Studies of chlorinated polyisobutenes. Part I. Investigations of structure by proton magnetic resonance and of thermal stability by thermal volatilization analysis

Polyisobutene was chlorinated in carbon tetrachloride solution at 60°C. with radiochlorine, and the degree of chlorination was determined radiochemically. The extent of chlorination was varied by using a wide range of chlorine/polyisobutene ratios in the reaction mixture. The products were examined by PMR spectroscopy, which showed that both methyl and methylene groups were chlorinated but that the methylene hydrogens were more readily substituted and some disubstitution of the methylene groups occurred. The effect of chlorination on the thermal stability compared to the original polymer was studied by the new technique of thermal volatilization analysis. All the chlorinated derivatives were found to degrade at lower temperatures than polyisobutene. The stability dropped progressively as the chlorine content was increased to one chlorine atom per isobutene unit and then showed less change with further increase in chlorine content.     

Determination of chlorine distribution in chlorosulfonated polyethylenes by high-resolution NMR spectroscopy

High-resolution proton magnetic resonance (NMR) spectroscopy was used to determine the sequence distribution of chlorines in elastomeric chlorosulfonated polyethylenes. The determination is based on measuring the relative amounts of methylene groups that are α, β, and γ (or greater) from chlorine containing groups (CHCl groups) in chlorosulfonated polyethylenes. The results obtained from the NMR examination at 220 MHz were compared with the theoretical predictions based on the statistics of substitution polymers. The comparison showed that polyethylenes chlorosulfonated by a solution reaction with gaseous chlorine and sulfur dioxide show a random chlorine distribution.     

Synthesis and characterization of polyesters derived from polychlorinated aromatic diacids

New, thermally stable polyesters with varying chlorine content were prepared by solution and interfacial polycondensation between chlorinated aromatic dichlorides (perchloroterephthaloyl dichloride, 2,5-dichloroterephthaloyl dichloride, and perchloro-4,4′-dichloroformyl biphenyl with different aliphatic and aromatic diols). The polymers were characterized by infrared spectroscopy, elemental analysis, differential scanning calorimetry, and thermogravimetric analysis. Their solubilities and molecular weights were also determined. The influence of chlorine content on the thermal properties of the polymers is discussed.     

氯化聚氯乙烯热稳定性研究 Ⅰ.氯含量对热稳定性影响

本文用红外光谱分析了聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)的分子结构,用电导法评价了它们的热稳定性. 试料 PVC系天津化工厂生产,XS-7型;CPVC系前者的氯化产品,由安徽化工研究所提供,含氯量64％,日本产CPVC,牌号H827,含氯量68.5％.     

Interaction of Chlorine with Hydrogenated Diamond Surface

The interaction of chlorine with the hydrogenated diamond surface has been investigated by diffuse reflectance Fourier-transform Infrared (FTIR) spectroscopy, temperature-programmed desorption (TPD) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The hydrogenated diamond surface is chlorinated by thermal reaction in chlorine. Hydrogen chemisorbed on the diamond surface is abstracted by chlorine and the chemisorption of chlorine is yielded. Hydroxyl groups are produced by treatment of the chlorinated diamond with water vapor at room temperature. Amino groups are produced by treatment of the chlorinated diamond with ammonia at 425 °C.     

Miscible blends of amorphous polymers

Thirty-five polymethacrylate/chlorinated polymer blends were investigated by differential scanning calorimetry. Poly(ethyl), poly(n-propyl), poly(n-butyl), and poly(n-amyl methacrylate)s were found to be miscible with poly(vinyl chloride) (PVC), chlorinated PVC, and Saran, but immiscible with a chlorinated polyethylene containing 48% chlorine. Poly(methyl) (PMMA), poly(n-hexyl) (PHMA), and poly(n-lauryl methacrylate)s were found to be immiscible with the same chlorinated polymers, except the PMMA/PVC, PMMA/Saran, and PHMA/Saran blends, which were miscible. A high chlorine content of the chlorinated polymer and an optimum CH₂/COO ratio of the polymethacrylate are required to obtain miscibility. However, poly(methyl), poly(ethyl), poly(n-butyl), and poly(n-octadecyl acrylate)s were found to be immiscible with the same chlorinated polymers, except with Saran, indicating a much greater miscibility of the polymethacrylates with the chlorinated polymers as compared with the polyacrylates.     

Thermal decomposition of poly(vinyl chloride) and chlorinated poly(vinyl chloride). II. Organic analysis

A concerted study of poly(vinyl chloride), chlorinated poly(vinyl chloride), and poly(vinylidene chloride) polymers by spectroscopy, thermal analysis, and pyrolysis-gas chromatography resulted in a proposed mechanism for their thermal degradation. Polymer structure with respect to total chlorine content and position was determined, and the influence of these polymer units on certain of the decomposition parameters is presented. Distinguishing differences were obtained for the kinetics of decomposition, reactive macroradical intermediates, and pyrolysis product distributions for these systems. It was determined that chlorinated poly(vinyl chloride) systems with long-chain ? CHCI? units were more thermally stable than the unchlorinated precursor, exhibited increasing activation energy for the dehydrochlorination, and produced chlorine-containing macroradical intermediates and chlorinated aromatic pyrolysis products. The poly(vinyl chloride) polymer was relatively less thermally stable, exhibited decreasing activation energy during dehydrochlorination, and produced polyenyl macro-radical intermediates and aromatic pyrolysis products.     

Chlorinated polyethylene. II. Chlorine distribution on the polymer chains

The nature of substitution in a slurry-phase chlorination of high-density polyethylene was studied using NMR and IR spectroscopy. The ratios of γ (or greater) methylenes were obtained from the NMR at different chlorine levels and compared with the theoretically predicted values based on a statistical treatment for substitution polymers. The results indicted that, unlike chlorosulfonated polyethylene, chlorinated polyethylene shows a hindered-type substitution. Molecular weight of the parent polyethylene, the degree of chlorination and the degree of residual crystallinity of the samples have no bearing on the type of substitution.     

NMR studies of chlorinated poly(vinyl chloride) and polybutadiene

Molecular structures of chlorinated poly(vinyl chloride) and polybutadiene have been studied by high resolution NMR. The spectra of the chlorinated polymers give broad signals. New peaks appear in the lower fields of the ? CH₂? and ? CHCl? groups with increasing chlorine content. The chlorination of poly(vinyl chloride) takes place predominantly on ? CH₂? rather than on ? CHCl? , e.g., a 70% chlorinated polymer has about 10 mole-% of ? CCl₂? groups. Polybutadiene reacts first with chlorine by addition to give a head-to-head poly(vinyl chloride), and then the substitution of the hydrogen atom takes place. Chlorinated polybutadiene with 70% Cl has about 18 mole-% of ? CCl₂? . The multiplets characteristic of spin-spin couplings in the spectrum of the original poly(vinyl chloride) are still observed in that of the highly chlorinated product. This fact shows that a considerable number of poly(vinyl chloride) sequences of certain lengths persist in the highly chlorinated polymer.     

Novel polymeric structures via the chlorination of cis-1,4-polybutadiene in the presence of aryl nucleophiles

The addition chlorination of cis-1,4-polybutadiene in the presence of a variety of aryl nucleophiles resulted in the formation of head-to-head poly(vinyl chloride) with pendant aromatic functional groups. Chlorination in methylene chloride solution with benzoic acid gave chlorinated polymers with pendant benzoate esters. Chlorination in the presence of phenol and benzhydrol provided polymers with pendent phenyl and diphenyl methyl ethers, respectively. Acetophenone participated during chlorination to affored polymer with pendant α-chloroether groups, while benzonitrile gave a polymer with pendant imidoyl chlorides. The extent of participation of these nucleophiles was estimated from elemental analysis and NMR spectral data, and the effect of aryl substitution on density, glass transition temperature, and linear coefficient of thermal expansion was determined. © 1993 John Wiley & Sons, Inc.     

Synthesis,characterization, processability,mechanical properties,flame retardant,and oil resistance of chlorinated acrylonitrile butadiene rubber

Novel chlorinated acrylonitrile butadiene rubber (Cl‐NBR) was prepared from NBR by the alkaline hydrolysis of chloroform by using phase‐transfer catalysis. The formation of Cl‐NBR was monitored by ¹H‐NMR, UV‐Vis, and Fourier transform infrared spectroscopic techniques. The percentage of chlorine attached to the rubber chain was estimated by Volhard method. The effect of polar groups on the structural and thermal properties of Cl‐NBR was analyzed by scanning electron microscopy, X‐ray diffraction analysis, differential scanning calorimetry, and thermogravimetric analysis studies. The flame retardant, oil resistance, cure behavior, and mechanical properties of chlorinated elastomer were also analyzed. The proton NMR revealed the attachment of chlorine in the backbone of NBR with new chemical shift values. The C‐Cl stretching of chlorinated NBR was confirmed from Fourier transform infrared. The UV spectrum also supported the formation of chlorinated unit in the NBR chain through the shifts and broadening of absorption peaks. The X‐ray diffraction analysis pattern indicated a decrease in the amorphous domain of NBR with an increase in the level of chemical modification. The increased glass transition temperature obtained from differential scanning calorimetry confirms the increased molecular rigidity of the chlorinated NBR and thermal transitions increased with increase in the level of chemical modification. The thermal stability of Cl‐NBR decreased with an increase in chlorine content. The flame and oil resistance of Cl‐NBR was greatly higher than pure NBR due to the increased polarity of modified rubber. The superior tensile strength of Cl‐NBR (4 times higher than pure NBR) and higher oil resistance find applications in pump diaphragms, aircraft hoses, oil‐lined tubing, and gaskets materials with the excellent flame resistant property.     

Halogenase‐Inspired Oxidative Chlorination Using Flavin Photocatalysis

Chlorine gas or electropositive chlorine reagents are used to prepare chlorinated aromatic compounds, which are found in pharmaceuticals, agrochemicals, and polymers, and serve as synthetic precursors for metal‐catalyzed cross‐couplings. Nature chlorinates with chloride anions, FAD‐dependent halogenases, and O₂ as the oxidant. A photocatalytic oxidative chlorination is described based on the organic dye riboflavin tetraacetate mimicking the enzymatic process. The chemical process allows within the suitable arene redox potential window a broader substrate scope compared to the specific activation in the enzymatic binding pocket.     

Self-assembly in evaporated polymer solutions: influence of the solution concentration

Amorphous polymers were dissolved in chlorinated organic solvents and deposited on thin horizontal substrates. The solutions with various concentrations of polymers were deposited and evaporated under ambient conditions in a slow air current. Self-assembled oriented mesoscopically scaled patterns were observed. The patterns were studied with optical and atomic force microscopy. The concentration of the solution exerts a decisive influence on the mesoscopic cell characteristic dimension. Cell dimensions grow linearly with the polymer solution concentration for all kinds of tested polymers, chlorinated solvents and substrates. The dependence could be explained by a physical mechanism, based on the mass transport instability occurring under the intensive evaporation of the solvent. In situ FTIR study of the process was performed first. It was established with FTIR spectroscopy that film porosity is not due to water droplet condensation under evaporation.     

Thermal degradation of a highly chlorinated paraffin used as a fire retardant additive for polymers

The thermal degradation of a highly chlorinated paraffin, (Cl 70% w/w)(CP), used as a fire retardant additive for polymers, has been studied by TG, DTA and TVA. The main volatile degradation product is HCl which is eliminated in two steps. To 60–70% dehydrochlorination an apparent zero order reaction occurs with a detectable rate from 250°C, probably initiated at labile chlorine atoms. The apparent activation energy of the process is 40 kcal/mole. A charred residue containing 35% chlorine is obtained. This residue undergoes nearly complete dehydrochlorination in the range 300–600°C.     

The Interactions of Aqueous Solutions of Chlorine with Citric Acid. A Source of Mutagens. (A Preliminary Report)

Abstract

Citric acid, an additive to an important acrylamide based polymeric flocculant, was found to react with an aqueous solution of chlorine to give several chlorinated propanones, di- and trichloroacetic acid, chloroform, and a number of as yet unidentified chlorine containing compounds. Formation of these alledged carcinogens and mutagens also takes place by treating diluted aqueous solutions of frozen orange juice concentrate with such chlorine solutions. The formation and ratios of the detected chlorinated compounds is pH-dependent. A tentative scheme which could account for these findings is presented.     

Structural and steric isomerism of polypropylenes

The structural and steric isomerism of propylene polymers has been estimated on the basis of solution properties as well as infrared and high-resolution nuclear magnetic resonance spectra. Three general types of polypropylenes were prepared: polymers prepared with the cationic catalytic system AlCl₃–C₂H₅Cl, stereoblock polymers obtained by successive extraction from a commercial product and isotactic polymers of low molecular weight obtained by thermal degradation of a highly isotactic polymer followed by hydrogenation with Adam's catalyst in dioxane at 40°C. The characterization of all samples was accomplished by equilibrium ultracentrifugation, vapor-pressure osmometry, viscometry, and gel-permeation chromatography. It is found that the molecular chain of cationically prepared polymer is somewhat branched owing to structural isomerism during polymerization. Isoamyl acetate is found to be a theta solvent for stereo-block as well as for atactic and syndiotactic polymers; the theta temperature is determined as the temperature at which the light-scattering second virial coefficient A₂ vanishes. A close correlation is found between the theta temperature and stereoisomerism. The absorbances of the 1154 and 974 cm^?1 bands in the infrared spectra decrease with decreasing molecular weight; in addition to the mere existence of alternating CH₂ and CH(CH₃) groups in the polymer chain, rather long sequences of this type are required for the appearance of these bands. Changes in the absorption band at 997 cm^?1 show that chains consisting of over ten isotactically connected monomer units can assume a helical conformation. From the high-resolution NMR spectra of different polypropylenes, including isotactic polymers of low molecular weight, it is found that in estimating the microstructure, account must be taken of the effects of stereoisomerism within tetrads of monomer units on the apparent widths of the methylene proton resonances. If substantial concentrations of several of the possible types of tetrads are present (i.e., if the tactic sequence lengths are quite short), then it is difficult to determine the relative amounts of tactic dyads accurately from the 100 Mcps methylene proton resonances.     

Chlorinated products of plastic pyrolysis

The formation of various chlorinated products in pyrolysis of polymers and plastics additives was studied. Formation of chlorobenzenes (in addition to the monomers) from poly(chlorostyrene) and poly(vinylbenzyl chloride) was observed. Hydrogen chloride is only produced from these polymers at above 600 °C when the chlorine atoms are cleaved off and abstract hydrogen. A similar process takes place in aromatic chlorine-containing dyes, in which the strong aromatic molecular structure prevents the thermal cleavage of chloroaromatic volatile products. We have observed that cupric and ferric chlorides chlorinate phenolic thermal decomposition products of plastic materials which originate either from the polymer or from the stabilizer. The highest yields of chlorophenols are obtained in pyrolysis at around 700 °C.     

Chemistry of lac resin—VII : Pure lac resin—3: Structure

It has been found that gas-liquid-chromatography of methyl esters of lac acids can be carried our after formylation of free OH groups. By this method, it has been found that pure lac resin is based on terpenic acids (essentially jalaric acid) and aleuritic acid in a 1:1 ratio and not in a 2:1 ratio as suspected earlier. This conclusion is clearly supported by a comparision of 220 MHz PMR spectra of pure lac resin derivatives with suitable reference samples. The PMR spectral data, taken along with the earlier results lead to the most plausible structure 11 for ‘pure lac resin’.     

Differential scanning calorimetry of chlorinated polyethylenes

The heats of fusion of low-density polyethylene and chlorinated polyethylenes of varying chlorine content have been investigated by differential scanning colorimetry (DSC). Linear correlations are found between the chlorine content and the apparent heat of fusion, crystallinity, and the maximum specific heat measured in the temperature range 90–120°C. The effect of heat treatment on crystallinity is shown to be strongly dependent on the chlorine content of the polymers.     

氯化聚乙烯弹性体的固相法合成

讨论了以固相法合成氯化聚乙烯（ＣＰＥ）弹性体的过程．实验结果表明，以固相氯化反应所得的ＣＰＥ，其大分子链上Ｃｌ取代基的分布比水相悬浮法更均匀．氯化过程的温度直接影响氯化速度及分子结构，如残留结晶、氯分布等．而聚乙烯颗粒表面与内部的氯化程度取决于氯化速度．大分子链上Ｃｌ取代基对邻近基团的氯化起阻碍作用