COLLOIDAL DISPERSIONS OF ORDERED LIPID-WATER PHASES

Aqueous dispersions of colloidal aggregates of liquid-crystalline lipid-water phases are described. The lamellar liquid-crystalline phase can form liposomal dispersions, which are wellknown from extensive studies of these particles in drug delivery. Less is known about dispersions of cubic and hexagonal phases. The preparation of such colloidal dispersions, their structure and physical properties are summerised. The dispersed cubic phase is compared to liposomal dispersions, and it is concluded that an important application of the cubic particles will involve encapsulation of proteins and protection of their native conformation.     

Colloidal self-assemblies used as templates to control size,shape and self-organization of nanoparticles

In this paper we show that the use of colloidal assemblies as templates favors the control of the size and shape of nanoparticles. As expected theoretically, the change in size and shape of copper metal nanosized particles induces changes in their optical properties. Cylindrical copper metal particles having the same size and shape can be obtained in various regions of the phase diagram when the template is made of interconnected cylinders. Self-assembly of silver metal nanoparticles is reported. Monolayers of particles organized in a hexagonal network are formed over very large domains. Small or large aggregates can also be produced, and, in these aggregates, the particles are highly organized and form pseudo-crystals with a face-centered cubic structure for various particles sizes. The optical properties of the silver nanoparticles isolated in micellar solution or self-assembled in 2D or 3D supperlattices are reported. Syntheses of magnetic fluids differing in their particle size are presented. The magnetic properties differ with the particle size.     

Polyurethane Ionomers,a New Class of Block Polymers

Linear polyurethanes containing ionic centers at wide intervals are heteropolymers having a pronounced segment structure, i.e. ionomers. As a result of interactions between chains (Coulomb forces and hydrogen bonds), their properties are similar to those of crosslinked elastomers. They are strongly associated both in organic and in aqueous solutions. Polyurethane ionomers in polar organic solvents spontaneously form stable aqueous dispersions on addition of water, with the ionomer as the disperse phase. The particle size can be varied between 20 nm and 1 mm.     

Phosphated polyurethane dispersions: synthesis,emulsification mechanisms and the effect of the neutralising base

Phosphate-containing polyester macroglycols with different phosphate contents were synthesised from a phosphorus-containing monomer, a dicarboxylic acid and a diol. The macroglycols were then used as a soft segment for the preparation of segmented polyurethane dispersions. Aqueous dispersions were made by phase inversion from the organic solvent after the carboxylic acid groups were neutralized. Phase inversion was found to take place in three distinct stages. The stability and particle size of the polyurethane dispersions were dependent of the amount of carboxylic acid groups present, the degree of neutralisation and the neutralising cations. Metal-neutralized polyurethane dispersions gave smaller particle sizes and the corresponding films showed higher swelling in water due to the ease of hydration. The particle size and stability of the tertiary amine-neutralised polyurethanes were found to be related to the water solubility of the amines at a given dispersion temperature. Particle size increases for the higher alkyl chain neutalising amines due to the poor hydration of the corresponding cations.     

Aqueous phase behavior and dispersed nanoparticles of diglycerol monooleate/glycerol dioleate mixtures

The first part of this study concerns the aqueous phase behavior of mixtures of diglycerol monooleate (DGMO) and glycerol dioleate (GDO) examined by X-ray diffraction (XRD). The ternary phase diagram displays a multitude of liquid crystalline phases (polymorphism). With increasing GDO content the following phase sequence was observed: lamellar (L(alpha)); two reversed bicontinuous cubic phases (Q(230) and Q(224)); reversed hexagonal (H(II)); the reversed micellar (L(2)) phase. The second part deals with the preparation and characterization of aqueous dispersions of the reversed hexagonal phase in the presence of the nonionic triblock copolymer Pluronic F127. Submicrometer-sized monocrystalline H(II) phase particles were obtained, as evidenced by cryo-transmission electron microscopy (cryo-TEM), laser diffraction, and XRD, by use of a simple and reproducible preparation method including a heat-treatment step. Moreover, the particle size distributions of the H(II) phase nanoparticle dispersions were narrow as determined by laser diffraction measurements. Using XRD, we show that the polymeric stabilizer is depleted from the core of the hexagonal particles and preferentially located at the surface. It is concluded that the preferential distribution of stabilizing agents at particle surfaces is a prerequisite for the formation of structurally well-defined and kinetically stable H(II) phase particles (Hexosome).     

液化膜对胶体悬浮液粘度的影响

Viscosity is one of the most important properties of colloids in mixing, transportation, stabilization, energy consumption, and so on. According to Einstein‘s viscosity equation, the viscosity of a colloidal dispersion increases with the increase of particle concentration. And the equation can be applicable to all micro-particle dispersions, because the effect of solvation films coated on particles can be neglectable in that case. But with the decrease of particle size to nano-scale, the formation of solvation films on nano-particles can greatly affect the viscosity of a dispersion, and Einstein‘s equation may not be applicable to this case. In this work, one kind of micro-size silica particle and two kinds of nano-size silica particles were used to investigate the effect of solvation films on dispersion viscosity, dispersed in water and ethyl alcohol solvents, respectively. The results of theoretical calculation and experimental investigation show that the increase of viscosity is contributed from solvation films by more than 95 percent for nano-particle dispersions, while less than 10 percent for micro-particle dispersions.     

Evaluation of the organization of the homoionic smectite layers (Na(+) or Ca(2+)) in diluted dispersions using granulometry, microscopy and rheometry

Smectites are swelling clay materials with pronounced colloidal properties that are widely used in industry. These properties originate in the electrokinetic properties of the smectite layers and their linkage capacities. Thin layers may be dispersed or aggregated according to many parameters, such as concentration, particle size and morphology, exchangeable cation nature and chemical environment (pH, ionic strength). The literature usually provides general rules, like the sodium dispersion contains a lot of small units whereas the calcium dispersion contains a few large units. A volume of water molecules bound to the clay surface is considered as the immobile water phase that behaves like the solid phase obstructing the flow. The water immobilized around layers and trapped inside aggregates cannot participate to the flow. In this study, we evaluated the volume occupied by calcium and sodium units inside the dispersion containing the immobile water phase. First, the smectite was cautiously extracted from a raw bentonite and its physicochemical properties were determined. A large quantity of extracted and saturated smectite (Na-smectite and Ca-smectite) was obtained. Second, the unit size and a shape factor for each sample were evaluated using granulometry and scanning transmission electron microscopy on wet samples (Wet STEM) and some flow curves. Na-smectite dispersions contain 0.13 microm(2) surface units with a shape factor of 50. Ca-smectite dispersions contain 0.32 microm(2) surface units with a shape factor of 3.3. Finally, rheometry allowed us to evaluate the unit occupancy using an adaptation of the Krieger-Dougherty law. We used shape factors and evaluated the concentration from which the entire immobile volume was connected (6.4% for Na-smectite and 11.9% for Ca-smectite). This study explains the evolution of flow properties with increasing concentrations by the evolution of layer interactions at the microscopic scale for homoionic smectite particles in diluted dispersions.     

The rheology of aqueous emulsions prepared by direct emulsification and phase inversion from a high viscosity alkyd resin

A comparison of the rheological properties of dispersions of an alkyd resin in water prepared by direct emulsification and phase inversion has been conducted. These dispersions have application as the base dispersion in the manufacture of the new generation of water based gloss paints. An experimental investigation of the effect of dispersed phase fraction, droplet size and dispersion age on the rheological properties of dispersions produced by each emulsification route has been carried out. The droplet size distributions of the dispersions are also characterised. It was found that phase inversion always gave a smaller droplet size distribution than direct emulsification. Surprisingly it was found that for a given dispersed phase fraction, the dispersions with a smaller droplet size, produced by the phase inversion route, have a lower zero shear rate viscosity than those produced by the direct emulsification route. The rheology of the direct emulsification samples was also observed to change with age, whilst with phase inversion samples the rheology was stable. It is proposed that this and other differences observed between the two methods of manufacture can be associated to the presence, or otherwise, of excess surfactant in the aqueous phase.     

Effect of the synthesis temperature on some properties of aqueous dispersions of nanoparticles of oxygen-containing lanthanum compounds

The effect of the synthesis conditions of aqueous dispersions of oxygen-containing lanthanum compounds on the size, shape, and phase composition of nanoparticles is studied. It is established that the hydrolysis of lanthanum nitrate at the boiling point of a solution affords sols with a narrower particle size distribution and a higher degree of particle crystallinity. The ranges of [OH^?]/[La³⁺] concentration ratios are determined within which aggregatively stable aqueous dispersions of oxygen-containing lanthanum compounds can be synthesized.     

Photo-responsive properties of poly(NIPAM-co-AAc) microgel particles with absorbed, hydrophobically modified organic salts

The absorption of two hydrophobically modified organic salts (HMOSs), containing azobenzene units, into poly(N-isopropylacrylamide-co-acrylic acid) microgel particles has been studied at pH 8 and 20 °C. These dispersions were then irradiated with UV light (wavelength 365 nm) for 10 min to observe the effect on the microgel particle properties, such as the adsorbed amount of the HMOS, the particle size, and the electrophoretic mobility. We show that irradiation of these dispersions with UV light can lead to induced, partial desorption of the HMOS molecules, with concomitant changes in the size and electrophoretic mobility of the microgel particles. This is due to a conformational switch (trans-form to cis-form) in the HMOS molecules, which reduces the strength of the hydrophobic interaction between the HMOS molecules and the isopropyl moieties within the microgel network. Moreover, the original absorbed amounts, size, and electrophoretic mobility values can be largely restored after storage in the dark for extended periods.     

Soft matter dispersions with ordered inner structures, stabilized by ethoxylated phytosterols

This paper describes the formation and characterization of liquid crystalline dispersions based on the hexagonal phase of GMO/tricaprylin/water. As a stabilizer of the soft particles dispersed in the aqueous phase, a non-ionic, non-polymeric surfactant—ethoxylated phytosterol with 30 oxyethylene units (PhEO) was utilized. In contrast to Pluronic copolymers, normally utilized in the stabilization of liquid crystalline dispersions with ordered inner structure, use of such non-polymeric surfactant is not a common practice in this field. We revealed how properties of these particles, such as internal structure, size, and stability, can be rationally modified by the concentration of the stabilizing agent and processing conditions. The physical stability of the hexosomes was further examined by the LUMiFuge technique.Structural effect of PhEO solubilization on the properties of the bulk H_II mesophase system showed that phase behavior was greatly influenced following phase transitions: H_II → H_II + cubic → cubic + L_α → L_α. The decrease of hydrogen bonding of the hydroxyl and carbonyl groups of monoolein with water and simultaneous hydration of EO groups of PhEO appeared to be important for the observed behavior. The use of PhEO as a dispersant resulted in a soft matter multi-phase water dispersion with bimodal distribution of the particle population. Effective stabilization of hexosomes was obtained in an extremely narrow concentration range of PhEO (0.1–0.2 wt%), coexisting with small vesicles and disordered particles. At higher PhEO content, particles had disordered inner structure, and unilamellar and multilamellar vesicles, at the expense of hexosomes in consequence of incorporation of the dispersant into the hexosome structure. PhEO was found to induce lamellar phase formation, introducing disorder into the hexagonal LLC and reducing their domain size.Finally, hexosomes were evaluated as delivery vehicles for the therapeutic peptide desmopressin. Sustained release of this drug was observed during the first 10 h; however, permeation drastically increased in the 10–24 h range.     

Micromorphology and phase behavior of cationic polyurethane segmented copolymer modified with hydroxysilane

A series of cationic waterborne polyurethane dispersions (SiPU) modified with hydroxysilane (HPMS) were successfully synthesized based on poly(oxytetramethylene) glycols (PTMG) and isophorone isocyanate (IPDI), and the films were obtained by casting the dispersions on tetrafluoroethylene (TFE) plates. Effects of HPMS content on micromorphology, particle size of the dispersions were studied, as well as thermal properties, phase behavior and surface structure of the films. The particles had the morphology of a solid sphere, with particle size varying from 17.1 nm to 114.4 nm corresponding to the increase of HPMS concentration, which can be attributed to the increase of interfacial tension. XPS spectra indicated the surface migration of Si element in the process of film forming, and the SiPU surface was mainly composed of soft segments. DSC analysis, together with TG-DTG-DTA results demonstrated the HPMS soft segment merged with the transition region of PU matrix, forming part of polyurethane backbone, but an improved microphase separation was observed when HPMS concentration greater than 15%. It was also found that incorporation of flexible HPMS prevented the degradation of polyurethane backbone, resulting in the increase of thermal stability in ultimate copolymer.     

Preparation and properties of colloidal iron dispersions

We systematically study the properties of dispersions of iron-based colloids synthesized in a broad size range by thermal decomposition of ironcarbonyl using different stabilizing surfactants. The synthesis results in stable dispersions of monodomain magnetic colloids. Our particles appear to consist of an amorphous Fe(0.75)C(0.25) alloy. Sizes of particles coated with modified polyisobutene or oleic acid can be easily controlled in the 2-10 nm range by varying the amounts of reactants. Extensive characterization with various techniques gives particle sizes that agree well with each other. In contrast to dispersions of small particles, which consist of single colloids, dynamic aggregates are present in dispersions of larger particles. On exposure to air, an oxide layer forms on the particle surface, consisting of a disordered Fe(III) oxide.     

Aqueous dispersions of cubic lipid–water phases

Inverse lipid–water phases such as cubic phases can form kinetically stable dispersions by fragmentation in water. Cubic lipid phases can be dispersed by polar lipids favoring lamellar phases or by block copolymers, which can close the bilayer at the surface so that the hydrocarbon chain core is not exposed to water. Monodisperse particles based on glycerol monooleate, with their bilayer curved as the P-, D- or G-minimal surface, have been prepared in this way. Their inner bilayer conformation and outer shape have been examined, mainly by X-ray diffraction and cryo transmission electron microscopy. There is also a different type of cubic lipid bilayer particles with a periodicity in the micrometer range, which have been identified in phospholipid–water dispersions and in cell membrane assemblies. The mechanism behind formation in vivo of such cubic membranes, which also follow the P-, D- and G-surfaces, is discussed. Other lipid–water dispersions with lower symmetry are finally considered; dispersions formed by the inverse hexagonal phase and the dispersed state of a tetragonal bilayer structure formed by lung surfactants.     

Self-assembled FePt nanocrystals with large coercivity: reduction of the fcc-to-L1(0) ordering temperature

Herein we report the synthesis and properties of Fe(55)Pt(45) nanoparticles, both monodisperse and self-assembled into hexagonal close-packed and cubic arrays of 4.0 +/- 0.2 nm size in an L1(0) structure, obtained by a modified polyol process. The new synthetic route improved the control over the particle composition, thereby reducing the temperature required to convert from face-centered cubic (fcc) to face-centered tetragonal (fct) phase by some 30-50 degrees C without additives. Annealing at 550 degrees C for 30 min converts the self-assembled nanoparticles into ferromagnetic nanocrystals with large coercivity, H(C) = 11.1 kOe. Reducing the fcc-to-fct (L1(0)) ordering temperature avoided particle coalescence and decreased the loss in particle positional order without compromising the magnetic properties, as is generally observed when additives are used.     

Equation of state of colloidal dispersions

We present a comparison of experimentally and theoretically determined osmotic pressures for various colloidal dispersions. Experimental data is collected from several different silica and polystyrene dispersions. The theoretical pressure determinations are based on the primitive model combined with the cell model, and the physical quantities are calculated exactly using Monte Carlo simulations in the canonical and grand canonical ensemble. The input to the simulations in terms of colloidal particle size, surface charge density, and so forth are taken directly from experiments, and the approach does not contain any adjustable parameters. The agreement between theory and experiment is very good without any fitting parameters, showing that the simplifications behind the primitive model and the cell model are physically sound. The results reveal a surprising correspondence between the equations of state in spherical and planar geometries, indicating that the particle shape is of secondary importance in dispersions dominated by repulsive interactions. For one of the silica dispersions, we have also investigated how various monovalent counterions influence the swelling properties. Within experimental error, we are unable to detect any ion specificity, which is further support for the theoretical models used.     

Microparticles based on chitosan–hyaluronic acid interpolyelectrolyte complex,which provide stability of aqueous dispersions

Turbidimetric titration and laser scattering methods were used to assess the phase behavior of mixtures of chitosan and hyaluronic acid in aqueous solutions in relation to interaction conditions. Conditions were found in which stable water dispersions with particle size of up to 573 nm can be obtained. It was found that the molar ratios and the overall concentration mode of the starting-polyelectrolyte solutions affect the particle size.     

Tuning the size,concaveness, and aspect ratio of concave cubic gold nanoparticles produced with high reproducibility

Reproducible fabrication of concave cubic gold nanoparticles with precise control over size, concaveness, and aspect ratio is important because the nanoscale structural characteristics can influence their plasmonic and catalytic properties. However, this is particularly challenging because the number of synthetic parameters involved in the fabrication strategy adds complexity to the reaction mechanism. Here, we introduce a simplified seed-mediated method and uncover the unknown conceptual insights on how the different halides and their concentration influence the surface structure and stability of underpotential silver monolayer deposited on the high energy facets of nanoparticles. The results reveal that adding Br^? and I^? ions to growth solution offers a predominant way to control the reaction kinetics and engineering nanoparticles with a predefined size, morphology, concaveness, aspect ratio, and plasmonic properties. Using spectroscopy and microscopy techniques, we shed new light on the reaction kinetics of concave cubic gold nanoparticles using the combined influence of silver underpotential deposition and halides. The strategy developed here can be expanded to fabricate gold nanoparticles of complex geometries. The results from our electromagnetic calculations suggest that the self-assembled superstructure of concave cubic gold nanoparticles can be more appealing for developing an ultra-sensitive sensing platform than to self-assembled superstructures of truncated cubic gold nanoparticles.     

Phase diagram of spherical particles interacted with harmonic repulsions

We construct the phase diagram of spherical particles interacted with harmonic repulsions, which are ultrasoft and bounded at fully overlapping. This simple potential form can be used for describing the thermodynamic properties and dynamic behavior of interpenetrable globular micelles, microgels, starlike polymer solutions, and so on. Using dissipative particle dynamics simulations combined with thermodynamic integration, we compute chemical potentials of fluid phase and a number of crystal structures. In addition to the face-centered cubic and body-centered cubic structures, we also find the tetragonal, hexagonal, orthorhombic, and diamond crystal structures stable for this system. In the phase diagram, we identify multiple re-entrant melting regions and polymorphic transitions between the crystals.