测定利血平的流动注射化学发光新体系

研究了利血平在酸性条件下与高碘酸钾和过氧化氢产生化学发光的行为 ,建立了高碘酸钾 -利血平 - H2 O2 - H2 SO4 流动注射化学发光新体系。利血平的浓度在 1 .0× 1 0 - 6～ 1 .0× 1 0 - 4g/m L范围内与化学发光强度呈良好的线性关系 ,检出限为 2 .7× 1 0 - 7g/m L。对 2× 1 0 - 5g/m L利血平进行 1 1次平行测定 ,得该法的相对标准偏差为 2 .63%。方法用于利血平片剂含量的测定 ,结果与药典法测得值一致     

在线电生Mn(Ⅲ)流动注射化学发光法测定氨基比林

将恒电流电解法与流动注射技术相结合 ,在线电解定量产生不稳定化学发光试剂 Mn( ) ,基于 Mn( )能直接氧化氨基比林产生化学发光 ,建立了流动注射电化学发光测定氨基比林的新方法。在优化的实验条件下 ,测定氨基比林的线性范围为 5.0× 1 0 -7～ 1 .0× 1 0 -4 g/m L ,相关系数为 0 .9996,方法的检出限为 2 .0× 1 0 -7g/m L,相对标准偏差 r=2 .1 % ( 1 .0× 1 0 -5g/m L,n=1 1 )。该方法已应用于针剂、片剂中氨基比林的测定。     

高锰酸钾-甲醛-碘化学发光新体系的研究

在甲醛存在下 ,高锰酸钾在酸性溶液中可以氧化碘离子 ,产生很强的化学发光。根据这一发现 ,采用流动注射技术 ,建立了利用高锰酸钾 -甲醛 -碘化学发光体系测定碘的化学发光分析法。方法的检出限为 1 .8× 1 0 -8g/m L,相对标准偏差为 1 .3% (1 .0× 1 0 -6g/m L ,n=1 1 ) ,线性范围为 1 .0× 1 0 -7～ 8.0× 1 0 -6g/m L。方法已用于食品中碘含量的测定。     

流动注射-化学发光法测定片剂中氨基比林

采用流动注射技术 ,研究了氨基比林 -高锰酸钾 -连二亚硫酸钠体系的化学发光行为。对影响化学发光强度的诸因素进行了实验探讨 ,建立了化学发光法测定片剂中氨基比林的新方法。方法的检出限为 6× 1 0 -8g/m L,线性范围为2 .0× 1 0 -7～ 8.0× 1 0 -5g/m L。对浓度为 4.0× 1 0 -6g/m L的氨基比林的相对标准偏差为 1 .8%     

流动注射化学发光法测定盐酸吗啉胍

二氯荧光素作为能量转移剂,N 溴代丁二酰亚胺氧化盐酸吗啉胍产生化学发光,十六烷基三甲基氯化铵对该体系具有强烈的增敏作用,据此建立了测定盐酸吗啉胍的流动注射化学发光分析法。研究了影响化学发光的各种因素,对机理进行了探讨。方法对盐酸吗啉胍响应的线性范围为 1. 0×10-5 ~0. 1g/L,检出限(3σ)为 3. 0×10-6 g/L,RSD为 2. 5% (5. 0×10-4 g/L,n=11)。本法用于盐酸吗啉胍片及杀菌剂中盐酸吗啉胍的定量分析,结果满意。     

反相流动注射化学发光法测定单宁

在碱性介质中 ,单宁对高碘酸钾氧化鲁米诺的化学发光反应有较强的增敏作用 ,据此建立了反相流动注射化学发光测定单宁的新方法 ,并研究了最佳反应条件。该方法快速、准确、线性范围宽 ,测定单宁的检出限为 1 .1 2× 1 0 - 9g/ m L,方法的线性范围为 2 .0× 1 0 - 8～ 6 .0× 1 0 - 6 g/ m L,对于 4.0× 1 0 - 6 g/ m L单宁 1 0次测定的相对标准偏差为 0 .79%。应用于中药五倍子、诃子中单宁的测定 ,结果满意     

高锰酸钾-甲醛-尿酸化学发光体系的研究

在甲醛存在下,高锰酸钾与尿酸能够发生化学发光反应,产生很强的化学发光。据此采用流动注射技术,建立了一种利用高锰酸钾甲醛尿酸化学发光体系测定尿酸的化学发光分析法。方法的检出限为6×10-6 g/L;相对标准偏差为1. 8% (4. 0×10-4 g/L尿酸,n=11 );线性范围为2. 0×10-5 ~5. 0×10-3g/L。本法用于人体尿液中尿酸的测定,结果令人满意。并探讨了反应机理。     

蝶呤类化合物的荧光性能研究

研究了蝶呤类化合物的天然荧光特性。着重考察了新蝶呤、生物蝶呤、黄蝶呤和蝶呤在 p H7.7磷酸盐缓冲溶液条件下的荧光光谱及各种因素对其荧光强度的影响。在最佳实验条件下 ,四种蝶呤类化合物的线性范围为 :蝶呤 0 .6～ 2 .8μg/m L,新蝶呤 0～ 2 .6μg/m L,生物蝶呤 0～ 2 .4μg/m L,黄蝶呤 0～ 6.0 μg/m L,检出限依次为 :4.2 9× 1 0 - 7g/m L,6.71× 1 0 - 8g/m L,5.79× 1 0 - 9g/m L和 1 .75× 1 0 - 8g/m L     

流动注射化学发光法测定DL-酪氨酸

在甲醛存在下 ,高锰酸钾与DL 酪氨酸能够发生化学发光反应 ,产生很强的化学发光。据此采用流动注射技术 ,建立了一种测定DL 酪氨酸的化学发光分析法。方法的检出限为 2 .9× 1 0 - 8g/mL ,相对标准偏差为 1 .5 % ( 1 .0× 1 0 - 6g/mLDL 酪氨酸 ,n =1 1 ) ,线性范围为 1 .0× 1 0 - 7g/mL～ 5 .0× 1 0 - 6g/mL。     

流动注射-抑制化学发光测定多贝斯的方法研究

碱性条件下 ,多贝斯对铁氰化钾鲁米诺体系的化学发光有显著抑制作用 ,提出了一种用于多贝斯质量监测的流动注射 抑制化学发光分析方法。方法的线性范围为 1 .6× 1 0 - 5g/mL～ 2 .0× 1 0 - 7g/mL ;检测限 ( 3σ)为 4 4× 1 0 - 8g/mL ;RSD为 1 .5 % (c多贝斯=2 0× 1 0 - 7g/mL ,n =1 1 ) ;采样频率为 30 0次 /h。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.