Efficient syntheses of ethyl 4-cyano-5-hydroxy-2-methyl-1H-pyrrole-3-carboxylate and ethyl (2Z)-(4-cyano-5-oxopyrrolidin-2-ylidene)ethanoate

Ethyl 2-chloroacetoacetate and its 4-chloro isomer react with cyanoacetamide in the presence of the mild, nonnucleophilic base, triethylamine under stoichiometric conditions to give high yields of ethyl 4-cyano-2-hydroxy-2-methyl-5-oxopyrrolidine-3-carboxylate and ethyl (4-cyano-2-hydroxy-5-oxopyrrolidin-2-yl)acetate, respectively. These, under acid-catalyzed dehydration conditions, afforded ethyl 4-cyano-5-hydroxy-2-methyl-1H-pyrrole-3-carboxylate and ethyl (2Z)-(4-cyano-5-oxopyrrolidin-2-ylidene)ethanoate, respectively. Similarly, the 4-chloro isomer reacted with ethyl cyanoacetate to give the novel product, diethyl 2-cyano-4-oxohexanedioate. The use of triethylamine enables access to a whole new library of pyrrole derivatives from easily accessible, commercially available starting materials. The reactions described in this Letter enable access to libraries of important pyrrole systems in any of the isotopically enriched forms.     

Synthesis of 4-(2-hydroxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-aryl-4,5-dihydro-1H-pyrrole-3-carboxylates, a new triazafulvalene system

(2E,3Z)-2-(1-Methyl-2,5-dioxoimidazolidin-4-ylidene)-3-[(arylamino- or heteroarylamino)methylene]succinate 5 obtained by [2+2] cycloaddition of (5Z)-5-[(dimethylamino)methylene]-3-methylimidazolidine-2,4-dione (1) and dimethyl acetylenedicarboxylate (2) followed by substitution of the dimethylamino group with aromatic or heteroaromatic amines, afforded by heating in ethanol in the presence of potassium hydroxide, potassium salts 6. Acidification of 6 with hydrochloric acid afforded mixtures of (E)- and (Z)-isomers of methyl 4-(2-hydroxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-phenyl-4,5-dihydro-1H-pyrrole-3-carboxylates. On the other hand, alkylation of compounds 6 with methyl iodide or benzyl bromide produced the corresponding methyl (E)-4-(2-methoxy- or 2-benzyloxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-phenyl-4,5-dihydro-1H-pyrrole-3-carboxylates 9, derivatives of a new triazafulvalene system.     

Transformations of 5-(2-arylethynyl)-2-methyl-2H-tetrazoles under superelectrophilic activation

Reaction of 5-arylethynyl-2-methyl-2H-tetrazoles (acetylene tetrazoles) with arenes under the action of Brønsted superacid CF₃SO₃H or acidic zeolite HUSY CBV-720 gives rise to E-/Z-5-(2,2-diarylethenyl)-2-methyl-2H-tetrazoles, as products of hydroarylation of acetylene bond, in yields up to 98% with predominant formation of E-isomers. Cationic intermediates of these reactions have been studied theoretically by DFT calculations. Addition of CF₃SO₃H to the triple bond of acetylene tetrazoles leads to the corresponding E-/Z-vinyl triflates in high yields. Hydration of triple bond in these tetrazoles in H₂SO₄ results in the formation of 5-(2-aryl-2-oxoethyl)-2-methyl-2H-tetrazoles. Tandem hydroarylation-ionic hydrogenation of acetylene tetrazoles in the systems acid(CF₃SO₃H or AlCl₃)-arene-cyclohexane affords 5-(2,2-diarylethyl)-2-methyl-2H-tetrazoles.     

Five-membered 2,3-dioxoheterocycles: LXIV. Reactions of 1-methyl-3,4-dihydroisoquinolines with 5-arylfuran-2,3-diones and (Z)-alkyl 4-aryl-2-hydroxy-4-oxobut-2-enoates. Crystal and molecular structure of (2Z,5Z)-3-hydroxy-5-{8,8-dimethyl-2,3,8,9-tetrahydro[1,4]dioxino[2,3-g]isoquinolin-6(7H)-ylidene}-1-phenylpent-2-ene-1,4-dione

5-Arylfuran-2,3-diones and (Z)-alkyl 4-aryl-2-hydroxy-4-oxobut-2-enoates react with 3,3-dialkyl-1-methyl-3,4-dihydroisoquinolines to give (2Z,5Z)-1-aryl-3-hydroxy-5-[3,3-dialkyl-3,4-dihydroisoquinolin-1(2H)-ylidene]pent-2-ene-1,4-diones whose structure has been proved by XRD analysis.     

Efficient synthesis of the cyclopentanone fragrances (Z)-3-(2-oxopropyl)-2-(pent-2-en-1-yl)cyclopentanone and Magnolione

This paper describes the selective syntheses of two cis-isomer-enriched cyclopentanone fragrances: (Z)-3-(2-oxopropyl)-2-(pent-2-en-1-yl)cyclopentanone (four steps, 62% overall yield, 67% cis) and Magnolione^® (five steps, 60% overall yield, 55% cis). In addition, the asymmetric synthesis of (3aR,7aS)-5-methyl-2,3,3a,4,7,7a-hexahydro-1H-inden-1-one as well as (3a′R,7a′S)-5′-methyl-2′,3′,3a′,4′,7′,7a′-hexahydrospiro[[1,3]dioxolane-2,1′-indene] has been realized by an efficient kinetic resolution, which enables the selective synthesis of the 2S,3R-isomer-enriched 3 and 4.     

Five-membered 2,3-dioxo heterocycles: CVI. Acylation of substituted (Z)-2-[1,3,4,4a,5,10b-Hexahydrophenanthridin-6(2H)-ylidene]acetamide with aroylketenes. crystal and molecular structure of substituted N-{(Z)-2-[1,3,4,4a,5,10b-Hexahydrophenanthridin-6(2H)-ylidene]acetyl}acrylamide

Aroylketenes generated by thermolysis of 6-aryl-2,2-dimethyl-4H-1,3-dioxin-4-ones reacted with (Z)-2-[4a,7,10-trimethyl-1,3,4,4a,5,10b-hexahydrophenanthridin-6(2H)-ylidene]acetamide to give (Z)-3-aryl-3-hydroxy-N-{(Z)-2-[4a,7,10-trimethyl-1,3,4,4a,5,10b-hexahydrophenanthridin-6(2H)-ylidene]acetyl}acrylamides whose structure was confirmed by X-ray analysis.     

Synthesis,spectroscopic characterization and thermal behavior of metal complexes formed with (Z)-2-oxo-2-(2-(2-oxoindolin-3-ylidene)hydrazinyl)-N-phenylacetamide (H2OI)

Complexes of Co(II), Ni(II), Cu(II), Cd(II), Zn(II) and U(IV)O₂ with (Z)-2-oxo-2-(2-(2-oxoindolin-3-ylidene)hydrazinyl)-N-phenylacetamide (H₂OI) are reported and have been characterized by various spectroscopic techniques like (IR, UV–Vis, ESR ¹H and ¹³C NMR) as well as magnetic and thermal (TG and DTA) measurements. It is found that the ligand behaves as a neutral tridentate, neutral tetradentate, monoanionic tridentate, monoanionic tridentate and dianionic tridentate. An octahedral geometry for all complexes except [Cu₂(H₂OI)(OAc)₄](H₂O)₂ and [Cu(HOI)Cl](H₂O)₂ which have a square planar geometry. Furthermore, kinetic parameters were determined for each thermal degradation stage of some studied complexes using Coats–Redfern and Horowitz–Metzger methods. The bond lengths, bond angles, HOMO, LUMO and dipole moments have been calculated to confirm the geometry of the ligand and the investigated complexes.     

Regioselective synthesis of 5-alkylidene and 5-(iodoalkylidene)-pyrrol-2(5H)-ones by halolactamisation of (2Z,4E)-dienamides and (Z)-alk-2-en-4-ynamides

Stereo- and regioselective synthesis of 5-alkylidene (arylidene) and 5-(iodoalkylidene)-pyrrol-2(5H)-ones was achieved from (2Z,4E)-dienamides and (Z)-alk-2-en-4-ynamides by halocyclisation reaction. Selectivity was found to be highly dependent on the nature of the substituents and on the temperature.     

Novel (E)- and (Z)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles from (E)- and (Z)-3-styrylchromones: the unexpected case of (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles

An efficient synthetic method for the preparation of (E)- and (Z)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles has been developed. The reaction of (E)- and (Z)-3-styrylchromones with hydrazine hydrate afforded the corresponding (E)- and (Z)-4-styrylpyrazoles, respectively, saved 4′-nitro-derivatives where both (E)- and (Z)-4′-nitro-3-styrylchromones afforded (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles. The reaction mechanism for these transformations was discussed and the stereochemistry of all products was assigned by NMR experiments.     

Regioselective biocatalytic hydrolysis of (E,Z)-2-methyl-2-butenenitrile for production of (E)-2-methyl-2-butenoic acid

Acidovorax facilis 72W nitrilase catalyzed the regioselective hydrolysis of (E,Z)-2-methyl-2-butenenitrile, producing only (E)-2-methyl-2-butenoic acid with no detectable conversion of (Z)-2-methyl-2-butenenitrile. (E)-2-Methyl-2-butenoic acid, produced in aqueous solution as the ammonium salt, was readily separated from (Z)-2-methyl-2-butenenitrile, and isolated in high yield and purity. The combination of nitrile hydratase and amidase activities of several Comamonas testosteroni strains were also highly regioselective for the production of (E)-2-methyl-2-butenoic acid from (E,Z)-2-methyl-2-butenenitrile.     

Synthesis of methyl (E)-2-[(3S,4S)-4-hydroxy-3-(pent-3-yloxy)-pyrrolidin-2-ylidene]propanoate and its unusual recyclization

Methyl (2E,4S,5S)-5-hydroxy-6-mesyloxy-2-methyl-4-(pent-3-yloxy)hex-2-enoate was synthesized from l-tartaric acid. Attempted substitution of the mesyloxy group by the reaction with NaN₃ directly led to methyl (E)-2-[(3S,4S)-4-hydroxy-3-(pent-3-yloxy)pyrrolidin-2-ylidene]propanoate. The latter on treatment with CF₃COOH and then NaOH gave methyl (2E)-2-methyl-4-[(S)-oxiran-2-yl]-4-(pent-3-yloxy)but-2-enoate.     

Polymerization of phenylacetylene by novel Rh (I)-, Ir (I)- and Ru (IV) 1,3-R2-3,4,5,6-tetrahydropyrimidin-2-ylidenes (R = mesityl, 2-propyl): Influence of structure on activity and polymer structure

The preparation of novel Rh (I) and Ir (I) complexes, i.e. [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[PF₆]⁻ (1), Rh(CF₃SO₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (2) and Ir(CF₃CO₂)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (3) (COD = 1,5-cyclooctadiene), is described. Compounds 1 and 3 were structurally characterized by X-ray diffraction. In 1, the N-heterocyclic carbene acts as a bidentate ligand with the carbene coordinating to the Rh(I) center and an arene group acting as a homoazallyl ligand. The catalytic activity of complexes 1–3 in the polymerization of phenylacetylene was studied and compared to that of RhCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (4), Rh(CF₃COO)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (5), [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[BF₄]⁻ (6), IrCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (7), IrCl(1,3-diisopropyl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (8), IrBr(1,3-di-2-propylimidazolin-2-ylidene)(COD) (9), RuCl₂(PCy₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH–C₆H₅) (10), RuCl₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (11), Ru(CO₂CF₃)₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (12). Compounds 1–6 were active in the polymerization of phenylacetylene. cis-Poly(phenylacetylene) (PPA) was obtained with the rhodium-based catalysts 1, 2, 4–6, trans-PPA was obtained with the Ir-based catalysts 3 and 8. In addition, compounds 1 and 6 were found to produce highly stereoregular PPA with a cis-content of 100% in the presence of water. Finally, the Ru-based metathesis initiator 12 allowed for the synthesis of trans-PPA, representing the first example of a ruthenium complex being active in the polymerization of a terminal alkyne.     

Five-membered 2,3-dioxo heterocycles: LXIX. Direct heterocyclization of [3,4-dihydroisoquinolin-1(2H)-ylidene]-acetamides with 5-arylfuran-2,3-diones. Crystalline and molecular structure of (3E,5Z)-3-[3,3-dimethyl-3,4-dihydroisoquinolin-1(2H)-ylidene]-5-(2-oxo-2-phenylethylidene)pyrrolidine-2,4-dione

5-Arylfuran-2,3-diones react with (Z)-2-[3,3-dimethyl-3,4-dihydroisoquinolin-1(2H)-ylidene]acetamides to give (3E,5Z)-5-(2-aryl-2-oxoethylidene)-3-[3,3-dimethyl-3,4-dihydroisoquinolin-1(2H)-ylidene]-pyrrolidine-2,4-diones. The crystalline and molecular structures of one of the products were determined by X-ray analysis.     

Simple procedure for preparation of quinoxalin-2(1H)-one 3-[Oxo(cyclo)alkyl(idene)] derivatives

A simple preparative procedure was developed for 3-(2-oxoalkylidene)-3,4-dihydroquinoxalin-2(1H)-ones, 4,5-dihydroxy-1-[3-oxo-3,4-dihydroquinoxalin-2(1H)-ylidene]-3,5-octadiene-2,7-dione, and 3-(2,3-dihydroxy-4-methyl-5-oxo-1,3-cyclopentadien-1-yl)quinoxalin-2(1H)-one by reaction of methyl ketones first with diethyl oxalate in the presence of sodium, and then with o-phenylenediamine.     

A stereoselective synthesis for the (5Z,9Z)-14-methyl-5,9-pentadecadienoic acid and its monounsaturated analog (Z)-14-methyl-9-pentadecenoic acid

A stereoselective synthesis for the (5Z,9Z)-14-methyl-5,9-pentadecadienoic acid and the monounsaturated analog (Z)-14-methyl-9-pentadecenoic acid was accomplished in six to seven steps where double alkyne coupling was the key step. This synthesis will facilitate the study of the topoisomerase I inhibitory profile of this important class of fatty acids.     

A facile synthesis of (Z)-5-(substituted)-2-(methylthio)thiazol-4(5H)-one using microwave irradiation and conventional method

A new effective approach to the synthesis of some new (Z)-5-(substituted)-2-thioxothiazolidin-4-one 3a–l and (Z)-5-(substituted)-2-(methylthio)thiazol-4(5H)-one 5a–l is reported under microwave irradiation as well as conventional conditions.     

Synthesis of 2-(4H-1,2,6-thiadiazin-4-ylidene)malononitriles

The base-free TiCl₄-mediated condensation of 3,5-disubstituted-4H-1,2,6-thiadiazin-4-ones 8 with malononitrile affords 20 difficult to access (3,5-disubstituted-4H-1,2,6-thiadiazin-4-ylidene)malononitriles 7. The reaction tolerates 3,5-diaryl, diphenoxy, dimethoxy and diphenylthio substituted thiadiazinones, but not diamino, monohydroxy or dihalo substituents. Nevertheless, asymmetrically substituted 3-halo-5-phenyl- and 3-chloro-5-methoxy-4H-1,2,6-thiadiazin-4-ones convert into the corresponding ylidenemalononitriles in good yield. Furthermore, the condensation works well with ethyl cyanoacetate and diethyl malonate, but not with Meldrum's acid, dimedone or nitromethane. Finally, 2-(3-chloro-5-phenyl-4H-1,2,6-thiadiazin-4-ylidene)malononitrile (7q) reacts with aniline to give 4,7-diphenyl-6-(phenylimino)-6,7-dihydropyrrolo[2,3-c][1,2,6]thiadiazine-5-carbonitrile (12) in moderate yield demonstrating the potential use of these ylidenes to prepare novel 6–5 fused 4H-1,2,6-thiadiazines.     

Synthesis and characterization of copper(II), cobalt(II), nickel(II), and iron(III) complexes with two diamine Schiff bases and catalytic reactivity of a chiral diamine cobalt(II) complex

New transition metal complexes of Co(II), Cu(II), Ni(II), and Fe(III) of the ligands 6,6′-(1E,1′E)-(4,5-dimethyl-1,2-phenylene)bis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(7-hydroxy-5-methoxy-2-methyl-4H-chromen-4-one) H₂L¹ and 6,6’-(1E,1′E)-cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(7-hydroxy-5-methoxy-2-methyl-4H-chromen-4-one) H₂L² have been prepared and characterized using physio-chemical and spectroscopic methods. The results obtained for the complexes indicated that the geometries of the metal centres are either square planar or octahedral. Cyclopropanation reactions of unactivated olefins by ethyldiazoacetate (EDA) in the presence of [L¹Cu]·H₂O, [L²Cu]·2H₂O and [L²*Co]·2H₂O as catalysts were examined. The results showed that only [L²*Co]·2H₂O can act as a catalyst for the cyclopropanation reaction of unactivated olefins with very high selectivity (up to 99% based on EDA).     

Unusual result of the reaction of 4-(1-methyl-1H-imidazol-2-yl)methylene-substituted 2-alkylthioimidazol-5(4H)-one with copper(ii) chloride

A reaction of potassium ({(4Z)-4-[(1-methyl-1H-imidazol-2-yl)methylene]-5-oxo-1-phenyl-4,5-dihydro-1H-imidazol-2-yl}thio)acetate with copper(II) chloride in methanol leads to bis(5-anilino-7-methoxycarbonyl-1-methyl-1H-imidazo[1,2-c]pyrimidin-4-ium) tetrachloro-cuprate(II), whose structure was confirmed by the X-ray diffraction studies.     

Peculiarities of the reaction of (SPY-5-34)-dichloro-(κ2(C,O)-2-formylbenzylidene)(1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene)ruthenium with potassium hydridotris(pyrazolyl)borate

The reaction of (SPY-5-34)-dichloro-(κ²(C,O)-2-formylbenzylidene)(H₂IMes)ruthenium (H₂IMes=1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) with potassium hydridotris(pyrazolyl)borate (KTp) in dichloromethane yielded an unusual ruthenium complex chloro(κ³(N,N,N)-chlorotris(pyrazolyl)borate)(κ²(C,C)-1-(2,4,6-trimethylphenyl)-3-(4,6-dimethylphenyl-2-methylidene)-4,5-dihydroimidazol-2-ylidene)ruthenium (2). In 2, a chlorotris(pyrazolyl)borate ligand, which had been created during this reaction, binds in κ³(N,N,N)-mode to the central ruthenium atom. Additionally, a double C–H activation of a methyl group of the H₂IMes resulted in the formation of a chelating N-heterocyclic biscarbene ligand and liberation of the former 2-formylbenzylidene as 2-methylbenzaldehyde. Formally, a double hydrogen transfer from a methyl group of the H₂IMes to the initial carbene carbon occurred. 2 was characterized by NMR spectroscopy, elemental analysis and single crystal X-ray structure determination. The reaction of KTp with (SPY-5-34)-dichloro(κ²(C,O)-2-ethoxycarbonylbenzylidene)(H₂IMes)ruthenium, on the other hand, gave the expected product chloro(κ³(N,N,N)-hydridotris(pyrazolyl)borate)(H₂IMes)(2-ethoxycarbonylbenzylidene)ruthenium (6). Compound 6 was characterized by NMR spectroscopy, elemental analysis and single crystal X-ray structure determination. Investigations of the relative activities of these complexes in model ring opening metathesis polymerizations showed a pronounced thermal latency. Polymerizations proceeded at temperatures above 100 °C in case of 6 and 130 °C in case of 2.