Effect of oxygen addition on the hydrogen production from ethanol steam reforming in a Pd–Ag membrane reactor

In this communication, a porous stainless steel (PSS) tube was electrolessly plated into Pd–Ag membrane reactor which was used for separating hydrogen produced in an ethanol steam reforming reaction with the addition of oxygen, which has not been reported before. Palladium and silver were deposited on porous stainless steel tube via the sequential electroless plating procedure with an overall film thickness of 20 μm and Pd/Ag weight ratio of 78/22. Ethanol–water mixture (n_water/n_ethanol = 1 or 3) and oxygen (n_oxygen/n_ethanol = 0.2 or 0.7) were fed concurrently into the membrane reactor packed with MDC-3. The reaction temperatures were set at 593–723 K and the pressures 3–10 atm. The effect of oxygen addition plays a vital role on the ethanol steam reforming reaction, especially for the Pd–Ag membrane reactor in which a higher flux of hydrogen is required. If oxygen in the feed is not sufficient, it would be possible that steam reforming reaction prevails. Inversely, high O₂ addition will shift the reaction scenario to be partial oxidation dominating, and selectivity of CO₂ increases with increasing oxygen feed. At high pressure, autothermal reaction of ethanol would be easily reached.     

Iodine/CuI-mediated alkyne–carbonyl metathesis reaction: synthesis of 1-aryl-1,2-dihydrochromeno[2,3-b]azepine-3,6-dione

Iodine/cuprous iodide-mediated intramolecular alkyne–carbonyl metathesis reaction has been developed using 2-(N-aryl-N-propargyl)aminochromone-3-carbaldehyde as the substrate. It led to the synthesis of hitherto unreported chromeno[2,3-b]azepine-3,6-dione. The special features of this methodology are mild reaction conditions, 100% atom economy and use of inexpensive reagents. This is the first example of I₂/CuI-mediated alkyne–carbonyl metathesis reaction.     

Efficient three-component reactions of α-thiocyanato ketones stereoselectively forming E-3-aroylidene-2-oxindole derivatives

A new three-component reaction of α-thiocyanato ketones under microwave irradiation for the stereoselective synthesis of 25 examples of E-3-aroylidene-2-oxindole derivatives has been described. The domino reaction simultaneously installs C–S and C–C bonds through continuous [3+2] cycloaddition/ring opening of in situ generated 1,3-oxathiolanes/S_N2-type reaction sequence.     

Unusual nitrogen based heterocycles via allenic intermediates from the reaction of propargyl alcohols with P(III) substrates

The apparently simple reaction of the P(III) precursors [(RNH)P(μ-N-t-Bu)₂PY] (Y=NH-t-Bu, Cl), (OCH₂CMe₂CH₂O)PCl, and Ph₂PCl with functionalized propargyl alcohols is examined. In most cases, the final products are not the expected allenes but several previously unpredicted structural motifs, such as substituted oxazabenzocycloheptenones, indolinones, and fused heterocycles as revealed by X-ray crystallography. Mechanistic aspects of these novel reactions, as well as possible utility and the structural chemistry of the products are also discussed. The P–C or P–N bond cleavage of many of these compounds led to phosphorus-free 2-substituted indoles, quinolinones, and tetrahydroacridine.     

Hexaphenylbenzene end-capped tri(p-phenylenevinylenes): synthesis and properties

Three new hexaphenylbenzene end-capped tri(p-phenylenevinylenes) were synthesized by the Horner–Wadsworth–Emmons reaction in good yields (86–76%). All compounds have bright fluorescent emissions in the blue to blue–green region in solution (λ_max = 445–492 nm in tetrahydrofuran) and also high emission efficiency (Φ_fl = 0.51–0.72 in tetrahydrofuran). They exhibit good electrochemical reversibility, high thermal stability, and have high HOMO value.     

Mild method for the synthesis of 1H-indazoles through oxime-phosphonium ion intermediate

The synthesis of 1H-indazoles from o-aminobenzoximes is achieved via N–N bond formation using triphenylphosphine, I₂, and imidazole. Selective formation of oxime-phosphonium ion intermediate in the presence of the amino group is the driving force for this reaction. The nucleophilicity of the arylamino group and electrophilicity toward the N–O bond of oxime also control the reaction. The reaction proceeds at a faster rate with good to excellent yield under this mild reaction condition and is amenable to scale-up.     

Zn(II), Cd(II) and Hg(II) complexes of 8-aminoquinoline.: Structure,spectra and photoluminescence property

The reaction of 8-aminoquinoline (8-aq) with M(NO₃)₂ and M(ClO₄)₂ (where M = Zn, Cd and Hg) has synthesized complexes of the composition [M(8-aq)₂(H₂O)₂](X)₂ (X = NO₃, ClO₄) whereas MCl₂ has isolated M(8-aq)Cl₂ type non-ionic compounds. The reaction of M(OAc)₂, 8-aq and NaN₃/NH₄CNS in a 1:1:2 mole ratio has separated polynuclear complexes of the composition [M(8-aq)(Y)₂]_n (Y = N₃, NCS). The complexes have been characterized by spectroscopic data and have been structurally confirmed by single crystal X-ray diffraction study in some representative cases. The X-ray structure of [Zn(8-aq)₂(H₂O)₂](NO₃)₂ shows C–H–π, and π–π interactions and forms a H-bonded sheet (with interactions between the oxygen of NO₃ and C(9)–H of 8-aq/coordinated H₂O). A novel one-dimensional cadmium(II) azido complex, [Cd(8-aq)(N₃)₂]n (9), in which the azido takes on an end-on (EO) bridging mode, has been synthesized and characterized. The presence of π–π interactions result in a supramolecular two-dimensional behaviour for the structure. The complexes are photoluminescent at room temperature.     

Free-standing anion-exchange PEO–SiO2 hybrid membranes

Free-standing anion-exchange polyethylene oxide (PEO)–SiO₂ hybrid membranes with higher flexibility and good mechanical strength (tensile strength (TS) as high as 20.55 MPa) as well as high temperature tolerance (thermal degradation temperature in air, T_d, in the range of 220–240 °C) were prepared through sol–gel reaction of different precursors: charged alkoxysilane-functionalized PEO-1000 (PEO-[Si(OCH₃)₃]₂(+)), N-triethoxysilylpropyl-N,N,N-trimethylammonium iodine (A-1100(+)), monophenyltriethoxysilane (EPh) and in some cases also tetraethoxysilane (TEOS). Properties of the hybrid membranes, such as the thermal stability, tensile properties, hydrophilicity, and electrical performances, can be controlled by changing the feed ratio of the different sol–gel precursors. The results showed that some of the membranes have relatively good conductivity (∼0.003 S/cm) and so may find potential applications in alkaline membrane fuel cells.     

A mild oxidation of deactivated naphthalenes and anthracenes to corresponding para-quinones by N-bromosuccinimide

A new method to synthesize 1,4-naphthoquinone and 9,10-anthraquinone from naphthalene and anthracene functionalized with either –CHO or –COOH groups, using N-bromosuccinimide (NBS) in aqueous N,N-dimethylformamide at 75–80 °C, has been developed. Further, –CN and –CONH₂ functionalized naphthalenes and anthracenes can also be transformed into respective para-quinones in a one pot reaction, after successive acid hydrolysis and subsequent reaction with NBS. We believe that the present finding may serve as a valuable alternative to the classical approaches for the synthesis of polycyclic quinones from polyaromatic carbaldehydes through Dakin oxidation followed by further oxidation of the resulting hydroquinone by heavy metal oxides.     

Unexpected cleavage of the Cpy–Cpy bond in the reaction of 2,2′-bipyridine N,N′-diimines with acetylenes

An unusual cleavage of the C_py–C_py bond in the reaction of 2,2′-bipyridine N,N′-diimine and its C-methyl substituted derivatives with acetylenes is described. The effect of the solvent on the yield of 7,7′-bipyrazolo[1,5-a]pyridine-2,2′,3,3′-tetracarboxylates and the products of cleavage of the C_py–C_py bond has been studied. The mechanism of the cleavage reaction is discussed on the basis of DFT calculations.     

Synthesis,crystal structure and spectroscopic characterization of new neutral and cationic (η-p-cymene)–ruthenium(II) complexes with phosphine–amide ligands

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with the phosphino-amides o-Ph₂P–C₆H₄CO–NH–R [R = ⁱPr (a), Ph (b), 4-MeC₆H₄ (c), 4-FC₆H₄ (d)] to give the mononuclear compounds 1a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)]Cl. The subsequent reaction of these complexes with KPF₆ produced the cationic species 2a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)][PF₆] in which phosphino-amides also act as rigid P,O-chelating ligands. The molecular structures of 2b–d were determined crystallographically. Amide deprotonation is achieved when complexes 2a–d were made react with 1 M aqueous solution of KOH, affording the corresponding neutral species 3a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–N–R)] in which a P,N-coordination mode is suggested.     

Mechanistic studies on the Pd–Cl cleavage of dichloro-[1-alkyl-2-(naphthylazo)imidazole]palladium(II) complexes by 8-quinolinol

8-Quinolinol (HQ) reacts with [Pd(α-/β-NaiR)Cl₂] [α-/β-NaiR = 1-alkyl-2-(naphthyl-α-/β-azo)imidazole] in acetonitrile (MeCN) solution to give [Pd(α-/β-NaiR)(Q)](ClO₄). The products are characterized by spectroscopic techniques (FT-IR, UV–Vis, NMR). The reaction kinetics show a first order dependence of rate on each of the concentration of the metal complex and HQ. Addition of LiCl to the reaction retarded the rate of reaction and has proved the cleavage of the Pd–Cl bond as the rate-determining step. Thermodynamic parameters (Δ^‡H^° and Δ^‡S^°) are determined from variable temperature kinetic studies. The magnitude of the second order rate constant, k₂, increases as in the order: Pd(NaiEt)Cl₂ < Pd(NaiMe)Cl₂ < Pd(NaiBz)Cl₂ as well as Pd(β-NaiR)Cl₂ < Pd(α-NaiR)Cl₂.     

A unique tridecanuclear Co(II) cluster with derivatised salicylaldoxime ligands: Structure,electrospray ionization mass spectrometry analysis and preliminary magnetic studies

A unique [Co₁₃(mosao)₈(Hmosao)₆]·(ClO₄)₄·3DMF·MeOH·3H₂O (1, H₂mosao = 3-methoxysalicylaldoxime) supercluster has been synthesized by a method of solvothermal reaction. The [Co₁₃(μ₂-O)₈(μ₃-O)₆(μ₂-O–N)₂(μ₃-O–N)₈]⁴⁺ core is highly conjugated butterfly-like disc, which can be considered as fourteen distorted defective cubes sharing the neighboring faces one another. The electrospray ionization mass spectrometry (ESI-MS) analysis of 1 strongly suggests that Co₁₃ cluster also exists in solution and maintains a conformation similar to that in the crystal structure, indicating that the significant stability of 1 in solution. Magnetic measurements of 1 reveal antiferromagnetic behaviors resulting from the cooperative magnetic coupling through multiplicate monoatomic oxygen and –N–O– exchange bridges and the odd number of spins result in relatively effective noncompensated moments at very low temperature.     

Mercury(II) complex of inverted N-methylated porphyrin: HgPh(2-NCH3NCTPP)

The reaction of PhHgOAc with 2-NCH₃NCTPPH (2) gave a mercury(II) complex of (phenylato)(2-N-methyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′,N″)-mercury(II), [HgPh(2-NCH₃NCTPP); 7]; the coordination sphere around Hg(1) in 7 was a four-coordinate derivative with a seesaw geometry and dipole–dipole (DD) interaction governed the longitudinal relaxation rate for Hg(1)–Ph–H_2,6 protons of 7 in CDCl₃ (0.01 M) at 599.95 MHz.     

Comparison of several sorbents for continuous in situ derivatization and preconcentration of low-molecular mass aldehydes prior to liquid chromatography–tandem mass spectrometric determination in water samples

A comparative study of six SPE conventional and non-conventional sorbent materials (silica RP-C₁₈, LiChrolut EN, Amberlite XAD-2, C₆₀ fullerene, multiwall carbon nanotubes and graphitized carbon black) was carried out for the in situ derivatization/preconcentration of eight aldehydes with 2,4-dinitrophenylhydrazine. Although two of the sorbents, LiChrolut EN and RP-C₁₈, turned out to be the most suitable for ultratrace analysis of the aldehydes, LiChrolut EN showed higher capacity for 2,4-dinitrophenylhydrazine trapping (higher efficiency for the in situ derivatization reaction) and superior performance in terms of sensitivity (likely a result of its increased sample breakthrough volume). The LiChrolut EN-based method combined with LC–MS/MS allowed the determination of aldehydes over the linear range of 0.02–15 μg l⁻¹, with limits of detection at 6–24 ng l⁻¹ and precision of 3.2–7.2%. The method was applied to determine low-molecular mass aldehydes in water samples. These results indicate that the method proposed is a straightforward and sensitive tool for the determination of these aldehydes in water samples providing better results than those LC–MS/MS reported alternatives in terms of the limit of detection, sample requirements for analysis and cost.     

Pd–Cl cleavage of dichloro-[1-alkyl-2-(naphthylazo)imidazole]palladium(II) complexes by picolinic acid: Kinetic and mechanistic studies

Picolinic acid (picH) reacts with [Pd(α-/β-NaiR)Cl₂] [α-/β-NaiR = 1-alkyl-2-(naphthyl-α-/β-azo)imidazole] in acetonitrile (MeCN) medium to give [Pd(α-/β-NaiR)(pic)](ClO₄). The products are characterized by spectroscopic techniques (FT-IR, UV–Vis, NMR). The reaction kinetics show first order dependence of rate on each of the concentration of Pd(II) complex and picH. Addition of LiCl to the reaction decreases the rate of reaction and has proved the cleavage of Pd–Cl bond at the rate-determining step. Thermodynamic parameters (Δ^‡H° and Δ^‡S°) are determined from variable temperature kinetic studies. The magnitude of the second order rate constant, k₂ increases as in the order: Pd(NaiEt)Cl₂ < Pd(NaiMe)Cl₂ <  Pd(NaiBz)Cl₂ as well as Pd(β-NaiR)Cl₂ <  Pd(α-NaiR)Cl₂.     

Unsymmetrically substituted triazacyclohexanes and their chromium complexes

The unsymmetrically N-substituted N,N′-Ar₂-N″-R-1,3,5-triazacyclohexanes 1–4 (Ar = ortho- or para-fluorophenyl, R = n- or iso-propyl) can be obtained in good yields from a one-step condensation reaction with excess amine. Solid state structures of 1–4 resemble closely those of their triaryl-substituted analogues. The condensation reaction to 4 was looked at by detailed NMR investigations and revealed that amine/aniline exchange is occurring in solutions containing free aniline even at ambient conditions setting up an equilibrium between all possible symmetrical and unsymmetrical triazacylcohexanes. Selective crystallisation of 4 from the solution drives the reaction to high yields of 4. Complexes 1–4 react readily with CrCl₃ or CrCl₃(THF)₃ to form the corresponding CrCl₃ complexes. The complexes are insoluble in non-polar solvents and decompose under decomplexation in coordinating solvents.     

Synthesis and evaluation of some variants of the Nefkens’ reagent

A series of N-substituted phthalimides have been prepared in an effort to explore synthetic variants of the Nefkens’ reagent. Three N-acylphthalimides [R = –CH₃, –CH₂CH₃, and –C(CH₃)₃] were prepared and employed for the protection of a series of representative amines. In addition, an N-methanesulfonylphthalimide and N-(diethylphosphoryl)phthalimide were also prepared. It was determined that among the phthalimides that were prepared N-propanoylphthalimide was the most effective reagent for the protection reaction.