Ruthenium tris(pyrazolyl)borate diazo complexes: preparation of aryldiazenido, aryldiazene, and hydrazine derivatives

Tris(pyrazolyl)borate aryldiazenido complexes [RuTpLL'(ArN(2))](BF(4))(2) (1-3) [Ar = C(6)H(5), 4-CH(3)C(6)H(4); Tp = hydridotris(pyrazolyl)borate; L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were prepared by allowing dihydrogen [RuTp(eta(2)-H(2))LL'](+) derivatives to react with aryldiazonium cations. Spectroscopic characterization (IR, (15)N NMR) using the (15)N-labeled derivatives strongly supports the presence of a linear [Ru]-NN-Ar aryldiazenido group. Hydrazine complexes [RuTp(RNHNH(2))LL']BPh(4) (4-6) [R = H, CH(3), C(6)H(5), 4-NO(2)C(6)H(4); L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were also prepared by reacting the [RuTp(eta(2)-H(2))LL'](+) cation with an excess of hydrazine. The complexes were characterized spectroscopically (IR and NMR) and by X-ray crystal structure determination of the [RuTp(CH(3)NHNH(2))[P(OEt)(3)](PPh(3))]BPh(4) (4d) derivative. Tris(pyrazolyl)borate aryldiazene complexes [RuTp(ArN=NH)LL']BPh(4) (7-9) (Ar = C(6)H(5), 4-CH(3)C(6)H(4)) were prepared following three different methods: (i). by allowing hydride species RuHTpLL' to react with aryldiazonium cations in CH(2)Cl(2); (ii). by treating aryldiazenido [RuTpLL'(ArN(2))](BF(4))(2) with LiBHEt(3) in CH(2)Cl(2); (iii). by oxidizing arylhydrazine [RuTp(ArNHNH(2))LL']BPh(4) complexes with Pb(OAc)(4) in CH(2)Cl(2) at -30 degrees C. Methyldiazene complexes [RuTp(CH(3)N=NH)LL']BPh(4) were also prepared by the oxidation of the corresponding methylhydrazine [RuTp(CH(3)NHNH(2))LL']BPh(4) with Pb(OAc)(4).     

Preparation and reactivity of penta- and tetracoordinate platinum(II) hydride complexes with P(OEt)3 and PPh(OEt)2 phosphite ligands

The pentacoordinate [PtH{P(OEt)3}4]BF4 (1) hydride complex was prepared by allowing the tetrakis(phosphite) Pt{P(OEt)3}4 to react with HBF4.Et2O at -80 degrees C. Depending on the nature of the acid used, however, the protonation of the related Pt{PPh(OEt)2}4 complex yielded the pentacoordinate [PtH{PPh(OEt)2}4]BF4 (3) or the tetracoordinate [PtH{PPh(OEt)2}3]Y (4) [Y = BF4- (a), CF3SO3- (b), Cl- (c)] derivatives. Neutral PtHClP2 (7,8) [P = P(OEt)3, PPh(OEt)2] hydride complexes were prepared by allowing PtCl2P2 to react with NaBH4 in CH3CN. The tetrakis(phosphite)[Pt{P(OEt)3}4](BF4)2 (2) derivative was also synthesised and then characterised spectroscopically and by an X-ray crystal structure determination. Reactivity with aryldiazonium cations of all the hydrides was investigated and found to proceed only with the PtHClP2 complex to yield the aryldiazene [PtCl(ArN=NH)P2]BF4[P = PPh(OEt)2] derivative. The hydrazine [PtCl(NH2NH2){PPh(OEt)2}2]BPh4 complex was also prepared by allowing PtHClP2 to react first with AgCF3SO3 and then with hydrazine.     

Preparation and reactivity of mixed-ligand iron(II) hydride complexes with phosphites and polypyridyls

Hydride complexes [FeH(N-N)P3]BPh4 (1, 2) [N-N = 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen); P = P(OEt)4, PPh(OEt)2, and PPh2OEt] were prepared by allowing FeCl2(N-N) to react with phosphite in the presence of NaBH4. The hydrides [FeH(bpy)2P]BPh4 (3) [P = P(OEt)3 and PPh(OEt)2] were prepared by reacting the tris(2,2'-bipyridine) [Fe(bpy)3]Cl2.5H2O complex with the appropriate phosphite in the presence of NaBH4. The protonation reaction of 1 and 2 with acid was studied and led to thermally unstable (above -20 degrees C) dihydrogen [Fe(eta2-H2)(N-N)P3]2+ (4, 5) derivatives. The presence of the H2 ligand is indicated by short T(1 min) values (3.1-3.6 ms) and by J(HD) measurements (31.2-32.5 Hz) of the partially deuterated derivatives. Carbonyl [Fe(CO)(bpy)[P(OEt)3]3](BPh4)2 (6) and nitrile [Fe(CH3CN)(N-N)P3](BPh4)2 (7, 8) [N-N = bpy, phen; P = P(OEt)3 and PPh(OEt)2] complexes were prepared by substituting the H2 ligand in the eta2-H2 4, 5 derivatives. Aryldiazene complexes [Fe(ArN=NH)(N-N)P3](BPh4)2 (9, 10, 11) (Ar = C6H5, 4-CH3C6H4) were also obtained by allowing hydride [FeH(N-N)P3]BPh4 derivatives to react with aryldiazonium cations in CH2Cl2 at low temperature.     

Preparations, structures, and electrochemical studies of aryldiazene complexes of rhenium: syntheses of the first heterobinuclear and heterotrinuclear derivatives with bis(diazene) or bis(diazenido) bridging ligands

The mono- and binuclear aryldiazene complexes [Re(C6H5N=NH)(CO)5-nPn]BY4 (1-5) and [(Re(CO)5-nPn)2-(mu-HN=NAr-ArN=NH)](BY4)2 (6-12) [P = P(OEt)3, PPh(OEt)2, PPh2OEt; n = 1-4; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-(2-CH3)C6H3-C6H3(2-CH3), 4,4'-C6H4-CH2-C6H4; Y = F, Ph) were prepared by reacting the hydride species ReH(CO)5-nPn with the appropriate mono- and bis(aryldiazonium) cations. These compounds, as well as other prepared compounds, were characterized spectroscopically (IR; 1H, 31P, 13C, and 15N NMR data), and 1a was also characterized by an X-ray crystal structure determination. [Re(C6H5N=NH)(CO)(P(OEt)3)4]BPh4 (1a) crystallizes in space group P1 with a = 15.380(5) A, b = 13.037(5) A, c = 16.649(5) A, alpha = 90.33(5) degrees, beta = 91.2(1) degrees, gamma = 89.71(9) degrees, and Z = 2. The "diazene-diazonium" complexes [M(CO)3P2(HN=NAr-ArN identical to N)](BF4)2 (13-15, 17) [M = Re, Mn; P = PPh2OEt, PPh2OMe, PPh3; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4] and [Re(CO)4(PPh2OEt)(4,4'-HN=NC6H4-C6H4N identical to N)](BF4)2 (16b) were synthesized by allowing the hydrides MH(CO)3P2 or ReH(CO)4P to react with equimolar amounts of bis(aryldiazonium) cations under appropriate conditions. Reactions of diazene-diazonium complexes 13-17 with the metal hydrides M2H2P'4 and M2'H(CO)5-nP"n afforded the heterobinuclear bis(aryldiazene) derivatives [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2HP'4](BPh4)2 (ReFe, ReRu, ReOs, MnRu, MnOs) and [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2'(CO)5-nP"n](BPh4)2 (ReMn, MnRe) [M1 = Re, Mn; M2 = Fe, Ru, Os; M2' = Mn, Re; P = PPh2OEt, PPh2OMe; P',P" = P(OEt)3, PPh(OEt)2; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4; n = 1, 2]. The heterotrinuclear complexes [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)M(P(OEt)3)4(mu-4,4'-HN=NC6H4- C6H4N=NH)Mn(CO)3(PPh2OEt)2](BPh4)4 (M = Ru, Os) (ReRuMn, ReOsMn) were obtained by reacting the heterobinuclear complexes ReRu and ReOs with the appropriate diazene-diazonium cations. The heterobinuclear complex with a bis(aryldiazenido) bridging ligand [Mn(CO)2(PPh2OEt)2(mu-4,4'-N2C6H4-C6H4N2)Fe(P(OEt)3)4]BPh4 (MnFe) was prepared by deprotonating the bis(aryldiazene) compound [Mn(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)Fe(4- CH3C6H4CN)(P(OEt)3)4](BPh4)3. Finally, the binuclear compound [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N2)Fe(CO)2(P(OPh)3)2](BPh4)2 (ReFe) containing a diazene-diazenido bridging ligand was prepared by reacting [Re(CO)3(PPh2OEt)2(4,4'-HN=NC6H4-C6H4N identical to N)]+ with the FeH2(CO)2(P(OPh)3)2 hydride derivative. The electrochemical reduction of mono- and binuclear aryldiazene complexes of both rhenium (1-12) and the manganese, as well as heterobinuclear ReRu and MnRu complexes, was studied by means of cyclic voltammetry and digital simulation techniques. The electrochemical oxidation of the mono- and binuclear aryldiazenido compounds Mn(C6H5N2)(CO)2P2 and (Mn(CO)2P2)2(mu-4,4'-N2C6H4-C6H4N2) (P = PPh2OEt) was also examined. Electrochemical data show that, for binuclear compounds, the diazene bridging unit allows delocalization of electrons between the two different redox centers of the same molecule, whereas the two metal centers behave independently in the presence of the diazenido bridging unit.     

Preparation of benzyl azide complexes of iridium(III)

Hydride complexes IrHCl(2)(PiPr(3))P(2) (1) and IrHCl(2)P(3) (2) [P = P(OEt)(3) and PPh(OEt)(2)] were prepared by allowing IrHCl(2)(PiPr(3))(2) to react with phosphite in refluxing benzene or toluene. Treatment of IrHCl(2)P(3), first with HBF(4).Et(2)O and then with an excess of ArCH(2)N(3), afforded benzyl azide complexes [IrCl(2)(eta(1)-N(3)CH(2)Ar)P(3)]BPh(4) (3, 4) [Ar = C(6)H(5), 4-CH(3)C(6)H(4); P = P(OEt)(3), PPh(OEt)(2)]. Azide complexes reacted in CH(2)Cl(2) solution, leading to the imine derivative [IrCl(2){eta(1)-NH=C(H)C(6)H(5)}P(3)]BPh(4) (5). The complexes were characterized by spectroscopy and X-ray crystal structure determination of [IrCl(2)(eta(1)-N(3)CH(2)C(6)H(5)){P(OEt)(3)}(3)]BPh(4) (3a) and [IrCl(2){eta(1)-NH=C(H)C(6)H(5)}{P(OEt)(3)}(3)]BPh(4) (5a). Both solid-state structure and (15)N NMR data indicate that the azide is coordinated through the substituted Ngamma [Ir]-Ngamma(CH(2)Ar)NNalpha nitrogen atom.     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.     

Chemistry of [Et4N][MoIV(SPh)(PPh3)(mnt)2] as an analogue of dissimilatory nitrate reductase with its inactivation on substitution of thiolate by chloride

Structural-functional analogue of the reduced site of dissimilatory nitrate reductase is synthesized as [Et4N][MoIV(SPh)(PPh3)(mnt)2].CH2Cl2 (1). PPh3 in 1 is readily dissociated in solution to generate the active site of the reduced site of dissimilatory nitrate reductase. This readily reacts with nitrate. The nitrate reducing system is characterized by substrate saturation kinetics. Oxotransfer to and from substrate has been coupled to produce a catalytic system, NO3- + PPh3 --> NO2- + OPPh3, where NO3- is the substrate for dissimilatory nitrate reductase. The corresponding chloro complex, [Et4N][MoIV(Cl)(PPh3)(mnt)2].CH2Cl2 (2), responds to similar PPh3 dissociation but is unable to react with nitrate, showing the indispensable role of thiolate coordination for such oxotransfer reaction. This investigation provides the initial demonstration of the ligand specificity in a model system similar to single point mutation involving site directed mutagenesis in this class of molybdoenzymes.     

Preparation and reactivity of mixed-ligand ruthenium(II) hydride complexes with phosphites and polypyridyls

Chloro complexes [RuCl(N-N)P3]BPh4 (1-3) [N-N = 2,2'-bipyridine, bpy; 1,10-phenanthroline, phen; 5,5'-dimethyl-2,2'-bipyridine, 5,5'-Me2bpy; P = P(OEt)3, PPh(OEt)2 and PPh2OEt] were prepared by allowing the [RuCl4(N-N)].H2O compounds to react with an excess of phosphite in ethanol. The bis(bipyridine) [RuCl(bpy)2[P(OEt)3]]BPh4 (7) complex was also prepared by reacting RuCl2(bpy)2.2H2O with phosphite and ethanol. Treatment of the chloro complexes 1-3 and 7 with NaBH4 yielded the hydride [RuH(N-N)P3]BPh4 (4-6) and [RuH(bpy)2P]BPh4 (8) derivatives, which were characterized spectroscopically and by the X-ray crystal structure determination of [RuH(bpy)[P(OEt)3]3]BPh4 (4a). Protonation reaction of the new hydrides with Br?nsted acid was studied and led to dicationic [Ru(eta2-H2)(N-N)P3]2+ (9, 10) and [Ru(eta(2-H2)(bpy)2P]2+ (11) dihydrogen derivatives. The presence of the eta2-H2 ligand was indicated by a short T(1 min) value and by the measurements of the J(HD) in the [Ru](eta2-HD) isotopomers. From T(1 min) and J(HD) values the H-H distances of the dihydrogen complexes were also calculated. A series of ruthenium complexes, [RuL(N-N)P3](BPh4)2 and [RuL(bpy)2P](BPh4)2 (P = P(OEt)3; L = H2O, CO, 4-CH3C6H4NC, CH3CN, 4-CH3C6H4CN, PPh(OEt)2], was prepared by substituting the labile eta2-H2 ligand in the 9, 10, 11 derivatives. The reactions of the new hydrides 4-6 and 8 with both mono- and bis(aryldiazonium) cations were studied and led to aryldiazene [Ru(C6H5N=NH)(N-N)P3](BPh4)2 (19, 21), [[Ru(N-N)P3]2(mu-4,4'-NH=NC6H4-C6H4N=NH)](BPh4)4 (20), and [Ru(C6H5N=NH)(bpy)2P](BPh4)2 (22) derivatives. Also the heteroallenes CO2 and CS2 reacted with [RuH(bpy)2P]BPh4, yielding the formato [Ru[eta1-OC(H)=O](bpy)2P]BPh4 and dithioformato [Ru[eta1-SC(H)=S](bpy)2P]BPh4 derivatives.     

Stable diplatinum complexes with functional thiolato bridges from dialkylation of [Pt2(mu-S)2(P-P)2] [P-P=2 x PPh3, Ph2P(CH2)3PPh2

The normally robust monoalkylated complexes [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) can be activated towards further alkylation. Dialkylated complexes [Pt(2)(mu-SR)(2)(P-P)(2)](2+) (P-P=2 x PPh(3), Ph(2)P(CH(2))(3)PPh(2)) can be stabilized and isolated by the use of electron-rich and aromatic halogenated substituents R [e.g. 3-(2-bromoethyl)indole and 2-bromo-4'-phenylacetophenone] and 1,3-bis(diphenylphosphino)propane [Ph(2)P(CH(2))(3)PPh(2) or dppp] which enhances the nucleophilicity of the {Pt(2)(mu-S)(2)} core. This strategy led to the activation of [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) towards R-X as well as isolation and crystallographic elucidation of [Pt(2)(mu-SC(10)H(10)N)(2)(PPh(3))(4)](PF(6))(2) (2a), [Pt(2)(mu-SCH(2)C(O)C(6)H(4)C(6)H(5))(2)(PPh(3))(4)](PF(6))(2) (2b), and a range of functionalized-thiolato bridged complexes such as [Pt(2)(mu-SR)(2)(dppp)(2)](PF(6))(2) [R= -CH(2)C(6)H(5) (8a), -CH(2)CHCH(2) (8b) and -CH(2)CN (8c)]. The stepwise alkylation process is conveniently monitored by Electrospray Ionisation Mass Spectrometry, allowing for a direct qualitative comparison of the nucleophilicity of [Pt(2)(mu-S)(2)(P-P)(2)], thereby guiding the bench-top synthesis of some products observed spectroscopically.     

Reactivity of the heterometallic clusters [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides, including selenium transfer. Crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)], [MCo2(mu3-Se)(CO)7(mu-dppy)], and [RuCo2(mu3-Se)(CO)7(mu-dppm)] [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2

The reactivity of [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides such as Ph3PSe, Ph2P(Se)CH2PPh2, Ph2(2-C5H4N)PSe, Ph2(2-C4H3S)PSe, and Ph2[(2-C5H4N)(2-C4H2S)]PSe has been studied with the aim to obtain new selenido-carbonyl bimetallic clusters. The reactions of the hydrido clusters give two main classes of products: (i) triangular clusters with a mu3-Se capping ligand of the type [MCo2(mu3-Se)(CO)(9-x)L(y)] resulting from the selenium transfer (x = y = 1, 2, with L = monodentate ligand; x = 2, 4, and y = 1, 2, with L = bidentate ligand) (M = Fe, Ru) and (ii) tetranuclear clusters of the type [HMCo3(CO)12xL(y)] obtained by simple substitution of axial, Co-bound carbonyl groups by the deselenized phosphine ligand. The crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)] (1), [MCo2(mu3-Se)(CO)7(mu-dppy)] (M = Fe (16) or Ru (2)), and [RuCo2(mu3-Se)(CO)7(mu-dppm)] (12) are reported [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2]. Clusters 2, 12, and 16 are the first examples of trinuclear bimetallic selenido clusters substituted by phosphines. Their core consists of metal triangles capped by a mu3-selenium atom with the bidentate ligand bridging two metals in equatorial positions. The core of cluster 1 consists of a RuCo3 tetrahedron, each Co-Co bond being bridged by a carbonyl group and one further bridged by a dppy ligand. The coordination of dppy in a pseudoaxial position causes the migration of the hydride ligand to the Ru(mu-H)Co edge. In contrast to the reactions of the hydrido clusters, those with the anionic clusters [MCo3(CO)12]- do not lead to Se transfer from phosphorus to the cluster but only to CO substitution by the deselenized phosphine.     

Novel ruthenium(ii) complexes containing the N-phosphorylated iminophosphorane-phosphine ligand Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2): a new coordination mode of its methanide anion

The reactivity of complex [Ru(eta(6)-p-cymene)(kappa(3)P,N,O-Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][SbF(6)](2) towards a variety of mono- and bidentate neutral ligands has been studied, allowing the high-yield synthesis of the novel half-sandwich Ru(ii) derivatives [Ru(eta(6)-p-cymene)(L)(kappa(2)P,O-Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][SbF(6)](2) (L = N[triple bond, length as m-dash]CMe , N[triple bond, length as m-dash]CEt , PMe(3), PMe(2)Ph , PMePh(2), PPh(3), P(OMe)(3), P(OEt)(3), P(OPh)(3), py , kappa(1)P-dppm , kappa(1)P-dppe ), as well as the octahedral species [Ru(Ninsertion markN)(2)(kappa(2)P,O-Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][SbF(6)](2) (Ninsertion markN = bipy , phen ). Deprotonation of complexes ,, upon treatment with an excess of NaOH in CH(2)Cl(2), generates the monocationic derivatives [Ru(Ninsertion markN)(2)(kappa(2)P,N-Ph(2)PC(H)[double bond, length as m-dash]P{NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][Cl] (Ninsertion markN = bipy , phen ) in which the methanide anion adopts an unprecedented kappa(2)P,N bidentate coordination mode. The structures of compounds , and have been determined by single-crystal X-ray diffraction methods.     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

Reactions of manganese and rhenium complexes with organic azides: preparation of tetraazabutadiene derivatives

Azide complexes [M(RN(3))(CO)(3)P(2)]BPh(4)[M = Mn, Re; R = C(6)H(5)CH(2), 4-CH(3)C(6)H(4)CH(2), C(6)H(5), 4-CH(3)C(6)H(4), C(5)H(9); P = PPh(OEt)(2), PPh(2)(OEt)] were prepared by allowing tricarbonyl MH(CO)(3)P(2) hydride complexes to react first with Br?nsted acid (HBF(4), CF(3)SO(3)H) and then with organic azide in the dark. In sunlight the reaction yielded tetraazabutadiene [M(eta(2)-1,4-R(2)N(4))(CO)(2)P(2)]BPh(4) complexes or, with benzyl azide, imine [M{eta(1)-NH[double bond, length as m-dash]C(H)Ar}(CO)(3)P(2)]BPh(4)(Ar = C(6)H(5), 4-CH(3)C(6)H(4)) derivatives. Tetraazabutadiene [M(eta(2)-1,4-R(2)N(4))(CO)(2)P(2)]BPh(4) complexes were also prepared by reacting dicarbonyl MH(CO)(2)P(3) species first with Br?nsted acid and then with an excess of organic azide. Complexes were characterised spectroscopically (IR, (1)H, (31)P, (13)C, (15)N NMR data) and by the X-ray crystal structure determination of complex [Re{eta(2)-1,4-(C(6)H(5)CH(2))(2)N(4)}(CO)(2){PPh(OEt)(2)}(2)]BPh(4)(). Strong evidence for coordination of the organic azide was obtained from the (15)N NMR spectra of labelled [M(C(6)H(5)CH(2)(15)NN(15)N)(CO)(3)P(2)]BPh(4) derivatives.     

Ni(eta 3-CH2C(CH3)CH2)(SbPh3)3][BAr'4]: an extremely active cationic allyl nickel-stibine catalyst for the oligomerization of styrene

The pseudotetrahedral, formally 5-coordinate complex [Ni(eta 3-CH2C(CH3)CH2)(SbPh3)3][BAr'4] (Ar' = 3,5-C6H3(CF3)2) as well as the 4-coordinate derivative [Ni(eta 3-CH2C(CH3)CH2)(AsPh3)2][BAr'4] act as extremely efficient catalysts for the oligomerization of styrene.     

The OsO4F-, OsO4F2(2)-, and OsO3F3- anions, their study by vibrational and NMR spectroscopy and density functional theory calculations, and the X-ray crystal structures of [N(CH3)4][OsO4F] and [N(CH3)4][OsO3F3

The fluoride ion acceptor properties of OsO4 and OsO3F2 were investigated. The salts [N(CH3)4][OsO4F] and [N(CH3)4]2[OsO4F2] were prepared by the reactions of OsO4 with stoichiometric amounts of [N(CH3)4][F] in CH3CN solvent. The salts [N(CH3)4][OsO3F3] and [NO][OsO3F3] were prepared by the reactions of OsO3F2 with a stoichiometric amount of [N(CH3)4][F] in CH3CN solvent and with excess NOF, respectively. The OsO4F- anion was fully structurally characterized in the solid state by vibrational spectroscopy and by a single-crystal X-ray diffraction study of [N(CH3)4][OsO4F]: Abm2, a = 7.017(1) A, b = 11.401(2) A, c = 10.925(2) A, V = 874.1(3) A3, Z = 4, and R = 0.0282 at -50 degrees C. The cis-OsO4F2(2-) anion was characterized in the solid state by vibrational spectroscopy, and previous claims regarding the cis-OsO4F2(2-) anion are shown to be erroneous. The fac-OsO3F3- anion was fully structurally characterized in CH3CN solution by 19F NMR spectroscopy and in the solid state by vibrational spectroscopy of its N(CH3)4+ and NO+ salts and by a single-crystal X-ray diffraction study of [N(CH3)4][OsO3F3]: C2/c, a = 16.347(4) A, b = 13.475(3) A, c = 11.436(3) A, beta = 134.128(4) degrees, V = 1808.1(7) A3, Z = 8, and R = 0.0614 at -117 degrees C. The geometrical parameters and vibrational frequencies of OsO4F-, cis-OsO4F2(2-), monomeric OsO3F2, and fac-OsO3F3- and the fluoride affinities of OsO4 and monomeric OsO3F2 were calculated using density functional theory methods.     

Synthesis, structures and reactions of lithium complexes of [(o-RCHC6H4)PPh2=NSiMe3]-(R = H, SiMe3) ligands

N-Trimethylsilyl o-methylphenyldiphenylphosphinimine, (o-MeC6H4)PPh2=NSiMe3 (1), was prepared by reaction of Ph2P(Br)=NSiMe3 with o-methylphenyllithium. Treatment of 1 with LiBun and then Me3SiCl afforded (o-Me3SiCH2C6H4)PPh2=NSiMe3 (2). Lithiations of both 1 and 2 with LiBu(n) in the presence of tmen gave crystalline lithium complexes [Li{CH(R)C6H4(PPh(2=NSiMe3)-.tmen](3, R = H; 4, R = SiMe3). From the mother liquor of 4, traces of the tmen-bridged complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}]2(mu-tmen) (5) were obtained. Reaction of 2 with LiBun in Et2O yielded complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}.OEt2] (6). Reaction of lithiated with Me2SiCl2 in a 2:1 molar ratio afforded dimethylsilyl-bridged compound Me2Si[CH2C6H4(PPh2=NSiMe3)-2]2 (7). Lithiation of 7 with two equivalents of LiBun in Et2O yielded [Li2{(CHC6H4(PPh2=NSiMe3)-2)2SiMe2}.0.5OEt2](8.0.5OEt2). Treatment of 4 with PhCN formed a lithium enamide complex [Li{N(SiMe3)C(Ph)CHC6H4(PPh2=NSiMe3)-2}.tmen] (9). Reaction of two equivalents of 5 with 1,4-dicyanobenzene gave a dilithium complex [{Li(OEt2)2}2(1,4-{C(N(SiMe3)CHC6H4(PPh2=NSiMe3)-2}2C6H4)] (10). All compounds were characterised by NMR spectroscopy and elemental analyses. The structures of compounds 2, 3, 5, 6 and 9 have been determined by single crystal X-ray diffraction techniques.     

upper bond 1 start]PdCl[PPh(2)CH(2)CH(2)C[upper bond 1 end]HCH(2)CH(2)PPh(2)] as a precursor to homo- and hetero-metallic species directed by ESMS (electrospray ionisation mass spectrometry)

The cyclometallated Pd compound [upper bond 1 start]PdCl[PPh(2)CH(2)CH(2)C[upper bond 1 end]HCH(2)CH(2)PPh(2)], obtained from PdCl(2)(Ph(2)P(CH(2))(5)PPh(2)) in refluxing DMF (N,N-dimethylformamide), was characterized by NMR and X-ray single-crystal diffraction analysis. The cyclometallation of MCl(2)(Ph(2)P(CH(2))(5)PPh(2))(M = Pd, Pt) to give and its Pt(ii) analogue was probed using electrospray ionisation mass spectrometry (ESMS). The reactivity of towards neutral ligands such as phosphines and pyridines as well as basic metal complexes such as pyridine-thiolate compounds of Au(i), Hg(ii) and Pt(ii) in solution was also investigated. The results showed that the chloride trans to the Pd-C bond is susceptible to ligand replacement. A number of entry metalloligands was examined in an attempt to establish a route to cyclometallated aggregates and clusters.     

Tautomerization of methyldiazene to formaldehyde-hydrazone in ruthenium and osmium complexes

Mixed-ligand hydrazine complexes [M(CO)(RNHNH2)P4](BPh4)2 (1, 2) [M = Ru, Os; R = H, CH3, C6H5; P = P(OEt)3] with carbonyl and triethyl phosphite were prepared by allowing hydride [MH(CO)P4]BPh4 species to react first with HBF4.Et2O and then with hydrazines. Depending on the nature of the hydrazine ligand, the oxidation of [M(CO)(RNHNH2)P4](BPh4)2 derivatives with Pb(OAc)4 at -30 C gives acetate [M(kappa1-OCOCH3)(CO)P4]BPh4 (3a), phenyldiazene [M(CO)(C6H5N=NH)P4](BPh4)2 (3c, 4c), and methyldiazene [M(CO)(CH3N=NH)P4](BPh4)2 (3b, 4b) derivatives. Methyldiazene complexes 3b and 4b undergo base-catalyzed tautomerization of the CH3N=NH ligand to formaldehyde-hydrazone NH2N=CH2, giving the [M(CO)(NH2N=CH2)P4](BPh4)2 (5, 6) derivatives. Complexes 5 and 6 were characterized spectroscopically and by the X-ray crystal structure determination of the [Ru(CO)(NH2N=CH2)[P(OEt)3]4](BPh4)2 (5) derivative. Acetone-hydrazone [M(CO)[NH2N=C(CH3)2]P4](BPh4)2 (7, 8) complexes were also prepared by allowing hydrazine [M(CO)(NH2NH2)P4](BPh4)2 derivatives to react with acetone.     

A Novel Composite Based On Phosphotungstate Anion[n-Bu4N][Cu(2,2-bipy)3][PW12O40]·CH3CN·H2O

A novel composite, [C16H36N][Cu(2,2-bipy)3][PW12O40]·CH3CN·H2O based on Keggin-type phosphotungstate, has been synthesized in acetonitrile at moderate temperature and then characterized by IR and single-crystal X-ray structural analysis. The crystal is of monoelinie system, space group P21/n with a = 20.489(4), b = 17.249(3), c = 23.723(4) A,β = 95.114(2)°, V =8350(3) A3, Mr= 3710.79, Z = 4,Dc= 2.952 g/cm3,F(000) = 6676,μ = 16.808 mm-1, the final R= 0.0551 and wR = 0.1269 for 9460 observed reflections with Ⅰ 20(Ⅰ). Interestingly, it is found that the structure unit contains two different cations of [C16H36N] and [Cu(2,2-bipy)3]2 .     

Chiral supramolecules: organometallic molecular loops made from enantiopure R-[cis-Rh2(C6H4PPh2)2(CH3CN)6](BF4)2

Two enantiopure molecular loops, RR-[cis-Rh2(C6H4PPh2)2(py)2O2C(CF2)(n)CO2]2 (1, n = 2 and 2, n = 3) have been made from the reaction in CH2Cl2 and CH3OH of the inherently chiral dirhodium compound, R-[cis-Rh2(C6H4PPh2)2(CH3CN)6](BF4)2, and HO2C(CF2)(n)CO2H in the presence of an excess of pyridine. Single-crystal structure analyses reveal that each of these compounds is composed of two R-cis-Rh2(C6H4PPh2)2(ax-py)2(2+) units, and two equatorial perfluorodicarboxylate linkers, which form a loop oligomer. The 1H, 19F, and 31P[1H] NMR spectra in CDCl3 and C5D5N indicate that only one type of highly symmetric species exists in each solution, which is consistent with the solid-state structures.