Radical polymerization of new functional monomer: Methacryloyl isocyanate containing 4‐chloro‐1‐phenol

New functional monomer methacryloyl isocyanate containing 4‐chloro‐1‐phenol (CPHMAI) was prepared on reaction of methacryloyl isocyanate (MAI) with 4‐chloro‐1‐phenol (CPH) at low temperature and was characterized with IR, ¹H, and ¹³C‐NMR spectra. Radical polymerization of CPHMAI was studied in terms of the rate of polymerization, solvent effect, copolymerization, and thermal properties. The rate of polymerization of CPHMAI has been found to be smaller than that of styrene under the same conditions. Polar solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethyl formamide (DMF) were found to slow the polymerization. Copolymerization of CPHMAI (M₁) with styrene (M₂) in tetrahydrofuran (THF) was studied at 60°C. The monomer reactivity ratio was calculated to be r₁ = 0.49 and r₂ = 0.66 according to the method of Fineman—Ross. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 469–473, 2000     

Effects of mercaptides on anionic polymerization. II. Polymerization of acrylonitrile initiated by mercaptides

The polymerization of acrylonitrile by the several alkali metal mercaptides was investigated. The initiation reaction was found spectroscopically and by the sodium fusion method to proceed in a Michael-like form similar to a cyanoethylation reaction. From the results of the copolymerization of acrylonitrile and methyl methacrylate by the mercaptides, it was found that the mercaptides behaved as the anionic initiators. The effects of the counterions on the rate of polymerization were found to increase with increasing the electropositivites in the order of Li < Na < K. A negative overall activation energy was obtained, ?2.2 kcal/mole, in the temperature region of ?30°C to +20°C. The catalytic reactivities of the mercaptides were smaller than those of the corresponding oxygen analogs, except in the case of the phenyl substituent. Only in the case of the phenyl substituent, thiophenoxide was found to be much more effective than phenoxide, phenyl-SNa ? phenyl-ONa. The catalytic reactivities of the various sodium mercaptides were also determined to follow not only the basicities of the nucleophiles, but also the polarizabilities as follows: tert-butyl-SNa ≈ n-dodecyl-SNa > phenyl-SNa > n-octyl-SNa > isopropyl-SNa > n-propyl-SNa > ethyl-SNa. The enhanced reactivity of thiphenoxide in spite of the low pK_a value was attributed to the higher polarizability based on the low α effect.     

Synthesis and characterization of Schiff-base-containing polyamides

A series of new Schiff base polyamides（PAs） were synthesized by polycondensation of benzilbisthiosemicarbazone diamine（LH₆） with different commercially available aliphatic and aromatic diacid chlorides. The monomer and all the PAs were characterized by FTIR,¹H-NMR,and elemental analysis.The prepared polyamides showed inherent viscosities in the range of 0.30-0.36 dL/g in DMF at 25℃,indicating their moderate molecular weight.The PAs were completely soluble in aprotic polar solvents such as dimethylformamide（DMF）,N-methylpyrolidone（NMP）, tetrachloroethane（TCE）,dimthylsulfoxide（DMSO） and also in H₂SO₄ and partially soluble in THF,acetone and chloroform at room temperature.Thermal analysis showed that these PAs were practically amorphous and exhibited 10%weight loss above 220℃.     

Regeneration of polycondensation of wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in main chain

Wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in the main chains were prepared in aprotic polar solvents or m‐cresol under various reaction conditions. In the polymerization of 1,5‐diaminonaphthalene with terephthalaldehyde, the polymer that synthesized in (HMPA/DMSO) at room temperature for 24 h by adding 5 wt % of calcium chloride and a very small amount of p‐toluenesulfonic acid showed the highest reduced viscosity in all of the polymers from 1,5‐diaminonaphthalene. The reduced viscosity of poly(azomethine)s synthesized from 2,6‐diaminonaphthalene with 2,6‐diformylnaphthalene in m‐cresol and with terephthalaldehyde in HMPA/DMSO were η_red = 0.35 and 0.36, respectively. The thermal analysis showed the poly(azomethine)s had high thermal stability and the glass‐transition temperatures of these polymers are about 250 °C. The X‐ray diffraction showed that they are partially crystalline. They could be polymerized again by second stage polycondensation in polyphosphoric acid. The reduced viscosities of the obtained polymers were about 2–5 times as high as that of the pristine polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1064–1072, 2000     

Anionic polymerization of vinyl monomers with xanthates

The polymerization of vinyl monomers with various xanthates (potassium tert-butylxanthate, potassium benzylxanthate, zinc n-butylxanthate, etc.) were carried out at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, methyl vinyl ketone, and methyl methacrylate were found to undergo polymerization with potassium tert-butylxanthate; however, styrene, methyl acrylate, and acrylamide were not polymerized with this xanthate. In the anionic polymerization of methyl vinyl ketone with potassium tert-butylxanthate, the rate of the polymerization was found to be proportional to the catalyst concentration and to the square of the monomer concentration. The activation energy of methyl vinyl ketone polymerization was 2.9 kcal/mole. In the polymerization, the order of monomer reactivity was as follows: N-phenylmaleimide > methyl vinyl ketone > acrylonitrile > methyl methacrylate. The initiation ability of xanthates increased with increasing basicity of the alkoxide group and with decreasing electronegativity of the metal ion in the series, lithium, sodium, and potassium tert-butylxanthate. The relative effects of the aprotic polar solvents on the reactivity of potassium tert-butylxanthate was also determined as follows: diethylene glycol dimethyl ether > dimethylsulfoxide > hexamethylphosphoramide > dimethylformamide > tetrahydrofuran (for methyl vinyl ketone); dimethyl sulfoxide > hexamethylphosphoramide > dimethylformamide ? diethylene glycol dimethyl ether (for acrylonitrile).     

Synthesis and characterization of poly(amide sulfonamide)s (PASAs)

New diamino monomers IIa – IIg were synthesized in a two-step reaction sequence starting from p-acetamidobenzenesulfonyl chloride. Solution polymerization of these monomers in DMAC with terephthaloyl or isophthaloyl chloride resulted in the formation of a series of 14 poly(amide sulfonamide)s (PASAs) in excellent yield (> 95%). The polymers have in-trinsic viscosities of 0.32–1.11 dL g^?1. Except for polymers IIIa ? p and IIId - p , all other PASAs were readily soluble in aprotic polar solvents including DMAC, DMF, and DMSO. Thermogravimetric analyses of the polymers showed moderate thermal stability with 10% weight loss being recorded in the range of 325–408°C. In addition, these polymers exhibit moderate chemical stabilities toward alkali, acidic, and chromic acid solution. © 1995 John Wiley & Sons, Inc.     

Effect of solvent in radical polymerization of butadiene 1-carboxylic acid

The radical polymerization and copolymerization of butadiene 1-carboxylic acid (Bu-1-Acid) were studied in a variety of the electron-donor solvents such as dimethylformamide (DMF), tetrahydrofuran (THF), methyl ethyl ketone (MEK), acetonitrile (ACN), and benzene (BZ) using AIBN as an initiator at 50°C. Under these conditions, the polymerization rate of Bu-1-Acid increased in the order, DMF < THF < MEK < ACN < BZ in the various solvents. In copolymerization with styrene [M₂] and acrylonitrile [M₂], the monomer reactivity ratio r₁ increased and r₂ decreased in the same order. Moreover, it was found that Alfrey-Price Q-e value of Bu-1-Acid increased depending on solvent in the order DMF < THF < MEK < ACN < BZ. These variations were correlated to the electron-donating power (Δvcm^?) of the solvents used and are discussed on the basis of the solvation of Bu-1-Acid into the solvent. Also, it was found that the microstructures of these polymers were always trans-1,4 and did not change with the solvent used.     

Phosphorus containing polymers. III. Polyimidophosphonates

Synthesis of dihydroxybisimide monomers and their subsequent polycondensation with dichlorophenylphosphine oxide by use of a phase-transfer catalyst are reported. The monomers were characterized by melting point, elemental analysis, and IR spectroscopy. The polyimidophosphonates were characterized by viscosity measurement, molecular weight determination, elemental analysis, IR, ESCA, ¹H-NMR, ³¹P-NMR, and X-ray diffraction. Thermal stability and glass transition temperature (T_g) of the polymers were evaluated by TGA, DTA, and TMA. These polymers are self-extinguishing and readily soluble in highly polar solvents like DMF, DMSO, DMAC, NMP, HMPA, etc. © 1994 John Wiley & Sons, Inc.     

Mechanism of charge-transfer polymerization. V. Photopolymerization and photocyclodimerization of N-vinylcarbazole in the N-vinylcarbazole–oxygen–solvent system

Photochemical reactions of N-vinylcarbazole (VCZ), studied in various solvents, were profoundly influenced by the atmosphere. In the deaerated system radical polymerization of VCZ occurred in various solvents, e.g., tetrahydrofuran, acetone, ethyl methyl ketone, acetonitrile, methanol, sulfolane, N,N-dimethylformamide (DMF), or dimethyl sulfoxide (DMSO). By contrast, when dissolved oxygen was present, cyclodimerization of VCZ occurred exclusively to give trans-1,2-dicarbazole-9-yl-cyclobutane in such polar, basic solvents as acetone, ethyl methyl ketone, acetonitrile or methanol. In stronger basic solvents, i.e., sulfolane, DMF, or DMSO, simultaneous radical polymerization and cyclodimerization of VCZ proceeded, the ratio of the cyclodimerization to the radical polymerization decreasing in the order, sulfolane > DMF > DMSO. In dichloromethane, on the other hand, cationic polymerization of VCZ occurred irrespective of the atmosphere. It is suggested that oxygen acts as an electron acceptor to the excited VCZ, electron transfer occurring in polar solvents from the excited VCZ to oxygen to give transient VCZ cation radical. The effect of solvent basicity on the photocyclodimerization of VCZ is discussed.     

Effect of temperature and solvent on polymer tacticity in the free‐radical polymerization of styrene and methyl methacrylate

The effect of temperature and solvent on polymer tacticity in free‐radical polymerization of styrene and methyl methacrylate was studied by ¹³C and ¹H NMR, respectively. Polystyrene shows a mild syndiotactic tendency (P_m = 0.36 ± 0.02) that is independent of temperature over a wide range (?10 to 120 °C), while poly(methyl methacrylate) shows a stronger syndiotactic tendency (P_m = 0.17 ± 0.01 at 30 °C) that decreases as temperature is increased (P_m = 0.22 ± 0.02 at 80 °C). None of the polymerization solvents studied (bulk, THF, DMF, DMSO, acetonitrile, and acetone) had a significant effect on polymer tacticity in either system. The triad fractions of both polymers showed deviations from the Bernoulli model, implying that the antepenultimate unit affects the propagation reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3351–3358     

Kinetics and reactivity of substituted anilines with 2‐chloro‐5‐nitropyridine in dimethyl sulfoxide and dimethyl formamide

The kinetics of the reaction of substituted anilines with 2‐chloro‐5‐nitropyridine were studied in dimethyl sulfonide (DMSO) and dimethyl formamide (DMF) at different amine concentrations and temperatures in the range 45–60°C. In both solvents the reaction was not a base‐catalyzed one. A plot of ΔH^# versus ΔS^# for the reaction in DMSO and DMF gave good straight lines with isokinetic temperatures 128°C and 105°C, respectively. Good linear relationships were obtained from the plots of log k₁ against σ° values at all temperatures with negative ρ values (?1.63 to ?1.28 in DMSO) and (?1.26 to ?0.90 in DMF). © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 645–650, 2002     

Donor-Acceptor Complexes in Copolymerization. XXVI. Effect of Solvent,Temperature, and Complexing Agent on the Polymerization of Comonomer Charge Transfer Complexes

The copolymerization of styrene with methyl methacrylate (S/MMA = 4/1) or acrylonitrile (S/AN = 1/1) in the presence of ethylaluminum sesquichloride (EASC) yields 1/1 copolymer in toluene or chlorobenzene. In chloroform the S-MMA-EASC polymerization yields 60/40 copolymer while the S-AN-EASC polymerization yields 1/1 copolymer. In the presence of EASC, styrene-α-chloroacrylonitrile yields 1/1 copolymer (DMF or DMSO), S-AN yields 1/1 copolymer (DMSO) or radical copolymer (DMF), S-MMA yields radical copolymer (DMF or DMSO), α-methylstyrene-AN yields radical copolymer (DMSO) or traces of copolymer (DMF), and α-MS-methacrylo-nitrile yields traces of copolymer (DMSO) or no copolymer (DMF). When zinc chloride is used as complexing agent in DMF or DMSO, none of the monomer pairs undergoes polymerization. However, radical catalyzed polymerization of isoprene-AN-ZnCl₂ in DMF yields 1/1 alternating copolymer. The copolymerization of S/MMA in the presence of EASC yields 1/1 alternating copolymer up to 100°C, while the copolymerization of S/AN deviates from 1/1 alternating copolymer above 50°C. The copolymerization of S/MMA deviates from 1/1 copolymer at MMA/EASC mole ratios above 20 while the copolymerization of S/AN deviates from 1/1 copolymer at MMA/EASC ratios above 50.     

The charge-transfer polymerization of nitroethylene in electron-donating solvents

The anionic polymerization of nitroethylene was studied in N,N-dimethylformamide (DMF) and in dimethyl sulfoxide (DMSO) at 0–40°C. The polymerization proceeds spontaneously when monomer is mixed with solvent in the absence of light. From the observed results of the rate of polymerization, the molecular weight of polymer, the effects of additives and solvents, the copolymerization with acrylonitrile, and the optical absorption spectra it is concluded that the polymerization is initiated by the nitroethylene radical anion generated by the slow dissociation of the electron donor–acceptor (EDA) complexes between the solvent molecule and the monomer. The activation energy for the rate of polymerization was 50 and 29 kJ/mole in DMF and DMSO, respectively, which seems to be determined primarily by the dissociation of the EDA complexes. The significant features of this polymerization are that the initiation proceeds slowly and there is essentially no termination.     

Comparative study of the absolute reactivity of vinyl monomers: Kinetics of polymerization of vinyl monomers initiated by Mn3+–thiodiglycolic acid redox system

The kinetics and mechanism of polymerization of methacrylic acid (MAA) and ethyl acrylate (EA) initiated by the redox system, Mn³⁺–thiodiglycolic acid (TDGA) were investigated in the 15–35°C temperature range. The polymerization kinetics of both the monomers followed the same mechanism, viz., initiation by primary radical and termination by Mn³⁺–thiodiglycolic acid complex. The rate coefficients k_i/k₀ and k_p/k_t were related to the monomer reactivity and polymer radical reactivity, respectively. It was observed that both monomer reactivity and polymer radical reactivity followed the same order, viz., EA > MAA. The polymer radical reactivity varied inversely with the Q values of the monomers.     

Thermodynamic study of complex formation between dibenzo-18-crown-6 and UO2 2+ cation in different non-aqueous binary solutions

In the present work the complexation process between UO₂ ²⁺ cation and the macrocyclic ligand, dibenzo-18-crown-6 (DB18C6) was studied in ethylacetate–dimethylformamide (EtOAc/DMF), ethylacetate–acetonitrile (EtOAc/AN), and ethylacetate–tetrahydrofuran (EtOAc/THF) and ethylacetate–propylencarbonate (EtOAc/PC) binary solutions at different temperatures using the conductometric method. The results show that the stoichiometry of the (DB18C6 . UO₂)²⁺ complex in all binary mixed solvents is 1:1. A non-linear behavior was observed for changes of log K_f of this complex versus the composition of the binary mixed solvents. The stability constant of (DB18C6 . UO₂)²⁺ complex in various neat solvents at 25 °C decreases in order: THF > EtOAc > PC > AN > DMF, and in the binary solvents at 25 °C is: THF–EtOAc > PC–EtOAc > DMF–EtOAc ≈ AN–EtOAc. The values of thermodynamic quantities (?H°_c, ?S°_c) for formation of this complex in the different binary solutions were obtained from temperature dependence of its stability constant and the results show that the thermodynamics of complexation reaction between UO₂ ²⁺ cation and DB18C6 is affected strongly by the nature and composition of the mixed solvents.     

Amine-quinone polyurethanes. I. Preparation of polyurethane block copolymers containing 2,5–bis(N-2-hydroxyethyl-N-methylamino)-1,4–benzoquinone diol monomer

The amine-quinone monomer, 2,5–bis(N-2-hydroxyethyl-N-methylamino)-1,4-benzoqui-none (AQM-1), was prepared by the multiple-step condensation of 2-(N-methylam-ino)ethanol with benzoquinone in the presence of oxygen. This crystalline monomer was used to prepare a series of amine-quinone polyurethanes by condensation polymerization, either in the melt or in solution (THF or DMF), with a diisocyanate (MDI, TDI, or IPDI) and an oligomeric diol [poly(caprolactone) or poly(1,2-butylene glycol)]. The amine-quinone functional group was stable under the polymerization conditions, and was incorporated into the main chain, giving red-brown polyurethanes that had molecular weights in the range of 11,000–90,000 and were soluble in THF, MEK, DMF, and DMSO. The thermal properties were consistent with a two-phase morphology with an amorphous soft segment, containing the oligomeric diol, and a microcrystalline hard segment, containing AQM-1. The polymers having a low hard segment content (<50%) were rubbery (soft segment T_g <?25°C); polymers having a high hard segment content (>50%) were thermoplastic (hard segment T_g>150°C). © 1995 John Wiley & Sons, Inc.     

Charge-transfer polymerization of butyl methacrylate

Butyl methacrylate (BuMA) can be polymerized by charge-transfer complexes formed by the interaction of ethanolamine (EA), BuMA, and carbon tetrachloride (CCl₄) in a non-aqueous solvent, such as N,N-dimethylformamide (DMF) or dimethyl sulfoxide (DMSO). The rate of polymerizationR _p is found to be linear with [BuMA] and proportional to both [CCl₄]^0.5 and [EA]^0.5 when [CCl₄]/[EA]≤1.R _p becomes independent of [CCl₄] when [CCl₄]/[EA]>1.R _p is proportional to [EA]^0.56 and to [BuMA]^1.30 when [CCl₄]>[EA]. The average rate constant at 30°C for the polymerization of BuMA in terms of monomer was 3.32×10⁻⁶ s⁻¹ when [CCl₄]/[EA]≤1, and 5.47×10⁻⁶ L/(mol s) when [CCl₄]/[EA]>1.     

Novel Copolymers of 4-Fluorostyrene. 3. Some Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH=C(CN)₂ (where R is 4-dimethylamino, 4-diethylamino, 3-phenoxy, 3-benzyloxy, 4-benzyloxy, 4-acetoxy, 2-cyano, 3-cyano, and 4-cyano) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-benzyloxy (2.9) > 4-cyano (2.7) > 3-phenoxy (1.9) > 4-acetoxy (1.8) > 3-cyano (1.7) > 2-cyano (1.6) > 4-benzyloxy (0.6) > 4-dimethylamino (0.4) = 4-diethylamino (0.4). High T _g of the copolymers, in comparison with that of poly (4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposition in 400–800°C range.     

Polymerization of vinyl monomers with salts of bronsted acids

The polymerization of vinyl monomers (N-phenylmaleimide, acrylamide, acrylonitrile, methyl vinyl ketone, methyl methacrylate, vinyl chloride, and styrene) with sodium salts of Brønsted acids (sodium cyanide, sodium nitrite, sodium hydroxide, etc.) were investigated at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, and methyl vinyl ketone were found to undergo polymerization with sodium cyanide, however the other monomers were not polymerized with this salt. In the polymerizations of acrylonitrile and N-phenylmaleimide with sodium cyanide, the rates of the polymerizations were found to be proportinal to the initiator concentration and to the square of the monomer concentration. The activation energy of acrylonitrile polymerization was 3.7 kcal/mole, and that of N-phenylmaleimide ws 3.0 kcal/mole. The results of the copolymerization of acrylonitrile with methyl methacrylate at 0°C in dimethyl-formamide with sodium cyanide confirm that these polymerizations proceeded by an anionic mechanism initiated by the Michael addition reaction of the monomers with the salts. In these polymerizations, the monomer reactivity increased with increase in the e values. The initiation ability of sodium salts increased with increasing pK_a of the conjugate acids and with decreasing electronegativity of metal ion in the series of lithium, sodium, and potassium cyanide. The polymerizations took place only in aprotic polar solvents, and did not occur in weak polar solvents and in protonic solvents.     

Viscosity behavior of polyelectrolyte copolymers containing sulfonate groups in mixed organic solvents

Copolymerization of 2-acrylamido-2-methylpropane sulfonic acid (AMPS, monomer 1) with 2-hydropropyl methacrylate (HPM, monomer 2) was conducted in ethylene glycol/water (1 : 1 in weight) at 70°C. The reactivity ratios estimated from the copolymer composition at low conversion are r₁ = 2.31 ± 0.25 and r₂ = 11.70 ± 1.05. The azeotropic composition was found at the monomer mole ratio AMPS/HPM equal to 8/2. Viscosity of these copolymers was measured in dimethyl sulfoxide (DMSO) and DMSO/tetrahydrofuran (THF) mixed solvent at 25 ± 0.05°C. Polyelectrolyte behavior was observed for all the copolymers, even in the mixed solvent containing 65 wt % of THF. The reduced viscosity at constant polymer concentration decreased with increasing THF content in the mixed solvent. The copolymers having AMPS repeat units more than 42 mol % precipitated in the mixed solvent when the THF was beyond 68 wt %. The viscosity reduction and precipitation in the copolymer solutions with increasing THF can be attributed to the dipole–dipole attraction between ion-pairs formed in less-polar medium. This is helpful in understanding the volume phase transition in highly charged hydrogels caused by mixing solvents. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1433–1438, 1997