Photoisomerization of bis(trifluoromethyl)thiophenes

The photolysis of 2,3-bis(trifluoromethyl)thiophene gave an equilibrium mixture of 2,3- and 3,4-bis(trifluoromethyl)Dewar thiophenes, while that of 2,5-bis(trifluoromethyl)thiophene gave 2,4-bis(trifluoromethyl)-thiophene, which seemed to be formed through an intermediate other than the Dewar form.     

Infrared photochemistry of bis(trifluoromethyl) peroxide

Bis(trifluoromethyl) peroxide is readily dissociated by multiple infrared photon excitation at CO₂ laser wavelengths. The primary dissociation product is CF₃O; approximately 85% of the nascent radicals are further dissociated in the laser field to form CF₂O and F. The F atoms then react with the remaining CF₃O to produce CF₃OF. The formation of CF₃OF is strongly inhibited by addition of HI, which reacts preferentially with the F atoms.     

Thiazyl-[bis(trifluoromethyl)nitroxide] and tris- { thiazyl-[bis(trifluoromethyl) nitroxide] }

The decomposition and trimerisation of (CF₃)₂ NOSN (2) are investigated, the structure determinations of 2 (by electron diffraction in the gas phase) and of [(CF₃)₂ NOSN]₃ (6) (by x-ray crystallography) are reported.     

Synthesis and properties of mercury bis(trifluoromethyl)phosphanides and their phosphane complexes

The thermally unstable compounds Hg(CN)P(CF(3))(2) and Hg[P(CF(3))(2)](2) were obtained by reactions of mercury cyanide and bis(trifluoromethyl)phosphane in solution and characterized by multinuclear NMR spectroscopy. An increase in thermal stability is observed when the products form 18 valence electron complexes. The compounds [Hg(P(CF(3))(2))(2)(dppe)] (dppe = 1,2-bis(diphenylphosphanyl)ethane) and [Hg(P(CF(3))(2))(2)(Me(3)P)(2)] have been isolated in almost quantitative yield by reacting [Hg(CN)(2)(dppe)] or [Hg(CN)(2)(Me(3)P)(2)] with HP(CF(3))(2). [Hg(P(CF(3))(2))(2)(dppe)] crystallizes in the triclinic space group P1. The mercury atom is coordinated in a distorted tetrahedral fashion. The Hg-P(CF(3))(2) bonds, ca. 250 pm, are significantly longer than those of the mercury bis(phosphanides) Hg(PR(2))(2) with R = t-Bu, 245 pm, or SiMe(3), 241 pm. These easily accessible compounds [Hg(P(CF(3))(2))(2)(dppe)] and [Hg(P(CF(3))(2))(2)(Me(3)P)(2)] act as nucleophilic bis(trifluoromethyl)phosphane group transfer reagents.     

Chemistry of trifluoromethyl compounds : I. NMR evidence for bis(trifluoromethyl)zinc and methyl(trifluoromethyl)zinc

Bis(trifluoromethyl)zinc and methyl(trifluoromethyl)zinc have been identified by ¹⁹F and ^1H NMR methods. The compounds were formed in the following reactions: (1) dimethylzinc and bis(trifluoromethyl)mercury and (2) dimethylzinc and bis(trifluoromethyl)cadmium.     

Thermodynamic properties of the N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide

This work is a continuation of our wide ranging investigation on quinolinium based ionic liquids (ILs). The study includes specific basic characterisation of the synthesized compounds N-octylquinolinium bromide, [OQuin][Br] and N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide [OQuin][NTf₂] by NMR spectra, elementary analysis and water content. Differential scanning calorimetry (DSC) measurements gave us properties of the pure [OQuin][NTf₂] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity at the glass transition. Densities and viscosities were determined as a function of temperature. The temperature-composition phase diagrams of 10 binary mixtures composed of organic solvent dissolved in the IL: {[OQuin][NTf₂] + aromatic hydrocarbon (benzene, or thiophene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol, or 1-dodecanol)} were measured at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (250 to 370) K. For mixtures with benzene and alkylbenzenes, the immiscibility gap in the liquid phase in a low mole fraction of the IL was observed with upper critical solution temperature (UCST) higher than the boiling point of the solvent. In the system with thiophene, the immiscibility gap is lower and UCST was measured. For binary mixtures with alcohols, complete miscibility in the liquid phase was observed for 1-butanol and 1-hexanol. In the systems with longer chain alcohols, the immiscibility gap with UCST was noted. Typical behaviour for ILs was observed with an increase of the chain length of an alcohol the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibrium data sets.     

Direct N-nitration of bis(trifluoromethyl)-containing 2-azanorbornanes

Nitration of 6,7-disubstituted 3,3-bis(trifluoromethyl)-2-azanorbornanes affords the corresponding N-nitro derivatives.     

Cycloaddition of nitrile N-oxides to bis(trifluoromethyl)ketene

Conclusions The cycloaddition of nitrile N-oxides to bis(trifluoromethyl)ketene leads to 2-hexafluoroisopropylidene-1,3,4-dioxazoles.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2140–2142, September, 1970.     

Addition of nucleophilic reagents to bis(trifluoromethyl) ketene

Conclusions When -hydrohexafluorothiolisobutyric acid is reacted with bis (trifluoromethyl) ketene, the initial act is addition bo the C=O multiple bond of the latter.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2408–2410, October, 1982.     

The reactions of hydrogen atoms with bis(trifluoromethyl)disulfide

The reactions of hydrogen atoms produced by the mercury-photosensitized decomposition of H₂ with bis(trifluoromethyl)disulfide has been studied. The rate coefficient for the primary reaction, H + CF₃SSCF₃ → CF₃SH + CF₃S, was determined in competition with the reaction H + C₂H₄S → SH + C₂H₄ to have the value k = (3.0 ± 0.18) × 10¹⁴ exp[-(4560 ± 140)/RT] cm³ mol^?1 S^?1. The high A factor can be partially accounted for by assuming free rotation for the two CF₃ groups and the SCF₃ groups about the S—S bond in the transition state. The relatively high activation energy is attributed to inductive and orbital overlap effects. CH₃SH, H₂S, and CF₃SH all react with CF₃SSCF₃ to yield solid complexes which were not explored further.     

Synthesis of the first chiral bidendate bis(trifluoromethyl)phosphane ligand through stabilization of the bis(trifluoromethyl)phosphanide anion in the presence of acetone

Lewis acid/Lewis base adduct formation of the P(CF3)2- ion and acetone leads to a reduced negative hyperconjugation and, therefore, limits the C--F bond activation. The resulting increased thermal stability of the P(CF3)2- ion in the presence of acetone allows selective substitutions and enables the synthesis of the first example of a chiral, bidentate bis(trifluoromethyl)phosphane ligand: a DIOP derivative, [(2,2-dimethyl-1,3-dioxolane-4,5-diyl)bis(methylene)]bis(diphenylphosphane), in which the phenyl groups at the phosphorus atoms are replaced by strong electron-withdrawing trifluoromethyl groups. The resulting high electron-acceptor strength of the synthesized bidentate (CF3)2P ligand is demonstrated by a structural and vibrational study of the corresponding tetracarbonyl-molybdenum complex. The stabilization of the P(CF3)2- ion in the presence of acetone is based on the formation of a dynamic Lewis acid/Lewis base couple, (CF3)2PC(CH3)2O-. Although there is no spectroscopic evidence for the formation of the formulated alcoholate ion, the intermediate formation of (CF3)2PC(CH3)2O- could be proved through the reaction with (CF3)2PP(CF3)2, which yields the novel phosphane-phosphinite ligand (CF3)2PC(CH3)2OP(CF3)2. This ligand readily forms square-planar Pt(II) complexes upon treatment with solid PtCl2.