Comparative studies of reactions of commercial polymers with molecular oxygen,singlet oxygen,atomic oxygen and ozone—II. Reactions with 1,2-polybutadiene

The oxidations of 1,2-polybutadiene by molecular oxygen, singlet oxygen, atomic oxygen and ozone have been studied using u.v. and i.r. spectroscopic methods. Some possible implications of the results of oxidation in the presence of singlet oxygen (parallel free radical oxidation) and atomic oxygen (formation of NO₂ and its reaction with polymer) are discussed. Crosslinking was observed during all types of oxidation. A new mechanism involving formation of free radicals has been considered in detail. During ozonization of 1,2-polybutadiene, formation of formaldehyde and formic acid were detected. An ozonization mechanism has been proposed.     

Comparative studies of reactions of commercial polymers with molecular oxygen,singlet oxygen,atomic oxygen and ozone—I. Reactions with cis-1,4-polybutadiene

The oxidation of cis-1,4-polybutadiene by molecular oxygen, singlet oxygen, atomic oxygen and ozone has been studied using u.v. and i.r. spectroscopic methods. Some possible implications of the results of oxidation in the presence of singlet oxygen (parallel free radical oxidation) and atomic oxygen (formation of NO₂ and its reaction with polymer) are discussed. Chain scission was observed during all types of oxidation. A new mechanism involving opening of double bonds and formation of biradicals has been considered in detail.     

Oxidation of fully substituted alkoxyoxazolcs with singlet molecular oxygen

Diacylcurbamatcs IV can be prepared from alkoxyoxazoles 1 by ¹O₂ oxidation. When the reaction is opportunely earried out a new heterocyclic system, namely the 3H-1, 2, 4-dioxazole III, is formed. A mechanistic interpretation of the results is suggested.     

Reactions of methylated quercetin derivatives with singlet molecular oxygen

The rate constants of the reactions of¹O₂ with 3,5,7,3′,4′-pentamethoxy-, 3-hydroxy-5,7,3′,4′-tetramethoxy-, and 5-hydroxy-3,7,3′,4′-tetramethoxyflavones in benzene were measured. The methylation of quercetin was found to result in an increase in the rate due to the enhancement of the electron-donating activity of the molecules.     

Interaction of singlet molecular oxygen with melatonin and related indoles

Singlet molecular oxygen (1O2) is one of the major agents responsible for (photo)oxidative damage in biological systems including human skin and eyes. It has been reported that the neural hormone melatonin (MLT) can abrogate 1O2-mediated cytotoxicity through its purported high antioxidant activity. We studied the interaction of MLT with 1O2 in deuterium oxide (D2O), acetonitrile and methanol by measuring the phosphorescence lifetime of 1O2 in the presence of MLT and related indoles for comparison. Rose bengal (RB) was used as the main 1O2 photosensitizer. The rate constant (kq) for the total (physical and chemical) quenching of 1O2 by MLT was determined to be 4.0 x 10(7) M(-1) s(-1) in D2O (pD 7), 6.0 x 10(7) M(-1) s(-1) in acetonitrile, and 6.1 x 10(7) M(-1) s(-1) in methanol-d1. The related indoles, tryptophan, 5-hydroxyindole, 5-methoxytryptamine, 5-hydroxytryptamine (5-OH-T, serotonin), 6-hydroxymelatonin (6-OH-MLT) and 6-chloromelatonin quenched 1O2 phosphorescence with similar kq values. We also compared the photosensitized photobleaching rate of MLT with that of other indoles, which revealed that MLT is the most sensitive to 1O2 bleaching. Hydroxylation of the indole moiety in 5-OH-T and 6-OH-MLT makes them more sensitive to photodegradation. In the absence of exogenous photosensitizers MLT itself can generate 1O2 with low quantum yield (0.1 in CH3CN) upon UV excitation. Thus, the processes we investigated may occur in the skin and eyes during physiological circadian rhythm (photo)signaling involving MLT and other indoles. Our results indicate that all the indoles studied, including MLT, are quite efficient yet very similar 1O2 quenchers. This directly shows that the exceptional antioxidant ability proposed for MLT is unsubstantiated when merely chemical mechanism(s) are considered in vivo, and it must predominantly involve humoral regulation that mobilizes other antioxidant defenses in living organisms.     

Activity of thiols as singlet molecular oxygen quenchers

Singlet molecular oxygen O2(1 delta g) arising from the thermodissociation of the endoperoxide of 3,3'-(1,4-naphthylidene) dipropionate (NDPO2) was used to assess the quenching ability of various thiols and related compounds in sodium phosphate buffer in D2O at 37 degrees C. The overall quenching ability decreases in the sequence ergothioneine, methionine, cysteine, beta,beta-dimethyl cysteine (penicillamine), mercaptopropionylglycine, mesna, glutathione (GSH), dithiothreitol, N-acetyl cysteine and captopril. Cystine, glutathione disulphide, dimesna, methionine sulphone and methionine sulphoxide have no quenching effect. Comparison of the rate constants for physical (kq) with chemical (kr) quenching by thiols indicates that chemical reactivity accounts fully for their ability to quench O2(1 delta g), and pD dependence indicates that the thiolate anion reacts with O2(1 delta g). Loss of thiol groups, as exemplified by GSH, is not affected by the free radical scavengers superoxide dismutase and mannitol. However, sodium azide, a scavenger of O2(1 delta g), completely prevents NDPO2-induced thiol depletion. Depletion of GSH by NDPO2 is accompanied by the formation of its disulphide, sulphinate, sulphonate, sulphoxide and other products.     

The fluoride ion effect in the reactions of singlet oxygen with enols

The fluoride ion effect in the reactions of enolic systems with singlet oxygen has been investigated. β-Dicarbonyl compounds yielded 1,2,3-tricarbonyl derivatives, some of which underwent further hydration, whereas α-diketones suffered oxidative decarboxylation to give open-chain aldehydo-acids or keto-acids.     

Chemiluminescence associated with singlet oxygen reactions with amino acids, peptides and proteins

Low level chemiluminescence (CL) is observed after protein oxidation mediated by singlet oxygen produced in Rose Bengal (RB) irradiation. This CL lasts for several minutes after the end of the photolysis. In this work, the mechanism of the process was assessed from the spectral characteristics of the CL and the effect of antioxidants (Trolox or ascorbate), Ebselen (a compound with peroxidase-like activity), azide (a singlet oxygen scavenger) and D2O, added prior to or after RB irradiation. It is concluded that most of the light emission is due to formation of excited states generated in the decomposition of peroxides and/or hydroperoxides accumulated during the photolysis. Experiments carried out in the presence of several amino acids (Cys, Met, His, Tyr and Trp) and di- and tripeptides suggest that peroxides (and/or hydroperoxides) of Trp residues are mainly responsible for the CL observed after singlet oxygen-mediated protein oxidation. The much weaker CL observed after the oxidation of proteins without Trp residues supports this conclusion. A comparison of the results obtained employing free Trp, Ala-Trp and Trp-Ala dipeptides, Ala-Trp-Ala tripeptide and Trp-containing proteins supports the conclusion that blocking the amino group of the Trp moiety strongly increases the efficiency of the chemiluminescent process, producing approximately 2.5x10(-8) photons per oxidized Trp group in Ala-Trp. A mechanism comprising two chemiluminescent oxidation pathways of Trp residues is proposed to explain the results.     

Recent developments in the detection of singlet oxygen with molecular spectroscopic methods

Singlet oxygen is a unique reactive oxygen species, as its chemical reactivity derives from its characteristic electronically-excited state. The involvement of singlet oxygen in many important atmospheric, physical, chemical, biological, and therapeutic processes has attracted intense research interest in recent years. The detection and the quantification of singlet oxygen are very important for understanding its mechanism of action in various processes.Due to its highly reactive nature, singlet oxygen has very few direct methods of determination. Only molecular phosphorescence at 1270 nm has been utilized. Indirect methods using spectrophotometric, fluorescent or chemiluminescent probes have therefore been extensively studied.This review reflects recent developments in singlet-oxygen detection with molecular spectroscopic methods. We begin with a brief introduction of the basic properties, the production and the applications of singlet oxygen. With this background information, we review the four molecular spectroscopic methods (i.e., emission, spectrophotometry, fluorescence and chemiluminescence). We pay special attention to attractive chemical probes with high selectivity and sensitivity in quantifying singlet oxygen.     

Water‐soluble fluorescent polymers that respond to singlet oxygen

Although acenes with more than three fused rings can both fluoresce efficiently and react with singlet oxygen (¹O₂) rapidly, their hydrophobic nature presents a challenge to their use in aqueous environments. Herein we report a series of fluorescent, water‐soluble random copolymers that each comprise (oligoethylene glycol) methacrylate (OEGMA) and one of several diarylacene methacrylates, including a tetracene methacrylate and a tetraceneothiophene methacrylate. Exposure to ¹O₂ in water oxidizes the pendant acenes, resulting in diminution of their fluorescence intensities. The observed rate of oxidation of the tetracene‐containing polymers compares favorably with a commercial ¹O₂‐sensitive dye. Polymers that also include energy‐donating coumarin side chains show ratiometric fluorescence changes in response to ¹O₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2526–2535     

Soluble polymers with pendant thionine groups: Synthesis and evaluation as singlet oxygen photosensitizers

Thionine ( 1 ) has been covalently bound to linear copoly(styrene-p-vinylbenzyl chloride) and to linear copoly(acrylic acid-2-ethylhexyl acrylate). The resulting polymeric dyes, purified by ultrafiltration, present quantum yields of singlet oxygen generation in dimethylformamide solution lower than their corresponding low-molecular-weight models thionine hydrochloride ( 1.HCl ) and N(3)-acetylthionine ( Ac-1 ), the decrease being more pronounced in the case of the polystyrene-dye photosensitizer. High chromophore concentrations within the volume encompassed by each macromolecule in the solution can explain this fall in efficiency. The free dyes thionine hydrochloride and its hydrolysis products thionoline ( 2 ) and thionol ( 3 ) behave as good singlet oxygen generators, with quantum yields of 0.71, 0.62, and 0.63, respectively. © 1993 John Wiley & Sons, Inc.     

Heterogeneous reactions of solid nickel(II) complexes

The influence of different modes of preparation on the stoichiometry of thermal decomposition of isothiocyanatonickel(II) complexes with ammonia was studied. It was found that the complex Ni(NCS)₂(NH₃)₄ (I) prepared by heterogeneous reaction undergoes decomposition in two steps (–2 NH₃, –2 NH₃), while for complex II, of the same composition but prepared by homogeneous reaction from solution, the decomposition proceeds in three steps (–1 NH₃, –1 NH₃, –2NH₃). Electronic and infrared absorption spectra were used for the study of the spectral properties of the starting complex. It was found that the different stoichiometries of thermal decompositions of complexes I and II do not cause differences in the bonding strength of the ammonia molecules (chemical factor); this effect is rather brought about by physical factors such as different imperfections of the crystal lattice.

---

Zusammenfassung Der Einfluß der Herstellung auf die Stöchiometrie der thermischen Zersetzung von Amin-Komplexen des Isothiocyanatonickels wurde studiert. Der Zerfall des Komplexes Ni(NCS)₂(NH₃)₄ (I), hergestellt durch heterogene Reaktion, verlief in zwei Etappen (–2 NH₃, –2 NH₃). Beim selben Komplex (II), hergestellt durch homogene Reaktion in Lösung, wurden jedoch drei Etappen beobachtet (–1 NH₃, –1 NH₃, –2 NH₃). Die Eigenschaften des Ausgangsproduktes wurden durch Elektronen- und IR-Spektroskopie untersucht. Das unterschiedliche thermische Verhalten ist nicht auf eine verschiedene Bindungsstärke der NH₃ Moleküle, sondern auf physikalische Ursachen, wie z. B. Unregelmässigkeiten im Kristallgitter zurückzuführen.

---

Résumé On a étudié l'influence des diverses méthodes de préparation sur la stoechiométrie de la réaction de décomposition thermique des complexes de l'isothiocyanate de nickel(II) avec l'ammoniac. On a établi que le complexe Ni(SCN)₂(NH₃)₄, (I), préparé rar réaction hétérogène, subit une décomposition en deux étapes (–2NH₃, –2NH₃), tandis que le complexe (II), de même composition, mais préparé par réaction homogène, à partir de solutions, se décompose en trois étapes (–1NH₃,–1NH₃, –2NH₃). Les propriétés spectrales du complexe initial ont été étudiées par absorption électronique et infrarouge. On a trouvé que les différences de stoechiométrie des réactions de décomposition thermique des complexes (I) et (II) n'apportaient pas de différences entre les énergies de liaison des molécules d'ammoniac (facteur chimique). C'est plutôt à des facteurs physiques, comme les différentes imperfections du réseau cristallin, que cet effet serait dû.

---

(II) . , Ni(NCS)₂(NH₃)₄ (I), , (–2NH₃,–2NH₃). , II , , (–1 NH₃,–1 NH₃ –2NH₃). . , I II ( ), , .

     

Chemistry of singlet oxygen with arylphosphines

The chemistry of singlet oxygen with a variety of arylphosphines has been studied. Rates of singlet oxygen removal by para-substituted arylphosphines show good correlation with the Hammett σ parameter (ρ=−1.53 in CDCl₃), and with the Tolman electronic parameter. The only products for the reactions of these phosphines with singlet oxygen are the corresponding phosphine oxides. Conversely, for ortho-substituted phosphines with electron-donating substituents, there are two products, namely a phosphinate formed by intramolecular insertion and phosphine oxide. Kinetic analyses demonstrate that both products are formed from the same intermediate, and this allows determination of the rate ratios for the competing pathways. Increasing the steric bulk of the phosphine leads to an increase in the amount of insertion product. VT NMR experiments show that peroxidic intermediates can only be detected for very hindered and very electron-rich arylphosphines.     

Reactions of singlet oxygen with biomolecules

Rate constants of singlet oxygen quenching by glycyrrhetic acid, glycyrrhizic acid, isoliquiritigenin, licurazide,d-glucose, andl-arabinose were determined. An increase in the quenching rate constants by more than an order of magnitude is observed on going from aglycone to the corresponding glycoside.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 57–59, January, 1996.     

Merbromin (mercurochrome)--a photosensitizer for singlet oxygen reactions.

Merbromin, produced in many countries and used world wide as an antiseptic under the trademark "mercurochrome", is shown to be an efficient sensitizer for type II (singlet oxygen) photo-oxygenations by using 2-methyl-2-butene, (+)-limonene, (+)-alpha-pinene, alpha,alpha'-dimethylstilbenes and (--)-L-methionine as oxygen acceptors. Type I photo-oxygenations are negligible. An estimate of the quantum yield of singlet oxygen formation by merbromin in methanol gives a value of about 0.1.     

Mechanism of ene reactions of singlet oxygen. A two-step no-intermediate mechanism

The mechanism of the ene reaction of singlet ((1)delta(g)) oxygen with simple alkenes is investigated by a combination of experimental isotope effects and several levels of theoretical calculations. For the reaction of 2,4-dimethyl-3-isopropyl-2-pentene, the olefinic carbons exhibit small and nearly equal (13)C isotope effects of 1.005-1.007, while the reacting methyl groups exhibit (13)C isotope effects near unity. In a novel experiment, the (13)C composition of the product is analyzed to determine the intramolecular (13)C isotope effects in the ene reaction of tetramethylethylene. The new (13)C and literature (2)H isotope effects are then used to evaluate the accuracy of theoretical calculations. RHF, CASSCF(10e, 8o), and restricted and unrestricted B3LYP calculations are each applied to the ene reaction with tetramethylethylene. Each predicts a different mechanism, but none leads to reasonable predictions of the experimental isotope effects. It is concluded that none of these calculations accurately describe the reaction. A more successful approach was to use high-level, up to CCSD(T), single-point energy calculations on a grid of B3LYP geometries. The resulting energy surface is supported by its accurate predictions of the intermolecular (13)C and (2)H isotope effects and a very good prediction of the reaction barrier. This CCSD(T)//B3LYP surface features two adjacent transition states without an intervening intermediate. This is the first experimentally supported example of such a surface and the first example of a valley-ridge inflection with significant chemical consequences.     

Photo-oxidation of polymers without light: Oxidation of polybutadiene and an ABS polyblend with singlet oxygen

In recent years much evidence has been accumulated to implicate electronically excited oxygen (¹Δ_g) molecules as the agent responsible in photosensitized oxidations for the formation of allylic hydroperoxides from olefins and of endoperoxides from 1,3-dienes. Little regarding the mechanistic aspects of the photo-oxidative degradation of polybutadiene (PBD) is known, however. To determine if electronically excited oxygen (¹Δ_g) molecules can oxidize PBD, the ABS polyblend and standard samples of PBD's containing high trans, high cis, and high vinyl content were treated in homogeneous solution at low temperature with chemically produced singlet oxygen in situ. The source of the singlet oxygen was the triphenylphosphite-ozone adduct. Studies by spectroscopy, elemental analysis, viscosity determinations, and gel measurements showed only the cis- and the trans-PBD were susceptible to oxidation; no chain scission was involved in the attack of cis- and trans-PBD by singlet oxygen; the oxidation of the cis PBD involved the initial formation of hydroperoxides which on thermal decomposition yielded gel. The trans-PBD was found to oxidize but apparently by a mechanism different from that of cis-PBD. Initial singlet oxygen attack of ABS proceeds by oxidation of the PBD portion of the polyblend. It was also observed that when only a small amount of the double bonds in the cis-PBD polymer had been oxidized to hydroperoxides, subsequent thermal treatment of this sample resulted in gross structural changes in the whole polymer.