以淀粉溶液为催化剂锅三组分法合成四氢苯并[b]吡喃和3,4-二氢吡喃并[c]苯并吡喃衍生物简

Tetrahydrobenzo[b]pyran and 3,4-dihydropyrano[c]chromene derivatives were synthesized via a one-pot three-component condensation of aromatic aldehydes with malononitrile and dimedone or 4-hydroxycoumarin in excellent yields in the presence of starch solution as a highly efficient homogenous catalyst. The use of a nontoxic and biodegradable catalyst, simple work-up procedure, and short reaction time are advantages of this method.     

Chemoselective hydrolysis of tert-butyl esters in acetonitrile using molecular iodine as a mild and efficient catalyst

A simple, mild and efficient method for the hydrolysis of tert-butyl esters using molecular iodine as a catalyst is described. Acid labile protecting groups, such as N-Boc, OBn, OAc and double bonds, are compatible under the reaction conditions.     

A new synthesis of (−)-thioambrox and its 8-epimer

This new and straightforward synthesis of (−)-thioambrox 2, a sulphur compound whose odour resembles ambergris, starts from sclareolide 4. The stereoselectivity of the final cyclization is independent of the catalyst selected, and compound 2 is always favoured over (+)-iso-thioambrox 3. With hydrochloric acid as catalyst, the cyclization is unexpectedly stereospecific to give 2 in high yield at room temperature.     

Molecular sieves: an efficient and reusable catalyst for multi-component synthesis of dihydropyrano[2,3-C]pyrazole derivatives

An efficient synthesis of dihydropyrano[2,3-C]pyrazole derivatives catalyzed by molecular sieves in ethanol under reflux and ultrasound irradiation has been described. The efficiency of catalyst has been compared with other aluminates and silicate based catalyst in order to optimize catalyst for the said organic transformation. This protocol is very useful due to easy recovery of the catalyst and its reusability, short reaction time, excellent yields, and avoidance of environmentally hazardous solvents.     

Environmentally friendly synthesis of 2-aryl-2,3-dihydroquinazolin-4(1H)-ones by novel Co-CNTs as recoverable catalysts

The objective of this study is to investigate the possibility of using Co-CNTs as a green reaction medium and a catalyst for the cyclo-condensation of o-aminobenzamide with various aldehydes. This inexpensive, non-toxic, and readily available catalyst efficiently catalyzes the above condensation for the synthesis of 2-aryl-2,3-dihydroquinazolin-4(1H)-ones. Compared to the classical reaction, this is a simple, highly yielding, time saving, and environmentally friendly method.     

Oxidation of alkenes with non-heme iron complexes: suitability as an organic synthetic method

In the course of a preliminary study to determine the preparative value and the synthetic applications of the non-heme iron(II) complexes Fe(bpmen)(OTf)₂ and Fe(tpa)(OTf)₂, in particular the oxidation of alkenes by using hydrogen peroxide as the terminal oxidant, we have found significant differences in catalyst behavior. After several attempts it was clear that the preparative relevance of the oxidation processes was linked to the concentration of the catalyst and optimal results were obtained when the concentration value was 5 mol %. At that concentration, the Fe(bpmen)(OTf)₂ catalyst mostly gave rise to mixtures of the epoxide and the trans-dihydroxylation products formed by water-assisted hydrolytic cleavage of the epoxides. Furthermore, the use of the tripodal ligand tpa led to cis dihydroxylation products. When deactivated olefins were used as substrates for the oxidation reaction, the cis-diols were obtained exclusively, although with modest conversions, regardless of the catalyst used.     

液-固相体系中以聚(N-乙烯基咪唑)为非均相碱性催化剂在超声波照射和无溶剂条件下催化不同醛和酮羟醛缩合(英文)

An ultrasound‐assisted aldol condensation reaction has been developed for a range of ketones with a variety of aromatic aldehydes using poly(N‐vinylimidazole) as a solid base catalyst in a liquid‐solid system. The catalyst can be recovered by simple filtration and reused at least 10 times without any significant reduction in its activity. The reaction is also amenable to the large scale, making the procedure potentially useful for industrial applications.     

First Kumada reaction of alkyl chlorides using N-heterocyclic carbene/palladium catalyst systems

For the first time it is shown that N-heterocyclic carbenes are suitable ligands for the palladium-catalyzed coupling of alkyl chlorides with aryl Grignard reagents. A variety of simple as well as functionalized primary alkyl chlorides provide the corresponding alkyl benzenes in general in good to very good yield. By comparing the 1,3-dimesitylimidazol-2-ylidene (IMes) palladium(0) naphthoquinone complex with the previously known palladium phosphine catalyst for the model coupling reaction of 1-chlorohexane with phenylmagnesium bromide it is demonstrated that the new catalyst system is superior.     

A facile and highly chemoselective synthesis of 1,2-disubstituted benzimidazoles using hierarchical nanoporous material

A highly ordered nanoporous aluminosilicate (MMZ_Y) is prepared and employed as a catalyst for the synthesis of benzimidazoles from 1,2-diaminobenzene and aromatic aldehydes. In all the cases, the reactions are highly chemoselective and afford 1,2-disubstituted benzimidazoles in excellent yield. The catalyst was characterized by electron microscopy and X-ray methods and its other advantages like functional tolerance, mildness of the reaction conditions, easy separation, and reusability are also highlighted.     

Tethering of nickel(II) Schiff-base complex onto mesoporous silica: An efficient heterogeneous catalyst for epoxidation of olefins

A new hybrid catalyst has been prepared by tethering a nickel(II) Schiff-base complex via post-synthesis modification of mesoporous silica, MCM-41. The Schiff-base has been derived from salicylaldehyde and 3-aminopropyltriethoxysilane (3-APTES) which is chemically anchored on MCM-41 via silicon alkoxide route. The anchored Schiff-bases imposed a stable planar coordination geometry around the central nickel ions. The catalyst has been characterized by elemental analysis, FT-IR, UV-Vis, small angle X-ray diffraction (SAX) and transmission electron microscopy (TEM) studies. The SAX and TEM measurement showed the mesoporosity of the catalyst. The activity of the catalyst has been assessed in the epoxidation of olefins using tert-butyl-hydroperoxide (tert-BuOOH) as oxidant in heterogeneous condition. Immobilized nickel catalyst was found to be catalytically more active and selective compared to the similar type of nickel(II) complex as well as Ni(NO₃)₂·6H₂O in homogeneous media. The catalyst can be recycled and reused several times without significant loss of activity.     

Synthesis and characterization of 9-methyl-2-morpholin-4-yl-8-substituted phenyl-1H-purine derivatives using polyphosphoric acid (PPA) as an efficient catalyst

We demonstrate the synthesis of various purine derivatives through the coupling of N⁴-methyl-2-morpholin-4-yl-pyrimidine-4,5-diamine with various aldehydes by using polyphosphoric acid (PPA) as an efficient catalyst in DMF at reflux temperature. The PPA catalyst gave better yields (70-85%) in short reaction times (45-60 min). This commercially available cheap catalyst is more active than many reported expensive catalysts. Many aldehydes underwent the above conversion to form a series of 9-methyl-2-morpholin-4-yl-8-phenyl-9H-purines.     

Brønsted acid-catalyzed simple and efficient synthesis of 1,2,4-triazoles and 1,2,4-oxadiazoles using 2,2,2-trichloroethyl imidates in PEG

A facile and highly efficient synthesis of 3,4,5-trisubstituted 1,2,4-triazoles and 3,5-disubstituted 1,2,4-oxadiazoles from 2,2,2-trichloroethyl imidates using PEG as a solvent and employing PTSA as the catalyst under mild conditions is described.     

Preparation of N-arylpiperazines and other N-aryl compounds from aryl bromides as scaffolds of bioactive compounds

Aryl bromides are coupled with N-compounds to give the corresponding arylamines in the presence of a palladium catalyst, a suitable ligand, and a weak base. The catalysts perform well for a large number of different starting material combinations at 100-150 °C with drops of toluene or without solvent, and with low catalyst levels (0.12 mol % Pd). The low catalyst amount makes the process environment friendly.     

Efficient, solventless N-Boc protection of amines carried out at room temperature using sulfamic acid as recyclable catalyst

A simple, rapid, and efficient protocol for the chemoselective N-Boc protection of amines using sulfamic acid as catalyst is described. N-Boc protection of various structurally diverse aliphatic, aromatic, alicyclic, and heterocyclic amines (1°, 2°, 3°) was carried out with (Boc)₂O using sulfamic acid as catalyst (5 mol %) at room temperature under solventless conditions. The advantages of this method are simplicity, shorter reaction times (1-15 min), a cost-effective catalyst, and excellent isolated yields (90-100%); it is also environmentally benign. Moreover, the combined use of ultrasound and sulfamic acid achieves a synergic effect that is especially marked in the N-Boc protection of deactivated (sterically hindered and electron-deficient) amines. The catalyst possesses distinct advantages: ease of handling, cleaner reactions, high activity, and excellent chemoselectivity.     

An efficient protocol for the synthesis of quinoxaline derivatives at room temperature using molecular iodine as the catalyst

The use of molecular iodine as the catalyst for a one-pot synthesis of quinoxaline derivatives at room temperature is reported.     

Cupric chloride promoted regioselective C-allylation of enaminones

Regioselective allylation of enaminones using CuCl₂ as the catalyst to give C-allylated products is reported for the first time. The C-allylated products undergo hydrolysis followed by a rearrangement yielding β-keto allyl enamides in excellent yields.     

Silica-bonded S-sulfonic acid: an efficient and recyclable solid acid catalyst for the synthesis of 4,4′-(arylmethylene)bis(1H-pyrazol-5-ols)

Silica-bonded S-sulfonic acid (SBSSA) is employed as a recyclable catalyst for the condensation reaction of aromatic aldehydes with 3-methyl-l-phenyl-5-pyrazolone. This condensation reaction was performed in ethanol under refluxing conditions giving 4,4′-alkylmethylene-bis(3-methyl-5-pyrazolones) in 75-90% yields.     

二氧化硅键合丙基哌-N-氨基磺酸作为可回收固体酸催化剂制备2-氨基-3-氰基-4-芳基-5,10-二氧代-5,10-二氢-4H-苯并[g]苯并吡喃和羟基取代的萘-1,4-二酮衍生物FahimeKhorami,HamidRezaShaterian简

An efficient method for the synthesis of 2-amino-3-cyano-4-aryl-5,10-dioxo-5,10-dihydro-4H-benzo[g]chromenes and hydroxy-substituted naphthalene-1,4-dione derivatives, using silica-bonded propylpiperazine-N-sulfamic acid as a solid acid, green, heterogeneous catalyst, under ambient and solvent-free conditions, is described. A simple procedure, high yields, short reaction time, safety, and reusability of the catalyst are advantages of these protocols.     

Ti(IV)-based catalytic membranes for efficient and selective oxidation of secondary amines

The incorporation of homogenous Ti(IV)/trialkanolamine catalyst in polymeric membranes provided new polymeric catalytic Ti(IV)-based membranes, stable and efficient as heterogeneous catalysts for chemoselective oxidations of secondary amines to nitrones by alkyl hydroperoxides. Polyvinylidene fluoride (PVDF)-based catalytic membranes gave the best results affording products in short reaction times, high yields and selectivity using as little as 1% of catalyst, comparable with the performances of the corresponding homogeneous system. PVDF-Ti membrane could be recycled up to five runs with no loss of activity.     

N-Butyl-2,4-dinitro-anilinium p-toluenesulfonate as a highly active and selective esterification catalyst

N-Butyl-2,4-dinitro-anilinium p-toluenesulfonate (1) was found to be a very active esterification catalyst that promotes condensation of equal mole amount of carboxylic acids and alcohols under mild conditions. This catalyst is also highly selective towards carboxylic acid and alcohol substrates at ambient temperature.