Clay‐Na as a sorbent for the extraction of anti‐inflammatory compounds in water samples

In this work, clay‐Na particles are used as the adsorbent for the solid‐phase extraction of acidic compounds. The novel sorbent under study is based on high‐specific surface area, cation‐exchange capacity designed specifically to offer ion‐exchange properties with the goal being to selectively extract a group of acidic compounds. The effects of the extraction parameters including extraction elution solvent, sample volume and pH. In optimum conditions, the repeatability for one fiber (n = 3), expressed as % relative standard deviation, was between 0.3 and 4.3% for the acid compounds. The detection limits for the studied acidic compounds were between 0.1–0.6 μg/L. The developed method offers the advantages of being simple to use and having a low cost of equipment.     

Evaluation of amino acid ester‐based ionic liquids as buffer additives in CE for the separation of 2‐arylpropionic acids nonsteroidal anti‐inflammatory drugs

The aim of the present study is the CE performance evaluation for the separation of 2‐arylpropionic acid nonsteroidal anti‐inflammatory drugs. In particular, the separation of indoprofen, carprofen, ketoprofen, ibuprofen, and flurbiprofen was obtained by supporting the BGE either with SDS or an amino acid ester‐based ionic liquid (AAIL). The performance of these additives was evaluated by comparing migration times, efficiencies and %RSD values. The addition of the AAIL into the BGE provided baseline separation within 10 min, while in the case of SDS, the analytes eluted within 23 min. The optimum conditions involve a BGE of 100 mM Tris/10 mM sodium tetraboratedecahydrate (pH 8) and 40 mM l ‐alanine tert butyl ester lactate or 10 mM SDS and a temperature of 35°C for AAIL and 20°C for SDS. The run‐to‐run reproducibility was evaluated by computing the %RSD values of the EOF and the analyte peaks. When the AAIL was used, an excellent reproducibility was obtained, since all %RSD values were below 1.3%. On the contrary, the addition of SDS resulted in much higher RSD values (2.1–11.7%). The efficiency values of all analyte peaks were above 102 000 for l ‐AlaC₄Lac, in comparison to SDS, which provided efficiency values between 47000 and 76000. Finally, in an attempt to study the synergistic effect of SDS and AAIL, both additives were added into the BGE at concentrations of 10 and 40 mM, respectively. The results were similar to the ones obtained when SDS was used as the sole additive.     

Functionalization of PAMAM dendrimers with nitronyl nitroxide radicals as models for the outer‐sphere relaxation in dentritic potential MRI contrast agents

PAMAM dendrimers functionalized with nitronyl nitroxide radicals were characterized. Quantitative determination of substitution with radicals was performed using EPR and electrochemical methods. The study of the ¹H NMR relaxation of the surrounding water showed how the outer‐sphere contribution to the relaxivity may be limited by the presence of the dendrimer core. Copyright © 2003 John Wiley & Sons, Ltd.     

Kinetic study of H‐atom transfer in imidazoline‐, imidazolidine‐, and pyrrolidine‐based alkoxyamines: Consequences for nitroxide‐mediated polymerization

The H‐atom transfer reaction was studied for a series of imidazoline, imidazolidine, and pyrrolidine‐based alkoxyamines containing either isobutyrate‐2‐yl or 1‐phenylethyl alkyl fragments. The C O bond homolysis rate constants and activation energies were determined by ¹H NMR product analysis as a function of temperature. Inter‐ and intramolecular H‐atom transfer reactions were distinguished by examination of alkoxyamine thermolysis products in the absence and in the presence of a radical scavenger (thiophenol or deuterated styrene). A correlation between the structure of the nitroxyl fragment of alkoxyamine and the H‐transfer reaction was found. The high steric demands of the substituents on the nitroxyl part of the isobutyrate‐2‐yl alkoxyamine decrease both types of reaction. For alkoxyamines containing the 1‐phenylethoxyamines, neither inter‐ nor intramolecular H‐atom transfer was observed. Controlled polymerization of methylmethacrylate initiated with imidazoline‐based alkoxyamine was observed, although the polymer obtained was not living. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6579–6595, 2009     

On‐bead combinatorial synthesis and imaging of europium(III)‐based paraCEST agents aids in identification of chemical features that enhance CEST sensitivity

The rate of water exchange between the inner sphere of a paramagnetic ion and bulk water is an important parameter in determining the magnitude of the chemical exchange saturation transfer signal from paramagnetic CEST agents (paraCEST). This is governed by various geometric, steric and ligand field factors created by macrocyclic ligands surrounding the paramagnetic metal ion. Our previous on‐bead combinatorial studies of di‐peptoid–europium(III)–1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid (DOTA)–tetraamide complexes revealed that negatively charged groups in the immediate vicinity of the metal center strongly enhances the CEST signal. Here, we report a solid phase synthesis and on‐bead imaging of 76 new DOTA derivatives that are developed by coupling with a single residue onto each of the three arms of a DOTA–tetraamide scaffold attached to resin beads. This single residue predominantly carries negatively charged groups blended with various physico‐chemical characteristics. We found that non‐bulky negatively charged groups are best suited at the immediate vicinity of the metal ion, while positive, bulky and halogen containing moieties suppress the CEST signal. Copyright © 2017 John Wiley & Sons, Ltd.     

Solid‐phase microextraction based on an agarose‐chitosan‐multiwalled carbon nanotube composite film combined with HPLC–UV for the determination of nonsteroidal anti‐inflammatory drugs in aqueous samples

We describe the preparation, characterization, and application of a composite film adsorbent based on blended agarose‐chitosan‐multiwalled carbon nanotubes for the preconcentration of selected nonsteroidal anti‐inflammatory drugs in aqueous samples before determination by high performance liquid chromatography with ultraviolet detection. The composite film showed a high surface area (4.0258 m²/g) and strong hydrogen bonding between the multiwalled carbon nanotubes and agarose/chitosan matrix, which prevent adsorbent deactivation and ensure long‐term stability. Several parameters, such as sample pH, addition of salt, extraction time, desorption solvent, and concentration of multiwalled carbon nanotubes in the composite film were optimized using a one‐factor‐at‐time approach. The optimum extraction conditions obtained were as follows: isopropanol as conditioning solvent, 10 mL of sample solution at pH 2, extraction time of 30 min, stirring speed of 600 rpm, 100 μL of isopropanol as desorption solvent, desorption time of 5 min under ultrasonication, and 0.4% w/v of composite film. Under the optimized conditions, the calibration curve showed good linearity in the range of 1–500 ng/mL (r² = 0.997–0.999), and good limits of detection (0.89–8.05 ng/mL) were obtained with good relative standard deviations of < 4.59% (n = 3) for the determination of naproxen, diclofenac sodium salt, and mefenamic acid drugs.     

Determination of four acidic nonsteroidal anti‐inflammatory drugs in wastewater samples by dispersive liquid–liquid microextraction based on solidification of floating organic droplet and high‐performance liquid chromatography

A simple, environmentally friendly, and sensitive dispersive liquid–liquid microextraction based on solidification of floating organic droplet for the extraction of four acidic nonsteroidal anti‐inflammatory drugs (ketoprofen, naproxen, ibuprofen, and diclofenac) from wastewater samples subsequent by high‐performance liquid chromatography analysis was developed. The influence of extraction parameters such as pH, the effect of solution ionic strength, type of extraction solvent, disperser solvent, and extraction solvent volume were studied. High enrichment factors (283–302) were obtained through the developed method. The method provides good linearity (r > 0.999) in a concentration range of 1–100 μg/L, good intra‐ and inter‐day precision (relative standard deviation < 7%) and low limits of quantification. The relative recoveries of the selected compounds were situated over 80% both in synthetic and real water samples. The developed method has been successfully applied for the analysis of the selected compounds in wastewater samples.     

Preparation of highly hydrophilic magnetic nanoparticles with anion‐exchange ability and their application for the extraction of non‐steroidal anti‐inflammatory drugs in environmental samples

Diallyldimethylammonium chloride modified magnetic nanoparticles were synthesized by the “thiol‐ene” click chemistry reaction. Diallyldimethylammonium chloride rendered the material plenty of quaternary ammonium groups, and thus the excellent aqueous dispersibility and anion‐exchange capability. The novel material was then used as the magnetic solid‐phase extraction sorbent to extract eight non‐steroidal anti‐inflammatory drugs from water samples. Combined with high‐performance liquid chromatography and ultraviolet detection, under the optimal conditions, the developed method exhibited wide linearity ranges (1–1000, 2–1000, and 5–1000 ng/mL) with recoveries of 88.0–108.6% and low limits of detection (0.3–1.5 ng/mL). Acceptable precision was obtained with satisfactory intra‐ and inter‐day relative standard deviations of 0.4–4.4% (n = 3) and 1.1–5.5% (n = 3), respectively. Batch‐to‐batch reproducibility was acceptable with relative standard deviations <9.7%. The hydrophilic magnetic nanoparticle featured with quaternary ammonium groups showed high analytical potential for acidic analytes in environmental water samples.     

Half‐sandwich ruthenium‐based versatile catalyst for both alcohol oxidation and catalytic hydrogenation of carbonyl compounds in aqueous media

A series of half‐sandwich ruthenium‐based catalysts for both alcohol oxidation and carbonyl compounds hydrogenation have been synthesized through metal‐induced C–H bond activation based on benzothiazole ligands. The neutral ruthenium complexes 1 – 4 were fully characterized by UV–vis, NMR, IR, and elemental analysis. Molecular structures of complexes 1 and 3 were further confirmed by X‐ray diffraction analysis. All complexes exhibited high activity for the catalytic oxidation of a variety of alcohols with ^tBuOOH as oxidants to give carbonyl compounds with high yields in water. Moreover, these half‐sandwich complexes also showed high efficiency for the catalytic hydrogenation of carbonyl compounds in a methanol–water mixture. The catalyst could be reused for at least five cycles without any loss of activity. The catalytic system also worked well for various kinds of substrates with either electron‐donating or electron‐withdrawing groups.     

Screening of analgesic and anti‐inflammatory active component in Fructus Alpiniae zerumbet based on spectrum–effect relationship and GC–MS

Fructus Alpiniae zerumbet is widely used in Guizhou province as a miao folk herb with anti‐inflammatory, analgesic, protection against cardiovascular diseases, antihypertension and antioxidant activities. To further investigate the chemical material basis, the spectrum–effect relationship was established using gray relational analysis between the chromatographic fingerprint and its bioactivities. Herein, the fingerprints of essential oils from Fructus Alpiniae zerumbet (EOFAZ) from various sources were determined by gas chromatography mass spectrometry, and the analgesic and anti‐inflammatory bioactivities were investigated using the mouse model of acetic acid‐induced writhing test and dimethylbenzene‐induced mouse ear edema test. Finally, 17 common peaks were identified from nine batches of A. zerumbet, by comparison with the standard mass spectra in Nist2005, Wiley275 library. Meanwhile, the results showed significant analgesic and anti‐inflammatory effects in all of the different sources of EOFAZ. In particularly, peak 1 (α‐pipene), peak 3 (β‐pinene), peak 9 (camphor) and peak 16 (α‐cadinol) might be the main bioactive ingredients for analgesic and anti‐inflammatory activities. The model of the spectrum–effect relationships of EOFAZ was successfully discovered, which provided a novel platform for finding the bioactive components, a theoretical foundation for its further study and helping to establish quality control of Fructus A. zerumbet.     

Strategy for rapid screening of antioxidant and anti‐inflammatory active ingredients in Gynura procumbens (Lour.) Merr. based on UHPLC–Q‐TOF–MS/MS and characteristic ion filtration

Gynura procumbens (Lour.) Merr. is traditionally used as a raw material for making dumplings or steamed stuffed buns, and its fresh leaves are boiled with water for tea. Herein, we established an ultra‐high–performance liquid chromatography–quadrupole time‐of‐flight mass spectrometry (UHPLC–Q‐TOF–MS/MS) combined with characteristic ion filtration (CIF) strategy to rapidly screen active ingredients with antioxidant and anti‐inflammatory properties in G. procumbens. This strategy involved screening the active part of G. procumbens using antioxidation and anti‐inflammatory activity assays; discovering the active compounds by speculating on the active site's chemical composition by UHPLC–Q‐TOF–MS/MS plus CIF; and verifying the active compounds' activities. The ethyl acetate extract (EEAF) of G. procumbens was the major active site. Eighty‐one compounds were identified from the EEAF using UHPLC–Q‐TOF–MS/MS plus CIF. Furthermore, polyphenols such as cynarine, isochlorogenic acids A and isochlorogenic acids C have excellent antioxidizing and anti‐inflammatory activities. This study provides a practical strategy for rapid in vitro screening of the antioxidizing and anti‐inflammatory activities of traditional vegetables and herbs and identification of active ingredients.     

Three‐phase hollow‐fiber liquid‐phase microextraction based on deep eutectic solvent as acceptor phase for extraction and preconcentration of main active compounds in a traditional Chinese medicinal formula

A three‐phase hollow‐fiber liquid‐phase microextraction based on deep eutectic solvent as acceptor phase was developed and coupled with high‐performance capillary electrophoresis for the simultaneous extraction, enrichment, and determination of main active compounds (hesperidin, honokiol, shikonin, magnolol, emodin, and β,β′‐dimethylacrylshikonin) in a traditional Chinese medicinal formula. In this procedure, two hollow fibers, impregnated with n‐heptanol/n‐nonanol (7:3, v/v) mixture in wall pores as the extraction phase and a combination (9:1, v/v) of methyltrioctylammonium chloride/glycerol (1:3, n/n) and methanol in lumen as the acceptor phase, were immersed in the aqueous sample phase. The target analytes in the sample solution were first extracted through the organic phase, and further back‐extracted to the acceptor phase during the stirring process. Important extraction parameters such as types and composition of extraction solvent and deep eutectic solvent, sample phase pH, stirring rate, and extraction time were investigated and optimized. Under the optimal conditions, detection limits were 0.3–0.8 ng/mL with enrichment factors of 6–114 for the analytes and linearities of 0.001–13 μg/mL (r² ≥ 0.9901). The developed method was successfully applied to the simultaneous extraction and concentration of the main active compounds in a formula of Zi‐Cao‐Cheng‐Qi decoction with the major advantages of convenience, effectiveness, and environmentally friendliness.     

Development and optimisation of a novel three‐way extraction technique based on a combination of Soxhlet extraction,membrane assisted solvent extraction and a molecularly imprinted polymer using sludge polycyclic aromatic hydrocarbons as model compounds

A novel technique that integrates extraction and clean‐up into a single step format is reported as part of the search for new sample preparation techniques in the analysis of persistent organic pollutants from complex samples. This was achieved by combining the extraction efficiency of the Soxhlet extractor, the selectivity of a size exclusion membrane and the specificity of a molecularly imprinted polymer for the extraction of polycyclic aromatic hydrocarbons from wastewater sludge followed by quantitation using gas chromatography with time‐of‐flight mass spectrometry. The approach is described as the Soxhlet extraction membrane‐assisted solvent extraction molecularly imprinted polymer technique. This technique was optimised for various parameters such as extraction solvent, reflux time and membrane acceptor phase. The applicability of the developed technique was optimised using a wastewater sludge certified reference material and then tested on real wastewater sludge samples. The method detection limits ranged from 0.14 to 12.86 ng/g with relative standard deviation values for the extraction of the 16 US‐EPA priority polycyclic aromatic hydrocarbons from wastewater sludge samples ranging from 0.78 to 18%. The extraction process was therefore reproducible and showed remarkable selectivity. The developed technique is a promising prospect that can be applied in the analysis of organic pollutants from complex solid samples.