Ni催化的碳(sp2)-碳和碳(sp2)-杂交叉偶联反应

综述了Ni催化的碳(sp²)-碳和碳(sp²)-杂交叉偶联反应. 主要反应类型有: Heck反应、Sonogashira反应、Kumada-Corriu反应、Negishi反应、Stille反应、Suzuki反应、Ullmann反应、C—N偶联反应、C—O偶联反应、C—P偶联反应和C—S偶联反应. 详细地介绍了各个反应的底物要求、反应条件、反应选择性和产率. 最后, 我们对Ni催化的反应机理研究也作了总结.     

氯取代丙烷伯氢反应的准经典轨线研究

用准经典轨线方法研究了氯取代丙烷伯氢的反应.采用三体LEPS势能函数构筑势能面.结果表明, 氯取代丙烷伯氢的反应呈现出与氯取代丙烷仲氢反应不同的微观反应进程.对于氯取代丙烷仲氢的反应,只有一种反应通道,反应过程中有碰撞复合物产生.对于氯取代丙烷伯氢的反应,有两种反应通道,一种有碰撞复合物生成,另一种则没有.     

苯胺和乙二醇生成吲哚反应机理的DFT理论研究

利用传统过渡态理论研究了苯胺和乙二醇生成吲哚反应的机理,设计了四种可能的反应通道.优化计算了反应物、产物和每个通道中可能的中间体和过渡态的几何构型,找出并确认了每个反应通道中各基元反应的可能过渡态和活化能.经分析对比给出该反应可能的主反应通道.同时初步探讨了在经过渡态TS1的基元反应中加入催化剂Ag后的反应机理.加入催化剂后,反应的活化能降低.     

用变分过渡态理论研究H和Si2H6反应的动力学

理论研究了氢和乙硅烷的反应. 该反应包含着2种类型的反应通道：抽提反应和取代反应; 对其机理研究结果表明抽提反应是主要反应通道; 用变分过渡态理论加小曲率隧道效应对该反应进行了动力学研究, 所得结果与实验值符合得很好. 比较该反应与氢和硅烷的反应, 结果表明乙硅烷中Si-H键的反应活性比硅烷中Si-H键的活性高.     

新型仿生光催化剂HMS-FePcS催化降解孔雀绿的反应因素及动力学

在可见光照射下,应用合成的新型仿生光催化剂HMS-FePcS,催化降解孔雀绿模拟废水.考察了温度、光源强度、催化剂用量、过氧化氢用量以及金属活性中心(Fe,Cu和Co)等一系列因素对降解反应的影响,得到了优化的反应条件.在此基础上推导出孔雀绿光催化降解的反应级数及反应速率常数.该降解反应分两个阶段,初始反应的速率与反应物的浓度无关,呈现出零级反应的特征;而后一阶段的反应呈现一级反应的特征.两段反应均可用经典的Langmuir-Hinshelwood多相催化动力学模型进行合理的解释.     

胺作为配体在钯催化偶联反应中应用

对近期我们研究小组及其它研究小组在利用胺作为钯催化偶联反应的配体研究进展进行了总结. 钯/胺作为催化体系主要应用的偶联反应包括: Suzuki-Miyaura交叉反应, Sonogashira交叉反应, Stille交叉反应, Hiyama交叉反应和Heck反应. 研究结果表明胺可以作为价廉和高效的配体促进钯催化交叉偶联反应.     

化学反应的内禀反应坐标法I:甲硫醛脱氢反应的IRC解析

本文用内禀反应坐标法讨论了甲硫醛分子的脱氢反应机理. 在4-31G基组上对此反应做了量子化学从头计算和反应路解析, 得出过渡态结构, 反应势能曲线, 活化能, 反应热以及沿反应坐标反应系的一些物理量的变化, 并对过渡态做了振动分析. 所得结果与甲醛,甲硫醇和甲醇等分子的脱氢反应结果做了对比. 还给出沿反应坐标分子间弹性碰撞阶段和最佳碰撞角等信息. 同时, 计算了反应的频率因子A,讨论了反应速率常数k值与温度的关系.     

流动化学在卤化反应中的应用

有机物的卤化反应是有机合成中最重要的转化之一.传统釜式卤化反应存在高放热及选择性差等问题,且卤化试剂一般具有毒性和腐蚀性.流动化学在传质和传热方面具有显著优势,可精确控制反应温度及试剂用量,并且可在线淬灭危险试剂,避免其暴露.按有机化合物卤化反应分类,系统地归纳了流动化学在氟化反应、氯化反应、溴化反应和碘化反应中的应用进展,并展望了其发展趋势.     

反应过程因子乘积守恒

在周环反应中,参与反应体系的电子数,反应条件和立体选择性具有严格的规律性.本文根据分子轨道理论和前线轨道理论,分析了周环反应过程内外因素的对称性,引入反应电子数因子、条件因子和动作因子,统称为反应过程因子(P)的概念.并定义P=±1.则周环反应选择规则遵循公式??P_i=±1,即反应过程因子乘积守恒. 1表示反应允许,-1表示反应禁止.     

烷氧基重排反应

本文综述了烷氧基重排反应.根据不同的反应机制,可将烷氧基重排反应分为三类:通过碳正离子重排的烷氧重排反应,分子内烷氧基亲核取代反应和烷氧O-迁移反应.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.