Time-resolved infrared spectroscopic study of reactive acyl intermediates relevant to cobalt-catalyzed carbonylations

Time-resolved infrared spectroscopic studies have been used to characterize the reactive intermediate CH3C(O)Co(CO)2PPh3 (ICo), which is relevant to the mechanism of the catalysis of alkene hydroformylation by the phosphine-modified cobalt carbonyls. Step-scan FTIR and (variable) single-frequency time-resolved infrared detection on the microsecond time scale were used to record the spectrum of ICo and to demonstrate that the principal photoproduct of the subsequent reaction of this species at PCO = 1 atm is the methyl cobalt complex CH3Co(CO)3PPh3 (MCo). At higher PCO the trapping of ICo with CO to re-form CH3C(O)Co(CO)3PPh3 (ACo) (rate = kCO[CO][ICo]) was shown to become competitive with the rate of acetyl-to-cobalt methyl migration to give MCo (rate = kM[ICo]). Activation parameters for the competing pathways in benzene were determined to be delta H++CO = 57 +/- 04 kJ mol-1, delta S++CO = -91 +/- 12 J mol-1 K-1 and delta H++M = 40 +/- 2 kJ mol-1, delta S++M = -19 +/- 5 J mol-1 K-1. The effects of varying the solvent on the competitive reactions of ICo were also explored, and the mechanistic implications of these results are discussed.     

Hydrolysis, hydrosulfidolysis, and aminolysis of imido(methyl)rhenium complexes

The tris(imido)methylrhenium complex CH3Re(NAd)3 (1a, Ad = 1-adamantyl) reacts with H2O to give CH3Re(NAd)2O (2a) and AdNH2. The resulting di(imido)oxo species can further react with another molecule of H2O to generate CH3Re(NAd)O2 (3a). The kinetics of these reactions have been studied by means of 1H NMR and UV-vis spectroscopies. The second-order rate constant for the reaction of 1a with H2O at 298 K in C6H6 is 3.3 L mol-1 s-1, which is much larger than the value 1 x 10(-4) L mol-1 s-1 obtained for the reaction between CH3Re(NAr)3 (1b, Ar = 2,6-diisopropylphenyl) and H2O in CH3CN at 313 K. Both 1a and 1b react with H2S to produce the rhenium(VII) sulfide, (CH3Re(NR)2)2(mu-S)2 (4a, R = Ad; 4b, R = Ar), with second-order rate constants of 17 and 1.6 x 10(-4) L mol-1 s-1 in C6H6 and CH3CN, respectively. Complex 4b has been structurally characterized. The crystal data are as follows: space group C2/c, a = 30.4831 (19) A, b = 10.9766 (7) A, c = 18.1645 (11) A, beta = 108.268(1) degrees, V = 5771.5 (6) A3, Z = 4. The reaction between CH3Re(NAr)2O (2b) and H2S also yields the dinuclear compound 4b. Unlike 1b, 1a reacts with aniline derivatives to give mixed imido rhenium complexes.     

Aggregation and C-N rotation of the lithium salt of N,N-dimethyldiphenylacetamide

[formula: see text] Two methyl 1H NMR signals for the Li salt of N,N-dimethyldiphenylacetamide are observed at low temperature and assigned to the monomer and dimer. From line shape analysis, the dimerization constant (K1,2) is 40 +/- 10 M-1 at 200 K (delta G degree = 1.5 kcal mol-1, delta H degree = 0.8 kcal mol-1, delta S degree = 12 eu) and the activation parameters are delta H++ = 5.5 kcal mol-1 and delta S++ = -18 eu. The C-N bond rotation is too fast to observe on the NMR time scale, indicating a rotation barrier of less than 10 kcal mol-1.     

Pressure dependence of peroxynitrite reactions. Support for a radical mechanism

Activation volumes (delta V++) have been determined for several reactions of peroxynitrite using the stopped-flow technique. Spontaneous decomposition of ONOOH to NO3- in 0.15 M phosphate, pH 4.5, gave delta V++ = 6.0 +/- 0.7 and 14 +/- 1.0 cm3 mol-1 in the presence of 53 microM and 5 mM nitrite ion, respectively. One-electron oxidations of Mo(CN)8(4-) and Fe(CN)6(4-), which are first order in peroxynitrite and zero order in metal complex, gave delta V++ = 10 +/- 1 and 11 +/- 1 cm3 mol-1, respectively, at pH 7.2. The limiting yields of oxidized metal complex were found to decrease from 61 to 30% of the initially added peroxynitrite for Mo(CN)8(3-) and from 78 to 47% for Fe(CN)6(3-) when the pressure was increased from 0.1 to 140 MPa. The bimolecular reaction between CO2 and ONOO- was determined by monitoring the oxidation of Fe(CN)6(4-) by peroxynitrite in bicarbonate-containing 0.15 M phosphate, pH 7.2, for which delta V++ = -22 +/- 4 cm3 mol-1. The Fe(CN)6(3-) yield decreased by approximately 20% upon increasing the pressure from atmospheric to 80 MPa. Oxidation of Ni(cyclam)2+ by peroxynitrite, which is first order in each reactant, was characterized by delta V++ = -7.1 +/- 2 cm3 mol-1, and the thermal activation parameters delta H++ = 4.2 +/- 0.1 kcal mol-1 and delta S++ = -24 +/- 1 cal mol-1 K-1 in 0.15 M phosphate, pH 7.2. These results are discussed within the context of the radical cage hypothesis for peroxynitrite reactivity.     

Nature of Cp*MoO2+ in water and intramolecular proton-transfer mechanism by stopped-flow kinetics and density functional theory calculations

A stopped-flow study of the Cp*MoO3- protonation at low pH (down to zero) in a mixed H2O-MeOH (80:20) solvent at 25 degrees C allows the simultaneous determination of the first acid dissociation constant of the oxo-dihydroxo complex, [Cp*MoO(OH)2]+ (pKa1 = -0.56), and the rate constant of its isomerization to the more stable dioxo-aqua complex, [Cp*MoO2(H2O)]+ (k-2 = 28 s-1). Variable-temperature (5-25 degrees C) and variable-pressure (10-130 MPa) kinetics studies have yielded the activation parameters for the combined protonation/isomerization process (k-2/Ka1) from Cp*MoO2(OH) to [Cp*MoO2(H2O)]+, viz., DeltaH++= 5.1 +/- 0.1 kcal mol-1, DeltaS++ = -37 +/- 1 cal mol-1 K-1, and DeltaV++ = -9.1 +/- 0.2 cm3 mol-1. Computational analysis of the two isomers, as well as the [Cp*MoO2]+ complex resulting from the dissociation of water, reveals a crucial solvent effect on both the isomerization and the water dissociation energetics. Introducing a solvent model by the conductor-like polarizable continuum model and especially by explicitly inclusion of up to three water molecules in the calculations led to the stabilization of the dioxo-aqua species relative to the oxo-dihydroxo isomer and to the substantial decrease of the energy cost for the water dissociation process. The presence of a water dissociation equilibrium is invoked to account for the unusually low effective acidity (pKa1' = 4.19) of the [Cp*MoO2(H2O)]+ ion. In addition, the computational study reveals the positive role of external water molecules as simultaneous proton donors and acceptors, having the effect of dramatically lowering the isomerization energy barrier.     

Kinetic and computational study of dissociative substitution and phosphine exchange at tetrahedrally distorted cis-Pt(SiMePh2)2(PMe2Ph)2

The substitution kinetics of Me2PhP in cis-Pt(SiMePh2)2(PMe2Ph)2 (1) by the chelating ligand bis(diphenylphosphino)ethane has been followed at 25.0 degrees C in dichloromethane by stopped-flow spectrophotometry. Addition of the leaving ligand causes mass-law retardation compatible with a dissociative process via a three-coordinate transition state or intermediate. Exchange of Me2PhP in 1 has been studied by variable-temperature magnetization transfer 1H NMR in toluene-d8, giving kex326 = 1.76 +/- 0.12 s-1, delta H++ = 117.8 +/- 2.1 kJ mol-1, and delta S++ = 120 +/- 7 J K-1 mol-1. An exchange rate constant independent of the concentrations of free phosphine, a strongly positive delta S++, and nearly equal exchange and ligand dissociation rate constants also support a dissociative process. Density functional theory (DFT) calculations for a dissociative process give an estimate for the Pt-P bond energy of 98 kJ mol-1 for R = R' = Me, which is in reasonable agreement with the experimental activation energy given the differences between the substituents used in the calculation and those employed experimentally. DFT calculations on cis-Pt(PR3)2(SiR'3)2 (R = H, CH3; R' = H, CH3) are consistent with the experimental molecular structure and show that methyl substituents on the Si donors are sufficient to induce the observed tetrahedral twist. The optimized Si-Pt-Si angle in cis-Pt(SiH3)2(PH3)2 is not significantly altered by changing the P-Pt-P angle from its equilibrium value of 104 degrees to 80 degrees or 120 degrees. The origin of the tetrahedral twist is therefore not steric but electronic. The Si-Pt-Si angle is consistently less than 90 degrees, but the Si-Si distance is still too long to support an incipient reductive elimination reaction with its attendant Si-Si bonding interaction. Instead, it appears that four tertiary ligands introduce a steric strain which can be decreased by a twist of two of the ligands out of the plane; this twist is only possible when two strong sigma donors are cis to each other, causing a change in the metal's hybridization.     

气相中开壳型(CH3)2S(O)…HOO红移氢键复合物的结构与性质

在DFT-B3LYP/6-311++G**水平上分别求得(CH3)2S…HOO和(CH3)2O…HOO开壳型氢键复合物势能面上的稳定构型. 频率分析表明, 与单体HOO自由基相比, 复合物中H10-O11键伸缩振动频率发生显著的红移, 红移值分别为424.21和374.22 cm-1. 在MP2/6-311++G**水平计算得到, 含基组重叠误差(BSSE)校正和零点振动能(ZPVE)校正的相互作用能分别为-24.68和-31.01 kJ·mol-1. 自然键轨道(NBO)理论分析表明, 在(CH3)2S…HOO复合物中, 引起H10-O11键变长的因素包括两种电荷转移: (1) LP(S1)1→σ*(H10-O11); (2) LP(S1)2→σ*(H10-O11), 其中LP(S1)2→σ*(H10-O11)占主要作用, 总的结果是使σ*(H10-O11)的自然布居数增加了37.27 me; 在(CH3)2O…HOO中也有相似的电荷转移的超共轭作用. AIM理论分析表明, S1…H10间和O1…H10间都存在键鞍点, ▽2ρ(r)分别为0.06196和0.03745, 说明这种相互作用介于共价键和离子键之间, 偏于静电作用.     

Ozonolysis of vinyl compounds,CH2=CH-X,in aqueous solution--the chemistries of the ensuing formyl compounds and hydroperoxides

Reactions of ozone with some vinyl compounds of the general structure CH2=CH-X were studied in aqueous solution. Rate constants (in brackets, unit: dm3 mol-1 s-1) were determined: acrylonitrile (670), vinyl acetate (1.6 x 10(5)), vinylsulfonic acid (anion, 8.3 x 10(3)), vinyl phenylsulfonate (ca. 200), vinyl diethylphosphonate (3.3 x 10(3)), vinylphosphonic acid (acid, 1 x 10(4); mono-anion, 2.7 x 10(4); di-anion, 1 x 10(5)), vinyl bromide (1 x 10(4)). The main pathway leads to the formation of HOOCH2OH and HC(O)X. As measured by stopped flow with conductometric detection, the latter one may undergo rapid hydrolysis by water, e.g. HC(O)CN (3 s-1). Other HC(O)X hydrolyse much slower, e.g. HC(O)PO3(Et)2 (7 x 10(-3) s-1) and HC(O)P(OH)O2- (too slow to be measured). The OH(-)-induced hydrolyses range from ca. 5 dm3 mol-1 s-1 [HC(O)PO(3)2-] to 3.8 x 10(5) dm3 mol-1 s-1 [HC(O)CN]. HC(O)Br mainly decomposes rapidly (too fast for the determination of the rate) into CO and Br- plus H+, and the competing hydrolysis is of minor importance (3.7%). The slow hydrolysis of HC(O)PO(3)2- at pH 10.2, where HOOCH2OH is rapidly decomposed into CH2O plus H2O2, allows an H2O2-induced decomposition (k = 260 dm3 mol-1 s-1) to take place. Formate and phosphate are the final products.     

Oxidation of sulfoxides by hydrogen peroxide,catalyzed by methyltrioxorhenium(VII)

Dialkyl and diaryl sulfoxides are oxidized to sulfones by hydrogen peroxide using methyltrioxorhenium as the catalyst. The reaction rate is negligible without a catalyst. The kinetics study was performed in CH3CN-H2O (4:1 v/v) at 298 K with [H+] at 0.1 M, conditions which make the equilibration between MTO and its peroxo complexes more rapid than the oxygen-transfer step. The values for the rate constant for the oxygen-transfer step lie in the range 0.1-3 L mol-1 s-1. The rate constants were significantly smaller than for the oxidation of sulfides to sulfoxides. A study of ring-substituted diaryl sulfoxides yielded kinetics results that are consistent with nucleophilic attack of the sulfur atom on the peroxide oxygen group since rho = -0.65. The results cited refer to the reactions of the diperoxo from the catalyst, MeRe(O)(eta 2-O2)2H2O. The monoperoxo complex showed no measurable reactivity toward sulfoxides, in contrast with the situation for nearly every other substrate. That unusual finding suggests a hydrogen-bonded interaction between the substrate and the diperoxorhenium compound which cannot exist with the monoperoxo compound.     

Mechanistic studies on 14-electron ruthenacyclobutanes: degenerate exchange with free ethylene

The phosphonium alkylidene [(NHC)Cl2Ru=CH(PCy3)]+[B(C6F5)4]-, 1, (NHC = N-heterocyclic carbene, Cy = cyclohexyl, C6H11) reacts with 2.2 equiv of ethylene at -50 degrees C to form the 14-electron ruthenacyclobutane (NHC)Cl2Ru(CH2CH2CH2), 2. NMR spectroscopic data indicates that 2 has a C2v symmetric structure with a flat, kite shaped ruthenacyclobutane ring with significant Calpha-Cbeta agostic interactions with the Ru center. Intramolecular exchange of Calpha and Cbeta is fast (14(2) s-1 at 223 K) as measured by EXSY spectroscopy. Intermolecular exchange of Calpha and Cbeta with the methylene groups of free ethylene is much slower and first order in both [Ru] and [H2C=CH2] (4.8(3) x 10-4 M-1 s-1). Activation parameters for this process are DeltaH++ = 13.2(5) kcal mol-1 and DeltaS++ = -15(2) cal mol-1 K-1, also consistent with a rate limiting associative substitution as the key step in this exchange process. On the basis of this observation, mechanisms for the intermolecular exchange process are proposed and the implications for the mechanism of the propagation steps in catalytic olefin metathesis as mediated by Grubbs catalysts are discussed.     

Oxidation of symmetric disulfides with hydrogen peroxide catalyzed by Methyltrioxorhenium(VII)

Organic disulfides with both alkyl and aryl substituents are oxidized by hydrogen peroxide when CH(3)ReO(3) (MTO) is used as a catalyst. The first step of the reaction is complete usually in about an hour, at which point the thiosulfinate, RS(O)SR, can be detected in nearly quantitative yield. The thiosulfinate is then converted, also by MTO-catalyzed oxidation under these conditions, to the thiosulfonate and, over long periods, to sulfonic acids, RSO(3)H. In the absence of excess peroxide, RS(O)SR (R = p-tolyl), underwent disproportionation to RS(O)(2)SR and RSSR. Kinetics studies of the first oxidation reaction established that two peroxorhenium compounds are the active forms of the catalyst, CH(3)ReO(2)(eta(2)-O(2)) (A) and CH(3)ReO(eta(2)-O(2))(2).(OH(2)) (B). Their reactivities are similar; typical rate constants (L mol(-)(1) s(-)(1), 25 degrees C, aqueous acetonitrile) are k(A) = 22, k(B) = 150 (Bu(2)S(2)) and k(A) = 1.4, k(B) = 11 (Tol(2)S(2)). An analysis of the data for (p-XC(6)H(4))(2)S(2) by a plot of log k(B) against the Hammett sigma constant gave rho = -1.89, supporting a mechanism in which the electron-rich sulfur attacks a peroxo oxygen of intermediates A and B.     

The first structural characterization and determination of the isomerization activation parameters of a chiral phosphatitanocene

The activation parameters (delta G++298 = 11.5 (+/- 1.0) kcal mol-1, delta H++ = 16.3 (+/- 3.0) kcal mol-1, delta S++ = 16 (+/- 11) cal mol-1 K-1) have been determined for the rac to meso isomerization of a phosphametallocene, bis(3,4-dimethyl-2-phenylphospholyl)titanium dichloride, 2, which has been structurally characterized.     

Methanesulfonates of high-valent metals: syntheses and structural features of MoO2(CH3SO3)2, UO2(CH3SO3)2, ReO3(CH3SO3), VO(CH3SO3)2, and V2O3(CH3SO3)4 and their thermal decomposition under N2 and O2 atmosphere

Oxide methanesulfonates of Mo, U, Re, and V have been prepared by reaction of MoO(3), UO(2)(CH(3)COO)(2)·2H(2)O, Re(2)O(7)(H(2)O)(2), and V(2)O(5) with CH(3)SO(3)H or mixtures thereof with its anhydride. These compounds are the first examples of solvent-free oxide methanesulfonates of these elements. MoO(2)(CH(3)SO(3))(2) (Pbca, a=1487.05(4), b=752.55(2), c=1549.61(5) pm, V=1.73414(9) nm(3), Z=8) contains [MoO(2)] moieties connected by [CH(3)SO(3)] ions to form layers parallel to (100). UO(2)(CH(3)SO(3))(2) (P2(1)/c, a=1320.4(1), b=1014.41(6), c=1533.7(1) pm, β=112.80(1)°, V=1.8937(3) nm(3), Z=8) consists of linear UO(2)(2+) ions coordinated by five [CH(3)SO(3)] ions, forming a layer structure. VO(CH(3)SO(3))(2) (P2(1)/c, a=1136.5(1), b=869.87(7), c=915.5(1) pm, β=113.66(1)°, V=0.8290(2) nm(3), Z=4) contains [VO] units connected by methanesulfonate anions to form corrugated layers parallel to (100). In ReO(3)(CH(3)SO(3)) (P1, a=574.0(1), b=1279.6(3), c=1641.9(3) pm, α=102.08(2), β=96.11(2), γ=99.04(2)°, V=1.1523(4) nm(3), Z=8) a chain structure exhibiting infinite O-[ReO(2)]-O-[ReO(2)]-O chains is formed. Each [ReO(2)]-O-[ReO(2)] unit is coordinated by two bidentate [CH(3)SO(3)] ions. V(2)O(3)(CH(3)SO(3))(4) (I2/a, a=1645.2(3), b=583.1(1), c=1670.2(3) pm, β=102.58(3), V=1.5637(5) pm(3), Z=4) adopts a chain structure, too, but contains discrete [VO]-O-[VO] moieties, each coordinated by two bidentate [CH(3)SO(3)] ligands. Additional methanesulfonate ions connect the [V(2)O(3)] groups along [001]. Thermal decomposition of the compounds was monitored under N(2) and O(2) atmosphere by thermogravimetric/differential thermal analysis and XRD measurements. Under N(2) the decomposition proceeds with reduction of the metal leading to the oxides MoO(2), U(3)O(7), V(4)O(7), and VO(2); for MoO(2)(CH(3)SO(3))(2), a small amount of MoS(2) is formed. If the thermal decomposition is carried out in a atmosphere of O(2) the oxides MoO(3) and V(2)O(5) are formed.     

Kinetics and mechanism of complex formation of nickel(II) with tetra-N-alkylated cyclam in N,N-dimethylformamide (DMF): comparative study on the reactivity and solvent exchange of the species Ni(DMF)6(2+) and Ni(DMF)5Cl+

13C NMR was used to study the rate of DMF exchange in the nickel(II) cation Ni(DMF)6(2+) and in the monochloro species Ni(DMF)5Cl+ with 13C-labeled DMF in the temperature range of 193-395 K in DMF (DMF = N,N-dimethylformamide). The kinetic parameters for solvent exchange are kex = (3.7 +/- 0.4) x 10(3) s-1, delta H++ = 59.3 +/- 5 kJ mol-1, and delta S++ = +22.3 +/- 14 J mol-1 K-1 for Ni(DMF)6(2+) and kex = (5.3 +/- 1) x 10(5) s-1, delta H++ = 42.4 +/- 4 kJ mol-1, and delta S++ = +6.7 +/- 15 J mol-1 K-1 for Ni(DMF)5Cl+. Multiwavelength stopped-flow spectrophotometry was used to study the kinetics of complex formation of the cation Ni(DMF)6(2+) and of the 100-fold more labile cation Ni(DMF)5Cl+ with TMC (1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) and TEC (1,4,8,11-tetraethyl-1,4,8,11-tetraazacyclotetradecane) in DMF at 298 K and I = 0.6 M (tetra-n-butylammoniumperchlorate). Equilibrium constants K for the addition of the nucleophiles DMF, Cl-, and Br- to the complexes Ni(TMC)2+ and Ni(TEC)2+ were determined by spectrophotometric titration. Formation of the complexes Ni(TMC)2+ and Ni(TEC)2+ was found to occur in two stages. In the initial stage, fast, second-order nickel incorporation with rate constants k1(TMC) = 99 +/- 5 M-1 s-1 and k1 (TEC) = 235 +/- 12 M-1 s-1 leads to the intermediates Ni(TMC)int2+ and Ni(TEC)int2+, which have N4-coordinated nickel. In the second stage, these intermediates rearrange slowly to form the stereochemically most stable configuration. First-order rate constants for the one-step rearrangement of Ni(TMC)int2+ and the two-step rearrangment of Ni(TEC)int2+ are presented. Because of the rapid formation of Ni(DMF)5Cl+, the reactions of Ni(DMF)6(2+) with TMC and TEC are accelerated upon the addition of tetra-n-butylammoniumchloride (TBACl) and lead to the complexes Ni(TMC)Cl+ and Ni(TEC)Cl+, respectively. For initial concentrations such that [TBACl]o/[nickel]o > or = 20, intermediate formation is 230 times (TMC) and 47 times (TEC) faster than in the absence of chloride. The mechanism of complex formation is discussed.     

Ligand substitution behavior of a simple model for coenzyme B12

The ligand substitution reactions of trans-[CoIII(en)2(Me)H2O]2+, a simple model for coenzyme B12, were studied for cyanide and imidazole as entering nucleophiles. It was found that these nucleophiles displace the coordinated water molecule trans to the methyl group and form the six-coordinate complex trans-[Co(en)2(Me)L]. The complex-formation constants for cyanide and imidazole were found to be (8.3 +/- 0.7) x 10(4) and 24.5 +/- 2.2 M-1 at 10 and 12 degrees C, respectively. The second-order rate constants for the substitution of water were found to be (3.3 +/- 0.1) x 10(3) and 198 +/- 13 M-1 s-1 at 25 degrees C for cyanide and imidazole, respectively. From temperature and pressure dependence studies, the activation parameters delta H++, delta S++, and delta V++ for the reaction of trans-[CoIII(en)2(Me)H2O]2+ with cyanide were found to be 50 +/- 4 kJ mol-1, 0 +/- 16 J K-1 mol-1, and +7.0 +/- 0.6 cm3 mol-1, respectively, compared to 53 +/- 2 kJ mol-1, -22 +/- 7 J K-1 mol-1, and +4.7 +/- 0.1 cm3 mol-1 for the reaction with imidazole. On the basis of reported activation volumes, these reactions follow a dissociative mechanism in which the entering nucleophile could be weakly bound in the transition state.     

Kinetics and thermodynamics of the reaction of deoxyhemerythrin with nitric oxide

Deoxyhemerythrin reacts with NO to form a 1:1 adduct shown spectrophotometrically. The kinetics of the formation have been studied directly by stopped-flow measurements at four different temperatures (0.0-23.6 degrees C). The kinetics of the dissociation have been studied, also by stopped-flow techniques, at five different temperatures (4.0-35.1 degrees C) using three different scavengers [Fe(II)(edta)2-, O2 and sperm whale deoxymyoglobin], which gave similar values. For the formation kf = (4.2 +/- 0.2) x 10(6) M-1 s-1, delta Hf not equal = 44.3 +/- 2.3 kJ mol-1, delta Sf not equal to = 30 +/- 8 J mol-1 K-1 and for the dissociation kd = 0.84 +/- 0.02 s-1, delta Hd not equal to 95.6 +/- 2.1 kJ mol-1 delta Sd not equal to = 74 +/- 7 J mol-1 K-1 (25 degrees C, I = 0.2 M and pH 7-8.1). From the kinetic data the thermodynamic data for the formation of HrNO were calculated: Kf = (5.0 +/- 0.3) x 10(6) M-1, delta H = -51.3 +/- 3.1 kJ mol-1 and delta S = -44 +/- 11 J mol-1 K-1 (25 degrees C). The kinetic data suggest that NO occupies the same iron(II) site in deoxyhemerythrin as oxygen does. The equilibrium constant for the formation of Fe(II)(edta)(NO)2- has been redetermined: K1 = (1.45 +/- 0.07) x 10(7) M-1, delta H = -77.5 +/- 1.5 kJ and mol-1 and delta S = -123.5 J mol-1 K-1 (25 degrees C).     

Low-energy paths for the unimolecular decomposition of CH3OH: a G2M/statistical theory study

The potential energy surface (PES) of the CH3OH system has been characterized by ab initio molecular orbital theory calculations at the G2M level of theory. The mechanisms for the decomposition of CH3OH and the related bimolecular reactions, CH3 + OH and 1CH2 + H2O, have been elucidated. The rate constants for these processes have been calculated using variational RRKM theory and compared with available experimental data. The total decomposition rate constants of CH3OH at the high- and low-pressure limits can be represented by k infinity = 1.56 x 10(16) exp(-44,310/T) s-1 and kAr0 = 1.60 x 10(36) T-12.2 exp(-48,140/T) cm3 molecule-1 s-1, respectively, covering the temperature range 1000-3000 K, in reasonable agreement with the experimental values. Our results indicate that the product branching ratios are strongly pressure dependent, with the production of CH3 + OH and 1CH2 + H2O dominant under high (P > 10(3) Torr) and low (P < 1 atm) pressures, respectively. For the bimolecular reaction of CH3 and OH, the total rate constant and the yields of 1CH2 + H2O and H2 + HCOH at lower pressures (P < 5 Torr) could be reasonably accounted for by the theory. For the reaction of 1CH2 with H2O, both the yield of CH3 + OH and the total rate constant could also be satisfactorily predicted theoretically. The production of 3CH2 + H2O by the singlet to triplet surface crossing, predicted to occur at 4.3 kcal mol-1 above the H2C...OH2 van der Waals complex (which lies 82.7 kcal mol-1 above CH3OH), was neglected in our calculations.     

Dodecanuclear manganese(III) phosphonates with cage structures

Treatments of Mn(O(2)CR)(2) (R = Me, Ph) with NBu(4)MnO(4) in CH(3)CN or CH(3)CN/CH(2)Cl(2) in the presence of acetic acid, delta(1)-cyclohexenephosphonic acid (C(6)H(9)PO(3)H(2)), and 2,2'-bipyridine or 1,10-phenanthroline result in three novel dodecamanganese(III) clusters [Mn(12)O(8)(O(2)CMe)(6)(O(3)PC(6)H(9))(7)(bipy)(3)] (1), [Mn(12)O(8)(O(2)CPh)(6)(O(3)PC(6)H(9))(7)(bipy)(3)] (2), and [Mn(12)O(8)(O(2)CPh)(6)(O(3)PC(6)H(9))(7)(phen)(3)] (3). They have a similar Mn(12) core of [Mn(III)(12)(mu(4)-O)(3)(mu(3)-O)(5)(mu-O(3)P)(3)] with a new type of topologic structure. Solid-state dc magnetic susceptibility measurements of complexes 1-3 reveal that dominant antiferromagnetic interactions are propagated between the magnetic centers. The ac magnetic measurements suggest an S = 2 ground state for compounds 1 and 3 and an S = 3 ground state for compound 2.     

Structural effects on interconversion of oxygen-substituted bisketenes and cyclobutenediones

Cyclobutenediones 5 disubstituted with HO (a), MeO (b), EtO (c), i-PrO (d), t-BuO (e), PhO (f), 4-MeOC6H4O (g), 4-O2NC6H4O (h), and 3,4-bridging OCH2CH2O (i) substituents upon laser flash photolysis gave the corresponding bisketenes 6a-i, as detected by their distinctive doublet IR absorptions between 2075 and 2106 and 2116 and 2140 cm-1. The reactivities in ring closure back to the cyclobutenediones were greatest for the group 6b-e, with the highest rate constant of 2.95 x 10(7) s-1 at 25 degrees C for 6e (RO = t-BuO) in isooctane, were less for 6a (RO = OH, k = 2.57 x 10(6) s-1 in CH3CN), while 6f-i were the least reactive, with the lowest rate constant of 3.8 x 10(4) s-1 in CH3CN for 6h (RO = 4-O2NC6H4O). The significantly reduced rate constants for 6f-i are attributed to diminution of the electron-donating ability of oxygen to the cyclobutenediones 5f-h by the ArO substituents compared to alkoxy groups and to angle strain in the bridged product cyclobutenedione 5i. The reactivities of the ArO-substituted bisketenes 6f-h in CH3CN varied by a factor of 50 and gave an excellent correlation of the observed rate constants log k with the sigma p constants of the aryl substituents. Computational studies at the B3LYP/6-31G(d) level of ring-closure barriers are consistent with the measured reactivities. Photolysis of squaric acid (5a) in solution provides a convenient preparation of deltic acid (7).     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.