Interfacial properties of the nanostructured dye-sensitized solid heterojunction TiO(2)/RuL(2)(NCS)(2)/CuI

The interfaces of the nanostructured dye-sensitized solid heterojunction TiO(2)/Ru-dye/CuI have been studied using photoelectron spectroscopy of core and valence levels, x-ray absorption spectroscopy and atomic force microscopy. A nanostructured anatase TiO(2) film sensitized with RuL(2)(NCS)(2) [cis-bis(4,4(')-dicarboxy-2,2(')-bipyridine)-bis(isothio-cyanato)-ruthenium(II)] was prepared in a controlled way using a novel combined in-situ and ex-situ (Ar atmosphere) method. Onto this film CuI was deposited in-situ. The formation of the dye-CuI interface and the changes brought upon the dye-TiO(2) interface could be monitored in a stepwise fashion. A direct interaction between the dye NCS groups and the CuI is evident in the core level photoelectron spectra. Concerning the energy matching of the valence electronic levels, the photoelectron spectra indicate that the dye HOMO overlaps in energy with the Cu 3d-I 5p hydrid states. The CuI grow in the form of particles, which at the initial stages displace the dye molecules causing dye-TiO(2) bond breaking. Consequently, the very efficient charge injection channel provided by the dye-TiO(2) carboxylic bonding is directly affected for a substantial part of the dye molecules. This may be of importance for the functional properties of such a heterojunction.     

Rutile TiO2 nanowires on anatase TiO2 nanofibers: a branched heterostructured photocatalysts via interface-assisted fabrication approach

A water-dichloromethane interface-assisted hydrothermal method was employed to grow rutile TiO(2) nanowires (NWs) on electrospun anatase TiO(2) nanofibers (NFs), using highly reactive TiCl(4) as precursor. The water-dichloromethane interface inhibited the formation of rutile NWs in water phase, but promoted the selective radial growth of densely packed rutile NWs on anatase NFs to form a branched heterojunction. The density and length of rutile NWs could be readily controlled by varying reaction parameters. A formation mechanism for the branched heterojunction was proposed which involved (1) the entrapment of rutile precursor nanoparticles at water-dichloromethane interface, (2) the growth of rutile NWs on anatase NFs via Ostwald ripening through the scavengering of interface-entrapped rutile nanoparticles. The heterojunction formed at anatase NF and rutile NW enhanced the charge separation of both under ultraviolet excitation, as evidenced by photoluminescence and surface photovoltage spectra. The branched TiO(2) heterostructures showed higher photocatalytic activity in degradation of rodamine B dye solution than anatase NFs, and the mixture of anatase NFs, and P25 powders, which was discussed in terms of the synergistic effect of enhanced charge separation by anatase-rutile heterojunction, high activity of rutile NWs, and increased specific area of branched heterostructures.     

High resolution photoemission and x-ray absorption spectroscopy of a lepidocrocite-like TiO2 nanosheet on Pt(110) (1 × 2)

The electronic structure of TiO(2) nanosheets on the Pt(110)-(1 × 2) surface has been investigated by using high resolution photoemission spectroscopy and x-ray absorption spectroscopy (XAS). The Ti 2p XAS spectra of the deposited TiO(2) films have been theoretically evaluated and, from the comparison with the experimental data, the assignment to a lepidocrocite-like structure is confirmed. Coexistence of TiO(2) islands with PtO(2) stripes for incomplete nanosheets is confirmed by high resolution photoemission data. The location of the valence and conduction band edges of the nanosheet has been experimentally determined allowing us to describe in details subtle electronic effects due to the interface with the substrate. The locations of the valence band maximum and the leading peak in the O 1s XAS spectrum indicate a band gap similar to anatase but with the Fermi level closer to mid-gap than found for bulk, n-type TiO(2).     

金红石/锐钛矿混晶结构的TiO2薄膜光催化活性

采用磁控溅射法制备出一组金红石/锐钛矿混晶结构的纳米TiO2薄膜催化剂,并通过光催化降解苯酚实验考察该薄膜的催化性能. 光催化实验证明, 随着催化剂中金红石含量减少, 催化剂的光催化活性逐渐提高. X射线衍射(XRD)、X射线光电子能谱(XPS)、表面光电压谱(SPS)和原子力显微镜(AFM)结果表明, 催化剂为金红石和锐钛矿混晶结构, 并随着金红石含量减少, 催化剂的表面羟基(OH)和桥氧(—O—)的含量逐渐增加, 而且费米能级逐渐提高. 表面羟基和桥氧是有利于光催化的“活性物种”; 费米能级的提高使TiO2/H2O 面处TiO2的表面带弯增大, 导致了价带光生空穴参加光催化反应的几率增大, 有效地促进了光生载流子的分离; 这些因素是催化剂光催化活性逐渐提高的主要原因.     

Adsorption-site-dependent electronic structure of catechol on the anatase TiO2(101) surface

The adsorption of catechol (1,2-benzendiol) on the anatase TiO(2)(101) surface was studied with synchrotron-based ultraviolet photoemission spectroscopy (UPS), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). Catechol adsorbs with a unity sticking coefficient and the phenyl ring intact. STM reveals preferred nucleation at step edges and subsurface point defects, followed by 1D growth and the formation of a 2 × 1 superstructure at full coverage. A gap state of ～1 eV above the valence band maximum is observed for dosages in excess of ～0.4 Langmuir, but such a state is absent for lower coverages. The formation of the band gap states thus correlates with the adsorption at regular lattice sites and the onset of self-assembled superstructures.     

Circular dichroism of photoemission of Fe<Subscript>1/4</Subscript>TiTe<Subscript>2</Subscript>

High-resolution ARPES has been employed for examination of angular distribution of valence band photoelectrons emitted by a Fe_1/4TiTe₂ single crystal near the point Γ of the Brillouin zone in the most symmetrical directions ΓK (A-H) and ΓM (A-L) under excitation with synchrotron radiation (21.5 eV, He I) at 50 K. It has been found out that excitation with circular polarized synchrotron radiation results in essential circular dichroism in angular dependence of valence band photoemission of Fe_1/4TiTe₂. Analysis of entire experimental data has revealed that the dichroic effect is also related to the chiral geometry of the experiment. The decrease in symmetry induces dichroism, thus allowing determination of electron states at intercalant atoms.     

Interface electronic states and molecular structure of a triarylamine based hole conductor on rutile TiO2(110)

The molecular and electronic surface structure of a triarylamine based hole-conductor (HC) molecule evaporated onto rutile TiO2(110) single crystal is investigated by means of synchrotron light based photoelectron spectroscopy and x-ray absorption spectroscopy in combination with calculations based on density functional theory. Different amounts of the HC molecule was evaporated spanning the monolayer to multilayer region. The molecular surface structure is investigated and the results indicate that no specific covalent chemical bonding is formed and that the plane formed by the different nitrogens in the HC molecules has a rather small angle versus the TiO2 substrate surface plane. Some molecular ordering also persists in the multilayer region. The experimental core level spectra, valence level spectra, and the N 1s x-ray absorption spectroscopy spectra are well modeled by calculations on an individual molecule. Interestingly, the formation of the TiO2HC interface results in significant binding energy shifts in core levels and valence levels shifting all peaks of a the HC material to the same extent. Smaller shifts were also observed in the substrate core level peaks. The shift is discussed in terms of nanoscale energy level bending and final state hole screening. With respect to electronic applications, specifically in a solid state dye-sensitized solar cell, it is argued that the observed energy level alignment at the TiO2HC interface can act as a hole trap.     

Synthesis, isolation, and redispersion of resorcinarene-capped anatase TiO2 nanoparticles in nonaqueous solvents

C-undodecylcalix[4]-resorcinarene (C(11)-resorcinarene)-capped anatase TiO(2) nanoparticles have been synthesized and could be isolated and redispersed in different nonaqueous solvents. The adsorption of C(11)-resorcinarene onto the surface of TiO(2) nanoparticles led the shifting of the onset wavelength of the optical absorption in the visible range along with a broad band centered at 422 nm corresponding to ligand-to-metal charge transfer transition within the surface titanium(IV)-C(11)-resorcinarene complex. The interaction of TiO(2) nanoparticle with C(11)-resorcinarenes was investigated by photoluminescence (PL). Proton nuclear magnetic resonance ((1)H NMR) spectroscopy study revealed that the C(11)-resorcenarene molecules adsorbed chemically onto the surfaces of TiO(2) nanoparticles. The average particle diameter of bare anatase TiO(2) and C(11)-resorcinarene-capped TiO(2) was determined using transmission electron microscopy (TEM) and was found to be equal to ca. 5 nm.     

Theoretical study of the reduction of uranium(VI) aquo complexes on titania particles and by alcohols

To provide insights into the adsorption and photoreduction of uranium(VI) on TiO(2), we have studied the structural and electronic properties of uranium(VI) aquo complexes adsorbed on stoichiometric and defected TiO(2) surfaces and nanoparticles. Plane wave calculations with the pure PBE density functional and the PBE+U approach were used to study U(VI) complexes on a periodic rutile (110) slab. In addition, a nanoparticulate Ti(38)O(76) cluster was used to simulate anatase nanoparticles. The electronic structures of the adsorbed U(VI) complexes indicate that the photoreduction process is a consequence of the photocatalytic properties of TiO(2). The reduction of the adsorbed complexes can only occur if the energy of the incident photon exceeds the semiconductor band gap. The gap states induced by single or neighboring hydrogen atoms and oxygen vacancies at the rutile (110) surface cannot reduce adsorbed U(VI) complexes as the unoccupied 5f orbitals are found deeper in the conduction band. In the absence of a solid substrate, photoreduction proceeds by abstraction of a hydrogen atom from water or organic molecules present in solution. Photoreduction by chlorophenol results in lower product yield than reduction by aliphatic alcohols. This is because the triplet uranyl-chlorophenol complex is much more stable than similar complexes formed with methanol and ethanol. In the case of water, the hydroxyl photoproduct easily re-oxidizes the pentavalent species formed. In addition, it is easier for the triplet uranyl-water complex to decompose to the photoreactants.     

Electronic structure of methoxy-, bromo-, and nitrobenzene grafted onto Si(111)

The properties of Si(111) surfaces grafted with benzene derivatives were investigated using ultraviolet photoemission spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS). The investigated materials were nitro-, bromo-, and methoxybenzene layers (-C(6)H(4)-X, with X = NO(2), Br, O-CH(3)) deposited from diazonium salt solutions in a potentiostatic electrochemical process. The UPS spectra of the valence band region are governed by the molecular orbital density of states of the adsorbates, which is modified from the isolated state in the gas phase due to molecule-molecule and molecule-substrate interaction. Depending on the adsorbate, clearly different emission features are observed. The analysis of XPS intensities clearly proves multilayer formation for bromo- and nitrobenzene in agreement with the amount of charge transferred during the grafting process. Methoxybenzene forms only a sub-monolayer coverage. The detailed analysis of binding energy shifts of the XPS emissions for determining the band bending and the secondary electron onset in UPS spectra for determining the work function allow one to discriminate between surface dipole layers--changing the electron affinity--and band bending, affecting only the work function. Thus, complete energy band diagrams of the grafted Si(111) surfaces can be constructed. It was found that silicon surface engineering can be accomplished by the electrochemical grafting process using nitrobenzene and bromobenzene: silicon-derived interface gap states are chemically passivated, and the adsorbate-related surface dipole effects an increase of the electron affinity.     

Mo掺杂对纳米TiO2结构和活性的影响

利用Mo6 的掺杂在TiO2中引入缺陷,从而扩大TiO2催化剂的光谱响应范围。运用UV-Vis、XRD、XPS、TG-DTA等测试技术考察了钼离子掺杂浓度对于TiO2光催化剂吸收光谱范围、晶型、晶胞和晶粒的影响,分析了钼进入TiO2品格的方式、价态和掺杂催化剂在热处理过程中发生的物理和化学变化。以亚甲蓝溶液的光催化降解为模型反应,考察了掺杂量对这种新型光催化剂的光催化活性的影响。结果表明,Mo6 可进入TiO2晶格中形成杂质缺陷,引起TiO2品格膨胀,Mo6 的掺杂量影响TiO2晶粒尺寸和晶相转化。Mo6 掺杂的质量分数为4．5％时,样品的吸收带边可达460 nm,对40 mg/L亚甲蓝反应2 h的降解率为58．3％,矿化率为52．5%。而Mo6 的掺杂质量分数为3．0％和6．0％时,形成的TiO2晶粒尺寸较小,TiO2晶粒中锐钛矿相与金红石相的比例接近4:1时,对亚甲蓝降解率分别为56．6％和52．0％,矿化率分别为49．2％和44．2％。     

Electronic Structure and Interface Properties of a Model Molecule for Organic Solar Cells

We study the electronic structure of 4,7‐bis(5‐methylthiophen‐2‐yl)benzo[c][1,2,5]thiadiazole (MTBT) and its interface properties with gold using X‐ray photoemission spectroscopy (XPS), valence‐band ultraviolet photoemission spectroscopy (UPS), X‐ray absorption spectroscopy (XAS), as well as resonant photoemission (ResPES). MTBT can be regarded as a model molecule for PCPDTBT, a promising candidate for efficient bulk heterojunction solar cells. Almost no contribution of sulfur and only a weak contribution of nitrogen to the HOMO level is found. At the interface with gold, a strong chemical interaction between the sulfur of the benzothiadiazole and gold occurs, which may have consequences for interface properties in devices.     

Molecular rectification: application in dye-sensitized solar cells

A dye-sensitized heterojunction of configuration n-TiO2/PD-CuPC-MV/p-CuSCN (where PD = 3,4-pyridinedicarboxylic acid anchored to TiO2, CuPC = copper(II) phthallocyanine tetrasulfonic acid ionically linked to PD, and MV = Methyl Violet complexed to CuPC) is developed to demonstrate the applicability of molecular rectification to dye-sensitized solar cells as a strategy of suppressing recombination. Short-circuit photocurrent, open-circuit voltage, energy conversion efficiency, and incident photon to photocurrent conversion of this system are higher than that of the heterojunctions of configurations n-TiO2/PD-MV/p-CuSCN, n-TiO/CuPC-MV/p-CuSCN, and n-TiO2/MV/p-CuSCN. The impressively high rectification ratio and the mode of anchorage of CuPC toTiO2 are suggested as the cause of superior photovoltaic action of the cell TiO2/PD-CuPC-MV/p-CuSCN.     

Photosensitization of nanoparticulate TiO2 using a Re(I)-polypyridyl complex: studies on interfacial electron transfer in the ultrafast time domain

We have synthesized a new photoactive rhenium(i)-complex having a pendant catechol functionality [Re(CO)(3)Cl(L)] (1) (L is 4-[2-(4'-methyl-2,2'-bipyridinyl-4-yl)vinyl]benzene-1,2-diol) for studying the dynamics of the interfacial electron transfer between nanoparticulate TiO(2) and the photoexcited states of this Re(i)-complex using femtosecond transient absorption spectroscopy. Our steady state absorption studies revealed that complex 1 can bind strongly to TiO(2) surfaces through the catechol functionality with the formation of a charge transfer (CT) complex, which has been confirmed by the appearance of a new red-shifted CT band. The longer wavelength absorption band for 1, bound to TiO(2) through the proposed catecholate functionality, could also be explained based on the DFT calculations. Dynamics of the interfacial electron transfer between 1 and TiO(2) nanoparticles was investigated by studying kinetics at various wavelengths in the visible and near infrared regions. Electron injection into the conduction band of the nanoparticulate TiO(2) was confirmed by detection of the conduction band electron in TiO(2) ([e(-)](TiO(2)(CB))) and the cation radical of the adsorbed dye (1˙(+)) in real time as monitored by transient absorption spectroscopy. A single exponential and pulse-width limited (<100 fs) electron injection was observed. Back electron transfer dynamics was determined by monitoring the decay kinetics of 1˙(+) and .     

形态结构和光电特性对纳米TiO2光催化性能的影响

采用sol-gel法制备了系列纳米TiO2光催化剂,运用X射线衍射、BET比表面测定、紫外漫反射吸收光谱和表面光电压谱等手段对催化剂进行表征,并以乙烯作为光催化反应的指标反应分子,研究了TiO2纳米晶的性质对于光催化活性的影响.随着焙烧温度的升高,TiO2的晶粒逐渐增大,比表面积下降,晶相由锐钛矿向金红石转变,其吸收带边与光伏响应阈值向长波方向移动,氧化－还原能力降低,降解乙烯的转化率迅速下降.     

Molecular ordering in isonicotinic acid on rutile TiO2(110) investigated with valence band photoemission

The adsorption of isonicotinic acid on rutile TiO(2)(110) has been investigated using synchrotron-based valence band photoemission. Structural ordering in multilayer films of the molecules is found to give rise to a strong angular dependence in the valence band intensities when measured using linearly polarized radiation. Molecular ordering in this case is proposed to be induced by intermolecular hydrogen bonding which is found to be highly dependent upon the deposition rate of the isonicotinic acid. Through comparison of the experimental data with density functional calculated valence band spectra of hydrogen-bonded isonicotinic acid molecules, we can account for the angular dependence in terms of the spatial distribution of the molecular orbitals.     

稀土金属掺杂对锐钛矿型TiO2光催化活性影响的理论和实验研究

从理论和实验两方面探讨稀土金属掺杂对锐钛矿型TiO2光催化活性的影响.理论上采用基于密度泛函理论(DFT)的第一性原理,对稀土掺杂TiO2前后的几何结构、能带结构、态密度及电子结构进行了系统的研究.结果表明,Y,La,Gd,Lu,Ce,Eu,Yb和Tb掺杂有助于TiO2光催化活性的提高;而对于Pr,Nd,Pm,Sm,Dy,Ho,Er和Tm掺杂,由于在价带顶和导带底之间形成了较多的可能成为光生电子和空穴的复合中心的杂质能级,故此类稀土的掺杂浓度需要控制在较小的范围内.另一方面,采用溶胶-凝胶法制备了9种稀土金属(RE=Y,Ce,Pr,Sm,Gd,Dy,Ho,Er,Yb)掺杂的TiO2粉体,运用X射线衍射(XRD)和紫外-可见光谱法(UV-Vis)分别表征其晶体结构和光学吸收性质.结果表明,掺杂前后的TiO2均为锐钛矿相,且Ho,Pr,Ce,Sm,Y,Yb和Gd掺杂使TiO2在可见光区的吸收有不同程度的提高.理论预测与实验结果基本一致,且理论研究结果与周期表中稀土元素外层电子轨道排布规律一致,从而揭示了稀土元素掺杂的本质规律,指明了适量的稀土掺杂有利于TiO2光催化活性的提高.     

The band alignment at CdS/Cu2ZnSnSe4 heterojunction interface

Band alignment at CdS/Cu₂ZnSnSe₄ heterojunction interface is studied by X‐ray photoemission spectroscopy. The Cu₂ZnSnSe₄ thin films are prepared by selenization of electrodeposited Cu‐Zn‐Sn precursors. CdS overlayers with different thickness are sequentially grown on the Cu₂ZnSnSe₄ substrate by pulsed laser deposition process. Photoemission spectra are obtained before and after each growth to study the conduction and valence band offsets at the heterojunction interface. The determined conduction band offset of 0.34 eV indicates a spike‐like ‘type I’ band alignment at CdS/Cu₂ZnSnSe₄ interface. The spike will avoid interface recombination, and it is low enough that electron could transfer from the Cu₂ZnSnSe₄ layer to the buffer layer which is suitable for solar cell's fabrication. Copyright © 2012 John Wiley & Sons, Ltd.     

Surfaces and interfaces in short-period GaAs/AlAs superlattices

Photoelectron spectroscopy, in particular the angular resolved photoemission excited by ultraviolet radiation (ARUPS), provides the most direct experimental information about the electron structure of crystals, both of the bulk and of the low-index surfaces. The sensitivity of the method, as well as its difficulties, when applied to GaAs/AlAs superlattices are described. The new periodicity of these man-made crystals in the direction of their growth (e.g., in the layer-by-layer growth in molecular beam epitaxy), is responsible for opening of the new energy gaps (so-called minigaps) in the electron energy bands of crystals forming the superlattice. In addition to the well-known confinement of electrons at the valence and conduction band edges in long-period superlattices, the electron confinement to the interfaces has also been found in the vicinity of minigaps in short-period superlattices. The role of this confinement in the intensities of electrons photoemitted from superlattice surfaces is discussed. Superlattices with different thicknesses in the topmost layers represent systems with a simple change of the surface atomic structure. The predictions of one-dimensional models about a change of the surface-state energy within the band gap with a change of crystal potential termination are tested for the ideally terminated (1 0 0) surface of a very thin superlattice (GaAs)₂(AlAs)₂. The results of the energy distributions of photoemitted electrons, calculated in the one-step model of photoemission, show that the ARUPS experimental observation of surface-state shifts should be possible, at least in larger minigaps. The results indicate the possibility of a straightforward tuning of the electronic structure of the superlattice surface by geometrical means.     

A spectroscopic and electrochemical approach to the study of the interactions and photoinduced electron transfer between catechol and anatase nanoparticles in aqueous solution

We have combined in situ photoelectrochemical and spectroscopic techniques (Attenuated Total Reflection Infrared, ATR-IR, and Resonance Raman Spectroscopy) for the study of the charge-transfer complex formed upon adsorption of catechol on anatase nanoparticles in contact with aqueous acidic solutions. Vibrational spectroscopies reveal the existence of at least two adsorbate configurations: catecholate in a chelate configuration and molecularly adsorbed catechol, with apparent values of -12.3 and -10.5 kJ mol(-1), respectively. These values are significantly less negative than the values reported for anatase colloidal dispersions. The adsorption of both catechol species on the nanoparticulate anatase thin films follows the Freundlich isotherm. As revealed by resonance Raman spectroscopy, only the adsorbed chelating catecholate forms the charge-transfer complex. The electron transfer from the adsorbate to the anatase nanoparticles has been evidenced by the development of a negative photopotential upon 514.5 or 632.8 nm laser illumination of an anatase nanostructured thin film electrode in contact with a catechol solution. The time evolution of the Raman spectra shows an increasing fluorescence indicating that, upon electron injection, catechol polymerization occurs on the TiO2 surfaces. This conclusion is confirmed by in situ ATR-IR measurements, which show a progressive broadening of the catecholate bands together with the appearance of new signals. This study illustrates the benefits of combining electrochemical, infrared, and Raman techniques for the elucidation of processes occurring at the semiconductor/solution interface. Finally, evidence is given on the different adsorption and reactivity behavior found for suspensions and nanoporous thin films under equivalent experimental conditions.