Solid‐Phase Synthesis of Peptide Libraries Combining α‐Amino Acids with Inorganic and Organic Chromophores

The synthesis of two series of peptidic chains composed of bis(terpyridine)ruthenium(II) acceptor units and organic chromophores (coumarin, naphthalene, anthracene, fluorene) by stepwise solid‐phase peptide synthesis (SPPS) techniques is described. The first series of dyads comprises directly amide linked chromophores, while the second one possesses a glycine spacer between the two chromophores. All dyads were studied by UV/Vis and NMR spectroscopy, steady‐state luminescence, luminescence decay and electrochemistry, as well as by DFT calculations. The results of these studies indicate weak electronic coupling of the chromophores in the ground state. Absorpion spectra of all dyads are dominated by metal‐to‐ligand charge‐transfer (MLCT) bands around 500 nm. The bichromophoric systems, especially with coumarin as organic chromophore, display additional strong absorptions in the visible spectral region. All complexes are luminescent at room temperature (³MLCT). Efficient quenching of the fluorescence of the organic chromophore by the attached ruthenium complex is observed in all dyads. Excitation spectra indicate energy transfer from the organic dye to the ruthenium chromophore.     

Broadband Visible‐Light‐Harvesting trans‐Bis(alkylphosphine) Platinum(II)‐Alkynyl Complexes with Singlet Energy Transfer between BODIPY and Naphthalene Diimide Ligands

A heteroleptic bis(tributylphosphine) platinum(II)‐alkynyl complex ( Pt‐1 ) showing broadband visible‐light absorption was prepared. Two different visible‐light‐absorbing ligands, that is, ethynylated boron‐dipyrromethene (BODIPY) and a functionalized naphthalene diimide (NDI) were used in the molecule. Two reference complexes, Pt‐2 and Pt‐3 , which contain only the NDI or BODIPY ligand, respectively, were also prepared. The coordinated BODIPY ligand shows absorption at 503 nm and fluorescence at 516 nm, whereas the coordinated NDI ligand absorbs at 594 nm; the spectral overlap between the two ligands ensures intramolecular resonance energy transfer in Pt‐1 , with BODIPY as the singlet energy donor and NDI as the energy acceptor. The complex shows strong absorption in the region 450 nm–640 nm, with molar absorption coefficient up to 88 000 M ^?1 cm^?1. Long‐lived triplet excited states lifetimes were observed for Pt‐1 – Pt‐3 (36.9 μs, 28.3 μs, and 818.6 μs, respectively). Singlet and triplet energy transfer processes were studied by the fluorescence/phosphorescence excitation spectra, steady‐state and time‐resolved UV/Vis absorption and luminescence spectra, as well as nanosecond time‐resolved transient difference absorption spectra. A triplet‐state equilibrium was observed for Pt‐1 . The complexes were used as triplet photosensitizers for triplet–triplet annihilation upconversion, with upconversion quantum yields up to 18.4 % being observed for Pt‐1 .     

The switchable phosphorescence and delayed fluorescence of a new rhodamine-like dye through allenylidene formation in a cyclometallated platinum(ii) system

A new rhodamine-like alkyne-substituted ligand (Rhodyne) was designed to coordinate a cyclometallated platinum(ii) system. The chemo-induced “ON–OFF” switching capabilities on the spirolactone ring of the Rhodyne ligand with an end-capping platinum(ii) metal centre can modulate the interesting acetylide–allenylidene resonance. The long-lived ³IL excited state of Rhodyne in its ON state as an optically active opened form was revealed via steady-state and time-resolved spectroscopy studies. Exceptional near-infrared (NIR) phosphorescence and delayed fluorescence based on a rhodamine-like structure were observed at room temperature for the first time. The position of the alkyne communication bridge attached to the platinum(ii) unit was found to vary the lead(ii)-ion binding mode and also the possible resonance structure for metal-mediated allenylidene formation. The formation of a proposed allenylidene resonance structure was suggested to rationalize these phenomena.

A new rhodamine-like ligand (Rhodyne) was designed to coordinate a cyclometallated platinum(ii) system. Allenylidene formation could trigger NIR phosphorescence at 740 nm originating from Rhodyne ³IL, as well as delayed fluorescence at 620 nm.     

Optical properties of highly planar diketopyrrolopyrrole derivatives fixed by coordinate bonds

Diketopyrrolopyrrole (DPP) derivatives bearing 2-pyridyl groups were synthesized, which could serve as anionic N,N′-chelate ligands consisting of two nitrogen atoms of the lactam moieties and the pyridyl groups. Coordination of the DPP ligand to boron and platinum yielded the corresponding DPP complexes. Their crystal structures exhibited coplanar structures between the DPP core and the 2-pyridyl groups, which indicated extended π-conjugation. The maximum absorption wavelength of the DPP complexes was longer than that of the corresponding DPP ligands. The choice of the introduced element affects the optical properties of the DPP complexes; the platinum complex has a longer absorption wavelength than the boron complex. The theoretical calculation revealed that these absorptions can be attributed to the π–π* transition. The introduction of the coordinating elements predominantly lowers the band gap. In addition, the substituent on the 2-pyridyl group can also modulate the energy levels.     

A Redox‐Active Dinuclear Platinum Complex Exhibiting Multicolored Electrochromism and Luminescence

A redox series of cyclometalated platinum complexes based on a dinuclear motif linked by acetamidato (aam) bridging ligands, [Pt₂(μ‐aam)₂(ppy)₂] (ppy^?=2‐phenylpyridinate ion), has been synthesized. The complexes in this series are easily oxidized and reduced by both electrochemical and chemical methods, and this is accompanied by multistep changes in their optical properties, that is, multiple color changes and luminescence. Isolation of the complexes and the structural determination of three oxidation states, +2, +2.33, and +3, have been achieved. The mixed‐valent complex, with an average oxidation state of +2.33, forms a trimer based on the dinuclear motif. The mixed‐valent complex has a characteristic color owing to intervalence transitions in the platinum chain. In contrast, the divalent complex exhibits strong red phosphorescence originating from a triplet metal‐metal‐to‐ligand charge transfer (³MMLCT) state. This study demonstrates the unique chromic behavior of a redox‐active and luminescent platinum complex.     

Water‐Soluble Luminescent Cyclometalated Gold(III) Complexes with cis‐Chelating Bis(N‐Heterocyclic Carbene) Ligands: Synthesis and Photophysical Properties

A new class of cyclometalated Au^III complexes containing various bidentate C‐deprotonated C^N and cis‐chelating bis(N‐heterocyclic carbene) (bis‐NHC) ligands has been synthesized and characterized. These are the first examples of Au^III complexes supported by cis‐chelating bis‐NHC ligands. [Au(C^N)(bis‐NHC)] complexes display emission in solutions under degassed condition at room temperature with emission maxima (λ_max) at 498–633 nm and emission quantum yields of up to 10.1 %. The emissions are assigned to triplet intraligand (IL) π→π* transitions of C^N ligands. The Au^III complex containing a C^N (C‐deprotonated naphthalene‐substituted quinoline) ligand with extended π‐conjugation exhibits prompt fluorescence and phosphorescence of comparable intensity with λ_max at 454 and 611 nm respectively. With sulfonate‐functionalized bis‐NHC ligand, four water‐soluble luminescent Au^III complexes, including those displaying both fluorescence and phosphorescence, were prepared. They show similar photophysical properties in water when compared with their counterparts in acetonitrile. The long phosphorescence lifetime of the water‐soluble AuIII complex with C‐deprotonated naphthalene‐substituted quinoline ligand renders it to function as ratiometric sensor for oxygen. Inhibitory activity of one of these water‐soluble Au^III complexes towards deubiquitinase (DUB) UCHL3 has been investigated; this complex also displayed a significant inhibitory activity with IC₅₀ value of 0.15 μM .     

Four‐Coordinate Boron Emitters with Tridentate Chelating Ligand for Efficient and Stable Thermally Activated Delayed Fluorescence Organic Light‐Emitting Devices

A new class of four‐coordinate donor‐acceptor fluoroboron‐containing thermally activated delayed fluorescence (TADF) compounds bearing a tridentate 2,2′‐(pyridine‐2,6‐diyl)diphenolate (dppy) ligand has been successfully designed and synthesized. Upon varying the donor moieties from carbazole to 10H‐spiro[acridine‐9,9′‐fluorene] to 9,9‐dimethyl‐9,10‐dihydroacridine, these boron derivatives exhibit a wide range of emission colors spanning from blue to yellow with a large spectral shift of 2746 cm^?1, with high PLQYs of up to 96 % in the doped thin film. Notably, vacuum‐deposited organic light‐emitting devices (OLEDs) made with these boron compounds demonstrate high performances with the best current efficiencies of 55.7 cd A^?1, power efficiencies of 58.4 lm W^?1 and external quantum efficiencies of 18.0 %. More importantly, long operational stabilities of the green‐emitting OLEDs based on 2 with half‐lifetimes of up to 12 733 hours at an initial luminance of 100 cd m^?2 have been realized. This work represents for the first time the design and synthesis of tridentate dppy‐chelating four‐coordinate boron TADF compounds for long operational stabilities, suggesting great promises for the development of stable boron‐containing TADF emitters.     

Label-free sensing of pH and silver nanoparticles using an “OR” logic gate

Many natural phenomena are associated with the presence of two or more separate variables. We report here an “OR” DNA logic gate based on a luminescent platinum(II) switch-on probe for silver nanoparticles and pH, both of which may be considered putative indicators of pollution. The modulation of metal complex/double-stranded DNA complex phosphorescence by Ag⁺ and H⁺ was used to construct a simple, rapid and label-free method for the label-free detection of pH and nanomolar Ag⁺ ions and nanoparticles in aqueous solutions with high selectivity.     

Polymerization of coordinated monomers. XXI. Ab initio molecular orbital study on the binary molecular complex composed of methyl methacrylate and boron trifluoride

The stereo- and electronic structures of the binary molecular complex composed of methyl methacrylate and boron trifluoride are obtained by using an ab initio molecular orbital method with an STO-3G basis set. The total energy change on the binary molecular complex formation is ?1.3 X 10^?2 Hartree (?8.2 kcal/mol). The electron transfer from methyl methacrylate to boron trifluoride and the change in the energy level of the lowest unoccupied molecular orbital of methyl methacrylate on the complex formation with boron trifluoride are much smaller than those on the complex formation with boron trichloride. A twisted form in which the dihedral angle between the vinyl plane and the ester plane is 16.9° is the most stable structure of the binary molecular complex composed of methyl methacrylate and boron trifluoride. A strong bonding overlap population between a β-hydrogen of methyl methacrylate and a fluorine of boron trifluoride is found in this conformation. © 1992 John Wiley & Sons, Inc.     

Monobenzofused 1,4‐Azaborines: Synthesis,Characterization, and Discovery of a Unique Coordination Mode

We report the first general synthesis of boron‐substituted monobenzofused 1,4‐azaborines using ring‐closing metathesis of an enamine‐containing diene as a key synthetic strategy. As part of our investigations, we discovered that the B‐C3 moiety in a 1,4‐azaborine can serve uniquely as a η²‐L‐type ligand. This functionality is exemplified by two κ²‐N‐η²‐BC Pt complexes of a boron‐pyridyl‐substituted monobenzofused‐1,4‐azaborine. Single‐crystal X‐ray diffraction analysis of the Pt complexes shows a strong structural contribution from the iminium resonance form of the monobenzofused‐1,4‐azaborine ligand. We also demonstrate that a palladium(0) complex supported by a 1,4‐azaborine‐based phosphine ligand can catalyze hydroboration of 1‐buten‐3‐yne with unique selectivity. In view of the importance of arene–metal π‐interactions in catalytic applications, this work should open new opportunities for ligand design involving the 1,4‐azaborine motif as an arene substitute.     

Synthesis of novel tetrachromophoric cascade-type Bodipy dyes

Two series of multi-cascade scaffolds bearing a boradiazaindacene (yellow dye) or a boradibenzopyrromethene (green dye) as the final energy acceptor have been synthesized. Each scaffold contains one, two or three alkynylaryl energy donors (such as pyrene D₁, perylene D₂, and fluorene D₃) linked to the boron center. Palladium-catalyzed cross-coupling of dihalogenated Bodipy starting material enabled the step-by-step construction of the different modules. In all cases, selective irradiation in each absorbing subunit resulted in efficient energy transfer over 25 Å to the Bodipy units.     

Bis(metallo) Capsules Based on Two Ionic Diphosphines

Self‐assembly and characterization of heterodimeric diphosphine capsules formed by multiple ionic interactions are described. The first type of capsules is composed of one novel tetrasulfonato‐xantphos ligand and one complementary tetraammonium calix[4]arene. Encapsulation of a transition metal is achieved by self‐assembly of a rhodium complex containing the tetraanionic diphosphine ligand and a tetracationic calix[4]arene. The second type of capsules is composed of two oppositely charged diphosphine ligands: one tetrasulfonato‐xantphos and one tetraammonium‐diphosphine (of the xantphos‐, DPEphos‐, and 1,2‐bis(diphenylphosphino)ethane (dppe)‐type). Bis(metallo) capsules, that is, simultaneous encapsulation of two different transition metals, are created by self‐assembly of a palladium or platinum complex containing a tetracationic ligand and a rhodium complex containing a tetraanionic ligand. Diphosphine ligands with different flexibilities and shapes assemble into metallocapsules with a proper capsular structure, as is indicated by ¹H NMR and 1D‐NOESY spectroscopy, ESIMS, and modeling studies.     

Synthesis and characterization of a new fluorene ligand and its complexes with cobalt(II), copper(II), and ruthenium(II)

A new fluorene ligand, benzo[15-crown-5]-5H-pyrido[3′,2′:4,5]cylopenta[1,2-b]pyridin-5-ylidenehydrazone (bph), has been synthesized from the reaction of 4,5-diazafluoren-9-one with 4′-formylbenzo-15-crown-5. The Co(II), Cu(II), and Ru(II) complexes of the ligand were prepared and characterized. The metal-to-ligand ratio of the Co(II) and Cu(II) complexes was found to be 2:1 and that of the Ru(II) complex was found to be 1:1. The ligand and complexes have been characterized by FTIR, UV–visible, ¹H NMR and fluorescence spectra, as well as elemental analyses and mass spectra.     

Time-resolved analysis of photoluminescence at a single wavelength for ratiometric and multiplex biosensing and bioimaging

Simultaneous analysis of luminescence signals of multiple probes can improve the accuracy and efficiency of biosensing and bioimaging. Analysis of multiple signals at different wavelengths usually suffers from spectral overlap, possible energy transfer, and difference in detection efficiency. Herein, we reported a polymeric luminescent probe, which was composed of a phenothiazine-based fluorescent compound and a phosphorescent iridium(iii) complex. Both luminophores emitted at around 600 nm but their luminescence lifetimes are 160 times different, allowing time-resolved independent analysis. As the fluorescence was enhanced in response to oxidation by hypochlorite and the phosphorescence was sensitive toward oxygen quenching, a four-dimensional relationship between luminescence intensity, fluorescence/phosphorescence ratio, hypochlorite concentration, and oxygen content was established. In cellular imaging, time-resolved photoluminescence imaging microscopy clearly showed the independent fluorescence response toward hypochlorite and phosphorescence response toward oxygen in separated time intervals. This work opens up a new idea for the development of multiplex biosensing and bioimaging.

A single-wavelength dual-emissive polymeric probe shows fluorescence enhancement toward ClO⁻ and phosphorescence quenching toward O₂, allowing simultaneously imaging cellular ClO⁻ and O₂via time-resolved photoluminescence imaging microscopy.     

Thiazole Boron Difluoride Dyes with Large Stokes Shift,Solid State Emission and Room-Temperature Phosphorescence

The small Stokes shift and weak emission in the solid state are two main shortcomings associated with the boron-dipyrromethene (BODIPY) family of dyes. This study presents the design, synthesis and luminescent properties of boron difluoro complexes of 2-aryl-5-alkylamino-4-alkylaminocarbonylthiazoles. These dyes display Stokes shifts (Δλ, 77–101 nm) with quantum yields (ϕ_FL) up to 64.9 and 34.7 % in toluene solution and in solid state, respectively. Some of these compounds exhibit dual fluorescence and room-temperature phosphorescence (RTP) emission properties with modulable phosphorescence quantum yields (ϕ_PL) and lifetime (τ_p up to 251 μs). The presence of intramolecular H-bonds and negligible π-π stacking revealed by X-ray crystal structure might account for the observed large Stokes shift and significant solid-state emission of these fluorophores, while the enhanced spin-orbit coupling (SOC) of iodine and the self-assembly driven by halogen bonding, π-π and C−H^…π interactions could be responsible for the observed RTP of iodine containing phosphors.     

Rhodium(III) and cadmium(II) complexes based on the polypyridyl ligand 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz)

Tppz (2,3,5,6-tetrakis(2-pyridyl)pyrazine) complexes [Rh(tppz)(bpy)Cl][PF₆]₂.acetylacetone (bpy = 2,2′-bipyridine) and [{CdCl₂}₂(μ-tppz)].ethylene glycol have been synthesized and characterized by elemental analyses, IR, ¹H NMR, cyclic voltammetry, photoluminescence and electronic spectral studies. Solid state structures of both complexes have been determined by single-crystal X-ray crystallography. The structural determination shows that the dinuclear Cd(II) complex, [{CdCl₂}₂(μ-tppz)], is a 1D coordination polymer. An ORTEP drawing of [Rh(tppz)(bpy)Cl][PF₆]₂.acetylacetone shows that the coordination geometry around the Rh(III) center is a distorted octahedron. [{CdCl₂}₂(μ-tppz)] displays intraligand ¹(π–π^*) fluorescence and can potentially serve as a photoactive material. For the mononuclear Rh(III) complex, only a two-electron reduction process occurs at the metal with the elimination of Cl⁻ ligand. The emission of this complex is assigned as πd^* phosphorescence.     

Synthesis and Photophysical Properties of T-Shaped Coinage-Metal Complexes

The photophysical properties of a series of T-shaped coinage d¹⁰ metal complexes, supported by a bis(mesoionic carbene)carbazolide (CNC) pincer ligand, are explored. The series includes a rare new example of a tridentate T-shaped Ag^I complex. Post-complexation modification of the Au^I complex provides access to a linear cationic Au^I complex following ligand alkylation, or the first example of a cationic square planar Au^III−F complex from electrophilic attack on the metal centre. Emissions ranging from blue (Cu^I) to orange (Ag^I) are obtained, with variable contributions of thermally-dependent fluorescence and phosphorescence to the observed photoluminescence. Green emissions are observed for all three gold complexes (neutral T-shaped Au^I, cationic linear Au^I and square planar cationic Au^III). The higher quantum yield and longer decay lifetime of the linear gold(I) complex are indicative of increased phosphorescence contribution.     

Thermo-XRD-analysis and peptization study of the adsorption of alizarinate by Co-, Ni-, and Cu-montmorillonite

The adsorption of the monovalent anionic dye alizarinate onto Co-, Ni- and Cu-montmorillonite was carried out by adding the dye into aqueous clay suspensions. During the loading of the clay suspension by alizarinate, only some of the added organic anion is adsorbed by the clay forming d-coordination chelate complexes on the clay surface. Maximum adsorption of Co-, Ni- and Cu-clay were 13, 13 and 25 mmol dye per 100 g clay. Since the capacity of the clay for these transition metal cations is 38 mmol per 100 g clay, these saturations indicate that only part of the transition metal cations form positively charged d-coordination chelate complexes with metal:ligand ratio of 1. The complex cations can be located inside the interlayer spaces or on the broken bonds surfaces. Thermo-XRD-analysis and peptization studies of the solids and the clay water systems respectively were used here to identify the sorption sites. The Co and Ni complexes were obtained on the broken bonds surfaces whereas the Cu complexes were obtained in the interlayer space. Co²⁺, Ni²⁺ and Cu²⁺ were extracted from the clay into suspensions containing excess alizarinate.     

Cyclometalated iridium-coumarin ratiometric oxygen sensors: improved signal resolution and tunable dynamic ranges

In this work we introduce a new series of ratiometric oxygen sensors based on phosphorescent cyclometalated iridium centers partnered with organic coumarin fluorophores. Three different cyclometalating ligands and two different pyridyl-containing coumarin types were used to prepare six target complexes with tunable excited-state energies. Three of the complexes display dual emission, with fluorescence arising from the coumarin ligand, and phosphorescence from either the cyclometalated iridium center or the coumarin. These dual-emitting complexes function as ratiometric oxygen sensors, with the phosphorescence quenched under O₂ while fluorescence is unaffected. The use of blue-fluorescent coumarins results in good signal resolution between fluorescence and phosphorescence. Moreover, the sensitivity and dynamic range, measured with Stern–Volmer analysis, can be tuned two orders of magnitude by virtue of our ability to synthetically control the triplet excited-state ordering. The complex with cyclometalated iridium ³MLCT phosphorescence operates under hyperoxic conditions, whereas the two complexes with coumarin-centered phosphorescence are sensitive to very low levels of O₂ and function as hypoxic sensors.

Cyclometalated iridium(iii) coumarin complexes with improved signal resolution for ratiometric oxygen sensing are described. Dynamic ranges are tunable over >2 orders of magnitude.     

Molecular design of efficient white‐light‐emitting fluorene‐based copolymers by mixing singlet and triplet emission

A new strategy to realize efficient white‐light emission from a binary fluorene‐based copolymer (PF‐Phq) with the fluorene segment as a blue emitter and the iridium complex, 9‐iridium(III)bis(2‐(2‐phenyl‐quinoline‐N,C³′)(11,13‐tetradecanedionate))‐3,6‐carbazole (Phq), as a red emitter has been proposed and demonstrated. The photo‐ and electroluminescence properties of the PF‐Phq copolymers were investigated. White‐light emission with two bands of blue and red was achieved from the binary copolymers. The efficiency increased with increasing concentration of iridium complex, which resulted from its efficient phosphorescence emission and the weak phosphorescent quenching due to its lower triplet energy level than that of polyfluorene. In comparison with the binary copolymer, the efficiency and color purity of the ternary copolymers (PF‐Phq‐BT) were improved by introducing fluorescent green benzothiadiazole (BT) unit into polyfluorene backbone. This was ascribed to the exciton confinement of the benzothiadiazole unit, which allowed efficient singlet energy transfer from fluorene segment to BT unit and avoided the triplet quenching resulted from the higher triplet energy levels of phosphorescent green emitters than that of polyfluorene. The phosphorescence quenching is a key factor in the design of white light‐emitting polyfluorene with triplet emitter. It is shown that using singlet green and triplet red emitters is an efficient approach to reduce and even avoid the phosphorescence quenching in the fluorene‐based copolymers. The strategy to incorporate singlet green emitter to polyfluorene backbone and to attach triplet red species to the side chain is promising for white polymer light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 453–463, 2008