Photodissociation of alkyl iodides in helium nanodroplets. III. Recombination

The recombination of fragments resulting from the photodissociation of (fluorinated) alkyl iodides in helium nanodroplets at a wavelength of 266 nm has been investigated by means of ion imaging techniques. It is found that in the case of CH3I an appreciable fraction of the fragments recombine in the aftermath of the photolysis. The proposed mechanism involves a complete translational relaxation of both photofragments inside the nanodroplets followed by geminate recombination of the fragments. In contrast with CH3I, no recombination is observed for CF3I. This is attributed to the larger masses and the different initial kinetic energies of the fragments produced by the photolysis of CF3I, which strongly diminishes the fragment thermalization efficiency.     

Electronically and sterically tuned trans labilization controls the substitution behaviour of cobaloximes

The kinetics of axial water substitution by cysteine in six different cobaloximes, viz.trans-RCo(Hdmg)(2)H(2)O, where Hdmg = dimethylglyoximate, R = cyclo-C(5)H(9) (c-P), CH(3)CH(2) (Et), CH(3) (Me), C(6)H(5)CH(2) (Bz), C(6)H(5) (Ph) and CF(3)CH(2), were studied as a function of cysteine concentration, temperature and pressure. It was found that cysteine substitutes the coordinated H(2)O molecule trans to the alkyl group with second order rate constants that follow the order of reactivity: c-P > Et > Bz > Me > Ph > CF(3)CH(2). Rate and activation parameters (Deltan H(++), Delta S(++) and Delta V(++)) enable the formulation of a reaction mechanism that can account for the substitution behaviour of the investigated alkylcobaloximes. In particular, a gradual mechanistic changeover from I(d) to I is observed along the series of R groups from c-P to CF(3)CH(2).     

Reactions of halofluorocarbons with group 6 complexes M(C(5)H(5))(2)L (M = Mo, W; L = C(2)H(4), CO). Fluoroalkylation at molybdenum and tungsten, and at cyclopentadienyl or ethylene ligands.

The molybdenum(II) and tungsten(II) complexes [MCp(2)L] (Cp = eta(5)-cyclopentadienyl; L = C(2)H(4), CO) react with perfluoroalkyl iodides to give a variety of products. The Mo(II) complex [MoCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide or perfluorobenzyl iodide with loss of ethylene to give the first examples of fluoroalkyl complexes of Mo(IV), MoCp(2)(CF(2)CF(2)CF(2)CF(3))I (8) and MoCp(2)(CF(2)C(6)F(5))I (9), one of which (8) has been crystallographically characterized. In contrast, the CO analogue [MoCp(2)(CO)] reacts with perfluorobenzyl iodide without loss of CO to give the crystallographically characterized salt, [MoCp(2)(CF(2)C(6)F(5))(CO)](+)I(-) (10), and the W(II) ethylene precursor [WCp(2)(C(2)H(4))] reacts with perfluorobenzyl iodide without loss of ethylene to afford the salt [WCp(2)(CF(2)C(6)F(5))(C(2)H(4))](+)I(-) (11). These observations demonstrate that the metal-carbon bond is formed first. In further contrast the tungsten precursor [WCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide, perfluoro-iso-propyl iodide, and pentafluorophenyl iodide to give fluoroalkyl- and fluorophenyl-substituted cyclopentadienyl complexes WCp(eta(5)-C(5)H(4)R(F))(H)I (12, R(F) = CF(2)CF(2)CF(2)CF(3); 15, R(F) = CF(CF(3))(2); 16, R(F) = C(6)F(5)); the Mo analogue MoCp(eta(5)-C(5)H(4)R(F))(H)I (14, R(F) = CF(CF(3))(2)) is obtained in similar fashion. The tungsten(IV) hydrido compounds react with iodoform to afford the corresponding diiodides WCp(eta(5)-C(5)H(4)R(F))I(2) (13, R(F) = CF(2)CF(2)CF(2)CF(3); 18, R(F) = CF(CF(3))(2); 19, R(F) = C(6)F(5)), two of which (13 and 19) have been crystallographically characterized. The carbonyl precursors [MCp(2)(CO)] each react with perfluoro-iso-propyl iodide without loss of CO, to afford the exo-fluoroalkylated cyclopentadiene M(II) complexes MCp(eta(4)-C(5)H(5)R(F))(CO)I (21, M = Mo; 22, M = W); the exo-stereochemistry for the fluoroalkyl group is confirmed by an X-ray structural study of 22. The ethylene analogues [MCp(2)(C(2)H(4))] react with perfluoro-tert-butyl iodide to yield the products MCp(2)[(CH(2)CH(2)C(CF(3))(3)]I (25, M = Mo; 26, M = W) resulting from fluoroalkylation at the ethylene ligand. Attempts to provide positive evidence for fluoroalkyl radicals as intermediates in reactions of primary and benzylic substrates were unsuccessful, but trapping experiments with CH(3)OD (to give R(F)D, not R(F)H) indicate that fluoroalkyl anions are the intermediates responsible for ring and ethylene fluoroalkylation in the reactions of secondary and tertiary fluoroalkyl substrates.     

Solvation dynamics in aqueous anionic and cationic micelle solutions: sodium alkyl sulfate and alkyltrimethylammonium bromide

Solvation dynamics of the fluorescence probe, coumarin 102, in anionic surfactant, sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na; n = 8, 10, 12, and 14), and cationic surfactant, alkyltrimethylammonium bromide (C(n)H(2n+1)N(CH(3))(3)Br; n = 10, 12, 14, and 16), micelle solutions have been investigated by a picosecond streak camera system. The solvation dynamics in the time range of 10(-10)-10(-8) s is characterized by a biexponential function. The faster solvation time constants are about 110-160 ps for both anionic and cationic micelle solutions, and the slower solvation time constants for sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions are about 1.2-2.6 ns and 450-740 ps, respectively. Both the faster and the slower solvation times become slower with longer alkyl chain surfactant micelles. The alkyl-chain-length dependence of the solvation dynamics in both sodium alkyl sulfate and alkyltrimethylammonium bromide micelles can be attributed to the variation of the micellar surface density of the polar headgroup by the change of the alkyl chain length. The slower solvation time constants of sodium alkyl sulfate micelle solutions are about 3.5 times slower than those of alkyltrimethylammonium bromide micelle solutions for the same alkyl-chain-length surfactants. The interaction energies of the geometry optimized mimic clusters (H(2)O-C(2)H(5)SO(4)(-) and H(2)O-C(2)H(5)N(CH(3))(3)(+)) have been estimated by the density functional theory calculations to understand the interaction strengths between water and alkyl sulfate and alkyltrimethylammonium headgroups. The difference of the slower solvation time constants between sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions arises likely from their different specific interactions.     

Ion-molecule reactions and fragmentation patterns in helium nanodroplets

A study has been made of the ion chemistry of a series of small molecules that have been embedded in helium nanodroplets. In most instances, the molecules H2O, SO2, CO2, CH3OH, C2H5OH, C3H7OH, CH3F, and CH3Cl have been allowed to form clusters, and reactivity within these has been initiated through electron impact ionization. For two of the molecules studied, CF2Cl2 and CF3I, reactivity is believed to originate from single molecules embedded in the droplets. Electron impact on the droplets is thought to first create a helium ion, and formation of molecular ions is then assumed to proceed via a charge hopping mechanism that propagates though the droplet and terminates with charge-transfer to a molecule or cluster. The chemistry exhibited by many of the cluster ions and at least one of the single molecular ions is very different from that observed for the same species in isolation. In most cases, reactivity appears to be dominated by high-energy bond breaking processes as opposed to, in the case of the clusters, ion-molecule reactions. Overall, charge-transfer from He+ does not appear to be a "soft" ionization mechanism.     

Cationic complexes of iridium: diiodobenzene chelation, electrophilic behavior with olefins, and fluxionality of an Ir(I) ethylene complex

The synthesis of a series of dicationic Ir(III) complexes is described. Reaction of Ir(CO)(dppe)I (dppe = 1,2-bis(diphenylphosphino)ethane)) with RI (R = CH(3) and CF(3)) results in formation of the Ir(III) precursors IrR(CO)(dppe)(I)(2) (R = CH(3) (1a) and CF(3) (1b)). Subsequent treatment with AgOTf (OTf = triflate) generates the bis(triflate) analogues IrR(CO)(dppe)(OTf)(2) (R = CH(3) (2a) and CF(3) (2b)), which undergo clean metathesis with NaBARF (BARF = B(3,5-(CF(3))(2)C(6)H(3))(4)(-)) in the presence of 1,2-diiodobenzene (DIB) forming the dicationic halocarbon adducts [IrR(CO)(dppe)(DIB)][BARF](2) (R = CH(3) (3a) and CF(3) (3b)). Complexes 3a and 3b demonstrate facile exchange chemistry with acetonitrile and carbon monoxide forming complexes 4 and 5, respectively. NMR investigation of the mechanism reveals that the process proceeds through an eta(1)-diiodobenzene adduct, where labilization at the coordination site trans to the alkyl group occurs first. Complex 3a reacts with ethylene forming the cationic iridium(I) product [Ir(C(2)H(4))(2)(CO)(dppe)][BARF] (6), which demonstrates fluxional behavior. Variable-temperature NMR studies indicate that the five-coordinate complex 6 undergoes three dynamic processes corresponding to ethylene rotation, Berry pseudorotation, and intermolecular ethylene exchange in order of increasing temperature based on NMR line shape analyses used to determine the thermodynamic parameters for the processes. The DIB adducts 3a and 3b were also found to promote olefin isomerization of 1-pentene, and polymerization/oligomerization of styrene, alpha-methylstyrene, norbornene, beta-pinene, and isobutylene via cationic initiation.     

Hydrogenation of two-electron mixed-valence iridium alkyl complexes

Two-electron mixed-valence complexes of the general formula (tfepma)(3)Ir(2)(0,II)RBr [tfepma = bis(bis(trifluoroethoxy)phosphino)methylamine, MeN[P(OCH(2)CF(3))(2)](2), and R = CH(3) (2), CH(2)C(CH(3))(3) (3)] have been synthesized and structurally characterized and their reactivity with H(2) investigated. Hydrogenation of 2 and 3 proceeds in a cascade reaction to produce alkane upon initial H(2) addition, followed by the formation of the Ir(2)(I,III) binuclear trihydride-bromide complex (tfepma)(3)Ir(2)(I,III)H(3)Br (4) upon the incorporation of a second molecule of H(2). Hydrogenation of two-electron mixed-valence di-iridium alkyl complexes is examined with nonlocal density-functional calculations. H(2) attacks the Ir(II) metal center prior to alkyl protonation to produce an eta(2)-H(2) complex. Transition states link all intermediates to a complex that has the same regiochemistry as the crystallographically determined final product. Calculated atomic charges suggest that the second H(2) molecule is homolytically cleaved within the di-iridium coordination sphere and that a hydrogen atom migrates across the intact Ir-Ir metal bond. These results are consistent with the emerging trend that two-electron mixed-valence cores manage the two-electron chemistry of substrates with facility when hydrogen is the atom that migrates between metal centers.     

Synthesis of C5-symmetric functionalized [60]fullerenes by copper-mediated 5-fold addition of Reformatsky reagents

A variety of Reformatsky reagents were added five times to [60]fullerene in good yield in the presence of a stoichiometric amount of a copper(I) complex. The penta-addition products C60(CH2CO2R)5H (R=Et, t-Bu, CH2CF3, (CH2CH2O)2Et, and CH2CH2CCSiMe3) can then be converted to the corresponding penta-hapto metal complexes. When the R group is a (-)-menthyl group, the corresponding metal complex comprises an organometallic complex with a coordination sphere consisting of a homochiral C5-symmetric environment.     

Conformational analysis and assignments of relative stereocenter configurations in fluoroalkyl-iridium complexes using 19F[1H] HOESY experiments. Comparison with solid-state X-ray structural results

Solution conformations about the metal-carbon bond of the secondary fluoroalkyl ligands in iridium complexes [IrCp(PMe(3))(R(F))X] [Cp* = C(5)Me(5); R(F) = CF(CF(3))(2), X = I (1), CH(3) (2); R(F) = CF(CF(3))(CF(2)CF(3)), X = I (4), CH(3) (5)] have been determined using (19)F[(1)H] HOESY techniques. The molecules adopt the staggered conformation with the tertiary fluorine in the more hindered sector between the PMe(3) and X ligands, with CF(3) (and CF(2)CF(3)) substituents lying in the less hindered regions between PMe(3) and Cp or X and Cp. In molecules containing the CF(CF(3))(2) ligand, these conformations are identical to those adopted in the solid state. For compound 4, containing the CF(CF(3))(CF(2)CF(3)) ligand, two diastereomers are observed in solution. Solution conformations and relative stereocenter configuration assignments have been obtained using (19)F[(1)H] HOESY and correlated with the X-ray structure for the major diastereomer of 4, which has the (S(Ir), S(C)) or (R(Ir), R(C)) configuration. Relative stereocenter configurations of analogue 5, for which no suitable crystals could be obtained, were assigned using (19)F[(1)H] HOESY and proved to be different from 4, with 5 preferring the (S(Ir), R(C)) or (R(Ir), S(C)) configuration.     

Crystal structures and solution behavior of paramagnetic divalent transition metal complexes (Fe, Co) of the sterically encumbered tridentate macrocycles 1,4,7-R3-1,4,7-triazacyclononane: coordination numbers 5 (R = i-Pr) and 6 (R = i-Bu)

The coordination chemistry of the sterically hindered macrocyclic triamines, 1,4,7-R3-1,4,7-triazacyclononane (R = i-Pr, i-Pr3tacn, and R = i-Bu, i-Bu3tacn) with divalent transition metals has been investigated. These ligands form a series of stable novel complexes with the triflate salts MII(CF3SO3)2 (M = Fe, Co, or Zn) under anaerobic conditions. The complexes Fe(i-Pr3tacn)(CF3SO3)2 (2), [Co(i-Pr3tacn)(SO3CF3)(H2O)](CF3SO3) (3), [Co(i-Pr3tacn)(CH3CN)2](BPh4)2 (4), Zn(i-Pr3tacn)(CF3SO3)2 (5), [Fe(i-Bu3tacn)(CH3CN)2(CF3SO3)](CF3SO3) (6), Fe(i-Bu3tacn)-(H2O)(CF3SO3)2 (7), and Co(i-Bu3tacn)(CF3SO3)2 (8) have been isolated. The behavior of these paramagnetic complexes in solution is explored by their 1H NMR spectra. The solid-state structures of four complexes have been determined by X-ray single-crystal crystallography. Crystallographic parameters are as follows. 2: C17H33F6FeN3O6S2, monoclinic, P2(1)/n, a = 10.895(1) A, b = 14.669(1) A, c = 16.617(1) A, beta = 101.37(1) degrees, Z = 4. 3: C17H35CoF6N3O7S2, monoclinic, P2(1)/c, a = 8.669(2) A, b = 25.538(3) A, c = 12.4349(12) A, beta = 103.132(13) degrees, Z = 4. 6: C24H45F6FeN5O6S2, monoclinic, P2(1)/c, a = 12.953(6) A, b = 16.780(6) A, c = 15.790(5) A, beta = 96.32(2) degrees, Z = 4. 7: C20H41F6FeN3O7S2, monoclinic, C2/c, a = 22.990(2) A, b = 15.768(2) A, c = 17.564(2) A, beta = 107.65(1) degrees, Z = 8. The ligand i-Pr3tacn leads to complexes in which the metal ions are five-coordinate, while it's isobutyl homologue affords six-coordinate complexes. This difference in the stereochemistries around the metal center is attributed to steric interactions involving the bulky alkyl appendages of the macrocycles.     

Solvent effects on the infrared spectra of beta-alkoxyvinyl methyl ketones I. Carbonyl and vinyl stretching vibrations

Infrared spectroscopy studies of six beta-alkoxyvinyl methyl ketones, with common structure R(1)O-CR(2)CH-COR(3), where R(1)=R(3)=CH(3), R(2)=H (1); R(1)=C(2)H(5), R(2)=H (2); R(3)=CF(3); R(1)=R(2)=CH(3), R(3)=CF(3) (3); R(1)=C(2)H(5), R(2)=C(6)H(5), R(3)=CF(3) (4); R(1)=C(2)H(5), R(2)=4-O(2)NC(6)H(4), R(3)=CF(3) (5); R(1)=C(2)H(5), R(2)=C(CH(3))(3), R(3)=CF(3) (6) in 11 pure organic solvents of different polarity were undertaken to investigate the solute-solvent interactions and to correlate solvent properties by means of linear solvation energy relationships (LSER) with the carbonyl and vinyl stretching vibrations of existing stereoisomeric forms. It was shown that contrary to simple carbonyl-containing compounds where solvent HBD acidity (alpha) has the largest influence on the nu (CO) band shift to lower wavenumbers, the dipolarity/polarizability (pi) term plays the main role in the interactions of conjugated enones with solvent molecules leading to the nu (CO) and nu (CC) bathochromic band shifts. The trifluoroacetyl group possesses a reduced ability to form hydrogen bonds with solvents. For the nu (CC) band of non-fluorinated enone 1 solvent HBD acidity (alpha) and solvent HBA basicity term (beta) play a perceptible role, whereas for 2 these terms are not significant. beta-Substituents in fluorinated enones such as R(2)=H, C(6)H(5), and C(CH(3))(3) assist in the intermolecular hydrogen bond formation of the carbonyl moiety with HBD solvents, while beta-substituents such as CH(3) and 4-NO(2)C(6)H(4) prevent the CO group to form the H-bonds with HBD solvents (the solvent HBD acidity term (alpha) is not significant). The comparison of four conformers of the enone 1 reveals that (EEE) form is the most polarizable conformer; the influences of the solvent dipolarity/polarizability (pi) and solvent HBD acidity (alpha) term on the bathochromic nu (CO) band shift are opposite to one another.     

Synthesis and structural characterization of group 6 transition metal complexes with terminal fluoromethylidyne (CF) ligands; a DFT/NBO/NRT comparison of bonding characteristics of terminal NO, CF and CH ligands

A family of group 6 transition metal complexes M(C(5)R(5))(CO)(2)(CF) [M = Cr, Mo, W; R = H, Me] with terminal fluoromethylidyne ligands have been synthesized through the reduction of the corresponding trifluoromethyl precursors with potassium graphite or magnesium graphite. They have been characterized spectroscopically and in some cases crystallographically, although the structures show disorder between the CO and CF ligands. The M[triple bond]CF subunit reacts as a triple bond to form cluster complexes containing μ(3)-CF ligands on reaction with Co(2)(CO)(8). Computational (DFT/NBO/NRT) studies on M(C(5)H(5))(CO)(2)(CF) [M = Cr, Mo, W] and the corresponding cationic fragments M(CO)(2)(XY)(+) illustrate significant differences in the metal-ligand bonding between CF and its isoelectronic analogue NO, as well as with its hydrocarbon analogue CH.     

μ-联硫六羰基二铁与芳炔基Grignard试剂加成反应的研究 - “开环”和“闭环”铁硫原子簇配合物的合成、结构及形成机理

芳炔基溴化镁断裂μ-S2Fe2(CO)6的S-S键生成“开环”中间物(μ-ArC≡CS)(μ-BrMgS)Fe(CO)6D及“闭环”中间物μ-[S(Ar)C=C(MgBr)S]Fe2(CO)6E的平衡混合物. 该混合物用Cp(CO)2FeI或某些卤代物处理后生成相应的“开环”铁硫配合物;用CF3CO2H, HBr气体及CH3HgCl处理则得相应“闭环”铁硫配合物; 在与易消除卤化氢的卤代烃反应时也生成“闭环”配合物, 这类卤代烃可能是按消除HX过程而起作用; 对可能的机理进行了讨论.     

Diligating tripodal amido-phosphine ligands: the effect of a proximal antipodal early transition metal on phosphine donor ability in a building block for heterometallic complexes

The ligand precursors P(CH2NH-3,5-(CF3)2C6H3)3 (1a), P(CH2NHPh)3 (1b), and P(CH2NH-3,5-Me2C6H3)3 (1c), react with the reagents Ti(NMe2)4 and tBuN=Ta(NEt2)3 to generate metal complexes of the type P(CH2NAr(R))3TiNMe2 (2a-c) and P(CH2NAr(R))3Ta=NtBu (3a-c) (where Ar(R) = 3,5-(CF3)2C6H3, Ph, and 3,5-Me2C6H3). Due to ring strain, the phosphine lone pair cannot chelate and is available to bind a second metal, and this feature can be utilized to synthesize heterometallic polynuclear complexes. The 31P chemical shifts observed upon complexation of the early transition metals to the amido donors are large and in the opposite direction expected for the increased C-P-C bond angles in these complexes; these unusual shifts are due to P-Ti and P-Ta distances that are significantly shorter than the sum of van der Waals radii. The reaction of 2c with Ni(CO)4 produces at first the bimetallic complex (CO)3Ni[P(CH2N-3,5-Me2C6H3)3TiNMe2] (4c), which gradually converts to the trimetallic complex (CO)2Ni[P(CH2N-3,5-Me2C6H3)3TiNMe2]2 (5c). The effect of the complexation of Ti and Ta fragments on the donor ability of the phosphine ligand was determined by the preparation of the bis-phosphine complexes trans-L(2)Rh(CO)Cl, (where L = 1a-c, 2a-c, and 3a-c) prepared by the reaction of the appropriate phosphine with [Rh(CO)2(mu-Cl)]2, and a measurement of the resultant CO stretching frequencies. Surprisingly, the complexes with the larger C-P-C angles are significantly poorer donors. Density functional theory calculations were performed to determine what factors affect the donor ability of the phosphine and if through-space interactions might play an important role in the observed electronic properties.     

Convenient syntheses of fluorous aryl iodides and hypervalent iodine compounds: ArI(L)n reagents that are recoverable by simple liquid/liquid biphase workups,and applications in oxidations of hydroquinones

Iodinations of the ortho, meta, and para fluorous arenes (R(f8)CH(2)CH(2)CH(2))(2)C(6)H(4) (R(f8)=(CF(2))(7)CF(3)) with I(2)/H(5)IO(6) in AcOH/H(2)SO(4)/H(2)O give 3,4-(R(f8)CH(2)CH(2)CH(2))(2)C(6)H(3)I (5) and the analogous 2,4- (6) and 2,5- (7) isomers, respectively. Spectroscopic yields are >90 %, but 5 and 7 must be separated by chromatography from by-products (yields isolated: 70 %, 97 %, 61 %). Reaction of 1,3,5-(R(f8)CH(2)CH(2)CH(2))(3)C(6)H(3) with PhI(OAc)(2)/I(2) gives 2,4,6-(R(f8)CH(2)CH(2)CH(2))(3)C(6)H(2)I (8) on multigram scales in 97 % yield. The CF(3)C(6)F(11)/toluene partition coefficients of 5-8 (24 degrees C: 69.5:30.5 (5), 74.7:25.3 (6), 73.9:26.1 (7), 98.0:2.0 (8)) are lower than those of the precursors, but CF(3)C(6)F(11)/MeOH gives higher values (97.0:3.0 (5), 98.6:1.4 (6), 98.0:2.0 (7), >99.3:<0.3 (8)). Reactions of 5-8 with excess NaBO(3) in AcOH yield the corresponding ArI(OAc)(2) species 9-12 (9, 85 % as a 90:10 9/5 mixture; 10, 97 %; 11, 95 %; 12, 93 % as a 95:5 12/8 mixture). These rapidly oxidize 1,4-hydroquinones in MeOH. Subsequent additions of CF(3)C(6)F(11) give liquid biphase systems. Solvent removal from the CF(3)C(6)F(11) phases gives 5-8 in >99-98 % yields, and solvent removal from the MeOH phases gives the quinone products, normally in >99-95 % yields. The recovered compounds 5-8 are easily reoxidized to 9-12 and used again.     

C-H cleavage and double alkyl additions to the disulfido ligand in dicyanido-bridged Ru2S2 complexes

Novel dicyanido-bridged dicationic RuIIISSRuIII complexes [{Ru(P(OCH3)3)2}2(mu-S2)(mu-X)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (4, X=Cl, Br) were synthesized by the abstraction of the two terminal halide ions of [{RuX(P(OCH3)3)2}2(mu-S2)(mu-X)2] (1, X=Cl, Br) followed by treatment with m-xylylenedicyanide. 4 reacted with 2,3-dimethylbutadiene to give the C4S2 ring-bridged complex [{Ru(P(OCH3)3)2}2{mu-SCH2C(CH3)=C(CH3)CH2S}(mu-X)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (6, X=Cl, Br). In addition, 4 reacted with 1-alkenes in CH3OH to give alkenyl disulfide complexes [{Ru(P(OCH3)3)2}2{mu-SS(CH2C=CHR)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3) (7: R=CH2CH3, 9: R=CH2CH2CH3) and alkenyl methyl disulfide complexes [{Ru(P(OCH3)3)2}2{mu-S(CH3)S(CH2C=HR)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (8: R=CH2CH3, 10: R=CH2CH2CH3) via the activation of an allylic C-H bond followed by the elimination of H+ or condensation with CH3OH. Additionally, the reaction of 4 with 3-penten-1-ol gave [{Ru(P(OCH3)3)2}2{mu-SS(CH2C=CHCH2OH)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3) (11) via the elimination of H+ and [{Ru(P(OCH3)3)2}2(mu-SCH2CH=CHCH2S)(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (12) via the intramolecular elimination of a H2O molecule. 12 was exclusively obtained from the reaction of 4 with 4-bromo-1-butene.     

Multi-electron reduction from alkyl/hydride ligand combinations in U4+ complexes

The U4+ mixed alkyl hydride complex (C5Me5)U[mu-C5Me3(CH2)2](mu-H)2U(C5Me5)2, 1, which contains a cyclopentadienyl ligand with two metalated methylene substituents, can effect four, six, and eight-electron reductions in which the combination of the two H1- ligands and the [C5Me3(CH2)2]3- moiety delivers four electrons and forms (C5Me5)1-. The reaction is formally equivalent to an alkyl hydride reductive elimination, a transformation common with transition metals not previously observed with f element compounds. This type of alkyl hydride reduction reactivity is also observed with a combination of U4+ alkyl and hydride complexes, (C5Me5)2UMe2/[(C5Me5)2UH2]2, which reduces benzene to make [(C5Me5)2U]2(C6H6), a U3+ complex formally containing a (C6H6)2- ligand.     

Binuclear half-sandwich cobalt(III) and rhodium(III) ortho-carboranedichalocogenolato complexes with ether chain-bridged bis(cyclopentadienyl) ligand

1, 1'-(3-Oxapentamethylene)dicyclopentadiene [O(CH(2)CH(2)C(5)H(5))(2)], containing a flexible chain-bridged group, was synthesized by the reaction of sodium cyclopentadienide with bis(2-chloroethyl) ether through a slightly modified literature procedure. Furthermore, the binuclear cobalt(III) complex O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(CO)I(2)](2) and insoluble polynuclear rhodium(III) complex {O[CH(2)CH(2)(eta(5)-C(5)H(4))RhI(2)](2)}(n) were obtained from reactions of with the corresponding metal fragments and they react easily with PPh(3) to give binuclear metal complexes, O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))I(2)](2) and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))I(2)](2), respectively. Complexes react with bidentate dilithium dichalcogenolato ortho-carborane to give eight binuclear half-sandwich ortho-carboranedichalcogenolato cobalt(III) and rhodium(III) complexes O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))](2)Co(2)(E(2)C(2)B(10)H(10)) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(E(2)C(2)B(10)H(10))](2) (E = S and Se and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se). All complexes have been characterized by elemental analyses, NMR spectra ((1)H, (13)C, (31)P and (11)B NMR) and IR spectroscopy. The molecular structures were determined by X-ray diffractometry.     

Synthesis, spectroscopic, and structural studies on transition metal complexes involving homoleptic tripodal selenoether and telluroether coordination

The reaction of [MCl2(NCMe)2] (M = Pd or Pt) with 2 molar equiv of MeC(CH2ER)3 (E = Se, R = Me; E = Te, R = Me or Ph) and 2 molar equiv of TlPF6 affords the bis ligand complexes [M(MeC(CH2ER)3)2][PF6]2. The crystal structure of [Pt(MeC(CH2SeMe)3)2][PF6]2 (C16H36F12P2PtSe6, a = 12.272(10) A, b = 18.563(9) A, c = 15.285(7) A, beta = 113.18(3) degrees, monoclinic, P2(1)/n, Z = 4) confirms distorted square planar Se4 coordination at Pt(II), derived from two bidentate tripod selenoethers with the remaining arm not coordinated and directed away from the metal center. Solution NMR studies indicate that these species are fluxional and that the telluroether complexes are rather unstable in solution. The octahedral bis tripod complexes [Ru(MeC(CH2SMe)3)2][CF3-SO3]2 and [Ru(MeC(CH2TePh)3)2][CF3SO3]2 are obtained from [Ru(dmf)6][CF3SO3]3 and tripod ligand in EtOH solution. The thioether complex (C18H36F6O6RuS8, a = 8.658(3) A, b = 11.533(3) A, c = 8.659(2) A, alpha = 108.33(2) degrees, beta = 91.53(3) degrees, gamma = 106.01(2) degrees, triclinic, P1, Z = 1) is isostructural with its selenoether analogue, involving two facially coordinated trithioether ligands in the syn configuration. NMR spectroscopy confirms that this configuration is retained in solution for all of the bis tripod Ru(II) complexes. These low-spin d6 complexes show unusually high ligand field splittings. The hexaselenoether Rh(III) complex [Rh(MeC(CH2SeMe)3)2][PF6]3 was obtained by treatment of [Rh(H2O)6]3+ with 2 molar equiv of MeC(CH2SeMe)3 in aqueous MeOH in the presence of excess PF6- anion, while the iridium(III) analogue [Ir(MeC(CH2SeMe)3)2][PF6]3 was obtained via the reaction of the Ir(I) precursor [IrCl(C8H14)2]2 with the selenoether tripod in MeOH/aqueous HBF4. NMR studies reveal different invertomers in solution for both the Rh and Ir species. The Cu(I) complexes [Cu(MeC(CH2ER)3)2]PF6 were obtained from [Cu(NCMe)4]PF6 and tripod ligand in CH2Cl2 solution. The corresponding Ag(I) species [Ag(MeC(CH2TeR)3)2]CF3SO3 (R = Me or Ph) were obtained from Ag[CF3SO3] and tripod telluroether. In contrast, a similar reaction with 2 molar equiv of MeC(CH2SeMe)3 afforded only the 1:1 complex [Ag(MeC(CH2SeMe)3)]CF3SO3. The structure of this species (C9H18AgF3O3SSe3, a = 8.120(3) A, b = 15.374(3) A, c = 14.071(2) A, beta = 93.86(2) degrees, monoclinic, P2(1)/n, Z = 4) reveals a distorted trigonal planar geometry at Ag(I) derived from one bidentate selenoether and one monodentate selenoether. These units are then linked to adjacent Ag(I) ions to give a one-dimensional linear chain cation.     

Organometallic chemistry of fluorinated allenes

Reaction of 1,1-difluoroallene and tetrafluoroallene with a series of transition metal complex fragments yields the mononuclear allene complexes [CpMn(CO)(2)(allene)] (1), [(CO)(4)Fe(allene)] (2), [(Ph(3)P)(2)Pt(C(3)H(2)F(2))] (4), [Ir(PPh(3))(2)(C(3)H(2)F(2))(2)Cl] (5), and the dinuclear complexes [mu-eta(1)-eta(3)-C(3)H(2)F(2))Fe(2)(CO)(7)] (3), [Ir(PPh(3))(C(3)H(2)F(2))(2)Cl](2) (6), and [mu-eta(2)-eta(2)-C(3)H(2)F(2))(CpMo(CO)(2))(2)] (9), respectively. In attempts to synthesize cationic complexes of fluorinated allenes [CpFe(CO)(2)(C(CF(3))=CH(2))] (7a), [CpFe(CO)(2)(C(CF(3))=CF(2))] (7b) and [mu-I-(CpFe(CO)(2))(2)][B(C(6)H(3)-3,5-(CF(3))(2))(4)] were isolated. The spectroscopic and structural data of these complexes revealed that the 1,1-difluoroallene ligand is coordinated exclusively with the double bond containing the hydrogen-substituted carbon atom. 1,1-Difluoroallene and tetrafluoroallene proved to be powerful pi acceptor ligands.