Polysaccharides at interfaces 2. Surface potential of adsorbed cholesteryl-pullulan monolayers at the solution-air interface

The surface potential of adsorbed monolayers of cholesteryl-pullulan (CHP) derivatives has been determined by the ionizing differential electrode method. It has been found that this potential is highly dependent on the degree of cholesterol grafted onto pullulan, and that the native polysaccharide displays neither surface activity nor surface potential. As the disordered structure of the non-ionic polysaccharide unit generates a random orientation of intrinsic dipole moments, it has been considered that its contribution to the measured surface potential is rather small, compared to the cholesteryl group dipolar contribution. The surface densities of cholesteryl groups of adsorbed CHP molecules have been determined from the relationship between the surface potential and the surface density of spread cholesterol molecules. The assessment of these quantities was essential, as the determination of the surface tension data for the CHP derivatives with low cholesteryl content (CHP_45−0.6 and CHP_50−0.9) was difficult to achieve (Part I of this work [B. Deme´, V. Rosilio and A. Baszkin, Colloids Surfaces B: Biointerfaces, 4 (1995) 357]). These results complement those from the surface tension measurements, and confirm that in the surface layer of the adsorbed polysaccharide the ordered cholesteryl groups are oriented towards the air phase and the disordered polysaccharide is immersed in the aqueous subphase. Proposed models for semi-organized adsorbed CHP layers are discussed.     

Assessment of first-rate adsorption constants of platelet membrane proteins bearing liposomes by surface tension measurements

The presence of platelet proteins embedded in liposome membranes drastically modified the diffusional transport and adsorption of these vesicles at the air/water interface. The calculated first-order rate constants of adsorption were by a factor of 10 higher than those corresponding to protein-free liposomes. These results provide an indication of the possible use of such proteoliposomes as models to obtain a more fundamental understanding at the molecular level of the interaction of proteins with phospholipids during adsorption and spreading processes.     

Surface tension measurements in the study of molecular complexes

Surface tension measurements can be used to investigate molecular complex formation in liquid solutions for strong and weak complexes. The association constant and epthalpy for triethylamine-iodine, hexamethylbenzene-tetracyanoethylene and ethanol-iodine in cyclohexane are 4·55×10³, 218 and 0.93M⁻¹ at 25° C and 12·5, 7·7 and 5·1 kcal/mol respectively. These values compare well with those reported in the literature by other methods.     

Study of polymer-surfactant interactions via surface tension measurements

Interactions between a polymer and a surfactant were studied via surface tension measurements. Poly(ethylene glycol) and sodium dodecyl sulfate were used as a polymer and a surfactant, respectively. The addition of polymer affected the CMC value of the surfactant. The interpretations of the data and theoretical plots of polymer-surfactant interactions are discussed using a theoretical model. Received: 28 September 2000 Accepted: 3 October 2000     

Effect of solution viscosity on dynamic surface tension detection

A dynamic surface tension detector (DSTD) was used to examine the molecular diffusion and surface adsorption characteristics of surface-active analytes as a function of solution viscosity. Dynamic surface tension is determined by measuring the differential pressure across the air/liquid interface of repeatedly growing and detaching drops. Continuous surface tension measurement throughout the entire drop growth is achieved for each eluting drop (at a rate of 30 drops/min for 2 μl drops), providing insight into the kinetic behavior of molecular diffusion and orientation processes at the air/liquid interface. Three-dimensional data are obtained through a calibration procedure previously developed, but extended herein for viscous solutions, with surface tension first converted to surface pressure, which is plotted as a function of elution time axis versus drop time axis. Thus, an analyte that lowers the surface tension results in an increase in surface pressure. The calibration procedure derived for the pressure-based DSTD was successfully extended and implemented in this report to experimentally determine standard surface pressures in solutions of varied viscosity. Analysis of analytes in viscous solution was performed at low analyte concentration, where the observed analyte surface activity indicates that the surface concentration is at or near equilibrium when in a water mobile phase (viscosity of 1.0 Cp). Two surface-active analytes, sodium dodecyl sulfate (SDS) and polyethylene glycol (MW 1470 g/mol, PEG 1470), were analyzed in solutions ranging from 0 to 60% (v/v) glycerol in water, corresponding to a viscosity range of 1.0-15.0 Cp. Finally, the diffusion-limited surface activity of SDS and PEG 1470 were observed in viscous solution, whereby an increase in viscosity resulted in a decreased surface pressure early in drop growth. The dynamic surface pressure results reported for SDS and PEG 1470 are found to correlate with solution viscosity and analyte diffusion coefficient via the Stokes-Einstein equation.     

Crown ethers at the aqueous solution-air interface: 1. Assignments and surface spectroscopy

The surface of aqueous solutions of 4-Nitro Benzo-15-Crown-5 (NB15C5) and Benzo-15-Crown-5 (B15C5) has been studied using the surface sensitive technique vibrational sum frequency spectroscopy (VSFS). The NO, CN, COC and CH vibrational modes of these compounds at the air-water interface as well as OH vibrational modes of the surface water hydrating this compound have been targeted in order to obtain molecular information about arrangement and conformation of the adsorbed crown ether molecules at the air-water interface. The CH(2) vibrational modes of crown ethers have been identified and found to be split due to interaction with ether oxygen. The spectra provide evidence for the existence of a protonated crown complex moiety at the surface leading to the appearance of strongly ordered water species. The interfacial water species are influenced by the resulting charged interface and by the strong Zundel polarizability due to tunneling of the proton species between equivalent sites within the crown ring.     

Adsorption kinetics at air/solution interface studied by maximum bubble pressure method

A general dynamic surface adsorption equation (t) for maximum bubble pressure method was derived by solving Ficks diffusion equation for the bubbles under different initial and boundary conditions. Different from the planar surface adsorption(Ward-Tordai equation), the derived dynamic surface adsorption (t) for the short time consists of two terms, one of them reflects the geometric effect caused by the spherical bubble surface. This kind of effect was discussed.The equilibrium surface tension _eq and the dynamic surface tension (t) of aqueous C₁₀E₈ (CH₃(CH₂)₉(OCH₂CH₂)₈OH) solution at temperature 25 °C were measured by means of Wilhelmy plate method and maximal bubble pressure method respectively. In the region of t0 (short time limits) a good agreement of experimental results with the theory was reached and the adsorption was controlled by diffusion. However, for the long time limits, a mixed diffusion-kinetics controlled process was proved.     

Spontaneous non-linear surface tension oscillations in the presence of a spread surfactant monolayer at the air/water interface

The phenomena accompanying the dissolution of a surfactant droplet under the water/air interface covered by a spread monolayer are studied experimentally and theoretically. It is shown that the variation of the initial surface coverage changes the way of the system evolution. With respect to the character of changes of the interfacial tension with time one can distinguish between three different regimes which replace each other by increase of the initial surface coverage: (i) single oscillation followed by a long period of the monotonous decrease of the surface tension after which repeated non-linear oscillations develop spontaneously; (ii) repeated non-linear oscillations of the surface tension (without period of the monotonous decrease); (iii) monotonous decrease of the surface tension without any oscillation. The hydrodynamics of the observed regimes are discussed.     

Particles at the airway interfaces of the lung

Inhaled particles may land on the surface of the lung’s airspaces. Upon making contact with the airway wall, the processes of retention and clearance begin. Particle retention depends on many factors; among these are: (1) particle size, shape, solubility, surface chemistry and elastic properties of both the particles and the lung surface. (2) The anatomical location of the deposition site. (3) The structures with which the particle interacts at the site of deposition, including the surfactant film at the air–liquid interface, the aqueous phase, free cells like macrophages, lymphocytes and granulocytes, the epithelial cells and dendritic cells that reside at the basal side of the epithelium. Particles, after their deposition are wetted and displaced towards the epithelium by the surfactant film during the retention process. In vitro experiments have demonstrated that the extent of particle immersion depends on the surface tension of the surfactant film. The lower the surface tension, the greater is the immersion of the particles into the aqueous phase. Experimental results demonstrate consistently greater immersion of smaller particles into a liquid substrate covered with a surfactant film than that for larger particles. The exact mechanism, especially the initial wetting process, is not yet understood and requires further experiments. Line tension is a possible explanation for the dependence of particle displacement on particle size.     

Impact of carbon dioxide on the surface tension of 1-hexanol aqueous solutions

Effects of carbon dioxide presence on the surface tension and adsorption kinetics of 1-hexanol solutions were investigated. Experiments were performed at a range of carbon dioxide vapor pressures and varying concentrations of 1-hexanol aqueous solution. Both dynamic and steady-state surface tensions of 1-hexanol aqueous solution were found to decrease with carbon dioxide pressure, and a linear relationship was observed between the steady-state surface tension and carbon dioxide pressure. To explain the experiments, adsorption and desorption of the two species (1-hexanol and carbon dioxide) from two sides of the vapor-liquid interface were considered. A modified Langmuir isotherm, the modified Langmuir equation of state and the modified kinetic transfer equation were developed. The resulting steady-state and dynamic surface tension data were modeled using the modified Langmuir equation of state and the modified kinetic transfer equation, respectively. Equilibrium constants and adsorption rate constants of 1-hexanol and carbon dioxide were evaluated through a minimization procedure for CO₂ pressures ranging from 0 to 690 kPa. From the steady-state modeling, the equilibrium parameters for 1-hexanol and carbon dioxide adsorption from vapor phase and liquid phase were found unchanged at different pressures of carbon dioxide. From the dynamic modeling, the adsorption rate constants for 1-hexanol and carbon dioxide from vapor phase and liquid phase were found to decrease with carbon dioxide pressure. Some fluctuations in the fitting parameters of the dynamic modeling (adsorption rate constants) were observed. These fluctuations may be due to experimental errors, or more likely the limitations of the model used. A major limitation of the model is related to large differences in adsorption/desorption between initial and final stages of the process, and a single set of property parameters cannot describe both initial and final states of the system. Variations may occur depending on which set of data, of initial or final states, is used in the model predictions over the entire time range.     

Adsorption of TX100 and TX165 at the aqueous solution–air interface: free enthalpy of adsorption and equation of state

Surface tension measurements of aqueous solutions of TX100 and TX165 were made at different temperatures. The thermodynamic parameters of the adsorption calculated from the surface tension measurements, using several methods, have given slightly different values. The equation of state for the TX100 and TX165 monolayers at the solution–air interface was analysed. There is excellent agreement between the modified Volmer equation of state and the experimental π–A isotherms. Received: 13 July 1999/Accepted in revised form: 20 October 1999     

Obtaining surface tension from contact angle data by the individual representation approach

Young equation is the fundamental equation of wetting theory in which the connection among the surface tensions, \(\gamma _{{\varphi \psi }} \) and the contact angle, θ _L, are given. The surface tension of solid surfaces, however, cannot be obtained directly from the Young equation. In this paper, the application of the individual representation theory is demonstrated for the determination of surface tensions of solids (or any phase pair) using experimentally obtained contact angle data. According to this approach, the state of the interfacial layers depends upon, by definition, the properties of the bulk phases in every heterogeneous system, and thus, it complements the traditional capillary theory.     

Analysis of dynamic surface tension of tetraethyleneglycol monooctyl ether at air/water interface

The dynamic surface tension of the aqueous solutions of tetraethyleneglycol monooctyl ether (C₈E₄), a nonionic surfactant, was measured at different concentrations and temperatures. Present data at 298.15 K clearly indicate that the mechanism of adsorption is purely diffusion controlled at low concentrations (0.1~0.4 mmol/kg), and there is a switchover in adsorption mechanism to the mixed diffusion-kinetic control at higher concentrations. The calculated activation energies increase with concentration, and thus, with surface density, but decrease with temperature. The magnitude of activation energy and its increase with surface density suggest that the barrier is due to the free surface site formation by overcoming mainly the attractive van der Waals forces between the chain of adsorbed C₈E₄ molecules.     

Capillary constant and surface tension of methane-nitrogen solutions: 1. Experiment

The differential version of the method of capillary rise has been used to measure the capillary constant and calculate the surface tension of methane-nitrogen solutions. Experiments have been conducted in the temperature range from 95 to 170 K at pressures up to 4 MPa. Experimental data on surface tension have been compared with the results of calculations by thermodynamic models. Equations are given which describe the dependence of the capillary constant of a solution on its temperature and composition.     

Line tension of alkane lenses on aqueous surfactant solutions at phase transitions of coexisting interfaces

Alkane droplets on aqueous solutions of surfactants exhibit a first-order wetting transition as the concentration of surfactant is increased. The low-concentration or “partial wetting” state corresponds to an oil lens in equilibrium with a two-dimensional dilute gas of oil and surfactant molecules. The high-concentration or “pseudo-partial wetting” state consists of an oil lens in equilibrium with a mixed monolayer of surfactant and oil. Depending on the combination of surfactant and oil, these mixed monolayers undergo a thermal phase transition upon cooling, either to a frozen mixed monolayer or to an unusual bilayer structure in which the upper leaflet is a solid layer of pure alkane with hexagonal packing and upright chains while the lower leaflet remains a disordered liquid-like mixed monolayer. Additionally, certain long-chain alkanes exhibit a surface freezing transition at the air–oil interface where the top monolayer of oil freezes above its melting point. In this review, we summarize our previous studies and discuss how these wetting and surface freezing transitions influence the line tension of oil lenses from both an experimental and theoretical perspective.     

A theory of adsorption kinetics with time delay and its application to overshoot and oscillation in the surface tension of gelatin solution

A theory of adsorption kinetics with time delay [Ohshima et al. (1992) Colloid Polym. Sci. 270:707] is developed and applied to the surface tension of a polymer solution. It is found that the general appearance of the overshoot and oscillation in the time course of the surface tension of aqueous gelatin solution observed by Sato and Ueberreiter [(1979) Makromol. Chem. 180:829, 1107; (1979) Polym. Prepr. Am. Chem. Soc. Div. Polym. Chem. 20:907) can be explained by the present theory.     

Adsorption behavior of phospholipid vesicles at oil/water interfaces

By measuring the change in interfacial tension after adding phospholipid vesicles to an aqueous solution of electrolyte, we studied the adsorption behavior of phospholipid vesicles at oil/water interfaces. The effects of concentration of three kinds of electrolyte (NaCl, MgCl₂, LaCl₃) and of the mixing ratio of two kinds of phospholipids (phosphatidylcholine and phosphatidylserine), on the adsorption behavior at an oil/water interface were examined. The results were interpreted using the DLVO theory.     

Poly(itaconates) monolayers behavior at the air/water interface. Study at different surface concentration

Polymer monolayers spread at the air/water interface were obtained for: poly(monooctyl itaconate) (PMOI), poly(monodecyl itaconate) (PMDI), poly(monododecyl itaconate) (PMDoI), poly(monobenzyl itaconate) (PMBzI), poly(methyldodecyl itaconate) (PMeDoI) and the alternating copolymer (monooctyl itaconate-alt-maleic anhydride) (MOI-alt-MA). By monolayer compression at constant temperature, the respective Langmuir isotherms for these polymers were obtained. For all polymers the zero-pressure limiting area per repeating unit (ru) Ao, and the collapse pressure π_c were determined. At low surface polymer concentrations, the monolayers characterization was carried out according to the surface pressure expressed as a function of the surface concentration. The behavior observed was described by the virial expansion development. At the semidilute region, the surface pressure variation was expressed in terms of the scaling laws as a power function of the surface concentration.