THEORETICAL COMPARISON OF THE BONDING OF CHALCOCARBONYL LIGANDS

Abstract

Fenske-Hall molecular orbital calculations on the complexes CpFe(CO)₂(CX)⁺ (X = O, S, Se, and Te) have been used to quantify the nature of bonding between the CX ligands and the metal atom. In addition, conclusions have been reached about the reactivity of the complexes under both nucleophilic and electrophilic attack. The previously established trend of increasing metal—ligand bond strength as X changes from O to S to Se is demonstrated by our molecular orbital calculations, and found to extend to Te. The mechanism for nucleophilic attack, variously explained in the past by either charge control or orbital control, is quantitatively ascribed to orbital control only. The nature of electrophilic attack on these complexes is also found to begin with orbital control.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Discrete Rh(III)/Fe(II) and Rh(III)/Fe(II)/Co(III) cyanide-bridged mixed valence compounds

The heterotrinuclear complexes trans- and cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) are unprecedented examples of mixed valence complexes based on ferrocyanide bearing three different metal centers. These complexes have been assembled in a stepwise manner from their {trans-III-L(14S)Co(III)}, {cis-VI-L(15)Rh(III)}, and {Fe(II)(CN)(6)} building blocks. The preparative procedure follows that found for other known discrete assemblies of mixed valence dinuclear Cr(III)/Fe(II) and polynuclear Co(III)/Fe(II) complexes of the same family. A simple slow substitution process of [Fe(II)(CN)(6)](4-) on inert cis-VI-[Rh(III)L(15)(OH)](2+) leads to the preparation of the new dinuclear mixed valence complex [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) with a redox reactivity that parallels that found for dinuclear complexes from the same family. The combination of this dinuclear precursor with mononuclear trans-III-[Co(III)L(14S)Cl](2+) enables a redox-assisted substitution on the transient {L(14S)Co(II)} unit to form [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+). The structure of the final cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) complex has been established via X-ray diffraction and fully agrees with its solution spectroscopy and electrochemistry data. The new species [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) and [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) show the expected electronic spectra and electrochemical features typical of Class II mixed valence complexes. Interestingly, in the trinuclear complex, these features appear to be a simple addition of those for the Rh(III)/Fe(II) and Co(III)/Fe(II) moieties, despite the vast differences existent in the electronic spectra and electrochemical properties of the two isolated units.     

Geometrical and Ground State Electronic Structures of Nitrosylcobalt Complexes [(RNCHCHNR)Co(NO)(CO)] (R = Isopropyl, 2,6‐Diisopropylphenyl or p‐Tolyl) from Experiment and DFT‐Calculations

The new complexes (RN=CH‐CH=NR)Co(NO)(CO), R = isopropyl ( 1 ), 2,6‐diisopropylphenyl ( 2 ) and p‐tolyl ( 3 ), were synthesized and spectroscopically characterized. Compounds 1 and 2 could be crystallized for X‐ray structure analysis, CO/NO disorder was observed for 1 . The results indicate a negligible amount of charge transfer from the Co(NO)(CO) moiety to the 1, 4‐diazabutadiene acceptor ligands in the ground state, in agreement with DFT calculations on 1 and as similarly reported for related 1, 4‐diaza‐1, 3‐butadiene complexes of Ni(CO)₂ and Fe(NO)₂.     

A mechanistic investigation of oxidative addition of methyl iodide to [Tp*Rh(CO)(L)

Reaction of methyl iodide with square planar [kappa(2)-Tp*Rh(CO)(PMe(3))] 1a (Tp* = HB(3,5-Me(2)pz)(3)) at room temperature affords [kappa(3)-Tp*Rh(CO)(PMe(3))(Me)]I 2a, which was fully characterized by spectroscopy and X-ray crystallography. The pseudooctahedral geometry of cationic 2a, which contains a kappa(3)-coordinated Tp* ligand, indicates a reaction mechanism in which nucleophilic attack by Rh on MeI is accompanied by coordination of the pendant pyrazolyl group. In solution 2a transforms slowly into a neutral (acetyl)(iodo) rhodium complex [kappa(3)-Tp*Rh(PMe(3))(COMe)I] 3a, for which an X-ray crystal structure is also reported. Kinetic studies on the reactions of [kappa(2)-Tp*Rh(CO)(L)] (L = PMe(3), PMe(2)Ph, PMePh(2), PPh(3), CO)] with MeI show second-order behavior with large negative activation entropies, consistent with an S(N)2 mechanism. The second-order rate constants correlate well with phosphine basicity. For L = CO, reaction with MeI gives an acetyl complex, [kappa(3)-Tp*Rh(CO)(COMe)I]. The bis(pyrazolyl)borate complexes [kappa(2)-Bp*Rh(CO)(L)] (L = PPh(3), CO) are much less reactive toward MeI than the Tp* analogues, indicating the importance of the third pyrazolyl group and the accessibility of a kappa(3) coordination mode. The results strengthen the evidence in favor of an S(N)2 mechanism for oxidative addition of MeI to square planar d(8) transition metal complexes.     

Intermolecular alkene and alkyne hydroacylation with beta-S-substituted aldehydes: mechanistic insight into the role of a hemilabile P-O-P ligand

A straightforward to assemble catalytic system for the intermolecular hydroacylation reaction of beta-S-substituted aldehydes with activated and unactivated alkenes and alkynes is reported. These catalysts promote the hydroacylation reaction between beta-S-substituted aldehydes and challenging substrates, such as internal alkynes and 1-octene. The catalysts are based upon [Rh(cod)(DPEphos)][ClO(4)] (DPEphos=bis(2-diphenylphosphinophenyl)ether, cod=cyclooctadiene) and were designed to make use of the hemilabile capabilities of the DPEphos ligand to stabilise key acyl-hydrido intermediates against reductive decarbonylation, which results in catalyst death. Studies on the stoichiometric addition of aldehyde (either ortho-HCOCH(2)CH(2)SMe or ortho-HCOC(6)H(4)SMe) and methylacrylate to precursor acetone complexes [Rh(acetone)(2)(DPEphos)][X] [X=closo-CB(11)H(6)Cl(6) or [BAr(F) (4)] (Ar(F)=3,5-(CF(3))(2)C(6)H(3))] reveal the role of the hemilabile DPEphos ligand. The crystal structure of [Rh(acetone)(2)(DPEphos)][X] shows a cis-coordinated diphosphine ligand with the oxygen atom of the DPEphos distal from the rhodium. Addition of aldehyde forms the acyl hydride complexes [Rh(DPEphos)(COCH(2)CH(2)SMe)H][X] or [Rh(DPEphos)(COC(6)H(4)SMe)H][X], which have a trans-spanning DPEphos ligand and a coordinated ether group. Compared to analogous complexes prepared with dppe (dppe=1,2-bis(diphenylphosphino)ethane), these DPEphos complexes show significantly increased resistance towards reductive decarbonylation. The crystal structure of the reductive decarbonylation product [Rh(CO)(DPEphos)(EtSMe)][closo-CB(11)H(6)I(6)] is reported. Addition of alkene (methylacrylate) to the acyl-hydrido complexes forms the final complexes [Rh(DPEphos)(eta(1)-MeSC(2)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X] and [Rh(DPEphos)(eta(1)-MeSC(6)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X], which have been identified spectroscopically and by ESIMS/MS. Intermediate species in this transformation have been observed and tentatively characterised as the alkyl-acyl complexes [Rh(CH(2)CH(2)CO(2)Me)(COC(2)H(4)SMe)(DPEphos)][X] and [Rh(CH(2)CH(2)CO(2)Me)(COC(6)H(4)SMe)(DPEphos)][X]. In these complexes, the DPEphos ligand is now cis chelating. A model for the (unobserved) transient alkene complex that would result from addition of alkene to the acyl-hydrido complexes comes from formation of the MeCN adducts [Rh(DPEphos)(MeSC(2)H(4)CO)H(MeCN)][X] and [Rh(DPEphos)(MeSC(6)H(4)CO)H(MeCN)][X]. Changing the ligand from DPEphos to one with a CH(2) linkage, [Ph(2)P(C(6)H(4))](2)CH(2), gave only decomposition on addition of aldehyde to the acetone precursor, which demonstrated the importance of the hemiabile ether group in DPEphos. With [Ph(2)P(C(6)H(4))](2)S, the sulfur atom has the opposite effect and binds too strongly to the metal centre to allow access to productive acetone intermediates.     

Synthesis and characterization of half-sandwich N-heterocyclic carbene complexes of cobalt and rhodium

A series of novel half-sandwich M(I) and M(III) complexes (M = Co, Rh) bearing the N-heterocyclic carbene ligand 1,3-dimesitylimidazol-2-ylidene (IMes) have been prepared and characterized. Thus, (eta5-C(5)R(5))M(IMes)(C(2)H(4))(M = Co, Rh; R = H, Me) were obtained from the corresponding bis(ethene) complexes (eta5-C(5)R(5))M(C(2)H(4))(2), except for CpRh(IMes)(C(2)H(4)) which was prepared via the novel 16-electron Rh(I) compound Rh(IMes)(C(2)H(4))(2)Cl. The carbonyl compounds (eta5-C(5)R(5))Co(IMes)(CO)(R = H, Me) were synthesized by thermal CO substitution of (eta5-C(5)R(5))Co(CO)(2). A diamagnetic, apparently 16-electron Co(III) compound [CpCo(IMes)I](+)[I(3)(-)] was obtained from CpCo(IMes)(CO) and I(2). Finally, Co(III) and Rh(III) complexes CpCo(IMes)Me(2) and Cp*Rh(IMes)Me(2) were prepared by methylation of [CpCo(IMes)I](+)[I(3)(-)], and ligand exchange at Cp*Rh(Me(2)SO)Me(2), respectively. The molecular structures of CpCo(IMes)(CO), CpRh(IMes)(C(2)H(4)), Cp*Rh(IMes)(C(2)H(4)), and Cp*Rh(IMes)Me(2) were determined by single crystal X-ray diffraction. Steric and electronic factors imposed by the strongly donating and sterically demanding IMes ligand are discussed on the basis of X-ray crystallographic, NMR, and IR spectroscopic analyses. Very poor correlations are found between values for (1)J(Rh-C(carbene)) and dRh-C(carbene) data for Rh(i) N,N-heterocyclic carbene complexes including literature data and this work.     

Übergangsmetallphosphidokomplexe. XIII. P-funktionelle phosphidoverbrückte Heterozweikernkomplexe mit und ohne Metall-Metall-Bindung; P(SiMe3)2-verbrückte cp(CO)xFe-Derivate

Transition Metal Phosphido Complexes. XIII. P-functional Phosphido-Bridged Heterobimetallic Complexes with and without a Metal-Metal Bond; P(SiMe₃)₂-Bridged cp(CO)_xFe Derivatives cp(CO)₂FeP(SiMe₃)₂ 1 reacts with the carbonyl nitrosyl complexes Co(CO)₃(NO), Fe(CO)₂(NO)₂,Mn(CO)(NO)₃ substituting a CO ligand and with the THF complexes M′(CO)₅THF(M′ = Cr, Mo, W), Mncp(CO)₂THF MnMecp(CO)₂ which can be obtained in solution substituting the THF ligand to give the phosphido-bridged bimetallic complexes cp(CO)₂Fe[μ-P(SiMe₃)₂]M′L_m 2 (M′L_m = Co(CO)₂(NO) b , Fe(CO)(NO)₂ c , Mn(NO)₃ d , Cr(CO)₅ f , Mo(CO)₅ g , W(CO)₅ h , Mncp(CO)₂ i , MnMecp(CO)₂ j ). Solutions of Li(Me₃Si)₂PM′L_m 4e–l (M′L_m = Fe(CO)₄ e , Crcp(CO)(NO) k , Vcp(CO)₃ l ) are available by a selective cleavage reaction of a Si? P bond in the complexes (Me₃Si)₃PM′L_m 3e–l using n-BuLi. Reactions of cp(CO)₂FeBr with 4e–l give the bimetallic complexes 2e–l . The open-chain complexes 2c, 2f, 2h–k undergo a photochemical decarbonylation reaction to form the phosphido-bridged bimetallic complexes cp(CO)Fe[μ-CO, μ-P(SiMe₃)₂]M′L_m?1(Fe-M′) 5 (M′L_m?1 = Fe(NO)₂ c , Cr(CO)₄ f , W(CO)₄ h , Mncp(CO) i , MnMecp(CO) j , Crcp(NO) k ) containing a metal-metal bond. Equilibria between various isomers can partially be observed in solutions of the complexes 5. I.R., N.M.R., and mass spectral data are reported.     

Molecular structures and excited states of CpM(CO)(2) (Cp = eta(5)-C(5)H(5); M = Rh, Ir) and [Cl(2)Rh(CO)(2)](-). Theoretical evidence for a competitive charge transfer mechanism

Molecular structures and excited states of CpM(CO)(2) (Cp = eta(5)-C(5)H(5); M = Rh, Ir) and [Cl(2)Rh(CO)(2)](-) complexes have been investigated using the B3LYP and the symmetry-adapted cluster (SAC)/SAC-configuration interaction (SAC-CI) theoretical methods. All the dicarbonyl complexes have singlet ground electronic states with large singlet-triplet separations. Thermal dissociations of CO from the parent dicarbonyls are energetically unfavorable. CO thermal dissociation is an activation process for [Cl(2)Rh(CO)(2)](-) while it is a repulsive potential for CpM(CO)(2). The natures of the main excited states of CpM(CO)(2) and [Cl(2)Rh(CO)(2)](-) are found to be quite different. For [Cl(2)Rh(CO)(2)](-), all the strong transitions are identified to be metal to ligand CO charge transfer (MLCT) excitations. A significant feature of the excited states of CpM(CO)(2) is that both MLCT excitation and a ligand Cp to metal and CO charge transfer excitation are strongly mixed in the higher energy states with the latter having the largest oscillator strength. A competitive charge transfer excited state has therefore been identified theoretically for CpRh(CO)(2) and CpIr(CO)(2). The wavelength dependence of the quantum efficiencies for the photoreactions of CpM(CO)(2) reported by Lees et al. can be explained by the existence of two different types of excited states. The origin of the low quantum efficiencies for the C-H/S-H bond activations of CpM(CO)(2) can be attributed to the smaller proportion of the MLCT excitation in the higher energy states.     

Size and charge effects on the binding of CO to late transition metal clusters

We report on the size and charge dependence of the C-O stretching frequency, nu(CO), in complexes of CO with gas phase anionic, neutral, and cationic cobalt clusters (Co(n)CO(-0+)), anionic, neutral, and cationic rhodium clusters (Rh(n)CO(-0+)), and cationic nickel clusters (Ni(n)CO(+)) for n up to 37. We develop models, based on the established vibrational spectroscopy of organometallic carbonyl compounds, to understand how cluster size and charge relate to nu(CO) in these complexes. The dominating factor is the available electron density for backdonation from the metal to the CO pi* orbital. Electrostatic effects play a significant but minor role. For the charged clusters, the size trends are related to the dilution of the charge density at the binding site on the cluster as n increases. At large n, nu(CO) approaches asymptotes that are not the same as found for nu(CO) on the single crystal metal surfaces, reflecting differences between binding sites on medium sized clusters and the more highly coordinated metal surface sites.     

Formation and reactivity of a porphyrin iridium hydride in water: acid dissociation constants and equilibrium thermodynamics relevant to Ir-H, Ir-OH, and Ir-CH2- bond dissociation energetics

Aqueous solutions of group nine metal(III) (M = Co, Rh, Ir) complexes of tetra(3,5-disulfonatomesityl)porphyrin [(TMPS)M(III)] form an equilibrium distribution of aquo and hydroxo complexes ([(TMPS)M(III)(D(2)O)(2-n)(OD)(n)]((7+n)-)). Evaluation of acid dissociation constants for coordinated water show that the extent of proton dissociation from water increases regularly on moving down the group from cobalt to iridium, which is consistent with the expected order of increasing metal-ligand bond strengths. Aqueous (D(2)O) solutions of [(TMPS)Ir(III)(D(2)O)(2)](7-) react with dihydrogen to form an iridium hydride complex ([(TMPS)Ir-D(D(2)O)](8-)) with an acid dissociation constant of 1.8(0.5) × 10(-12) (298 K), which is much smaller than the Rh-D derivative (4.3 (0.4) × 10(-8)), reflecting a stronger Ir-D bond. The iridium hydride complex adds with ethene and acetaldehyde to form organometallic derivatives [(TMPS)Ir-CH(2)CH(2)D(D(2)O)](8-) and [(TMPS)Ir-CH(OD)CH(3)(D(2)O)](8-). Only a six-coordinate carbonyl complex [(TMPS)Ir-D(CO)](8-) is observed for reaction of the Ir-D with CO (P(CO) = 0.2-2.0 atm), which contrasts with the (TMPS)Rh-D analog which reacts with CO to produce an equilibrium with a rhodium formyl complex ([(TMPS)Rh-CDO(D(2)O)](8-)). Reactivity studies and equilibrium thermodynamic measurements were used to discuss the relative M-X bond energetics (M = Rh, Ir; X = H, OH, and CH(2)-) and the thermodynamically favorable oxidative addition of water with the (TMPS)Ir(II) derivatives.     

An unprecedented type of migratory insertion reactions of unsaturated C3 units into Rh-O and Rh-C bonds

A series of iodo- and hydroxorhodium(I) complexes of the general composition trans-[RhX(=C=C=CRR')(PiPr3)2] (X = I: 5-7; X = OH: 8-11) was prepared from the related chlororhodium(I) precursors. The hydroxo compounds behave as organometallic Br?nsted bases and react with acids like MeCO2H, PhCO2H, PhOH, or TsOH by elimination of water to give the substitution products trans-[RhX'(=C=C=CRR')(PiPr3)2] (X' = MeCO2: 12, 13; X' = PhCO2: 14; X' = PhO: 15, 16; X' = TsO: 17, 18) in good to excellent yields. In contrast to the tosylates 17, 18, which react with CO by cleavage of the allenylidene-metal bond to give trans-[Rh(OTs)(CO)(PiPr3)2] (19), treatment of the acetato and phenolato derivatives 12, 13 and 15, 16 with CO affords by migratory insertion of the allenylidene unit into the Rh-O bond the alkynyl complexes trans-[Rh[C(triple bond)CCR(R')X'](CO)(PiPr3)2] (X' = MeCO2: 20, 21; X' = OPh: 22, 23). Similarly, the reactions of the hydroxo compounds 8, 10, and 11 with CH2(CN)2 and either CO or CNMe yield the carbonyl and the isocyanide complexes trans-[Rh[C(triple bond)CCR(R')CH(CN)2](L')(PiPr3)2] (L' = CO: 25-27; L' = CNMe: 28-30), respectively. By protolytic cleavage of the Rh-C sigma bond the gamma-functionalized alkynes HC(triple bond)CCR(R')CH(CN)2 (31, 32) are generated from 25, 26 and HCl in benzene. The molecular structure of 22 was determined by X-ray crystallography.     

Reaction of thiols with N-bonded sulfenamide complexes of cobalt(III): steric effect and reaction pathway

The products and kinetics of the reaction of several thiols (RSH = 2-aminoethanethiol, cysteine, penicillamine, cysteine ethyl ester) with N-bonded sulfenamide complexes ([Co(en)(2)(NH(2)S(CH(2))(2)NH(2)](3+) (IA), [Co(en)(2)(NH(2)SCH(2)CH(CO(2)H)NH(2)](3+) (IC), [Co(en)(2)(NH(2)SC(CH(3))(2)CH(CO(2)H)NH(2)](3+) (IP)) have been studied. The reaction proceeds by nucleophilic attack at sulfur with cleavage of the N-S bond to form a disulfide and leave a coordinated NH(3) ligand. The kinetics (pH 4-10) reveal that the deprotonated thiol, RS(-), is the reactive nucleophile and that the N-deprotonated sulfenamide complex is unreactive. The reactions of IP are approximately 10(4) times slower than those of IA or IC, and the reasons and consequences of this large steric effect are discussed. It is concluded, on the basis of these and other observations from the literature, that there will be substantial steric retardation to nucleophilic attack at two-coordinate sulfur in a R-C(CH(3))(2)-S-X-R' unit because of the regiospecificity of the reaction. The acid dissociation constants of IP and the X-ray structure of its bromide salt also are reported.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Photoinduced Fe-Cp bond cleavage and insertion reactions of strained silicon- and sulphur-bridged [1]ferrocenophanes in the presence of transition-metal carbonyls

The photochemical reactions of the moderately strained sila[1]ferrocenophane [Fe(eta-C(5)H(4))(2)SiPh(2)] (1) and the highly strained thia[1]ferrocenophane [Fe(eta-C(5)H(4))(2)S] (8) with transition-metal carbonyls ([Fe(CO)(5)], [Fe(2)(CO)(9)] and [Co(2)(CO)(8)]) have been studied. The use of metal carbonyls has allowed the products of photochemically induced Fe-cyclopentadienyl (Cp) bond cleavage reactions in the [1]ferrocenophanes to be trapped as stable, characterisable products. During the course of these studies the synthesis of 8 from [Fe(eta-C(5)H(4)Li)(2)TMEDA] (TMEDA=N,N,N',N'-tetramethylethylenediamine) and S(SO(2)Ph)(2) has been significantly improved by a change of reaction solvent and temperature. Photochemical reaction of 1 with excess [Fe(CO)(5)] in THF gave the dinuclear complex [Fe(2)(CO)(2)(mu-CO)(2)(eta-C(5)H(4))(2)SiPh(2)] (9). The analogous photolytic reaction of 8 with [Fe(CO)(5)] in THF gave cyclic dimer [Fe(eta-C(5)H(4))(2)S](2) (10) and [Fe(2)(CO)(2)(mu-CO)(2)(eta-C(5)H(4))(2)S] (11), with the former being the major product. Photolysis of 1 with [Co(2)(CO)(8)] afforded the remarkable tetrametallic dimer [(CO)(2)Co(eta-C(5)H(4))SiPh(2)(eta-C(5)H(4))Fe(CO)(2)](2) (13). The corresponding photochemical reaction of 8 with [Co(2)(CO)(8)] gave a trimetallic insertion product in high conversion, [Co(CO)(4)(CO)(2)Fe(eta-C(5)H(4))S(eta-C(5)H(4))Co(CO)(2)] (14). These reactivity studies show that UV light promotes Fe-Cp bond cleavage reactions of both of the [1]ferrocenophanes 1 and 8. We have found that, whereas the less strained sila[1]ferrocenophane 1 requires photoactivation for Fe-Cp bond insertions to occur, the highly strained thia[1]ferrocenophane 8 undergoes both irradiative and non-irradiative insertions, although the latter occur at a slower rate. Our results suggest that such photoinduced bond cleavage reactions may be general and applicable to other related strained organometallic rings with pi-hydrocarbon ligands.     

Molecular properties of adsorbates that affect the growth kinetics of archerite (KDP)

We explore the molecular properties of adsorbates that dramatically affect growth kinetics and morphology of the [100] face of archerite, also known as potassium dihydrogen phosphate (KH(2)PO(4) or KDP). Aqueous complexes of Al(III), Fe(III), and Cr(III) are known to affect KDP growth, albeit the actual step-pinning complex(es) is unknown. Using in situ atomic force microscopy (AFM), we measured changes in the growth rates of the [100] face of KDP with supersaturation in the presence of trace amounts of [Co(NH(3))(6)](3+), [Fe(CN)(6)](3-), eta(1)-[Co(NH(3))(5)HPO(4)](+), eta(2)-[Co(NH(3))(4)HPO(4)](+), eta(2)-[Co(NH(3))(4)P(2)O(7)H(2)](+), and [Rh(H(2)PO(4))(2)(H(2)O)(4)](+). Unlike in experiments using trivalent-metals, these complexes do not change stoichiometry or structure on the timescale of step motion, so that the actual molecular interactions that affect growth can be studied. Step velocity and morphology on the [100] face are unaffected by outer-sphere coordination complexes of either charge. Surprisingly, inner-sphere phosphatoammine complexes do not affect growth rates regardless of how the phosphate group is coordinated to the metal. However, doping the growth solution with [Rh(H(2)PO(4))(2)(H(2)O)(4)](+) results in profound step pinning, matching the behavior of KDP surfaces grown in the presence of Rh(III) after an equilibration period. Not only is an inner-sphere phosphate group needed to dock a trivalent metal to the step edge, but compatible hydrogen bonding of the remainder of the inner-sphere ligands with the bulk lattice is also essential.     

Ir3Co6 and Co3Fe3 dithiolene cluster complexes: multiple metal-metal bond formation and correlation between structure and internuclear electronic communication

π-Conjugated trinuclear iridium and cobalt dithiolenes undergo multiple metal-metal bond formation with Co(2)(CO)(8) and Fe(CO)(5), giving rise to Ir(3)Co(6) nonanuclear and Co(3)Fe(3) hexanuclear cluster complexes 5 and 6, respectively. 5 retains a planar framework and intense π conjugation across the three iridadithiolenes and the phenylene bridge, which results in intense electronic communication among the three Co(2)(CO)(5) units in reduced mixed-valent states.     

Hemilabile and reversible carbon monoxide binding properties of iron(II), cobalt(II) and nickel(II) complexes containing a new tridentate P-S-N ligand

Several first-row transition metal complexes of the formulation [M(1)(2)](X)(2) {where 1 = Ph(2)PCH(2)CH(2)S(2-C(6)H(4)NH(2)); M = Fe(II), X = BF(4)(-) (2); M = Co(II), X = BF(4)(-) (3), Ni(II), X = ClO(4)(-) (4)} have been prepared by reaction of two equivalents of the new P-S-N ligand Ph(2)PCH(2)CH(2)S(2-C(6)H(4)NH(2)) 1 with one equivalent of the appropriate [M(OH(2))(6)](X)(2) precursor in acetonitrile. In the solid state, complexes 2-4 exist as distorted centrosymmetric octahedral structures featuring facially capping ligands in an all-trans arrangement. Reaction of 2 and 3 with a stream of carbon monoxide (1 atm.) for 5 min in acetonitrile generates iron(II) monocarbonyl species of formulation [Fe(CO)(1)(2)](BF(4))(2)2a, and a cobalt(II) dicarbonyl complex, [Co(CO)(2)(1)(2)](BF(4))(2)3a, which can be isolated in the solid state. Complete removal of CO is achieved by either heating to reflux samples of 2a in acetonitrile for 5 min or by heating solid samples of 3a at 120 °C in vacuo over a period of 4 h. The binding of carbon monoxide is fully reversible for 2 and 3 and can be repeated over multiple cycles. When the same trapping reactions were carried out with very low radiochemical (11)CO concentrations, metal carbonyl species were no longer formed. It is likely that the kinetics of (11)CO adduct formation are too slow to allow for effective trapping under the applied radiochemical conditions.     

Heterometallic derivatives of [Fe2Cp2(μ-PCy)(μ-CO)(CO)2]: rational synthesis of polynuclear complexes from neutral precursors having pyramidal-phosphinidene bridges

The title complex (Cp = η(5)-C(5)H(5)) reacted with the labile carbonyl complexes [M(CO)(5)(THF)] (M = Cr, Mo, W) and [MnCp'(CO)(2)(THF)] (Cp' = η(5)-C(5)H(4)Me) to give phosphinidene-bridged trimetallic compounds of formula [Fe(2)MCp(2)(μ(3)-PCy)(μ-CO)(CO)(7)] (Cr-P = 2.479(1) ?) and [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(CO)(4)], respectively, after formation of a new M-P bond in each case, and related heterometallic complexes [Fe(2)MClCp(2)(μ(3)-PCy)(μ-CO)(CO)(2)] (M = Cu, Au; Au-P = 2.262(1) ?) were cleanly formed upon reaction with CuCl or the labile tetrahydrothiophene (THT) complex [AuCl(THT)]. The reaction with [Fe(2)(CO)(9)] proceeded analogously to give the triiron derivative [Fe(3)Cp(2)(μ(3)-PCy)(μ-CO)(CO)(6)] in high yield (new Fe-P bond =2.318(1) ?), along with a small amount of the pentanuclear compound [{Fe(CO)(3)}{(μ(3)-PCy)Fe(2)Cp(2)(μ-CO)(CO)(2)}(2)], the latter displaying a central Fe(CO)(3)P(2) core with a distorted bipyramidal geometry (P-Fe-P = 164.2(1)°). In contrast, the reaction with [Co(2)(CO)(8)] resulted in a full disproportionation process to give the salt [{Co(CO)(3)}{(μ(3)-PCy)Fe(2)Cp(2)(μ-CO)(CO)(2)}(2)][Co(CO)(4)], having a pentanuclear Fe(4)Co cation comparable to the above Fe(5) complex (P-Co-P = 165.3(2)°). The attempted photochemical decarbonylation of the above trinuclear complexes gave results strongly dependent on the added metal fragment. Thus, the irradiation with visible or visible-UV light of the new Fe(3) and Fe(2)Cr species caused no decarbonylation but a tautomerization of the metal framework to give the corresponding isomers [Fe(2)MCp(2)(μ(3)-PCy)(μ-CO)(CO)(n)] now exhibiting a dangling FeCp(CO)(2) moiety (M = Cr, n = 7, Cr-Fe = 2.7370(3) ?; M = Fe, n = 6, new Fe-Fe bond = 2.6092(9) ?) as a result of the cleavage of the Fe-Fe bond in the precursor and subsequent formation of a new M-Fe bond. These processes are reversible, since the new isomers gave back the starting complexes under low (Cr) or moderate (Fe) thermal activation. In contrast, the manganese-diiron complex [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(CO)(4)] could be decarbonylated stepwise, to give first the tetracarbonyl complex [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(2)(CO)(2)] and then the tricarbonyl cluster [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(3)], the latter having a closed triangular metal core (Fe-Fe = 2.568(7) ?; Mn-Fe = 2.684(8) and 2.66(1) ?).     

Zinc-rich compounds of iron and cobalt: formation of [Fe2Zn(n)] (n = 2-4) and [Co2Zn3] cores

The reactions of heteroleptic GaCp*/CO containing transition metal complexes of iron and cobalt, namely [(CO)(3)M(μ(2)-GaCp*)(m)M(CO)(3)] (Cp* = pentamethylcyclopentadienyl; M = Fe, m = 3; M = Co, m = 2) and [Fe(CO)(4)(GaCp*)], with ZnMe(2) in toluene and the presence of a coordinating co-solvent were investigated. The reaction of the iron complex [Fe(CO)(4)(GaCp*)] with ZnMe(2) in presence of tetrahydrofurane (thf) leads to the dimeric compound [(CO)(4)Fe{μ(2)-Zn(thf)(2)}(2)Fe(CO)(4)] (1). Reaction of [(CO)(3)Fe(μ(2)-GaCp*(3))Fe(CO)(3)] with ZnMe(2) and stoichiometric amounts of thf leads to the formation of [(CO)(3)Fe{μ(2)-Zn(thf)(2)}(2)(μ(2)-ZnMe)(2)Fe(CO)(3)] (2) containing {Zn(thf)(2)} as well as ZnMe ligands. Using pyridine (py) instead of thf leads to [(CO)(3)Fe{μ(2)-Zn(py)(2)}(3)Fe(CO)(3)] (3) via replacement of all GaCp* ligands by three{Zn(py)(2)} groups. In contrast, reaction of [(CO)(3)Co(μ(2)-GaCp*)(2)Co(CO)(3)] with ZnMe(2) in the presence of py or thf leads in both cases to the formation of [(CO)(3)Co{μ(2)-ZnL(2)}(μ(2)-ZnCp*)(2)Co(CO)(3)] (L = py (4), thf (5)) via replacement of GaCp* with {Zn(L)(2)} units as well as Cp* transfer from the gallium to the zinc centre. All compounds were characterised by NMR spectroscopy, IR spectroscopy, single crystal X-ray diffraction and elemental analysis.