磁致伸缩超声换能器阻抗匹配网络的设计

根据磁致伸缩超声换能器的等效电路模型和阻抗匹配理论,该文设计了一种优化的π型匹配网络.该网络具有调谐、变阻和滤波的功能,适用于工作在中低频超声频率范围内的磁致伸缩超声换能器系统的阻抗匹配.仿真和实验结果表明:接入该π型阻抗匹配网络后,驱动电源与换能器之间实现了最大功率传输,换能器两端电信号的波形质量得到优化,换能器激励...     

基于超磁致伸缩材料的光纤光栅调谐范围研究

研究了基于超磁致伸缩材料实现对光纤布拉格光栅的动态调谐这一方案理论上可获得的最大调谐范围．利用超磁致伸缩换能器的输出特性,进行了超磁致伸缩换能器用于光纤布拉格光栅调谐的实验研究．分析了实验中影响可获得调谐范围的各种因素,如实际可获得的超磁致伸缩材料的特性、光纤布拉格光栅的特性以及换能器结构的设计．进一步讨论了在理论界限的前提下改进该方案可获得调谐范围的措施,并以施加预应力为例进行了实验验证．结果表明,通过给予超磁致伸缩材料合适的预应力,可以较明显地改善最大调谐范围．     

铁镓单晶Janus-Helmholtz换能器

针对深水、低频、宽带换能器的技术需求,结合Janus-Helmholtz换能器的结构特点和铁镓单晶材料低场应变大及机械强度高的特性,提出了铁镓单晶Janus-Helmholtz换能器设计方案。采用永磁偏磁场和环形闭合磁路,建立了一系列铁镓单晶磁致伸缩换能器理论分析模型,包括对磁致伸缩材料参数进行线性化处理,设计了换能器最佳工作点,结合静态磁场和动态磁场分布情况分段细化换能器驱动等效参数,以及利用全阻抗模型通过电感损耗等效计算换能器静态阻抗,然后通过二维有限元分析等效模型,优化分析了换能器的结构参数与电声性能。最后制作了换能器样机,并进行了测试与分析。对比仿真和测试结果表明:全阻抗模型得到的阻抗曲线与样机测试结果相一致,有限元等效模型计算的发送电流响应与样机测试结果良好吻合。换能器样机水中谐振基频为1000 Hz,谐振频率下发送电流响应176.4 dB;在875～2300 Hz频率范围内,发送电流响应起伏不大于6 dB;增加驱动电流有效值到16.2 A,最大声源级可以达到196.2 dB。     

Analysis of internal wave reflection within a magnetostrictive patch transducer for high-frequency guided torsional waves

Recently, megahertz-range torsional waves have been successfully generated and measured by a magnetostrictive patch transducer employing a meander coil. But the waveform of a high-frequency torsional wave generated by magnetostrictive patch transducers becomes greatly distorted with multiple trailing pulses. The hypothesis explaining the cause of the waveform distortion is that the distortion results mainly from the internal wave reflection within the magnetostrictive patch, which is in turn caused by the impedance mismatch between the bare and patch-bonded parts of the pipe. Based on the hypothesis, we developed an analytic model for internal reflection simulation and conducted several experiments using a patch transducer to verify the hypothesis. The comparison of the analytical and experimental results showed that the internal reflection at the edge of the patch was responsible for the distortion of the measured waveform. The present study also confirmed that the standard acoustic impedance matching to avoid sudden discontinuities at the patch edges can effectively reduce the internal reflection and alleviate the waveform distortion problem.     

叠合结构超低频弯张换能器

研究了一种将多个椭圆弯张壳体在短轴方向进行机械叠合的超低频弯张换能器,每个弯张壳体采用超磁致伸缩材料进行驱动。推导了多个叠合壳体的等效电路,利用支路阻抗方法得到了换能器频率和阻抗的方程表达式。针对多个壳体叠合的结构复杂性,采用有限元方法计算并分析了叠合壳体换能器的多个结构点的振动位移分布,通过平动位移分布设计了活塞辐射面的结构参数。将有限元方法计算的换能器在空气中和水中的谐振频率与等效电路法计算的结果进行了对比,符合较好。研制了6个壳体叠合的超低频弯张换能器样机,换能器外形尺寸为Φ230×630 mm,重量为39 kg。换能器经湖上试验,水中谐振频率130 Hz,最大发送电流响应161.1 dB,最大发射声源级为180.4 dB,实现了超低频、小尺寸的发射能力。      

Electromechanical impedance measurement from large structures using a dual piezoelectric transducer

This study develops a new electromechanical (EM) impedance measurement technique specifically for continuous monitoring of large structures. Conventionally, a single surface-mounted lead zirconate titanate (PZT) transducer is often used to measure the EM impedance of a coupled PZT-structure system for damage diagnosis. However, when the target structure is massive, the impedance measurement becomes challenging. In this study, a dual piezoelectric transducer, composed of two separate but concentric PZT segments, is used for effective measurement of the EM impedance from large-scale structures. The impedance measurement using the dual PZT is theoretically formulated and numerically verified. Then, a series of experiments are carried out on a laboratory-size specimen and full-scale bridge and building structures. The experimental results reveal that the proposed technique successfully measures the EM impedance signals from massive structures with a high signal-to-noise ratio (SNR) and good repeatability even when the conventional techniques fail to do so. At the same time, the proposed technique allows low-cost and fast measurement of impedance signals.     

Acoustic energy output of a transducer unit

The acoustic energy output of a magnetostrictive transducer unit has been observed by the calorimetric method. The object was to observe the energy output of the unit from low to high ultrasonic intensities under identical conditions of transducer frequency and acoustic load. The design and construction of the calorimeter and its mode of operation are discussed in some detail.     

铁镓Janus-Helmholtz换能器非线性驱动

利用磁路法理论分析了磁阻对铁镓驱动磁场的影响,结果表明磁路中无永磁体时铁镓驱动磁场是有永磁体时的5倍以上,结合铁镓材料近似线性区小的特点,提出了一种无偏场非线性驱动方式。首先利用帕德逼近方法近似铁镓材料的磁化过程,得到磁场强度与磁致伸缩应变的关系,进而得到驱动电信号表达式,在此基础上提出了铁镓换能器的非线性驱动模型。设计研制了无偏场铁镓Janus-Helmholtz换能器样机,通过振动特性实验分析验证非线性驱动模型的可行性,最后在水中测试了换能器的发射性能。测试结果表明,采用无偏场非线性驱动的换能器在驱动电流为9.4 A时,声源级可达到198.2 dB,相对于永磁偏置磁场的换能器,声源级高了4 dB,发射性能得到了明显的提升。     

宽光谱AOTF匹配网络对光谱衍射效率影响的研究

基于声光可调滤波器(acousto-optic tunable filter,AOTF)光谱成像分析仪在可见至红外光谱的多个谱区内广泛应用,对AOTF的光谱带宽及衍射效率提出了更高的要求。超声换能器作为AOTF的核心部件,其3 dB工作带宽决定AOTF的光谱衍射范围,故在同一声光介质上制作两片厚度不同的换能器来提高AOTF光谱带宽。由于超声换能器在不同频率下具有不同的输入阻抗,当驱动信号源输出阻抗与超声换能器输入阻抗失配时会产生能量损耗,导致无法把功率最大限度的传递给超声换能器,从而使AOTF光谱衍射效率降低,影响光谱成像清晰度。通过射频电路先进设计系统(ADS)仿真及实验测试,设计了一种新型宽带阻抗匹配网络,在60～200 MHz带宽范围内,阻抗匹配网络功率效率达到90％以上,光谱衍射效率最高达90％,提高了在420～1 150 nm波段内的光谱灵敏度。     

Dynamic modeling of thickness-mode piezoelectric transducer using the block diagram approach

This paper aims to provide an alternative method to determine the characteristics of a piezoelectric transducer from measurement. A block diagram approach is proposed to analyze the dynamic characteristics of a thickness-mode piezoelectric transducer at its resonance frequency. Based on the feedback loop framework, the input-output relations of the electromechanical interaction of the transducer are described in terms of linear block diagram models. Furthermore, the closed-loop relations from external force to vibration velocity and electric current from generated voltage are easily found by Mason’s rule to characterize the equivalent mechanical admittance and electrical impedance, respectively. An example of a Langevin transducer with 28.15 kHz resonance frequency is illustrated for dynamics analysis. The frequency responses of the piezoelectric transducer, resulting from a force and current input, are respectively measured to identify the system parameters of the feedback model. The experimental results demonstrate the effectiveness of the proposed method.     

抽指加权宽带扇形叉指声表面波滤波器的等效电路分析

扇形换能器可以看成若干个沿孔径方向划分的均匀孔径换能器电端并联而成，根据梅森(Mason)等效电路模型以及由其延伸的混合场等效电路模型，推导出整个扇形换能器的导纳矩阵和频率响应，其中采用复阻抗模型考虑了叉指电极与自由表面的阻抗不连续的因素。本方法能够模拟指间反射、三次行程、指条寄生阻抗以及外围电路等对器件性能的影响；理论模拟与实验结果吻合。     

用于电流传感的声表面波磁致伸缩效应

利用声表面波(SAW)磁致伸缩效应可以实现一种快速、高灵敏度的电流检测方法,但磁致伸缩薄膜内部矫顽力导致了明显的磁滞误差。磁致伸缩薄膜的栅阵化设计可以减小磁致伸缩时薄膜内部矫顽力,抑制磁滞现象,从而实现高灵敏和低迟滞误差的SAW电流检测。结合有限元和耦合模理论对沉积铁钴(FeCo)薄膜栅阵的声表面波电流传感器中的磁致伸缩效应进行分析,对传感响应进行仿真,确定优化的传感结构参数。为验证理论分析,实验研制了频率为150 MHz的声表面波电流传感器件,并结合差分振荡电路及亥姆霍兹线圈,建立传感器测试系统.实验结果表明,磁致伸缩薄膜的栅阵设计大幅降低了迟滞误差,并显著提升了传感器灵敏度。      

A systems feedback representation of piezoelectric transducer operational impedance

An analysis of thickness-mode piezoelectric transducer impedance under a variety of mechanical load conditions is presented. A wideband, systems model is used to describe this impedance, which is representative of the electrical input impedance in the transmitting mode and the electrical output impedance for the receiving mode.For a fixed input voltage, the total current flowing through the transducer is considered as the vector sum of two current quantities. Firstly, an input current arising directly from the applied voltage source and secondly, a feedback current, which is generated by secondary piezoelectric action. By treating the problem in this manner, an extremely valuable insight into the nature of the electrical characteristics is provided. Complex variations in the impedance behaviour are readily explained and the physical processes that contribute to such deviations are clearly isolated.     

稀土Tonpilz换能器的有限元设计法

当Tonpilz换能器组件迥横截面面积之间相差较大时,应力,应变会有一定的突破,边界条件将不很连续,用四端网络方法设计会带来较大的误差,本文用有限元方法,设计并研制了一稀土Tonpilz型换能器 实验测试表明,与四端网络设计法相比,有限元方法具有更好的设计精度。     

Terfenol-D超磁致伸缩换能器的有限元模拟

本文研究了利用ＡＮＳＹＳ软件分析磁致伸缩换能器,使这一有限元分析软件能够用于Ｔｅｒｆｅｎｏｌ－Ｄ换能器的分析设计。设计了１４ｋＨｚ Ｔｅｒｆｅｎｏｌ－Ｄ纵向换能器,计算结果与实验结果符合很好。     

Torsional wave experiments with a new magnetostrictive transducer configuration

For the efficient long-range nondestructive structural health inspection of pipes, guided waves have become widely used. Among the various guided wave modes, the torsional wave is most preferred since its first branch is nondispersive. Our objective in this work is to develop a new magnetostrictive transducer configuration to transmit and receive torsional waves in cylindrical waveguides. The conventional magnetostrictive transducer for the generation and measurement of torsional waves consists of solenoid coils and a nickel strip bonded circumferentially to test pipes. The strip must be premagnetized by a permanent magnet before actual measurements. Because of the premagnetization, the transducer is not suitable for the long-term on-line monitoring of pipes buried underground. To avoid the cumbersome premagnetization and to improve the transduction efficiency, we propose a new transducer configuration using several pieces of nickel strips installed at 45 degrees with respect to the pipe axis. If a static bias magnetic field is also applied, the transducer output can be substantially increased. Several experiments were conducted to study the performance of the proposed transducer configuration. The proposed transducer configuration was also applied for damage detection in an aluminum pipe.     

The efficiency of a magnetostrictive transducer unit: Part 1

This paper introduces an analytical method of calculating the efficiency of an ultrasonic magnetostrictive transducer unit. The aim is to obtain some simple empirical formula, representative of the response of the transducer unit, which may help to reduce the amount of observed data usually required in efficiency determination by electrical measurements at the input terminals of the transducer unit.     

Monodispersion of the Investigated Flow in the Sorting Unit of a particle size optical and electrical analyser

The use of a compact cylindrical piezoelectric transducer in the jet dispersion unit of the sorting system of an optical or electrical particle size analyser is discussed. Solving two equations for the shift distribution in a piezoelectric transducer with a running fluid chamber, important expressions for the vibrational velocity of acoustic terminal, mechanical impedance, of the stable part of the jet are obtained. The practical application of this technique is illustrated by the calculation of desi parameters for an industrial dispersion unit used in an H.cytophotometer (Ortho Instruments, USA). Good agreement between theoretical and experimental results is shown.     

磁致伸缩/压电叠层复合材料磁-机-电耦合系数分析

分析和推导了磁致伸缩/压电叠层复合材料的机-电耦合系数、磁-机耦合系数及磁-电耦合系数与磁致伸缩层和压电层性能参数及几何参数之间的关系.进一步分析表明,叠层复合材料低频时的磁电电压系数正比于磁-电耦合系数,谐振时的磁电电压系数正比于磁-电耦合系数与机械品质因素的乘积;磁电电压系数还与复合结构的本征阻抗有关,本征阻抗越大磁电电压系数越大.通过性能差异较大的Terfenol-D和FeNi基弹性合金分别与压电材料PZT5-H和PZT8相互组合构成复合材料的比较分析,进一步阐明了磁电复合材料磁-电耦合系数和机械品 关键词： 磁电效应 磁-机-电耦合系数 磁致伸缩材料 压电材料     

偏置磁场对磁致伸缩/弹性/压电层合材料磁电效应的影响

根据磁致伸缩材料的非线性本构关系得到其动态杨氏弹性模量和动态压磁系数,结合等效电路法得到磁致伸缩/弹性/压电层合材料的磁电效应与磁致伸缩材料的动态杨氏弹性模量和动态压磁系数的关系,讨论了偏置磁场对这种层合材料的谐振频率和谐振磁电电压转换系数的影响.理论推导和实验结果均表明,存在最佳偏置磁场使磁致伸缩/弹性/压电层合材料的谐振磁电电压转换系数最大. 关键词： 磁致伸缩/弹性/压电层合材料 磁电效应 偏置磁场 非线性本构关系