Generation and amplification of dual-color femtosecond pulses by a noncollinear optical parametric up-conversion process

Noncollinear optical parametric up-conversion generation and amplification are realized in a thick β-barium borate (BBO) crystal, and a couple of visible femtosecond up-conversion laser pulses can be achieved by a femtosecond pulse at 800 nm as the pump sources. The theoretical and experimental results indicate that there exist phase-matching conditions for dual-color noncollinear parametric up-conversion generation and amplification, and their wavelengths can be tuned by rotating the BBO crystal. This parametric up-conversion generation and amplification can be attributed to three and five-wave mixing in a thick BBO crystal, and it shows the potential application on optical parametric chirped pulse amplification (OPCPA) to generate multi-color ultraviolet or visible femtosecond laser pulses pumped directly by femtosecond fundamental laser pulses without frequency-doubling or tripling.     

All-fiber incoherent frequency-to-time mapping method for microwave signal generation with baseband transmission and multicasting support

We present a proof-of-principle experiment for achieving simultaneous distribution of baseband radio-frequency data and up-conversion with broadcasting support over a passive optical network. The technique is based on an incoherent frequency-to-time mapping method for pulse shaping. Specifically, we synthesize the spectral density function of sliced ASE noise from an EDFA with a periodic Mach–Zehnder fiber interferometer optical filter. By using external intensity modulation combined with propagation in an optical fiber, after photodetection, the resultant averaged temporal pulse profile resembles the shape of the incoherent source. The photodetected signal contains both the baseband data and an up-frequency converted copy with central wavelength for the microwave carrier into the ultra-wideband range and tuning capability by selection of the fiber length.     

Optical Vector Network Analyzer with an Improved Dynamic Range Based on a Polarization Multiplexing Electro-Optic Modulator

We present a new method to achieve an optical vector network analyzer(OVNA) based on a polarization multiplexing electro-optic modulator(PM-EOM) without an optical bandpass filter. Optical single sideband(OSSB)modulated signals with a tunable optical carrier-sideband ratio(OCSR) are obtained at the output of the PMEOM. The OCSR can be flexibly tuned by controlling bias voltages of the PM-EOM. The dynamic range of the OVNA is expanded by taking the improvement of the OCSR into account. The transmission response of an optical device under test(ODUT) is measured based on one-to-one mapping from optical domain to electrical domain. By optimizing the OCSR of the OSSB modulated signals, the dynamic range of the OVNA can be effectively improved with 3.7 dB. An analytical model is derived to describe the transfer function of the ODUT.The magnitude and phase responses of a fiber Bragg grating are characterized with a large dynamic range.     

UP-conversion of terahertz radiation induced by photon drag effect

An all-optical approach to convert terahertz radiation (THz, wavelength λ₁) into infrared (IR, peak wavelength λ₂) is presented. We show that this up-conversion process is due to the photon drag effect induced by the THz radiation in intrinsic narrow-gap semiconductors followed by spatial redistribution of current carriers and band-to-band radiative recombination. The process results in non-selective high-speed (ns range rise/fall times) IR imaging of positive (conventional luminescence) and/or negative (negative luminescence) contrasts. Estimates made for an InSb pixelless converter at 300 K and moderate THz intensity (kW/cm²) show that this up-conversion process (with λ₁/λ₂>10²) can be observed with a conventional thermal imaging camera.     

First demonstration of a temporal coherence analysis through a parametric interferometer

We analyze the temporal coherence of an optical infrared radiation in the visible domain by using a Mach-Zehnder interferometer and a wavelength conversion stage in each arm. We exploit a sum frequency generation process in bulk PPLN crystal to convert the infrared radiation at 1.55 μm into 0.63 μm before the interferometric mixing. The applicability of the Wiener-Kintchine theorem through up-conversion processes is here demonstrated by direct comparisons among visible and infrared measurements.     

基于有机吡啶盐晶体的太赫兹频率上转换探测

利用激光泵浦国产有机吡啶盐4-(4-二甲基氨基苯乙烯基)甲基吡啶对甲基苯磺酸盐(4-N,N-dimethylamino-4′-N′-methyl-stilbazolium tosylate,DAST)晶体,通过非线性频率上转换方法实现了室温运转的高灵敏、快响应、宽频段太赫兹探测.高效生成了近红外上转换光,采集到其脉冲包络和光谱,获得了ns量级的时间分辨率,并换算太赫兹波的频率,实现了对太赫兹信息的全面表征.与商用高莱探测器相比,上转换方法在19 THz频点的探测灵敏度高4个数量级;在可探测频率3.15—29.82 THz范围内,响应度普遍高2—3个数量级.结果表明:室温下的光泵频率上转换探测方法在时间分辨率和响应度方面远优于传统的热探测器,极大地提高了差频有源太赫兹系统的动态范围,使差频源在太赫兹波谱分析和成像等领域具有更大的应用潜力.     

Up-conversion detection of mid-infrared light carrying orbital angular momentum

Frequency up-conversion is an effective method of mid-infrared (MIR) detection by converting long-wavelength photons to the visible domain, where efficient detectors are readily available. Here, we generate MIR light carrying orbital angular momentum (OAM) from a difference frequency generation process and perform up-conversion on it via sum frequency conversion in a bulk quasi-phase-matching crystal. The maximum quantum conversion efficiencies from MIR to visible are 34.0%, 10.4%, and 3.5% for light with topological charges of 0, 1, and 2, respectively, achieved by utilizing an optimized strong pump light. We also verify the OAM conservation with a specially designed interferometer, and the results agree well with the numerical simulations. Our study opens up the possibilities for generating, manipulating, and detecting MIR light that carries OAM, and will have great potential for optical communications and remote sensing in the MIR regime.     

Amplification reduction in fiber amplifiers due to up-conversion at Er3 concentrations below 1000 ppm

The parasitic effect of two-ion up-conversion in Er³⁺ -doped fibers have been investigated. Maximum amplification for eight different Er³⁺ concentrations have been measured and it is shown that up-conversion drastically reduces amplification for Er³⁺ concentrations in the range of 140-1680 ppm by weight. We have also measured an up-conversion induced luminescence at 980 nm. By comparison of experimental and simulated characteristics, we obtain an up-conversion coefficient of 10^-22 m³/s.     

布居分支比模型——一种定性分析上转换效率的有效方法

通过对在上转换的过程中起关键作用的是发动上转换的关键亚稳态的动力学因素的分析,建立了在连续激光激发下的定性分析上转换的“布居分支比β”物理模型：即上转换可以由关键亚稳态上的布居再次被激发至更高激发态的分支比β来描述;其特别的物理意义在于这种方法易于从总体上对上转换的性能有全面的定性的掌握.还进一步论证了对于Er³⁺离子步进吸收上转换,石英、五磷酸盐等截止声子能量大于1000cm^-1的材料的上转换发光约为氟化物的万分之一的原因是它们的多声子无辐射弛豫速率W_关键词：     

Three-dimensional dynamic optical manipulation by combining a diffractive optical element and a spatial light modulator

Since the introduction of computer-controlled spatial light modulators (SLMs), holographic optical tweezers have become an important tool for dynamic parallel optical manipulation. In this paper we clarify the usefulness of a new configuration for optical trapping that creates light patterns using the combination of a diffractive optical element (DOE) and an SLM. This configuration not only enables the use of the higher part of the SLM’s diffraction efficiency curve, because a simple hologram can be chosen for the SLM, but also achieves three-dimensional dynamic optical manipulation over a large spatial range. By switching blaze-like holograms displayed on the SLM, we demonstrated simultaneous transportation of three 6-μm-diameter polystyrene beads over a range of 90 μm in the vertical direction and 37.5 μm in the horizontal direction. Compared with the same manipulation executed using only the SLM, the range of this method is extended four-fold in the vertical direction and three-fold in the horizontal direction.     

Novel optical modulator using silicon photonic crystals

We propose a novel compact and integrated optical modulator, which consists of p–i–n silicon photonic crystals with triangular lattice and a line defect waveguide. The device operation is based on a dynamic shift of the photonic band gap (PBG), which induced change in the silicon refractive index by the free carrier injection. We have numerically analyzed and investigated its light modulation performance by using plane wave expansion (PWE) method and finite-difference time-domain method. With small size, rapid response time and high extinct ratio, the designed optical modulator can be used in photonic integrated circuits.     

Optical properties of Er3+-doped strontium barium niobate nanocrystals obtained by thermal treatment in glass

Measurements of the optical properties of Er³⁺ ions in strontium barium niobate glass and glass ceramics have been carried out. The glasses have been fabricated using a melt-quenching method, and the glass ceramic samples have been obtained from the glass precursor by a thermal treatment. The ceramic samples formed by a glassy phase, and a crystalline phase contains nanocrystals of Sr_1?xBa_xNb₂O₆ (SBN) doped with Er³⁺ ions with a mean size of ～50 nm, as confirmed with XRD. Green up-conversion emission has been obtained under excitation at 800 nm, and the temporal evolution of this emission has been reported with the purpose of determining the involved up-conversion mechanism. These optical measures have confirmed that the Er³⁺ ions have been incorporated into the SBN matrix, after a thermal treatment, which produced an increment of the up-conversion efficiency.     

Wide colour gamut generated in triply lanthanide doped sol–gel nano-glass–ceramics

The generation of a wide colour gamut, based on up-conversion of cheap near-infrared photons into the visible range, is of great importance for general lighting appliances and integrated optical devices. Here, we report for the first time on up-conversion luminescence under infrared excitation at 980 nm in Yb³⁺–Er³⁺–Tm³⁺ triply doped sol–gel derived SiO₂–LaF₃ based nano-glass–ceramics (SOL-YET), containing LaF₃ nanocrystals with a size about 13 nm. Efficient simultaneous up-conversion emission of the three primary colours (blue, green and red) gives rise to a balanced white overall emission. The ratio between up-conversion emission bands can be varied by changing pump power intensity resulting in colour tuneable up-conversion phosphor.     

Negative luminescence in semiconductors: a retrospective view

Twenty-five years ago, we introduced the phenomenon of negative luminescence (NL) into semiconductor physics. This paper provides an overview of work conducted to develop this fundamental concept. Initially, we consider the first-principle approach to radiation interaction with basic matter and the major properties of NL. Then we describe the problems of NL direct measurements in homogeneous materials and structures. Finally, we emphasize the use of NL approach in applications involving devices for infrared (IR) wavelength (3–12 μm) high-temperature (300–400 K) optoelectronics. Our subjects will include NL IR emitting diodes, radiative coolers, IR dynamic scene simulators, light up-conversion devices, and the Stealth effect in IR.     

Atomic-vapor-based high efficiency optical detectors with photon number resolution

The ability to detect very weak optical fields with high efficiency (>99%) and to distinguish the number of photons in a given time interval is a very challenging technical problem with enormous potential payoffs in quantum communications and information processing. We propose to employ an atomic vapor as the active medium, prepared in a specific quantum state using laser radiation. The absorption of a photon will be aided by a dressing laser, and the presence or absence of an excited atom will be detected using the "cycling transition" approach perfected for ion traps. By incorporating an appropriate up-conversion scheme, our method can be applied to a wide variety of optical wavelengths.     

Robust and precise length stabilization of a 25-km long optical fiber using an optical interferometric method with a digital phase-frequency discriminator

We have developed an optical fiber length stabilization system for the distribution of reference millimeter wave signals in a long-baseline phased-array radio telescope. The fiber length was compared with an absolute wavelength reference laser using a Michelson interferometer. We used a digital servo system including a digital phase-frequency discriminator with a wide phase dynamic range and a digital signal processor (DSP) for the digital servo system. All-digital servo system made it possible to realize a robust and precise length stabilization of a 25-km long optical fiber. PACS 42.62.Eh; 42.81.Uv; 95.55.Jz     

Single photon frequency up-conversion and its applications

Optical frequency up-conversion is a technique, based on sum frequency generation in a non-linear optical medium, in which signal light from one frequency (wavelength) is converted to another frequency. By using this technique, near infrared light can be converted to light in the visible or near visible range and therefore detected by commercially available visible detectors with high efficiency and low noise. The National Institute of Standards and Technology (NIST) has adapted the frequency up-conversion technique to develop highly efficient and sensitive single photon detectors and a spectrometer for use at telecommunication wavelengths. The NIST team used these single photon up-conversion detectors and spectrometer in a variety of pioneering research projects including the implementation of a quantum key distribution system; the demonstration of a detector with a temporal resolution beyond the jitter limitation of commercial single photon detectors; the characterization of an entangled photon pair source, including a direct spectrum measurement for photons generated in spontaneous parametric down-conversion; the characterization of single photons from quantum dots including the measurement of carrier lifetime with escalated high accuracy and the demonstration of the converted quantum dot photons preserving their non-classical features; the observation of 2nd, 3rd and 4th order temporal correlations of near infrared single photons from coherent and pseudo-thermal sources following frequency up-conversion; a study on the time-resolving measurement capability of the detectors using a short pulse pump and; evaluating the modulation of a single photon wave packet for better interfacing of independent sources. In this article, we will present an overview of the frequency up-conversion technique, introduce its applications in quantum information systems and discuss its unique features and prospects for the future.     

Continuous-wave diode-laser end-pumped Nd:YVO4/KTP high-power solid-state green laser

A simple folded-cavity used for intracavity frequency-doubled Nd:YVO₄ laser was analyzed by transmission matrix and numerical calculation. We have selected a set of proper cavity parameters which can be used readily by operating at high power levels with low threshold, high efficiency, and wide dynamic operating range. 5.6-W TEM₀₀ green laser has been obtained at a 22-W pumping power and with an optical–optical conversion efficiency of 25.5%.     

Laser diode interferometer used for measuring displacements in large range with a nanometer accuracy

In this paper, the displacement of an object is measured with a photothermal phase-modulating laser diode interferometer. A feedback control system is designed to reduce the measurement errors caused by the fluctuations in the optical wavelength of the laser diode and the vibrations of the optical components in the interferometer. A new method is proposed to enlarge the measuring range of displacement. Using this method, the measuring range is enlarged from half wavelength to nearly 125 μm and the measurement accuracy is about 1 nm. The simulation and experimental results have shown the usefulness of the method and the feedback control system.     

New design for a variable optical attenuator based on a bent channel waveguide

We present a new method for bend loss control in a curved channel optical waveguide and employ it in a novel design of a thermo-optic variable optical attenuator. We show that the introduced asymmetric refractive index profile of the waveguide structure, combined with the optimal placement of the heating electrodes, leads to a significant increase of the dynamic range of the attenuator. PACS 42.82.Et; 42.70.Jk; 42.79.Ta