Controlling the oxidation state of arsenic in cyclic arsenic cations

Reduction of AsCl3 with SnCl2, followed by treatment of the "AsCl" with a 1,4-diimine results in electron transfer and formation of an arsenic(III) salt, while treatment of this arsenic(I) reagent or AsI3 with an alpha,alpha'-diiminopyridine ligand forms an arsenic(I) salt.     

Distribution of inorganic arsenic and methylated arsenic in marine organisms

Inorganic arsenic and methylated arsenic compounds in 60 specimens of marine organisms were investigated by hydride generation derivatization and cold-trap gas chromatography–mass spectrometry (GC MS). Chloroform–methanol extracts from seaweeds, shellfish, fish, crustaceans and other marine organisms were separated into water-soluble and lipid-soluble fractions. The arsenic compounds in each fraction were identified and analysed as arsine, methylarsine, dimethylarsine and trimethylarsine. Trimethylarsenic compounds were distributed mainly in the water-soluble fraction of muscle of carnivorous gastropods, crustaceans and fish. The amounts of dimethylated arsenic compounds were found to be larger than that of trimethylated arsenic in the lipid-soluble fraction of fish viscera. Dimethylated arsenic compounds were distributed in the water-soluble fraction of Phaeophyceae.     

Formation and oxidation state of CeO(2-x) nanotubes

Well-crystalline CeO(2-x) nanotubes are synthesized via a mild hydrothermal reaction route using cerium nitrate and ammonium hydroxide as reactants. The CeO(2-x) nanotubes have the same structure as the bulk CeO2 but larger lattice parameter. The measurement of the ratio of M5/M4 edge shows the valence reduction of cerium ions for the CeO(2-x) nanotubes.     

Substoichiometric speciation for inorganic arsenic and methylated arsenic and its application to samples of marine organisms

A substoichiometric isotope-dilution method is described for the determination of monomethylarsonate, MeAs(V), and dimethylarsinate, Me₂As(V). After the separation of MeAs(V) and Me₂As(V) by extraction as their iodides into benzene, these methylated arsenic species are complexed with a substoichiometric amount of diethyldithiocarbamate in benzene, and the uncomplexed methylarsenic species are removed. The relative standard deviations for the substoichiometric extraction of MeAs(V) and Me₂As(V) are 0.55% and 1.1%, respectively. This substoichiometric speciation of methylated arsenic together with an earlier substoichiometric method for speciation of inorganic arsenic species was applied to the speciation of arsenic in an acid-digested solution of a macro-algae sample. It was demonstrated that almost all the arsenic in this solution was Me₂As(V) even after the digestion with nitric acid.     

The Influence of Rhodium(+3) onVoltammetry of Selenium(+4) in Perchloric Acid

In comparison with previously described voltammetric behavior of selenium(+4)–rhodium(+3) system in sulfuric or hydrochloric acid, results obtained in 0.1 mol/L perchloric acid differ significantly. The difference includes: a) number of signals and conditions under which they appear b) current‐concentration plots with nonzero intercepts c) unusual dependence of the peak characteristics on the speed of the applied technique and d) much more pronounced peak height enhancement. In square wave voltammetry the signal at ?0.75 V can be even 230 times higher with rhodium(+3) than without it. Most probably the peak at ?1.15 V corresponds to the catalytic reduction of hydrogen ions whereas the signal at ?0.75 V is additionally influenced by some other processes. Results are highly dependent on the form of rhodium(+3) in the initial solution and qualitatively similar to those previously obtained with sulfur compounds and dissolved metal catalysts.     

HG-FAAS法测定雄黄染毒小鼠肝及肾脏中的砷含量

建立了氢化物发生-火焰原子吸收法(HG-FAAS)测定雄黄染毒小鼠肝及肾脏中砷含量的方法 .结果表明,该方法准确、灵敏、可靠、检出限低.雄黄染毒小鼠肝、肾脏中砷的分布水平相当.同时对氢化物发生条件进行了优化.     

Gold as hydrogen: structural and electronic properties and chemical bonding in Si3Au3(+0-) and comparisons to Si3H3(+0-)

A single Au atom has been shown to behave like H in its bonding to Si in several mono- and disilicon gold clusters. In the current work, we investigate the AuH analogy in trisilicon gold clusters, Si3Au3(+0-). Photoelectron spectroscopy and density functional calculations are combined to examine the geometric and electronic structure of Si3Au3-. We find that there are three isomers competing for the ground state of Si3Au3- as is the case for Si3H3-. Extensive structural searches show that the potential energy surfaces of the trisilicon gold clusters (Si3Au3-, Si3Au3, and Si3Au3+) are similar to those of the corresponding silicon hydrides. The lowest energy isomers for Si3Au3- and Si3Au3 are structurally similar to a Si3Au four-membered ring serving as a common structural motif. For Si3Au3+, the 2pi aromatic cyclotrisilenylium auride ion, analogous to the aromatic cyclotrisilenylium ion (Si3H3+), is the most stable species. Comparison of the structures and chemical bonding between Si3Au3(+0-) and the corresponding silicon hydrides further extends the isolobal analogy between Au and H.     

Absorption spectra of uranium(+3) in solution

The absorption spectra of uranium(+3) in 2 M HClO₄, of uranium(+3) chloro-complexes in anhydrous methyl alcohol and dimethylformamide, and of uranium(+3) thiocyanato-complexes in anhydrous methyl alcohol, were recorded in the range 4000–50,000 cm⁻¹.An intensity analysis of f-f transitions of the uranium(+3) spectra in 2 M HClO₄ and anhydrous methyl alcohol, has been made and is discussed with respect to the energy level assignment.Calculations of the “free ion” energy levels, were carried out in order to determine which states of the configuration 5f³ are most sensitive to changes in the energy level parameters.     

Biosorption of chromium(VI) and arsenic(V) onto methylated yeast biomass

Yeast biomass was methylated in a 0.1 M HCl methyl alcohol solution at room temperature and the methylated yeast (MeYE) was applied to the adsorptive separation of Cr(VI) and As(V) anions from aqueous solutions. At near-neutral pH, while Cr(VI) and As(V) anions were scarcely adsorbed onto unmethylated yeast biomass, the amounts adsorbed increased with increasing methylation degree. The amount of Cr(VI) adsorbed onto MeYE was almost constant at pH 4-6 and decreased with increasing pH above pH 6. The amount of As(V) adsorbed onto MeYE was rather lower than that of Cr(VI) and it had a peak at about pH 7. A metal-binding model was used to describe the adsorption characteristics of Cr(VI) and As(V) on MeYE. The results showed that MeYE has two different types of adsorption sites. The saturated amount of Cr(VI) and As(V) adsorbed onto MeYE having methylation degree 0.94 was 0.55 mmol g(-1).     

Metabolomic study in plasma,liver and kidney of mice exposed to inorganic arsenic based on mass spectrometry

The mechanism of arsenic toxicity still remains unclear, although enzymatic inhibition, impaired antioxidants metabolism and oxidative stress may play a role. The toxicological effects of trivalent inorganic arsenic on laboratory mouse Mus musculus after oral administration (3 mg/kg body weight/day) were investigated along 12 days, using a metabolomic approach based on direct infusion mass spectrometry to polar and lipophilic extracts from different organs and fluids (liver, kidney, and plasma). Positive and negative acquisition modes (ESI⁺/ESI^?) were used throughout the experiments. The most significant endogenous metabolites affected by exposure were traced by partial least square-discriminant analysis and confirmed by tandem mass spectrometry (MS/MS) and gas chromatography coupled to MS. In this work, the toxic effect of arsenic has been related with important metabolic pathways, such as energy metabolism (e.g., glycolysis, Krebs cycle), amino acids metabolism, choline metabolism, methionine cycle, and degradation of membrane phospholipids (cell apoptosis). In addition, this work illustrates the high reliability of mass spectrometry based on a metabolomic approach to study the biochemical effects induced by metal exposure.

Voltammetric Study of Reduction Processes in Rhodium(+3)–Selenium(+4) Acidic Mixtures

Using square‐wave voltammetry and linear scan voltammetry, some reduction processes, that take place on the hanging mercury drop electrode (HMDE) in rhodium(+3)–selenium(+4) mixtures, were studied in highly acidic sulfate, chloride and perchlorate solutions. The special attention was paid to the peak located at ?1.1 V, that reflects catalytic hydrogen evolution on the rhodium islets, and its changes under the influence of added selenium(+4), or selenium(?2) produced at the electrode. It can be concluded that addition of selenite to a dilute rhodium solution has the similar effect as the increase of rhodium(+3) concentration, making the catalytic hydrogen evolution more pronounced, probably by changing the properties of metal clusters on the mercury drop. If so, the effect could be of some practical importance in production of rhodium deposits on other surfaces, too.     

Determination of inorganic and methylated arsenic species in marine organisms and sediments

The determination of inorganic arsenic, monomethylarsenic and dimethylarsenic in marine organisms and estuarine sediments is described. The arsenic species are isolated by solvent extraction, separated by ion-exchange chromatography and selectively determined by aisine generation. Recoveries of spikes of 5 and 10 μg of arsenic taken through the whole procedure were 92–96%. Typical results obtained in a study of the forms of arsenic in several species of macroalgae, tissues of Mercenaria mercenaria and estuarine sediments are given.     

Irreversible adsorption of methyl arsenic, arsenate, and phosphate onto goethite in arsenic and phosphate binary systems

Replacement of one anion from goethite with another provides useful insight into the irreversible adsorption of the first added anion in a binary system. The objective of this study was to investigate the irreversible adsorption of dimethylarsinate (DMA), monomethylarsonate (MMA), arsenate, and phosphate onto goethite at pH 4 in phosphate and arsenic binary systems by adding two anions sequentially. The density of irreplaceable phosphate or arsenic on goethite decreases to a limit with an increase in the initial concentration of the other anion. This limit is the density of MMA, arsenate, and phosphate that irreversibly adsorbs onto goethite, which depends on the adsorption density of these species in the adsorption phase. The highest limit of phosphate that cannot be replaced with DMA, MMA, and arsenate is respectively 1.9, 0.5, 0.8 micromol m(-2). The limit of irreplaceable DMA is zero, and the highest limit of irreplaceable MMA and arsenate is 0.9 and 1.1 micromol m(-2), respectively. The results indicate that the irreversible adsorption of one specific anion in arsenic and phosphate binary systems is affected not only by the adsorption density of this anion before the addition of the other anion but also by the nature of the other.     

Stabilised phosphorus(I) and arsenic(I) iodide: readily-synthesised reagents for low oxidation state main group chemistry

Herein we report a surprisingly facile and clean synthesis of base-stabilised phosphorus(I) and arsenic(I) iodide salts, which are reagents that provide convenient access to new low oxidation state main group compounds.     

Ionomic profiling of Nicotiana langsdorffii wild-type and mutant genotypes exposed to abiotic stresses

To provide a new insight into the response of plants to abiotic stresses, the ionomic profiles of Nicotiana langsdorffii specimens have been determined before and after exposure to toxic metals (chromium) or drought conditions. The plants were genetically transformed with the rat glucocorticoid receptor (GR) or the gene for Agrobacterium rhizogenes rolC, because these modifications are known to produce an imbalance in phytohormone equilibria and a significant change in the defence response of the plant. Elemental profiles were obtained by developing and applying analytical procedures based on inductively coupled plasma atomic emission and mass spectrometry (ICP–AES/MS). In particular, the removal of isobaric interferences affecting the determination of Cr and V by ICP–MS was accomplished by use of a dynamic reaction cell, after optimization of the relevant conditions. The combined use of ICP atomic emission and mass spectrometry enabled the determination of 29 major and trace elements (Ba, Bi, Ca, Cd, Co, Cr, Cu, Eu, Fe, Ga, K, Li, Mg, Mn, Mo, Na, P, Pb, Pt, Rb, S, Sb, Sn, Sr, Te, V, W, Y, and Zn) in different parts of the plants (roots, stems, and leaves), with high accuracy and precision. Multivariate data processing and study of element distribution patterns provided new information about the ionomic response of the target organism to chemical treatment or water stress. Genetic modification mainly affected the distribution of Bi, Cr, Mo, Na, and S, indicating that these elements were involved in biochemical processes controlled by the GR or rolC genes. Chemical stress strongly affected accumulation of several elements (Ba, Ca, Fe, Ga, K, Li, Mn, Mo, Na, P, Pb, Rb, S, Sn, Te, V, and Zn) in different ways; for Ca, Fe, K, Mn, Na, and P the effect was quite similar to that observed in other studies after treatment with other transition elements, for example Cu and Cd. The effect of water deficit was less evident, mainly consisting in a decrease of Ba, Cr, Na, and Sr in roots.

Simultaneous determination of arsenite and arsenate in arsenic trioxide injection by dual detection ion chromatography

This paper describes a rapid method to determine arsenite assay and arsenate impurity in Arsenic Trioxide Injection using a single conductivity detector. The arsenite assay was determined in a non-suppressed conductivity detection mode and arsenate impurity was quantified in a suppressed conductivity detection mode. Dual-conductivity detections were enabled by valve switching and time programming. The method was validated with respect to specificity, linearity, precision, accuracy, stability, and limit of quantification. The limit of detection and quantification for arsenite were 0.855 mg/L and 2.593 mg/L, and 0.044 mg/L and 0.133 mg/L for arsenate, respectively.     

Osmium(VIII) oxidation of arsenic(III) in aqueous sulphuric acid

The oxidation of As^III by Os^VIII or Os^VI in aqueous H₂SO₄ follows the rate law:

Comparisons of survival time estimates for niigata prefecture (japan) residents exposed to ingested arsenic

Survival analysis was used to analyze follow-up data on an arsenic-poisoned area, identified in 1959, in order to assess the effect of arsenic on survival time. The subjects were 443 residents of Namiki-cho, Nakajo-machi, Niigata Prefecture, Japan, who ingested well water contaminated with arsenic between 1955 and 1959. Their exposure to arsenic was only by ingestion of well water. We observed this historical cohort from October 1959 to February 1992. Survival time was calculated in two ways: from 1959 (the end of exposure) until death or until 1992 (the termination of follow-up); or from birth until death or until 1992. The entire cohort was divided into two groups according to the arsenic concentration measured in the wells in 1959. Different survival curves of the two were drawn using the Kaplan–Meier method. The lifetime survival curves indicate that the lifetimes of arsenic-exposed residents were significantly shorter than that of the low-dose exposure group or of unexposed residents. From the differences in the estimated lifetime survival curves, the effect of arsenic on the mortality of the residents can be inferred.     

Kinetics and mechanism of oxidation of arsenic(III) by ferriccyanide in methanol-water mixtures

Summary The kinetics of the outer-sphere oxidation of the arsenic(III) by ferricyanide have been studied spectrophotometrically in MeOH–H₂O solvent mixtures covering the range 0–65 wt% at the range of 20–45°C. The effect of solvent on rate of the reaction has been investigated. On the basis of this study, a mechanism of this reaction has been suggested and the activation thermodynamic parameters are calculated.