Investigation and radiometric determination of saturated and unsaturated aliphatic dicarboxylic acids

Radiometric determination of saturated and unsaturated aliphatic dicarboxylic acids has been developed using a precipitation reaction. The influence of the conditions of precipitation, the composition of the calcium salts of the acids, thepH, and the composition of solvent mixtures were investigated. The solubility of the calcium salts diminished with an increase of the ethanol content in weakly alkaline medium. Linear relations were found between the solubilities of the calcium salts and the dielectric constants of the solvent mixtures. The calcium salts have poor solubilities atpH 9 in 20% aqueous ethanol containing ammonia. The radiometric titrations were carried out in 0.05M solutions, using 0.05M ⁴⁵Ca-labelled CaCl₂ solution in 20% aqueous ethanol. The titrations were done in an apparatus suitable for the detection of soft β-emitting isotopes.     

Volumetric properties of dilute aqueous solutions of cobalt amine type salts. Part 2. Densities at 15 and 5°C

Apparent molar volumes have been determined by density measurements of aqueous solutions for a series of salts [Co(L)₃]X₃, where X=Cl^– and Br^– and L¹=1,2-diaminoethane (en), L²=1,2-diaminopropane (pn) and L³=1,3-diaminopropane (tn) at 15°C and 5°C. Apparent molar volumes at infinite dilution for the complex cations at 0°C are estimated. The resulting values are related to the structure of solvent water molecules around the ions.     

STEREOSELECTIVITY OF ELECTRON TRANSFER REACTIONS (II); REACTION OF Λ-[Co(EDDS)]− AND Co(II) COMPLEXES WITH STEREOSPECIFIC DIAMINE LIGANDS

Abstract

Stereoselective electron-transfer between optically active Λ-[Co(EDDS)]^? and [Co(diamine)₃]²⁺ (diamine = racemic-1,2-diaminopropane (pn); R-1,2-diaminopropane (R-pn)) have been investigated in aqueous and in DMSO solutions. In aqueous solution, the reaction between Λ-[Co(EEDS)]^? and [Co(pn)₃]²⁺ produces four conformational isomers of the [Co(pn)₃]³⁺ complex which have the Λ-forms in excess. Their optical purities are increased ob₃>lelob₂> lel₂ob> lel₃ . In contrast, the reaction in DMSO results in more δ isomers than Λ and the sequence of optical purities are in reversed order.

The reaction between Λ-[Co(EDDS)]^? and [Co(R-pn)₃]²⁺ in aqueous solution produces two conformational isomers of [Co(R-pn)₃]³⁺; their absolute configurations are identified as δ-lel₂ob and Λ-ob₃ . In DMSO, in contrast, the reaction produces only one isomer which is identified as δ-lel₂ob.     

Ion-pairing and optical activity of diastereomeric zinc(II) 1, 10-phenanthroline,S-valinate systems

A series of S-valinatobis(1, 10-phenanthroline)zinc salts in methanolic solution have been prepared and their conductivities and ORD spectra measured. A positive linear correlation of optical rotation with conductance was found for salts of non-chelating counter anions. From the application of the Yoe-Jones method on the system Zn, phen, S-val^?, Cl^? it was concluded that the counter anion dependence of the optical activity is connected mainly with heterocyclic ligand counter anion exchange equilibria.     

Effect of structural variations of dibenzocrown ether resins and their acyclic analogues upon ion-pair sorption of alkali metal salts from aqueous and aqueous methanol solutions

Abstract

Ion-pair sorption of alkali metal salts from aqueous and aqueous methanol solutions by acyclic and cyclic dibenzopolyether resins possessing different side arm groups such as hydroxy, methoxy and carboxy has been investigated. The results reveal that both sorption selectivity and efficiency are influenced by: (1) the methanol content of the aqueous sample solution; (2) the acyclic or cyclic nature of the polyether unit; (3) the conformational positioning of the side arm group with respect to the crown ether cavity; and (4) the identity of the counteranion species of the alkali metal salt. For sym-(C₃H₇)(R′)dibenzo-16-crown-5 resins, the sorption selectivity and efficiency increased as the R′ group was varied: -OCH₃ < -OH < -OCH₂CO₂H. The highest sorption efficiency and Na⁺ selectivity was obtained for sym-(propyl)dibenzo-16-crown-5-oxyacetic acid resin (7) in which the pendent carboxylic acid group is oriented over the crown ether cavity. The use of a less hydrated anion in the alkali metal salt species enhances the ion-pair efficiency: SO₄ ^2- < NO₃ ^?, Cl^?, Br^? < I^? < SCN^?. Monovalent metal selective sorption was noted for competitive ion-pair sorption of NaCl, KCl, MgCl₂ and CaCl₂ by resin 7.     

Reaction of tetramethyl-1,2-dioxetane with triphenylphosphine: Activation parameters for the formation of 2,2-dihydro-4,4,5,5-tetramethyl-2,2,2-triphenyl-1,3,2-dioxaphospholane

The reaction of tetramethyl-1,2-dioxetane ( 1 ) and triphenylphosphine ( 2 ) in benzene-d₆ produced 2,2-dihydro-4,4,5,5-tetramethyl-2,2,2-triphenyl-1,3,2-dioxaphospholane ( 3 ) in ?90% yield over the temperature range of 6–60°. Pinacolone and triphenylphosphine oxide ( 4 ) were the major side products [additionally acetone (from thermolysis of 1 ) and tetramethyloxirane ( 5 ) were noted at the higher temperatures]. Thermal decomposition of 3 produced only 4 and 5 . Kinetic studies were carried out by the chemiluminescence method. The rate of phosphorane was found to be first order with respect to each reagent. The activation parameters for the reaction of 1 and 2 were: Ea ? 9.8 ± 0.6 kcal/mole; ΔS^≠ = ?28 eu; k_30° = 1.8 m^?1sec^?1 (range = 10–60°). Preliminary results for the reaction of 1 and tris (p-chlorophenyl)phosphine were: Ea ? 11 kcal/mole, ΔS^≠ = ?24 eu, k_30° = 1.3 M^?1sec^?1 while those for the reaction of 1 and tris(p-anisyl)phosphine were: Ea ? 8.6 kcal/mole, ΔS^≠ = ?29 eu, k_30° = 4.9 M^?1 sec^?1.     

Synthesis and crystal structure of a layered cobalt phosphate with a racemic 1,2-Diaminopropane template

A novel layered cobalt phosphate with racemic 1,2-diaminopropane as the templating agent, [CH₂(NH₃)-CH(NH₃)CH₃] [CoPO₄]₂, has been synthesized and structurally characterized by single-crystal X-ray diffraction methods. The compound crystallizes in the monoclinic system, space group P2₁/c with a = 10.457(2), b = 7.849(1), c = 6.692(l)?Å, β = 103.30(1)°, V = 534.5(2)?ų, Z = 2. The interaction of cobalt phosphate anionic layers and doubly protonated 1,2-diaminopropane cations is mainly ionic. The crystal structure is stabilized by a hydrogen bonding network between layers and templating cations.     

Synthesis and characterization of μ-oxamido copper(Ⅱ)-iron(Ⅱ) heterobinuclear complexes with an antiferromagnetic exchange interaction

Four new u-oxamido heterobinuclear complexes have been synthesized and identified as [Cu(oxap)Fe(L)2]SO4, where oxap denotes the N, N'-bis(2-aminopropyl)oxamido dianion and L represents diaminoethane (en); 1,3-diaminopropane (pn); 1,2-diaminopropane (ap) and 2,9-dimethyl-1,10-phenanthroline (Me2-phen). Based on the elemental analyses, spectroscopic studies, magnetic moments (at room temperature) and molar conductivity measurements, extended oxamido-bridged structures consisting of a copper(Ⅱ) and an iron(Ⅱ) ions, which have a square planar environment and an octahedral environment, respectively, are proposed for these complexes. Complexes [Cu(oxap)Fe(en)2]SO4 (1) and [Cu(oxap)Fe(pn)2]SO4 (2) have been characterized by variable temperature magnetic susceptibility (4.2~300 K) and the observed data were least-squares fitted to the susceptibility equation derived from the spin Hamiltonian including single-ion zero-field interaction for the iron(Ⅱ) ion, H=-2JS1.S2-DSzl2, giving the exchange integrals J=-2     

The constitution of the grignard reagent : VIII. The structure of complexes between ethylmagnesium bromide and 1-ethoxy-2-methylbutane

From measurements of the degree of association and of the optical rotation of solutions of ethylmagnesium bromide in (+)(S)-1-ethoxy-2-methylbutane [(+)-(S)-L] and benzene it is concluded that these solutions contain the species EtMgBr·2L (I), (EtMgBr)₂·3L (III) and (EtMgBr·L)₂ (II) which have molecular rotations [M]²⁵_D of 3.79°, 5.92° and 4.26° respectively. Equilibrium constants of 103 mole/l and 1.41 mole/l at 25° were calculated for the equilibria between these species.     

Synthesis and crystal structure of the layered cobalt phosphate with racemic 1,2-diaminopropane template

A novel layered cobalt phosphate with a racemic 1,2-diaminopropane templating agent, [CH₂(NH₃)CH(NH₃)-CH₃][CoPO₄]₂, has been synthesized and structurally characterized by single crystal X-ray diffraction. The compound crystallizes in the monoclinic system, space group P2₁/c with a = 10.457(2), b = 7.849(1), c = 6.692(1)?Å, β = 103.30(1)°, V = 534.5(2)?ų, Z = 2. The combination of cobalt phosphate anion layers and doubly protonated cationic 1,2-diaminopropane templates is mainly through ionic bonding. The crystal structure is stabilized by a network of hydrogen bonds between layers and templating agents.     

Application of Bender's salts to the synthesis of S-vinyl-O-tert-alkylthiocarbonates

Three thermally labile Bender's salts were synthesized and utilized to effect quantitative S_N2 displacement of primary halides to form tert-alkylthiocarbonate derivatives. Selective displacement of bromide from 1,2-bromochloroethane by either VI or VII followed by dehydrohalogenation with potassium tert-butoxide yielded S-vinyl-O-tert-butylthiocarbonate (I) and S-vinyl-O-tert-amylthiocarbonate (X), two excellent vinyl monomer precursors for polymercaptan, in 62 and 51% yield, respectively. Reaction of VI with vinylbenzyl chloride yielded S-(vinylbenzyl)-O-tert-butylthiocarbonate which polymerized in the presence of free radical initiators to produce a poly(vinylbenzyl mercaptan) precursor. Dilatometric studies of the homopolymerization of I demonstrated that the polymerization rate was proportional to [I]^0.765 and [M]^1.7, respectively; the monomer exhibited a high chain transfer constant (C_M = 3.9 × 10^?3).     

Polymerization of N-vinylcarbazole by transition metal salts

The polymerization of N-vinylcarbazole (NVC) in the presence of transition metal salts such as WCI₆, MoCI₅, TaCl₅ and NbCl₅ under different reaction conditions was studied. In general, aromatic solvents were found to be superior to aliphatic solvents in the polymerization of NVC, i. e., both conversion and molecular weight were higher in aromatic solvents. It was observed that the polymerization reaction proceeds rapidly and almost quantitatively, even at low monomer concentration (< 5 × 10^?2M) and at low catalyst to monomer mole ratio (10^?5) in aromatic solvents. The copolymerization of NVC with acenaphthylene (ACN) was also investigated in solution at room temperature. The resulting homo- and copolymer were characterized by IR, NMR, x-ray diffraction, and elemental analysis. Thermal and photophysical properties are also reported. From the spectral data, the polymerization solvent was found to have a strong influence upon the polymer stereoregularity.     

High-molecular-weight hydrolyzed polyacrylamides. I. Characterization. Effect of salts on the conformational properties

The effect of ionization (α) and added salts (NaCl, CaCl₂, MgCl₂) on the dimensions of commercially available high-molecular-weight polyacrylamides (M _w ? 4 × 10⁶), hydrolyzed at various extents (0.04 < τ < 0.49) and which have been characterized, was investigated by viscosity and light-scattering measurements performed at 25°C. The data point with evidence to the strong dependence of the chain dimensions on the charge density (ατ) and the effect of the nature and concentration of added salts. From a practical point of view it is shown that there is no advantage to using too highly hydrolyzed samples (τ > 0.45) in media containing large amounts of salts that lead to precipitation of polymers, especially in the presence of divalent ions.     

Synthesis and characterization of a novel polymer based on anthracene moiety for organic thin film transistor

We have designed and synthesized a new polymer, which could be used in the organic thin film transistor (OTFT). Poly[2,6‐bis(3′‐dodecythiophene‐2′‐yl)anthracene] (PDTAn), which is composed with anthracene moiety and dodecyl alkyl thiophene, was synthesized by oxidative polymerization using iron (III) chloride. The mole ratio of FeCl₃ and monomer (4.2:1), keeping low temperature during the initiation reaction, amount of solvent, and dropping order were very important for oxidative polymerization without crosslinking. The molecular weight of the polymer (M_w) was measured to be 40,000 with 2.85 of polydispersity index by GPC. The physical and optical properties of the polymer were characterized by differential scanning calorimetry (DSC), cyclic voltammetry (CV), and optical absorption and photoluminescence (PL) spectroscopy. A field‐effect mobility of 1.1 × 10^?4 cm² V^?1 S^?1, a current on/off ratio of 10⁵, and the V_th at ?15.2 V had been obtained for OTFTs using this polymer semiconductor by solution coating. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5115–5122, 2008     

Investigation and radiometric determination of saturated and unsaturated aliphatic monocarboxylic acids and aromatic dicarboxylic acids

Investigations have been carried out on the precipitation of calcium salts of saturated and unsaturated aliphatic monocarboxylic acids and of aromatic dicarboxylic acids. The optimum ethanol/water solvent ratio has been studied at which the sodium, ammonium or triethylammonium salts of the acids have a good solubility, whereas the calcium salts are poorly soluble and can be precipitated. Based on these investigations the radiometric determination of formic acid, palmitic acid, stearic acid, methacrylic acid, oleic acid, and o-, m- and p-phthalic acids has become possible. A linear correlation has been found between the solubilities of the calcium salts of o-, m- and p-phthalic acids and the dielectric constant of the solvent mixture. CaCl₂ solution labelled with⁴⁵CaCl₂ was used for the titrations, with a solvent composition identical to that of the solution to be titrated. Radiometric titrations were carried out in 0.05M solutions for dicarboxylic acids, and in 0.1M solutions for monocarboxylic acids. For palmitic and stearic acids titrations were also carried out in the 0.01M concentration range. The equipment used for titrations was capable of detecting isotopes of soft β-radiation.     

Persulfate-initiated polymerization of acrylamide

A dilatometric technique was used to obtain conversion–time data for the polymerization of acrylamide initiated by potassium persulfate in water. The results are summarized by the empirical rate expression, ?d[M₁]/dt = R_p = k_1.25[K₂S₂O₈]^0.5[M₁]^1.25, and k_1.25 = 1.70 × 10¹¹ exp {?16,900/RT} 1.^0.75/mole^?0.75-min. Persulfate was varied over the range 9.5 × 10^?4 to 5.2 × 10^×2 mole/l., and initial monomer concentration [M₁] was varied from 0.05 to 0.4 mole/l. The temperature range was 30?50°C. Results of analysis of the kinetics and energetics of the polymerization favor a cage-effect theory rather than a complex-formation theory to explain the order with respect to monomer.     

Cyanidosilicates—Synthesis and Structure

Starting from fluoridosilicate precursors in neat cyanotrimethylsilane, Me₃Si?CN, a series of different ammonium salts [R₃NMe]⁺ (R=Et, ⁿPr, ⁿBu) with the novel [SiF(CN)₅]^2? and [Si(CN)₆]^2? dianions was synthesized in facile, temperature controlled F^?/CN^? exchange reactions. Utilizing decomposable, non‐innocent cations, such as [R₃NH]⁺, it was possible to generate metal salts of the type M₂[Si(CN)₆] (M⁺=Li⁺, K⁺) via neutralization reactions with the corresponding metal hydroxides. The ionic liquid [BMIm]₂[Si(CN)₆] (m.p.=72 °C, BMIm=1‐butyl‐3‐methylimidazolium) was obtained by a salt metathesis reaction. All the synthesized salts could be isolated in good yields and were fully characterized.     

Ethyl­ammonium and diethyl­ammonium salts of chloranilic acid

In the crystals of two title salts of chloranilic acid (2,5‐di­chloro‐3,6‐di­hydroxy‐p‐benzo­quinone), namely ethyl­ammonium chloranilate, C₂H₈N⁺·C₆HCl₂O₄^?, (I), and diethyl­ammonium chloranilate, C₄H₁₂N⁺·C₆HCl₂O₄^?, (II), the chloranilate ions are present as a hydrogen‐bonded dimer which has an inversion center. The ethyl­ammonium and diethyl­ammonium ions link the dimers through N—H?O hydrogen bonds, forming a three‐dimensional hydrogen‐bond network in (I) and a one‐dimensional chain in (II).     

Effects of composition on the solution properties of styrene–acrylonitrile copolymers

Short-range interactions between chain units of random copolymers in solution may be influenced by the composition or precisely by the distribution of sequence lengths of the same monomer units. Steric factors were derived for random copolymers of styrene and acrylonitrile with different compositions from the relation between the limiting viscosity number and the molecular weight. Mark-Houwink relations were obtained in methyl ethyl ketone (MEK) or in N,N′-dimethylformamide (DMF) at 30°C. for random copolymers containing 0.383 (Co-1) and 0.626 (Co-2) mole fraction of acrylonitrile, the expressions are: [η] = 3.6 X 10^?4 M _w^0.62, for Co-1 in MEK; [η] = 5.3 X 10^?4 M _w^0.61, for Co-2 in MEK; [η] = 1.2 × 10^?4M _w^0.77 for Co-2 in DMF. With the Stockmayer-Fixman expression, these correlations become, respectively: [η]/M^1/2 = 1.24 × 10^?3 + 8.0 × 10^?7 M^1/2; and [η]/M^1/2 = 1.70 × 10^?3 + 6.3 × 10^?7 M^1/2; and [η]/M^1/2 = 1.68 × 10^?3 + 31.3 × 10^?7 M^1/2. From the unperturbed mean-square end-to-end distances, 〈L²〉₀, determined from the first terms of the latter expressions, together with 〈L²〉_0f calculated by assuming the completely free rotation, gives the steric factor σ = (〈L²〉₀/〈L²〉_0f)^1/2 as 2.25 ± 0.05 for Co-1, and 2.31 ± 0.10 for Co-2. These values of σ are close to those for polystyrene (σ = 2.22 ± 0.05) and for polyacrylonitrile (σ = 2.20 ± 0.05). Therefore, it is concluded that the dimensions of random copolymers of styrene and acrylonitrile in solution are not significantly influenced by the composition. In other words, the unperturbed dimensions are not affected by a change in the alternation tendency between styrene units with phenyl side groups having a large molar volume and acrylonitrile units with nitrile groups responsible for the electrostatic interactions. On the other hand, the long-range interactions reflect the effect of sequence length. The Huggins constant and the second virial coefficient obtained from the light-scattering measurements have optimum values at about 0.5 mole fraction of acrylonitrile, where the greatest tendency for alternation seems to exist.     

Comparison between various Keggin and Wells–Dawson sandwich‐type polyoxometalates in catalytic oxidation of cyclooctene and cyclohexene with hydrogen peroxide

The catalytic performance of tetra‐n‐butylammonium salts of Keggin and Wells–Dawson sandwich‐type polyoxotungstates, [M₄(PW₉O₃₄)₂]^m? and [M₄(P₂W₁₅O₅₆)₂]^n? (M = Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺), in the oxidation of cyclooctene and cyclohexene with 30% hydrogen peroxide under various conditions was investigated. In comparison, Wells–Dawson sandwich‐type polyoxometalates were found to be less active than Keggin ones. In both of them, those containing Zn and Fe gave higher conversions for different oxidation conditions. These catalysts showed very good reusability in the oxidation reaction. Copyright © 2014 John Wiley & Sons, Ltd.