Energy transfer processes involving ultraviolet stabilizers. Quenching of singlet oxygen

The role of electronically excited singlet (¹Δ_g) oxygen molecules in the photooxidation of polymers has received increased attention in recent years. Little information regarding the interaction of ultraviolet stabilizers with singlet oxygen is known, however. In this study, singlet oxygen was produced by a microwave discharge in a flow system and rate constants were obtained for quenching by ultraviolet stabilizers. It was found that some nickel chelate stabilizers are effective quenchers of singlet oxygen and their quenching behaviors can be correlated with ultraviolet stabilization effectiveness in thin polypropylene and polyethylene films. The best oxygen quenchers of those examined are nickel chelates with sulfur donor ligands.     

Effects of pulsed low-frequency electromagnetic fields on water characterized by light scattering techniques: role of bubbles

Well-characterized purified water was exposed for 6 h to pulsed low-frequency weak electromagnetic fields. After various time periods, nondegassed and degassed water samples were analyzed by static light scattering. Just after electromagnetic exposure (day 0), a reduction of over 20% in the maximum light scattering intensity at 488 nm wavelength in both nondegassed and degassed samples was observed. By contrast, on day 12 the difference was observed only in nondegassed water samples. The latter effect was attributed to the different geometries of the containers combined with the basic origin of the whole phenomenon due to gas bubbles present in water. By the use of dynamic light scattering, the bubble mean diameter was estimated to be around 300 nm. Our results suggest that the electromagnetic exposure acts on gas nanobubbles present in water and emphasizes the role of the gas/liquid interface. The possibility that exposure to electromagnetic fields disturbs the ionic double layer that contributes to bubble stabilization in water is discussed.     

Preparation of ion-exchange fiber from polypropylene waste with grafted polyacrylic acid

A procedure was developed for preparing weakly acidic cation exchanger from polypropylene fiber wastes by grafting of acrylic acid to the preoxidized surface of the fiber in an aqueous solution.     

Mechanism of stabilization of polypropylene by ultraviolet absorbers

The ultraviolet screening properties of 2-hydroxyphenylbenzotriazoles and 2-hydroxybenzophenones in polypropylene film were investigated by using photochemical and spectroscopic techniques. The effect of light screening on polymer photostability was examined by using filter solutions, and the fraction of ultraviolet light absorbed by stabilized film was calculated and compared to flexural failure times. It was found that the 2-hydroxyphenylbenzotriazoles behave primarily as screeners of ultraviolet light whereas the 2-hydroxybenzophenones are both screeners and excited-state quenchers. The quenching characteristics of the latter have not been isolated and mechanistically examined, but it is probably similar in nature to that of the nickel chelate stabilizers.     

Mechanism of inhibition by copper stearate of the photo-degradation of polyolefins

The effect of a series of transition metal (Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn) stearates in retarding the photo-degradation of isotactic polypropylene has been examined and it has been found that the results obtained are quite similar to those for high density polyethylene.Infra-red spectral analysis of the polyethylene and isotactic polypropylene films showed that, in the early stages of the photo-irradiation, photo-chemical reaction of the copper stearate took place in the films to change its structure and that rapid formation of terminal unsaturation occurred only in the films containing copper stearate. The results obtained suggest that the copper stearate provides a radical scavenging function, as well as an ultraviolet light absorbing function, to protect the polymers against photo-degradation.     

Modelization of photocatalyzed oxidation of polyolefins. II. ZnO and TiO2 photocatalyzed decomposition of tert-butyl hydroperoxide and atactic polypropylene hydroperoxides

Direct evidence of the TiO₂ and ZnO photocatalytic decomposition of tert-butyl hydroperoxide and atactic polypropylene hydroperoxides in solution is reported. Molecular and macromolecular hydroperoxides behaved similarly. Untreated TiO₂ in the rutile form was a far more efficient photocatalyst than ZnO in solution; the photoactivities of both pigments were limited on preferential absorption sites. In the solid state no preferential reaction sites were observed. When added to preoxidized atactic polypropylene both pigments were photocatalysts of the formation of macromolecular hydroperoxides and of their decomposition. The photoreactivities of untreated TiO₂ and ZnO varied less than in solution.     

Photo-stabilising action of metal chelates in polypropylene—Part IV: Influence of metal stearates in an exchange mechanism

The effect of calcium and nickel stearates on the photo-stabilising action and photo-decomposition of one calcium and two nickel metal chelates in polypropylene has been examined using infra-red and ultraviolet derivative spectroscopy. Whereas the presence of calcium stearate antagonises the photo-stabilising action of one nickel chelate, Irgastab 2002, it strongly synergises with the other, Cyasorb UV 1084. The presence of nickel stearate synergises with the calcium chelate, Irganox 1425, in unprocessed polymer whereas, in processed polymer, it exhibits antagonism. Rates of photo-decomposition of the metal chelates are also affected by metal stearates. The data suggests that, with these nickel chelates, there might be some degree of metal exchange with certain metal stearates.     

Photo-stabilising action of metal chelate stabilisers in polypropylene—Part VI: Importance of singlet (1Δg) oxygen quenching and UV screening,and flash photolysis studies

The importance of singlet (¹Δ_g) oxygen quenching in the stabilisation mechanism of polypropylene by metal chelates has been investigated. Methylene blue was used as the sensitiser and 9,10-dimethyl anthracene was used as a singlet oxygen chemical trap. The results show that singlet oxygen quenching has no important rôle in the stabilising mechanism of metal chelates, in a polypropylene matrix.The importance of ultraviolet screening by the chelates as a stabilising mechanism is also considered. Various concentration levels, ranging from 0·001% to 1·0% w/w, were used. The results show that, as in the case of singlet oxygen quenching, ultraviolet screening is unimportant as an effective photo-stabilising mechanism.The photo-stability of four nickel chelates in both polar and non-polar solvents has been examined using conventional flash photolysis. It is found that their activity correlates with their ability to protect the polymer at concentrations below 0·2% w/w. The radicals formed during flash photolysis are tentatively assigned to be phenoxy radicals.     

Photo-degradation and photo-oxidation of polyolefins: Importance of oxygen-polymer charge transfer complexes

The effect of prior irradiation (λ's > 300 nm) in an inert atmosphere on the subsequent photo-oxidative stabilities of polypropylene and low density polyethylene films has been examined using luminescence, infra-red and ultraviolet absorption techniques. Prior prolonged irradiation in an inert atmosphere of nitrogen was found to have no significant effect on the subsequent rates of photo-oxidation of the polymer films. The importance of oxygen-polymer charge transfer complexes in initiating photo-oxidation of the polymers is discussed in relation to the behaviour of other major photo-initiators such as carbonyl/unsaturated carbonyl and hydroperoxide groups.     

Surface changes during polypropylene photo-oxidation: A study by infrared spectroscopy and electron microscopy

The surface oxidation of polypropylene films which occurs during ultraviolet irradiation in air was found to result in extensive surface restructuring. This restructuring was detected by changes in surface infrared spectra, as measured by attenuated total reflection spectroscopy, and by electron microscopy. The 997 cm^?1/974 cm^?1 absorbance ratio of the film surfaces increased steadily during ultraviolet degradation and was interpreted as an increase in helical ordering which resulted from backbone scission during irradiation. This scission probably also results in the increase in crystallinity detected by density changes. Electron microscopy of direct surface replicas and replicas of material detached from the oxidized film surfaces showed that surface cracking resulted during photo-oxidation, and that this oxidation penetrated selectively into the polymer structure. The replicas of detached, oxidized material showed periodic structures related to the interior morphology of the films. The observed restructuring is believed to be entirely responsible for the decrease in percentage elongation at break which results from photodegradation.     

Mechanism of ultraviolet bonding of perfluoropolyethers revisited

The mechanism of ultraviolet (UV) bonding of perfluoropolyether (PFPE) boundary lubricants on magnetic disk surfaces is re-examined experimentally. It is found that UV-emitted photoelectrons may contribute a negligible part, and instead the UV bonding correlates with the direct photodissociation of PFPE molecules. The UV-induced photodissociation is demonstrated to occur almost randomly on the PFPE molecular chain. The contribution from photooxidation is eliminated under nitrogen purge.     

N,N-二乙基丙烯酰胺与丙烯酸在聚丙烯薄膜表面光接枝制备二元接枝膜及其温度、pH值敏感特性研究

以二苯甲酮为引发剂,聚丙烯薄膜(CPP)为基材,通过紫外光接枝的方法制备了具有温度和pH值双重敏感特性的聚N,N-二乙基丙烯酰胺(PNDEA)与聚丙烯酸(PAA)二元接枝膜.在PNDEA一次接枝膜的制备过程中,引发剂与单体配比相同时,本体接枝方法的接枝速率在反应初期明显高于溶液接枝方法;采用溶液法时,增大引发剂与单体配比等可提高接枝率.用本体法所制得的PNDEA一次膜光活化接枝PAA时接枝速率较溶液法高,并且能够实现较高的PAA接枝率.用红外光谱(FTIR)、X射线光电子能谱化学分析(ESCA)对接枝层组成的表征结果证实了二元接枝层的存在.在不同温度下,PNDEA一次接枝膜的FTIR谱图中酰胺Ⅰ带特征吸收峰发生位移表明它具有温度敏感特性.用扫描电子显微镜(SEM)对PNDEA接枝层表征结果表明,用不同接枝手段所制备的接枝膜具有不同的表面形貌.通过吸水率测定研究了二元接枝膜的温度及pH值敏感特性.     

Atmospheric photodissociation lifetimes for nitromethane,methyl nitrite,and methyl nitrate

Atmospheric photodissociation rate coefficients and photodissociation lifetimes for nitromethane, methyl nitrite, and methyl nitrate were calculated as a function of altitude from their measured visible and near ultraviolet photoabsorption cross sections at 298 K. The lifetime of methyl nitrite is nearly independent of altitude and is approximately 2 min. From 0 to 50 km the lifetime of nitromethane varies from 10 to 0.5 hr, while that of methyl nitrate changes from 5.3 to 0.09 days, respectively.     

Oxygen isotope fractionation in the vacuum ultraviolet photodissociation of carbon monoxide: wavelength, pressure, and temperature dependency

Several absorption bands exist in the vacuum ultraviolet (VUV) region of carbon monoxide (CO). Emission spectra indicate that these bands are all predissociative. Experimental results of CO photodissociation by vacuum ultraviolet photons (90 to 108 nm; ～13 to 11 eV) from the Advanced Light Source synchrotron by measurement of the oxygen isotopic composition of the products are presented here. A large (few hundred per mil) range of oxygen isotopic compositions are observed in the CO photodissociation product and are wavelength dependent. Slope values (δ('17)O/δ('18)O) ranging from 0.72 to 1.36 were observed in the oxygen three-isotope space (δ('18)O vs. δ('17)O), which anti-correlated with increasing synchrotron photon energy, and indicates a dependency on the upper electronic state specific dissociation dynamics (e.g., perturbation and coupling associated with a particular state). An unprecedented magnitude in isotope fractionation was observed for photodissociation at 105 and 107 nm and is found to be associated with accidental predissociation of the vibrational states (ν = 0 and 1) for the upper electronic state E(1)Π. A significant temperature dependency in oxygen isotopic fractionation was observed, indicating a rotational level dependency in the predissociation process.     

多孔TiO2薄膜的表面微结构对甲基橙光催化脱色的影响

 从含聚乙二醇的钛醇盐溶胶前驱体出发,通过浸渍提拉法在玻璃表面制备了锐钛矿型多孔TiO2薄膜．随着前驱物中聚乙二醇加入量及分子量的增加,聚乙二醇热分解后在薄膜中产生气孔的数量增多,孔径增大,TiO2薄膜表面的羟基含量也增加．TiO2薄膜中引入适当大小的微孔可明显提高薄膜的光催化活性;当孔径接近400nm时,光的散射增强,透光率下降,薄膜的光催化活性降低．     

Vacuum ultraviolet photodissociation and surface morphology change of water ice films dosed with hydrogen chloride

Time-of-flight (TOF) spectra of photofragment H atoms from the photodissociation of water ice films at 193 nm were measured for amorphous and polycrystalline water ice films with and without dosing of hydrogen chloride at 100-145 K. The TOF spectrum is sensitive to the surface morphology of the water ice film because the origin of the H atom is the photodissociation of dimerlike water molecules attached to the ice film surfaces. Adsorption of HCl on a polycrystalline ice film was found to induce formation of disorder regions on the ice film surface at 100-140 K, while the microstructure of the ice surface stayed of polycrystalline at 145 K with adsorption of HCl. The TOF spectra of photofragment Cl atoms from the 157 nm photodissociation of neutral HCl adsorbed on water ice films at 100-140 K were measured. These results suggest partial dissolution of HCl on the ice film surface at 100-140 K.     

Investigation of the structure of silk film regenerated with lithium thiocyanate solution

The Silk fibers of the mulberry (Bombyx Mori) were dissolved in a 70% lithium thiocyanate solution. Dissolved silk was regenerated by casting the films from the solution after dialyzing. The films were investigated by infrared (IR) spectroscopy and x-ray diffraction analysis. It was found that the freshly prepared film was amorphous. The transformation to the β-form could be brought about by heating, solvent induced crystallization, ultraviolet (UV) radiation, and prolonged storage. The mechanism of this transformation is discussed.     

Manganese Detection Using Stencil‐printed Carbon Ink Electrodes on Transparency Film

Mn concentrations were determined using square‐wave cathodic stripping voltammetry (CSV) with inexpensive, stencil‐printed carbon ink electrodes generated on polypropylene transparency films. Using an optimized pH 5 ammonium acetate buffer and addition of 1,4‐benzoquinone, a detection limit as low as 500 nM (30 ppb) was achieved. Addition of 1,4‐benzoquinone improved peak potential reproducibility and height, while addition of 3.5 % w/w sodium chloride to the background solution approximately doubled the sensitivity (μA/ppm). Tolerance tests with interfering metals were conducted and the method was found to be resilient to chromium(VI), iron(III), magnesium(II), nickel(II), and zinc(II), but susceptible to aluminum(III), copper(II), iron(II), and lead(II) at concentration ratios at or below one. This technique was successfully used to measure Mn levels in yerba mate and green tea samples as an example application.     

Photo-stabilising action of metal chelates in polypropylene—Part I: Excited state quenching versus UV antioxidant action under polychromatic irradiation

The photo-stabilising action of three metal chelates—nickel (II) 2,2′ thiobis (4-tert-octylphenylato) n-butylamine and the nickel and calcium derivatives of bis (ethyl-3,5-di-tert-butyl-4-hydroxybenzyl) phosphonate, in polypropylene—is examined using normal and second order derivative ultraviolet, infra-red and phosphorescence spectroscopic techniques and hydroperoxide analysis. Whilst all three stabilisers quenched the phosphorescence emission of a powerful photo-sensitiser, benzophenone, there was no protective action during photo-sensitised oxidation of the polymer. In the case of anthraquinone, there was no quenching and no protection. Processing history plays a dominant rôle in controlling the photo-stabilising performance of the chelates. Each stabiliser operates differently, being dependent on its relative stability during processing and photo-oxidation and on the formation and destruction of polymeric and antioxidant hydroperoxides during processing. Metal chelates operate by inhibiting polymer hydroperoxide formation during processing and acting as ultraviolet stable chain terminators or by giving products during the early stages of photo-oxidation which are themselves effective stabilisers.     

Preparation,Characterization, and Electrocatalytic Properties of Mixed‐Valent Nickel Hexacyanoferrate/Phosphomolybdate Hybrid Film Electrodes Towards Oxidation of Ascorbic Acid and Reduction of S2O$\rm{ {_{8}^{2-}}}$

Polynuclear mixed‐valent nickelhexacyanoferrate/phosphomolybdate (NiHCF/PMo), nickel/phosphomolybdate (Ni/PMo) hybrid films were prepared on glassy carbon electrode by multiple scan cyclic voltammetry. Combination of individual components gave the opportunity to fabricate hybrid film with tunable electrochemical and analytical properties compared to individual components. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickelhexacyanoferrate/phosphomolybdate film is characterized by four redox couple whereas nickel/phosphomolybdate hybrid film exhibits three redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. The voltammetric response of nickelhexacyanoferrate/phosphomolybdate film electrode was found to be depending on the pH of the contacting solution. Electrocatalytic behavior of nickel/phosphomolybdate hybrid film coated electrodes toward oxidation of ascorbic acid and reduction of sulfur oxoanion, S₂O , was investigated using cyclic voltammetry technique. Analytical application of nickel/phosphomolybdate hybrid film electrode was tested in amperometry and flow injection analysis.