Synthesis of substituted 3-(3-chloro-1H-pyrazol-5-yl)quinoxalin-2(1H)ones

Synthetic strategies to gain access to all four isomers of 3-(3-chloro-1H-pyrazol-5-yl)quinoxalin-2(1H)ones with monosubstituted benzo core (i.e., compounds 8a–d) are described. Preparation of these heterocyclic compounds succeeded starting from only two different substituted 2-nitroanilines (i.e., 3-methoxy- and 4-methoxy-2-nitroaniline) in three or five steps, respectively.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Synthesis of 1H-indol-2-yl-(4-aryl)-quinolin-2(1H)-ones via Pd-catalyzed regioselective cross-coupling reaction and cyclization

An efficient and novel route for the synthesis of 1H-indol-2-yl-(4-aryl)-quinolin-2(1H)-one 1 via palladium-catalyzed site-selective cross-coupling reaction and cyclization process was described. Reaction of 3-bromo-4-trifloxy-quinolin-2(1H)-one 3 with arylboronic acid catalyzed by PdCl₂(PPh₃)₂ afforded 3-bromo-4-aryl-quinolin-2(1H)-one 4, which then reacted with 2-ethynylaniline 5 via Pd-catalyzed Sonogashira coupling and CuI-mediated cyclization leading to the desired 1H-indol-2-yl-(4-aryl)-quinolin-2(1H)-one 1 in good yields.     

The structural and theoretical study of 1H-3,5-di-phenyl-1,2,4-diazaphosphole in the solid state

The N-, P-containing five-membered heterocyclic compound 1H-3,5-di-phenyl-1,2,4-diazaphosphole (1) was prepared in good yield and has been structurally characterized. 1H-3,5-Di-phenyl-1,2,4-diazaphosphole (1), crystallizing in two unexpected cyclic dimers with N-H?N hydrogen bonds, presents in the solid state a dynamic proton disorder implying a dynamic equilibrium within both dimers. The conformations of the phenyl rings, the disorder of the NH protons, and the intermolecular hydrogen bond of several 1,2,4-diazaphospholes (1-5) in the solid state have been rationalized by DFT [B3LYP/6-311++G(d,p)] calculations.     

Tri-component reaction of 2-alkyl-4,5-dichloropyridazin-3(2H)-ones: synthesis of 5-cyano-5-(pyrimidin-2-yl)-2,7-dialkyl-5H-dipyridazino-[4,5-b:4,5-e]-4H-thiopyran-1,6-dione and 2-(4-cyanophenoxy) pyrimidine

Reaction of 2-alkyl-4,5-dichloropyridazin-3(2H)-ones with p-cyanophenol and 2-mercaptopyrimidine in the presence of base gave 2,4,5-trisubstituted-pyridazin-3(2H)-ones 4-9, 2-(4-cyanophenoxy)pyrimidine (10) and 5-cyano-5-(pyrimidin-2-yl)-2,7-dialkyl-5H-dipyridazino[4,5-b:4,5-e]-4H-thiopyran-1,6-diones 11 as a novel heterocycle.     

Design and synthesis of boron containing 2,4-disubstituted-phthalazin-1(2H)-one and 3,7-disubstituted-2H-benzo[b][1,4] oxazine derivatives as potential HGF-mimetic agents

We synthesized boron containing 2-(4-methoxybenzyl)-4-(4-(4,4,5,5-tetramethyl-1,3,2-dioaborolan-2-yl)phenyl) phthalazin-1(2H)-one 3 and 7-methyl-3-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)-2H-benzo[b][1,4] oxazine 8. The reaction of compound 2 with B₂pin₂ using potassium acetate as the base and Pd(PPh₃)₂Cl₂ as the catalyst, produced the corresponding boron-containing derivative 3 as a white solid in 65% yield. Alternatively, we have synthesized compound 8 as a yellow solid in 59% yield using the Miyaura borylation reaction. The potassium trifluoro(4-(-methyl-2H-benzo[b][1,4]oxazine-3-yl)phenylborate 9 was then obtained after treatment of 8 with aqueous solution of KF₂H in methanol as white solid product in 60% yield. The biological activities of the synthetic compounds are currently being evaluated.     

Quinoxalines. Part 12: Synthesis and structural study of 1-(thiazol-2-yl)-1H-pyrazolo[3,4-b]quinoxalines—the dehydrogenative cyclization with hydroxylamine hydrochloride

Starting with 2-acetylquinoxaline a novel class of heterocyclic compounds, the 1-(thiazol-2-yl)-1H-pyrazolo[3,4-b]quinoxalines 4, were prepared by following two different synthetic procedures: 2-acetylquinoxaline reacted with thiosemicarbazide to the thiosemicarbazones 1a which was (i) cyclized with α-halogeno ketones to the thiazoles 3. These compounds were dehydrogenated in acidic medium to the title compounds 4. (ii) The thiosemicarbazone 1a could be also dehydrogenated using NH₂OH·HCl to the thioamide 5a and these, finally, were cyclized with α-halogeno ketones to the title compounds 4. Only thiazole 3a was isolated, the other thiazoles 3 were dehydrogenated in a one-pot procedure. From the thioamide 5a also both the compounds 9, by reacting with dibromodiacetyl, and 10, by treatment with dimethyl acetylenedicarboxylate, were obtained. The analysis of both the ¹H and ¹³C NMR spectra was not straightforward but could be attained finally by employing the whole arsenal of 1D and 2D NMR spectroscopy.     

A novel method for thiiranation of alkenes with 1,1′-dithiobis(1H-1,2,4-triazole)

Eight alkenes reacted with 1,1′-dithiobis(1H-1,2,4-triazole) 4 at −15 °C to form the corresponding thiiranes in moderate to good yields. The thiiranations of anti- and syn-9,9′-bibenzonorbornenylidenes and cis- and trans-cyclooctenes with 4 proceeded with retention of configuration of the starting alkenes.     

The reaction of 2-(1-hydropolyfluoro-1-alkenyl)-4H-3,1-benzoxin-4-ones with dinucleophilic reagents: a convenient route to fluoroalkylated nitrogen-containing tricyclic compounds

The reactions of 2-(1-hydropolyfluoro-1-alkenyl)-4H-3,1-benzoxin-4-ones (2) with hydrazine hydrate and phenyl hydrazine were investigated. The reaction of 2 with hydrazine hydrate in ethanol under reflux condition readily gave 2-fluoroalkyl-4H-pyrazolo[5,1-b]quinazolin-9-ones (3) in high yields. The reaction of 2 with phenyl hydrazine, however, resulted in the formation of 2-(2-phenyl-5-fluoroalkyl-2H-pyrazol-3-yl) benzoic acids (7). Further treatment of 7 with PPA gave 1-phenyl-4,9-dihydro-3-fluoroalkyl-1H-pyrozolo[3,4-b]quinolin-4-ones (4) in 65-80% overall yields.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

Synthesis of a new series of ditopic proligands for metal salts: differing regiochemistry of electrophilic attack at 3{5}-amino-5{3}-(pyrid-2-yl)-1H-pyrazole

An improved synthesis of 3{5}-amino-5{3}-(pyrid-2-yl)-1H-pyrazole (I) is described, which affords the compound on a multi-gram scale. Reaction of I with acid chloride and isothiocyanate electrophiles in MeCN cleanly results in attack at its amino group, yielding N-(3-{pyrid-2-yl}-1H-pyrazol-5-yl)amide and N-(3-{pyrid-2-yl}-1H-pyrazol-5-yl)thiourea products. These are good candidates as proligands for the simultaneous complexation of metal cations and anions. However, treatment of I with isocyanates under the same conditions instead yields attack at the pyrazole ring, giving 3-(pyridin-2-yl)-5-aminopyrazole-1-carboxylic acid amides as the only isolable products. The differing regiochemistries of these reactions were confirmed by ¹H NMR and X-ray crystallography.     

Hypervalent triphenyl and diphenyl tin coordination compounds derived from 2-(1H-benzimidazol-2-yl)phenol

Reactions of 2-(1H-benzimidazol-2-yl)phenol (1) and SnPh₃Cl, SnPh₂Cl₂ and SnCl₄ were investigated. One tetracoordinated triphenyltin(IV) compound: triphenyltin-2-(1H-benzimidazol-2-yl)phenolate] (3) and its adducts: [O → Sn] dimethylsulfoxide triphenyltin-[2-(1H-benzimidazol-2-yl)phenolate] (4), [O → Sn] aqua triphenyltin-[2-(1H-benzimidazol-2-yl)phenolate] (5) [O → Sn] ethanol triphenyltin-[2-(1H-benzimidazol-2-yl)phenolate] (6), [N → Sn] pyridine triphenyltin-[2-(1H-benzimidazol-2-yl)phenolate] (7), where 1 acts as a monodentate ligand bound through the phenol oxygen, were obtained. In the pentacoordinated compounds 4-7, the tin atom has tbp geometry. The three phenyl groups are in equatorial positions, whereas the benzimidazole and the Lewis base are in apical positions. Two hexacoordinated tin compounds: diphenyltin-bis[2-(1H-benzimidazol-2-yl-κN)phenolate-κO] (8), dichlorotin-bis[2-(1H-benzimidazol-2-yl-κN)phenolate-κO] (9) bearing two bidentate ligands are reported. The coplanar ligands in 8 and 9 form six membered rings by oxygen and nitrogen coordination. The tin geometry is all-trans octahedral. In 8 the two phenyl groups, and in 9 the two chlorine atoms are perpendicular to the plane of the ligands. Compounds were identified in solution mainly by ¹H, ¹³C and ¹¹⁹Sn NMR and in the solid state by X-ray diffraction analysis.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

An efficient electrochemical method for a unique synthesis of new derivatives of 7H-thiazolo[3,2-b]-1,2,4-triazin-7-one

The electrochemical oxidation of catechols (1a-c) has been studied in the presence of 6-methyl-1,2,4-triazine-3-thion-5-one 3 in aqueous sodium acetate, using cyclic voltammetry and controlled-potential coulometry. A plausible mechanism for the oxidation of catechols and their reaction with 3 is presented. All the catechol derivatives (1a-c) were converted into 7H-thiazolo[3,2-b]-1,2,4-triazin-7-one derivatives (6a-c) through a Michael-type addition reaction of 3 to anodically generated o-quinones. The electrochemical syntheses of 6a-c were successfully performed in one pot in an undivided cell using an environmentally friendly method with high atomic economy.     

Reaction of (1,3-dioxo-2,3-dihydro-1H-inden-2-ylidene)propanedinitrile with N-arylisoindolines

In a multistep reaction, 3,3′-(2-aryl-2H-isoindol-1,3-ylene)-di-(1,4-naphthoquinone-2-carbonitriles) 13a-f have been formed in 25-61% yield from a series of N-arylisoindolines 8a-f with (1,3-dioxo-2,3-dihydro-1H-inden-2-ylidene)propanedinitrile (1) in aerated pyridine. The structure of one of these products (13f) has been unambiguously confirmed by a single crystal X-ray structure analysis. Under otherwise the same conditions, 2-(3-methoxyphenyl)-isoindoline (8g) and 1 gave 38% of [4-(2,3-dihydro-1H-isoindol-2-yl)-2-methoxyphenyl]-1,3-dioxoindan-2-ylidene)acetonitrile (15). Rationales for these conversions involving the known rearrangement of the radical anion of 1 into the radical anion of 1,4-naphthoquinone-2,3-dicarbonitrile (3) are presented.     

A short-cut from 1-acetyl adamantane to 2-(1-adamantyl)pyrroles

The oxime of 1-acetyl adamantane 2 is added to acetylene (KOH/DMSO, 70 °C, initial acetylene pressure 13 atm, 30 min) to afford the corresponding O-vinyl oxime 5 in 80% yield. The latter upon heating (DMSO, 120 °C, 1 h) gives 2-(1-adamantyl)pyrrole 3, 1-acetyl adamantane 1, and adamantane (6:3:1 mass ratio), the yield of the pyrrole 3 being 83% (based on 1-acetyl adamantane 1 consumed). Under harsher conditions (NaOH/DMSO, 130 °C, atmospheric pressure of acetylene, 4 h) oxime 2 reacts with acetylene to furnish pyrrole 3, 1-acetyl adamantane 1, 1-vinyl adamantane 9, and adamantane (6:7:3:1 mass ratio), with the isolated yield of pyrrole 3 reaching 34%. Under pressure (NaOH/DMSO, 120 °C, initial acetylene pressure 14 atm, 1 h) the same reaction leads to 2-(1-adamantyl)-1-vinylpyrrole 4 and ketone 1 in 48% (based on consumed ketone 1) and 24% yields, respectively. The pyrrole 4 is easily deprotected to the corresponding 1H-pyrrole 3 in 77% yield by treatment (aqueous MeCN) with Hg(OAc)₂ and NaBH₄.     

Efficient stepwise and one pot three-component synthesis of 2-amino-4-(2-oxo-2H-chromen-3-yl)thiophene-3-carbonitriles

Environmentally benign conditions have been developed for the synthesis of 2-amino-4-(2-oxo-2H-chromen-3-yl)thiophene-3-carbonitriles (3) starting from 3-acetyl-2H-chromen-2-one (1) through the intermediacy of 2-(1-(2-oxo-2H-chromen-3-yl)ethylidene)malononitrile (2) using the Knoevenagel condensation followed by the Gewald reaction. Alternatively, 3 could also be prepared in a one pot method by treating equimolar amounts of 1, malononitrile, and elemental sulfur. The merits of this preparation are mild reaction conditions, easy work-up procedure, and good yields.     

Effect of ortho-substituents on the stereochemistry of 2-(o-substituted phenyl)-1H-imidazoline-palladium complexes

Palladium complexes composed of [Pd(Ln)₂Cl₂] (n = 1, 2, 3, 4, 6), [L5a]₂[PdCl₄] and [Pd(L5b)₂], where L1 = 4,5-dihydro-2-phenyl-1H-imidazole (=2-phenyl-1H-imidazoline), L2 = 2-(o-fluorophenyl)-1H-imidazoline, L3 = 2-(o-methylphenyl)-1H-imidazoline, L4 = 2-(o-tert-butylphenyl)-1H-imidazoline, L5a = 2-(o-hydroxyphenyl)-1H-imidazolinium, L5b = 2-(1H-imidazolin-2-yl)phenolate, and L6 = 2-(o-methylphenyl)-1H-imidazole, were synthesized. Molecular structures of the isolated palladium complexes were characterized by single crystal X-ray diffraction analysis. The effect of ortho-substituents on the phenyl ring on trans-chlorine geometry was noted for complexes [Pd(L1)₂Cl₂] 1a and 1b, [Pd(L2)₂Cl₂] 2 and [Pd(L6)₂Cl₂] 6, whereas cis-chlorine geometry was observed for [Pd(L3)₂Cl₂] 3 and [Pd(L4)₂Cl₂] 4. PdCl₂ reacts with 2-(o-hydroxyphenyl)-1H-imidazoline in DMF to give [L5a]⁺ and [L5b]^- so that [L5a]₂[PdCl₄] 5a and [Pd(L5b)₂] 5b were obtained. In complex 5b, as an N,O-bidentate ligand, two ligands L5b coordinated with the central Pd(II) ion in the trans-form. The coordination of PdCl₂ with 2-(o-hydroxyphenyl)-1H-imidazolines in solution was investigated by NMR spectroscopy.     

Synthesis and properties of 4,9-methanoundecafulvenes and their transformation to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones: photo-induced autorecycling oxidizing reaction toward amines

The synthesis and properties of 4,9-methanoundecafulvene [5-(4,9-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-trione] derivatives 8a,b were studied. Their structural characteristics were investigated on the basis of the ¹H and ¹³C NMR and UV-vis spectra. The rotational barrier (ΔG^‡) around the exocyclic double bond of 8a was found to be 12.55 kcal mol⁻¹ by the variable temperature ¹H NMR measurement. The electrochemical properties of 8a,b were also studied by CV measurement. Furthermore, the transformation of 8a,b to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones 16a,b was accomplished by oxidative cyclization using DDQ and subsequent ring-opening and ring-closure. The structural details and chemical properties of 16a,b were clarified. Reaction of 16a with deuteride afforded C13-adduct 19 as the single product, and thus, the methano-bridge controls the nucleophilic attack to prefer endo-selectivity. The photo-induced oxidation reaction of 16a and a vinylogous compound, 3-methylcyclohepta[4,5]furo[2,3-d]pyrimidine-2,4(3H)-dione 2a, toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) with the recycling number of 6.1-64.0 (for 16a) and 2.7-17.2 (for 2a), respectively.