An electrochemical quercetin (QR) sensor is described that is based on the use of magnetic reduced graphene oxide (MrGO) incorporated into a molecularly imprinted polymer (MIP) on the surface of a screen-printed electrode (SPE). The MrGO consists of reduced graphene oxide (rGO), magnetite (Fe3O4) and silver nanoparticles (Ag). The analyte (QR) is electrostatically adsorbed on the surface of the MrGO. Finally, the MIP was deposited via in-situ polymerization. The composite was characterized by X-ray diffraction, Fourier transform infrared spectroscopy and Vibrating sample magnetometry. The morphologies and electrochemical properties of different electrodes were characterized by Field emission scanning electron microscopy, Electrochemical impedance spectroscopy and differential pulse voltammetry. Under optimal conditions, the modified electrode has a linear response in the 20 nM to 250 μM QR concentration range. The limit of detection is 13 nM (at an S/N ratio of 3). The electrode is selective, stable, regenerable and reliable. It was applied to the determination of QR in spiked pharmaceutical samples and gave satisfactory results.
Graphical abstract Schematic presentation of a method for sensing quercetin. It is based on the use of screen printed electrode modified with magnetized reduced graphene oxide and a molecularly imprinted polymer.
Herein, we report a rapid and facile fabrication of Ag/C hybrid by anchoring Ag nanoparticles in amorphous carbon network for application in amperometric sensing of hydrogen peroxide. Ag/C hybrid was prepared by simply mixing silver nitrate aqueous solution with ethylene glycol and diphosphorus pentoxide in one step at room temperature. The embedding of Ag nanoparticles into the amorphous carbon support can greatly strengthen the stability of Ag nanoparticles, protecting them from oxidizing without loss of conductivity. The nanocomposite was investigated by transmission electron microscopy, energy dispersive X-ray analysis, X-ray diffraction technique, X-ray photoelectron spectroscopy and electrochemical measurements. The prepared Ag/C hybrid was fabricated onto the surface of glassy carbon electrode to investigate the sensing property towards hydrogen peroxide. The fabricated electrochemical sensor can determine hydrogen peroxide with a detection limit of 0.1 μM and up to 5.5 mM. 相似文献
We report on the single-step preparation of a composite consisting of graphene oxide (GO), Prussian blue (PB) and chitosan (Chit) that was deposited on a glassy carbon electrode and then used to determine hydrogen peroxide. The composite was obtained by mixing GO, Chit, potassium ferricyanide and ferric chloride and keeping it at 90 °C for 1 h. This method is simple and inexpensive, and does not require purification, centrifugation or sedimentation. Scanning electron microscopy, UV-vis spectroscopy, Fourier transform IR spectroscopy and X-ray diffraction were used to characterize the GO-PB-Chit composites and revealed that PB nanoparticles were formed and uniformly distributed on the surfaces of the GO due to the integrating effects of Chit and GO. The composite displayed electrocatalytic activity in the reduction of hydrogen peroxide to which it responded with good linear relationship in the 1.0 μM to 1.0 mM concentration range, with a detection limit of 0.1 μM (at S/N?=?3).
Figure
One-step preparation of graphene oxide (GO)-Prussian blue (PB)-chitosan (Chit) composites for H2O2 detection is reported. This method is simple and low-cost, and can be completed by the one-step process without further process like purification, centrifugation and sedimentation 相似文献
We describe a high-performance nitric oxide (NO) sensor by using a nanocomposite consisting of platinum-tungsten alloy nanoparticles, sheets of reduced graphene oxide and an ionic liquid (PtW/rGO-IL) that was deposited onto the surface of a glassy carbon (GC) electrode. The modified GC electrode exhibits excellent electrocatalytic activity toward the oxidation of NO with a strong peak at 0.78 V vs. Ag/AgCl due to the synergistic effects of bimetallic PtW nanoparticles, reduced graphene oxide nanosheets and an ionic liquid. The sensor possesses a detection limit as low as 0.13 nM, high sensitivity (3.01 μA μM?1 cm2), and good selectivity over electroactive interferents that may exist in biological systems. The sensor was tested to selectively distinguish NO in actual human serum and urine samples, confirming potential practical applications. In our perception, the approach described here may be extended to the fabrication of various kind of composites made from metal nanostructures, graphene and ionic liquids for medical and environmental analysis.
Graphical abstract Enhanced electrochemical sensing of nitric oxide (NO) is demonstrated by utilizing the synergistic effects of bimetallic PtW nanoparticles dispersed on reduced graphene oxide and ionic liquid nanocomposite.
Journal of Solid State Electrochemistry - In this work, nickel nanoparticles (NiNPs) and graphene oxide (GO) were synthesized and characterized independently using spectroscopic and microscopic... 相似文献
The development of an accurate and low-cost monitoring technique for hydrogen peroxide (H2O2) is a crucial demand in environment, food industry, medicine and biology. Herein, we report the design and synthesis of viologen terminated second (G2.0) and third generation (G3.0) poly(amidoamine) PAMAM dendrimers, followed by encapsulation with gold nanoparticles to form G2.0 and G3.0 Vio-PAMAM-AuNPs. The G2.0 and G3.0 Vio-PAMAM-AuNPs were deposited over glassy carbon electrode (GCE) to form G2.0 and G3.0 Vio-PAMAM-AuNPs/GCE modified electrodes, respectively. The electrochemical behavior of G2.0 and G3.0 Vio-PAMAM-AuNPs/GCEs were investigated using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Both the G2.0 and G3.0 Vio-PAMAM-AuNPs/GCEs showed a pair of well-defined redox peaks in 0.1 M phosphate buffer corresponding to the redox behavior of viologen V2+?V?+ radical. G3.0 Vio-PAMAM-AuNPs/GCE has shown a higher current response than that of the G2.0 Vio-PAMAM-AuNPs/GCE and further the G3.0 Vio-PAMAM-AuNPs/GCE demonstrated impressive electrocatalytic activity towards reduction of H2O2, based on which a nonenzymatic sensor for the detection of H2O2 has been developed. The developed nonenzymatic sensor has displayed excellent performance towards H2O2 detection in the broad linear range of 0.1 mM – 6.2 mM with a low detection limit of 27 μM and high sensitivity of 202.7 μA mM?1 cm?2. The G3.0 Vio-PAMAM-AuNPs/GCE modified electrode with its extensive dendritic structure creating tailored sanctuary to accommodate a large number of viologen mediator and AuNPs exhibited good operational and long term stability and further the quantification of H2O2 in real samples has been verified by standard addition method. 相似文献
The direct electrocatalytic reduction of hydrogen peroxide in alkaline medium at a carbon ionic liquid electrode modified with copper oxide nanoparticles was investigated. The electrode was prepared by mixing graphite particles, ionic liquid (n-octylpyridium hexafluorophosphate) and copper oxide nanoparticles. Unlike the film-modified electrode, the fabrication of this electrode is simple and highly reproducible. The combination of the good conductivity of the ionic liquid and the high catalytic activity of the nanoparticles resulted in an electrode with attractive properties for the determination of hydrogen peroxide. The concentration of NaOH and the loading of copper oxide nanoparticles were optimized. The linear range for the determination of hydrogen peroxide is from 1.0 μM to 2.5 mM, the detection limit is 0.5 μM. High stability, sensitivity, selectivity and reproducibility, fast response, the ease of preparation, and surface renewal made the electrode well suitable for the determination of hydrogen peroxide in real samples. 相似文献
A nanocomposite consisting of reduced graphene oxide decorated with palladium-copper oxide nanoparticles (Pd-CuO/rGO) was synthesized by single-step chemical reduction. The morphology and crystal structure of the nanocomposite were characterized by field-emission scanning electron microscopy, high resolution transmission electron microscopy and X-ray diffraction analysis. A 3-electrode system was fabricated by screen printing technology and the Pd-CuO/rGO nanocomposite was dropcast on the carbon working electrode. The catalytic activity towards glucose in 0.2 M NaOH solutions was analyzed by linear sweep voltammetry and amperometry. The steady state current obtained at a constant potential of +0.6 V (vs. Ag/AgCl) showed the modified electrode to possess a wide analytical range (6 μM to 22 mM), a rather low limit of detection (30 nM), excellent sensitivity (3355 μA∙mM−1∙cm−2) and good selectivity over commonly interfering species and other sugars including fructose, sucrose and lactose. The sensor was successfully employed to the determination of glucose in blood serum.
A highly sensitive nonenzymatic electrochemical sensor was fabricated using a Pd-CuO composite with reduced graphene oxide. The sensor has a wide detection range and was used to sense glucose in blood serum
We report on a simple and rapid method for the preparation of a disposable palladium nanoparticle-modified graphite pencil electrode (PdNP-GPE) for sensing hydrogen peroxide (H2O2). The bare and PdNP-modified GPEs were characterized by cyclic voltammetry and SEM. The two electrodes displayed distinct electrocatalytic activities in response to the electrochemical reduction of H2O2. The amperometric detection limits were 45 nM and 0.58 mM, respectively, for the PdNP-GPE and bare-GPE, at an S/N of 3. The electrodes can be prepared simply and at low cost, and represent a promising tool for sensing H2O2.
A composite consisting of chitosan containing azidomethylferrocene covalently immobilized on sheets of reduced graphene oxide was drop-casted on a polyester support to form a screen-printed working electrode that is shown to enable the determination of nitrite by cyclic voltammetry and chronoamperometry. Both reduction and oxidation of nitrite can be accomplished due to the high electron-transfer rate of this electrode. Under optimal experimental conditions (i.e. an applied potential of 0.7 V vs. Ag/AgCl in pH 7.0 solution), the calibration plot is linear in the 2.5 to 1450 μM concentration range, with an ~0.35 μM limit of detection (at a signal-to-noise ratio of 3). The sensor was successfully applied to the determination of nitrite in spiked mineral water samples, with recoveries ranging between 95 and 101 %.
Graphical abstract We describe the design of ferrocene-functionalized reduced graphene oxide electrode and its electrocatalytic properties towards the determination of nitrite. Compared to a reduced graphene oxide electrode, the sensor exhibits enhanced electrocatalytic activity towards both oxidation and reduction of nitrite.
We have synthesized nitrogen-doped graphene nanoribbons (N-GrNRs) by unzipping multi-walled carbon nanotubes (CNTs) under strongly oxidizing conditions and subsequent doping with nitrogen by a low-temperature hydrothermal method. The N-GNRs were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy, and assembled on a disposable screen-printed carbon electrode to give a sensor for H2O2 that was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, chronocoulometry and chronoamperometry. The nano-modified electrode displays enhanced electron transfer ability, and has a large active surface and a large number of catalytically active sites that originate from the presence of nitrogen atoms. This results in a catalytic activity towards H2O2 reduction at near-neutral pH values that is distinctly improved compared to electrodes modified with CNTs or unzipped (non-doped) CNTs only. At a working potential of −0.4 V (vs. Ag/AgCl), the amperometric responses to H2O2 cover the 5 to 2785 μM concentration range, with a limit of detection as low as 1.72 μM. This enzyme-free electrochemical sensor exhibits outstanding selectivity and long-term stability for H2O2 detection.
Nitrogen-doped graphene nanoribbons (N-GrNRs) were expediently synthesized for highly sensitive and selective detection of H2O2.
