric with the (NPMe₃)^? ligand in almost linear array (bond angle Ti? N? P 170.7°). [TiCl₃(NPMe₃)]₂ ( 2 ): Space group Pbca, Z = 8, structure solution with 698 observed independent reflections, R = 0.030. Lattice dimensions at ?60°C: a = 1140.5, b = 1112.2, c = 1589.4 pm. In 2 the titanium atoms, which occur in trigonal bipyramidal coordination, are linked by the N atoms of the (NPMe₃)^? groups to form a centrosymmetric dimer with Ti? N bond lengths of 184.3 and 208.2 pm. [Ti₂Cl₅(NPMe₂Ph)₃] · CH₂Cl₂ ( 3 ): Space group Pca2₁, Z = 4, structure solution with 8477 observed independent reflections, R = 0.051. The lattice dimensions at 20°C are: a = 1221.0; b = 1407.5, c = 2139.3 pm. 3 can be understood as a reaction product of TiCl₂(NPMe₂Ph)₂ and TiCl₃(NPMe₂Ph). In the resulting, heavily distorted Ti₂N₂-four-membered ring the Ti? N bond lenghts are 1804., 194.4, 199.2, and 234.6 pm. The longest Ti? N bond is in trans-position to the N atom of the terminal (NPMe₂Ph)- ligand, in which the Ti? N distance is 175.6 pm. .[Ti₃CL₆(NPMe₃)₅][BPh₄] (4): Space group P2₁/n, structure solution with 2846 observed independent reflections, R = 0.062. The lattice dimensions at 20°C are: a = 1495.2, b = 2335.4, c = 155,8 pm, β = 93.28°. In the cation of 4 the three titanium atoms along with three (NPMe₃)- groups with μ2- N functions and two (NPMe₃)- groups with μ3- N functions form a nation number 6 with two terminal chlorine atoms.     

Asymmetric synthesis of allyl- and alpha-allenylamines from chiral imines and alkynes via (eta(2)-imine)Ti(O-i-Pr)2 complexes

[reaction: see text] The reaction of a divalent titanium reagent Ti(O-i-Pr)(4)/2i-PrMgX with optically active arylaldimines derived from arylaldehydes and O-methylphenylglycinol provided, in a highly diastereoselective manner, chiral (eta(2)-imine)Ti(O-i-Pr)(2) complexes, which in turn reacted with 1-alkynes or propargyl compounds to give optically active allyl- and alpha-allenylamines, respectively.     

A family of oxo-chalcogenide molybdenum and tungsten complexes, (n-Bu4N)2[M2O2(mu-Q)2(1,3-dithiole-2-thione-4,5-dithiolate)2] (M = Mo, W; Q = S, Se): new synthetic entries, structure, and gas-phase behavior

A new series of complexes with the general formula (n-Bu4N)2[M2O2(micro-Q)2(dmit)2] (where M = Mo, W; Q = S, Se; dmit = 1,3-dithiole-2-thione-4,5-dithiolate) have been prepared. Fragmentation of the trinuclear cluster (n-Bu4N)2[Mo3(micro3-S)(micro-S2)3(dmit)3] in the presence of triphenylphosphine (PPh3) gives the dinuclear compound (n-Bu4N)2[Mo2O2(micro-S)2(dmit)2] [(n-Bu4N)2[2]], which is formed via oxidation in air from the intermediate (n-Bu4N)2[Mo3(micro3-S)(micro-S)3(dmit)3] [(n-Bu4N)2[1]] complex. Ligand substitution of the molybdenum sulfur bridged [Mo2O2(micro-S)2(dimethylformamide)6]2+ dimer with the sodium salt of the dmit dithiolate also affords the dianionic compound (n-Bu4N)2[2]. The whole series, (n-Bu4N)2[Mo2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[3]], (n-Bu4N)2[W2O2(micro-S)2(dmit)2] [(n-Bu4N)2[4]], (n-Bu4N)2[W2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[5]], and (n-Bu4N)2[Mo2O2(micro-S)2(dmid)2] [(n-Bu4N)2[6]; dmid = 1,3-dithiole-2-one-4,5-dithiolate], has been synthesized by the excision of the polymeric (Mo3Q7Br4)x phases with PPh3 or 1,2-bis(diphenylphosphanyl)ethane in acetonitrile followed by the dithiolene incorporation and further degradation in air. Direct evidence of the presence of the intermediates with the formula [M3Q4(dmit)3]2- (M = Mo, W; Q = S, Se) has been obtained by electrospray ionization mass spectrometry. The crystal structures of (n-Bu4N)2[1], (PPh4)2[Mo2O2(micro-S)2(dmit)2] [(PPh4)2[2]; PPh4 = tetraphenylphosphonium], (n-Bu4N)2[2], (n-Bu4N)2[4], (PPh4)2[W2O2(micro-Se)2(dmit)2] [(PPh4)2[5]], and (n-Bu4N)2[6] have been determined. A detailed study of the gas-phase behavior for compounds (n-Bu4N)2[2-6] shows an identical fragmentation pathway for the whole family that consists of a partial breaking of the two dithiolene ligands followed by the dissociation of the dinuclear cluster.     

Synthesis and structural characterization of functionalized dimeric aluminophosphonates and a monomeric gallophosphonate anion

Reaction of t-BuP(O)(OSiMe(3))(OH) with Me(3)Al leads to the formation of [Me(2)Al(mu-O)(2)P(OSiMe(3))(t-Bu)](2) (1) whereas Me(2)AlCl reacts with Ph(2)P(O)(OH) to yield [(Cl)(Me)Al(mu-O)(2)PPh(2)](2) (2). These compounds represent the first examples of functionalized dimeric four-ring type aluminophosphonate systems. The double four-ring type gallophosphonate, namely, [t-BuPO(3)GaMe](4), reacts with n-Bu(4)NHF(2) under ambient conditions, resulting in the formation of a monomeric gallophosphonate [n-Bu(4)N][MeGa[t-BuPO(2)(OH)](3)] (3). These derivatives have been adequately characterized using various spectroscopic techniques and X-ray diffraction studies.     

(RO)(2)Ta[tris(2-oxy-3,5-dimethylbenzyl)amine]: structure and lactide polymerization activities

The novel atrane-like six-coordinate (RO)(2)TaL complexes [where R = Me or Et and L = tris(2-oxy-3,5-dimethylbenzyl)amine] containing three six-membered rings have been synthesized and characterized. The R = Me complex is the first group 5 representative of this class of compounds structurally characterized by X-ray means. Somewhat surprisingly, these compounds failed to function as single-site initiators for the polymerization of l-LA to isotactic PLA and rac-LA to atactic PLA, whereas Ta(OEt)(5) and two titanium analogues ROTiL (where R = 2,6-di-i-PrC(6)H(3) and i-Pr) as well as Ti(O-i-Pr)(4) were effective catalysts for both polymerizations.     

Studies of a series of [Ni(P(R)2N(Ph)2)2(CH3CN)]2+ complexes as electrocatalysts for H2 production: substituent variation at the phosphorus atom of the P2N2 ligand

A series of [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes containing the cyclic diphosphine ligands [P(R)(2)N(Ph)(2) = 1,5-diaza-3,7-diphosphacyclooctane; R = benzyl (Bn), n-butyl (n-Bu), 2-phenylethyl (PE), 2,4,4-trimethylpentyl (TP), and cyclohexyl (Cy)] have been synthesized and characterized. X-ray diffraction studies reveal that the cations of [Ni(P(Bn)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) and [Ni(P(n-Bu)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) have distorted trigonal bipyramidal geometries. The Ni(0) complex [Ni(P(Bn)(2)N(Ph)(2))(2)] was also synthesized and characterized by X-ray diffraction studies and shown to have a distorted tetrahedral structure. These complexes, with the exception of [Ni(P(Cy)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2), all exhibit reversible electron transfer processes for both the Ni(II/I) and Ni(I/0) couples and are electrocatalysts for the production of H(2) in acidic acetonitrile solutions. The heterolytic cleavage of H(2) by [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes in the presence of p-anisidine or p-bromoaniline was used to determine the hydride donor abilities of the corresponding [HNi(P(R)(2)N(Ph)(2))(2)](BF(4)) complexes. However, for the catalysts with the most bulky R groups, the turnover frequencies do not parallel the driving force for elimination of H(2), suggesting that steric interactions between the alkyl substituents on phosphorus and the nitrogen atom of the pendant amines play an important role in determining the overall catalytic rate.     

Boron and aluminum complexes of sterically demanding phosphinimines and phosphinimides

Reactions of sterically demanding phosphinimines R3PNH [R=i-Pr (1), t-Bu (2)] were examined. Reactions with B(C6F5)3 formed the adducts (R3PNH)B(C6F5)3 [R=i-Pr (3), t-Bu (4)] in high yield. On the other hand, 2 reacts with HB(OBu)2, evolving H2 to give t-Bu3PNB(OBu)2 (5). The reaction of 2 equiv of 2 with BH3.SMe2 affords the species (t-Bu3PN)2BH (6). In contrast, the reaction of n-Bu(t-Bu)2PNH with BH3.SMe2 results in the formation of the robust adduct n-Bu(t-Bu)2PNH.BH3 (8). An alternative route to borane-phosphinimide complexes involves Me3SiCl elimination, as exemplified by the reaction of BCl2Ph with n-Bu3PNSiMe3, which gives the product n-Bu3PNBCl(Ph) (9). The corresponding reactions of the parent phosphinimines 1 and 2 with AlH3.NMe2Et give the dimers [(mu-i-Pr3PN)AlH2]2 (10) and [(mu-t-Bu3PN)AlH2]2 (11). Species 11 reacts further with Me3SiO3SCF3 to provide [(mu-t-Bu3PN)AlH(OSO2CF3)]2 (12). The reaction of the lithium salt [t-Bu3PNLi]4 (13) with BCl3 proceeds smoothly to give t-Bu3PNBCl2 (14), which is readily alkylated to give t-Bu3PNBMe2 (15). Subsequent reaction of 15 with B(C6F5)3 results in methyl abstraction and the formation of [(mu-t-Bu3PN)BMe]2[MeB(C6F5)3]2 (16). The reaction of 13 in a 2:1 ratio with BCl3 gives the salt [(t-Bu3PN)2B]Cl (17). This species can be methylated to give (t-Bu3PN)2BMe (18), which undergoes subsequent reaction with [Ph3C][X] (X=[B(C6F5)4], [PF6]) to form the related salts [(t-Bu3PN)2B][B(C6F5)4] (19) and [(t-Bu3PN)2B][PF6] (20), respectively. Analogous reactions with [Ph3C][BF4] afforded [t-Bu3PNBF2]2 (21). Compounds 3, 4, 6, 8, 11, 12, 17, 19, and 21 were characterized by X-ray crystallography.     

Titanium isopropoxide complexes of a series of sterically demanding aryloxo based [N2O2]2- ligands as precatalysts for ethylene polymerization

Several titanium isopropoxide complexes [N,N'-bis(2-oxo-3-R(1)-5-R(2)-phenylmethyl)-N,N'-bis(methylene-p-R(3)-C(6)H(4))-ethylenediamine]Ti(O(i)Pr)(2) [R(1) = t-Bu, R(2) = Me, R(3) = H (1b); R(1) = R(2) = t-Bu, R(3) = H, (2b); R(1) = R(2) = Cl, R(3) = H, (3b), R(1) = t-Bu, R(2) = Me, R(3) = Cl (4b); R(1) = R(2) = t-Bu, R(3) = Cl, (5b); R(1) = R(2) = R(3) = Cl, (6b)] supported over sterically demanding aryloxy based [N(2)O(2)]H(2) ligands have been designed as precatalysts for the ethylene polymerization. Specifically, the 1b-6b complexes, when treated with methylaluminoxane (MAO) under 88 ± 0.5 psi of ethylene at 30 °C for 3 h, produced polyethylene polymers of high molecular weight (M(w) = ca. 7.2-8.3 × 10(5) g mol(-1)) having broad molecular weight distribution (PDI = ca. 13.1-14.6). The 1b-6b complexes were conveniently synthesized from the direct reaction of the [N(2)O(2)]H(2) ligands, 1a-6a, with Ti(O(i)Pr)(4) in 69-86% yield.     

含有烯丙基亚胺酚配体的ⅣB族烯烃聚合催化剂以及制备双峰分布聚乙烯(英)

选择含有烯丙基亚胺酚为辅助配体，设计合成了5个ⅣB族钛锆金属络合物[{CH₂=CHCH₂N=CH-C₆H₃(3-R)O}₂MCl₂](4a：R=t-Bu，M=Zr；4b：R=t-Bu，M=Ti；4c：R=Ph，M=Zr；4d：R=Ph，M=Ti)和[{(CH₃)₂CHCH₂N=CH-C₆H₃(3-t-Bu)O}₂ZrCl₂] (5)，对它们进行了红外光谱、核磁共振及元素分析表征。并用X-射线单晶衍射法测定了化合物4a和4d的晶体结构。部分配合物在助催化剂MMAO的作用下对烯烃聚合显示了较好的催化活性，其中自固载催化剂4a生成了双峰分布的聚烯烃产品 (M_w/M_n=15.3～31.9)。     

多硫二硫烯铜配合物(n-Bu4N)[Cu(cddt)2]和(Ph4P)[Cu(cddt)2]的合成、表征及其结构

Two copper complexes with a new multi-sulfur 1,2-dithiolene ligand, C[Cu(cddt)₂] (C=tetrabutylammoni-um, n-Bu₄N⁺; tetraphenylphosphonium, Ph₄P⁺; cddt = 4a, 6, 7, 7a-5H-cyclopenta[b]-1,4-dithiin-2,3 dithi-olate) have been synthesized and characterized by electrochemical studies, IR, EA, etc. The structure of (Ph₄P)[Cu(cddt)₂] was determined by single crystal X-ray analysis. The complex was crystallized in the triclinic, space group P1 with the cell dimensions a=10.460(2)?, b=13.000(3)?,c=16.270(3)?, α=86.68(3)°,β= 71.92(3)°,γ=66.66(3)° and Z=2. R₁=0.0548, wR₂=0.1358 for 6786 independent reflections. The four S atoms surround the Cu atom [CuS₄] core is a square-planar environment.     

SHOP-type nickel complexes with alkyl substituents on phosphorus, synthesis and catalytic ethylene oligomerization

The beta-keto phosphorus ylides (n-Bu)3P=CHC(O)Ph 6, (t-Bu)2PhP=CHC(O)Ph 7, (t-Bu)Ph2P=CHC(O)Ph 8, (n-Bu)2PhP=CHC(O)Ph 9, (n-Bu)Ph2P=CHC(O)Ph 10, Me2PhP=CHC(O)Ph 11 and Ph3P=CHC(O)(o-OMe-C6H4) 12 have been synthesized in 80-96% yields. The Ni(II) complexes [NiPh{Ph2PCH...C(...O)(o-OMeC6H4)}(PPh3)] 13, [NiPh{Ph(t-Bu)PCHC(O)Ph}(PPh3)] 15, [NiPh{(n-Bu)2PCH...C(...O)Ph}(PPh3)] 16 and [NiPh{Ph(n-Bu)PCH...C(...O)Ph}(PPh3)] 17 have been prepared by reaction of equimolar amounts of [Ni(COD)2] and PPh3 with the beta-keto phosphorus ylides 12 or 8-10, respectively, and characterized by 1H and 31P{1H} NMR spectroscopy. NMR studies and the crystal structure determination of 13 indicated an interaction between the hydrogen atom of the C-H group alpha to phosphorus and the ether function. The complexes [NiPh{Ph2PCHC(O)Ph}(Py)] 18, [NiPh{Ph(t-Bu)PCHC(O)Ph}(Py)] 19, [NiPh{(n-Bu)2PCH...C(...O)Ph}(Py)] 20, [NiPh{Ph(n-Bu)PCH...C(...O)Ph}(Py)] 21 and [NiPh{Me2PCH...C(...O)Ph}(Py)] 22 have been isolated from the reactions of [Ni(COD)2] and an excess of pyridine with the -keto phosphorus ylides Ph3PCH=C(O)Ph 3 or 8-11, respectively, and characterized by 1H and 31P{1H} NMR spectroscopy. Ligands 3, 8, 10 and 12 have been used to prepare in situ oligomerization catalysts by reaction with one equiv. of [Ni(COD)2] and PPh3 under an ethylene pressure of 30 or 60 bar. The catalyst prepared in situ from 12, [Ni(COD)2] and PPh3 was the most active of the series with a TON of 12700 mol C2H4 (mol Ni)-1 under 30 bar ethylene. When the beta-keto phosphorus ylide 8 was reacted in situ with three equiv. of [Ni(COD)2] and one equiv. of PPh3 under 30 bar of ethylene, ethylene polymerization was observed with a TON of 5500 mol C2H4 (mol Ni)-1.     

(Ph)3PBr][Br7], [(Bz)(Ph)3P]2[Br8], [(n-Bu)3MeN]2[Br20], [C4MPyr]2[Br20], and [(Ph)3PCl]2[Cl2I14]: extending the horizon of polyhalides via synthesis in ionic liquids

The five polyhalides [(Ph)(3)PBr][Br(7)], [(Bz)(Ph)(3)P](2)[Br(8)], [(n-Bu)(3)MeN](2)[Br(20)], [C(4)MPyr](2)[Br(20)] ([C(4)MPyr] = N-butyl-N-methylpyrrolidinium), and [(Ph)(3)PCl](2)[Cl(2)I(14)] were prepared by the reaction of dibromine and iodine monochloride in ionic liquids. The compounds [(Ph)(3)PBr][Br(7)] and [(Bz)(Ph)(3)P](2)[Br(8)] contain discrete pyramidal [Br(7)](-) and Z-shaped [Br(8)](2-) polybromide anions. [(n-Bu)(3)MeN](2)[Br(20)] and [C(4)MPyr](2)[Br(20)] exhibit new infinite two- and three-dimensional polybromide networks and contain the highest percentage of dibromine ever observed in a compound. [(Ph)(3)PCl](2)[Cl(2)I(14)] also consists of a three-dimensional network and is the first example of an infinite polyiodine chloride. All compounds were obtained from ionic liquids as the solvent that, on the one hand, guarantees for a high stability against strongly oxidizing Br(2) and ICl and that, on the other hand, reduces the high volatility of the molecular halogens.     

Synthesis, crystal structures, and reactivity of osmium(II) and -(IV) complexes containing a dithioimidodiphosphinate ligand

Reduction of trans-[OsL2(O)2] (1) (L-=[N(i-Pr2PS)2]-) with hydrazine hydrate afforded a dinitrogen complex 2, possibly "[OsL2(N2)(solv)]" (solv=H2O or THF), which reacted with RCN, R'NC, and SO2 to give trans-[OsL2(RCN)2] (R=Ph (3), 4-tolyl (4), 4-t-BuC6H4 (5)), trans-[OsL2(R'NC)2] (R'=2,6-Me2C6H3 (xyl) (6), t-Bu (7)), and [Os(L)2(SO2)(H2O)] (8) complexes, respectively. Protonation of compounds 2, 3, and 6 with HBF4 led to formation of dicationic trans-[Os(LH)2(N2)(H2O)][BF4]2 (9), trans-[Os(LH)2(PhCN)2][BF4]2 (10), and trans-[Os(LH)2(xylNC)2][BF4]2 (11), respectively. Treatment of 1 with phenylhydrazine and SnCl2 afforded trans-[OsL2(N2Ph)2] (12) and trans-[OsL2Cl2] (13), respectively. Air oxidation of compound 2 in hexane/MeOH gave the dimethoxy complex trans-[OsL2(OMe)2] (14), which in CH2Cl2 solution was readily air oxidized to 1. Compound 1 is capable of catalyzing aerobic oxidation of PPh3, possibly via an Os(IV) intermediate. The formal potentials for the Os-L complexes have been determined by cyclic voltammetry. The solid-state structures of compounds 4, 6, cis-8, 13, and 14 have been established by X-ray crystallography.     

Synthesis, spectral and thermal studies of some organotin(IV) derivatives of 5-amino-3H-1,3,4-thiadiazole-2-thione

Some tri- and diorganotin(IV) compounds of the general formula, RnSnL4-n (where n=2, R=Me, n-Bu and Ph; n=3, R=Me, n-Bu, n-Pr and Ph; HL=5-amino-3H-1,3,4-thiadiazole-2-thione) have been synthesized by the reaction of RnSnCl4-n (where n=2 or 3, R=Me, n-Bu, n-Pr and Ph) and the sodium salt of the ligand. Oct2SnL2 was obtained by the reaction of Oct2SnO with HL in a 1:2 molar ratio under azeotropic removal of water. The bonding and coordination behavior in these derivatives are discussed on the basis of IR, Far-IR, multinuclear (1H, 13C and 119Sn) NMR and 119Sn M?ssbauer spectroscopic studies. These investigations suggest that in all the compounds the ligand acts as monoanionic bidentate coordinating through ring N(3) and exocyclic S. Thermal studies of five compounds, viz., Ph3SnL, Me2SnL2, n-Bu2SnL2, Oct2SnL2 and Ph2SnL2 have been carried out in the temperature range 25-1000 degrees C using TG, DTG and DTA techniques under an atmosphere of dry nitrogen.     

四中位（邻烷基）苯基卟啉及其高铁络合物的合成及光谱性质

合成了６种不同大小的烷基取代的四中位（邻烷基）苯基卟啉Ｔ＿（Ｏ－Ｒ）ＰＰＨ＿２及其高铁络合物Ｔ＿（Ｏ－Ｒ）ＰＰＦｅＣｌ（Ｒ＝ＣＨ＿３，Ｃ＿２Ｈ＿５，ｎ－Ｃ＿３Ｈ＿７，ｉ－Ｃ＿３Ｈ＿７，ｎ－Ｂｕ，ｔ－Ｂｕ），除Ｒ＝ＣＨ＿３外，其它５种是文献未曾报道过的新化合物。测定了它们的核磁共振谱、红外及电子光谱，并讨论了它们的结构与光谱性质的关系．     

Titanium(II) and titanium(III) tetrahydroborates. Crystal structures of [Li(Et2O)2][Ti2(BH4)5(PMe2Ph)4], Ti(BH4)3(PMe2Ph)2, and Ti(BH4)3(PEt3)2

The molecular structures of the titanium(III) borohydride complexes Ti(BH4)3(PEt3)2 and Ti(BH4)3(PMe2Ph)2 have been determined. If the BH4 groups are considered to occupy one coordination site, both complexes adopt distorted trigonal bipyramidal structures with the phosphines in the axial sites; the P-Ti-P angles deviate significantly from linearity and are near 156 degrees. In both compounds, two of the three BH4 groups are bidentate and one is tridentate. The deduced structures differ from the one previously described for the PMe3 analogue Ti(BH4)3(PMe3)2, in which two of the tetrahydroborate groups were thought to be bound to the metal in an unusual "side-on" (eta(2)-B,H) fashion. Because the PMe3, PEt3, and PMe2Ph complexes have nearly identical IR spectra, they most likely have similar structures. The current evidence strongly suggests that the earlier crystal structure of Ti(BH4)3(PMe3)2 was incorrectly interpreted and that these complexes all adopt structures in which two of the BH4 groups are bidentate and one is tridentate. The synthesis of the titanium(III) complex Ti(BH4)3(PMe2Ph)2 affords small amounts of a second product: the titanium(II) complex [Li(Et2O)2][Ti2(BH4)5(PMe2Ph)4]. The [Ti2(BH4)5(PMe2Ph)4]- anion consists of two Ti(eta(2)-BH4)2(PMe2Ph)2 centers linked by a bridging eta(2),eta(2)-BH4 group that forms a Ti...(mu-B)...Ti angle of 169.9(3) degrees. Unlike the distorted trigonal bipyramidal geometries seen for the titanium(III) complexes, the metal centers in this titanium(II) species each adopt nearly ideal tbp geometries with P-Ti-P angles of 172-176 degrees. All three BH4 groups around each Ti atom are bidentate. One of the BH4 groups on each Ti center bridges between Ti and an ether-coordinated Li cation, again in an eta(2),eta(2) fashion. The relationships between the electronic structures and the molecular structures of all these titanium complexes are briefly discussed.