Polymerizations of substituted cyclopropanes. I. Radical polymerization of 1,1-disubstituted 2-vinylcyclopropanes

Diethyl 2-vinylcyclopropane-1,1-dicarboxylate (Ia), 2-vinylcyclopropane-1,1-dicarbonitrile (Ib), ethyl 1-cyano-2-vinylcyclopropanecarboxylate (Ic), and 1,1-diphenyl-2-vinylcyclopropane (Id) were radically homo- and copolymerized. Ia, Ib, and Ic polymerized cleanly in 1,5-type ring-opening fashion to yield polymers of high molecular weight. Id failed to homopolymerize but copolymerized with common monomers which included maleic anhydride. Infrared (IR) spectra indicated that the double bonds of the polymer chains were in trans form. All polymers were soluble in solvents and solution-cast films were clear and flexible, showing T_g values in the 25–40°C range. Model reactions of those monomers with benzenethiol also indicated predominant 1,5-addition reactions. From the results of our investigation it was concluded that the driving force for the facile radical 1,5-polymerization of Ia, Ib, and Ic was the stabilization of growing radicals by two substituents.     

Radical ring-opening polymerization behavior of vinylcyclopropanes derived from dienes and chloroform

1,1-Dichloro-2-vinylcyclopropane ( Ia ), 1,1-dichloro-2-methyl-2-vinylcyclopropane ( Ib ), 1,1,2-trichloro-2-vinylcyclopropane ( Ic ) were prepared from the corresponding dienes and chloroform in the presence of a phase transfer catalyst (PTC), R₄N⁺Cl^?. Monomers Ia – Ic underwent a clean 1,5-type radical ring-opening process to afford the corresponding polymers in good yield. Further, the relative rate of polymerization and reaction of ( I ) with thiophenol were studied.     

Polymerization of substituted cyclopropanes. III. Anionic polymerizations of 2-substituted cyclopropane-1,1-dicarbonitriles

To investigate further the anionic ring-opening polymerization of substituted cyclopropane 2-phenylcyclopropane-1,1-dicarbonitrile (I), 2-ethylcyclopropane-1,1-dicarbonitrile (II), and 2,2-dimethylcyclopropane-1,1-dicarbonitrile (III) were prepared and polymerized with sodium cyanide in N,N-dimethylformamide. Under these conditions only I polymerized well. The polymer in I was soluble in hot sulfolane and the inherent viscosity was 0.5 dl/g (conc. 0.5 g in 100 ml). This result supports the previously postulated mechanism that a cyclopropane ring with properly positioned electron-donating and electron-withdrawing substituents can polymerize by opening the bond activated by a “push–pull” system.     

Polymerization systems driven by aromatization energy: Anionic polymerization of 4-allylidene-2,6-dimethyl-2,5-cyclohexadien-1-one and spiro[2,5]octadienone derivatives

To investigate the polymerization systems driven by aromatization energy, 4-allylidene-2,6-dimethyl-2,5-cyclohexadien-1-one ( Ia ), 5,7-dimethyl-1-vinylspiro[2,5]octa-4,7-dien-6-one ( Ib ), 4,7-dimethyl-1-vinylspiro[2,5]octa-4,7-dien-6-one [ Ic ], 2-vinyl-2′-methylspiro[cyclopropane-1,4′-(1′-naphthalenone)] ( Id ), and 2-phenyl-2′-methylspiro[cyclopropane-1,4′-(1′-naphthalenone)] ( Ie ) were prepared and polymerized with sodium cyanide in N,N-dimethylformamide. Monomer Ia was highly polymerizable even at ?65°C. Monomers Ib–Ie also polymerized well, giving powdery polymers that were soluble in common solvents. All the polymerizations took place through the aromatization of the cyclohexadienone ring, suggesting that the aromatization energy is the driving force for the polymerization of these monomers.     

Gel formation in cationic polymerization of divinyl ethers. II. 2,2-Bis{4-[(2-vinyloxy)ethoxy]phenyl}propane

Cationic polymerization of 2,2-bis{4-[(2-vinyloxy)ethoxy]phenyl}propane [CH₂CH O CH₂CH₂O C₆H₄ C(CH₃)₂ C₆H₄ OCH₂CH₂ O CHCH₂; 2], a divinyl ether with oxyethylene units adjacent to the polymerizable vinyl ether groups and a bulky central spacer, was investigated in CH₂Cl₂ at 0°C with the diphenyl phosphate [(C₆H₅O)₂P(O)OH]/zinc chloride (ZnCl₂) initiating system. The polymerization proceeded quantitatively and gave soluble polymers up to 85% monomer conversion. In the same fashion as the polymerization of 1,4-bis[2-vinyloxy(ethoxy)]benzene (CH₂CH O CH₂CH₂O C₆H₄ OCH₂CH₂ O CHCH₂; 1) that we already studied, the content of the unreacted pendant vinyl ether groups of the produced soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble products prior to gelation. Alternatively, endo-type double bonds were gradually formed in the polymer main chains by chain transfer reactions and other side reactions as the polymerization proceeded. The polymerization behavior of isobutyl vinyl ether (3), a monofunctional vinyl ether, under the same conditions, showed that the endo-type olefins in the polymer backbones are of no polymerization ability with the growing active species involved in the present polymerization systems. These results indicate that the intermolecular crosslinking reactions occurred primarily by the pendant vinyl ether groups, and the final stage of crosslinking process leading to gelation also may occur by the small amount of the residual pendant vinyl ether groups (supposedly less than 2%). The formation of the soluble polymers that almost lack the unreacted pendant vinyl ether groups is most likely due to the frequent occurrence of intramolecular crosslinking reactions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1931–1941, 1999     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. IV. New initiating systems for selective and living polymerization of p-isopropenylphenyl glycidyl ether

A variety of cationic initiators were employed for p-isopropenylphenyl glycidyl ether (IPGE), an α-methylstyrene derivative with an epoxy pendant, and optimum initiators and reaction conditions were evaluated in terms of its selective vinyl polymerization and living polymerization. Despite the coexistence of two cationically polymerizable groups in IPGE, binary initiating systems (HI, CF₃COOH, or CH₃CH(OiBu)-OCOCH₃, each coupled with ZnI₂) and sulfonic acids (CF₃SO₃H and CH₃SO₃H) selectively polymerized the vinyl group of IPGE in CH₂Cl₂ at ?78°C to produce soluble polymers with epoxy pendant groups in high yield. Metal halides (BF₃OEt₂ and AlEtCl₂) polymerized both the vinyl and epoxy groups of IPGE to give crosslinked insoluble polymers. In contrast, under these conditions, the HI/ZnI₂ system also led to a long-lived polymer, the molecular weight of which increased upon addition of a fresh feed of monomer to a completely polymerized reaction mixture, whereas the use of other initiators resulted in nonliving polymers. At higher temperatures (?40 and ?15°C), soluble poly(IPGE) was also obtained with HI/ZnI₂, but the polymer yield decreased with raising temperature, because of the occurrence of termination reaction.     

Interaction of simple acids with nylon. Part 2: Diffusion of simple acids

The paper deals with the diffusion of two mineral acids, hydrobromic and sulfuric acids, and two simple dye acids, NOG (C. I. Acid Orange 7) and SY (C.I. Food Yellow 3), in water-swollen nylon 66. Anion self-diffusion coefficients were obtained by radiotracer techniques. The bromide ion and the SY anion self-diffusion coefficients show very little variation with concentration in the amino-dyeing region, whereas the H₂SO₄ and NOG anion diffusion coefficients are concentration-dependent. The variation of the H₂SO₄ anion diffusion coefficient with concentration is consistent with the formation of small quantities of the highly mobile bisulfate ion. The low SO₄ diffusion coefficient may be explained by the interaction of this ion with single, fixed sites in the polymer. The variation of the NOG anion diffusion coefficient with concentration does not follow a simple D = D₀[1/(1 ? θ)] relationship at intermediate concentrations but the rapid increase observed as the available sites became saturated, i.e., as θ → 1, is consistent with a site saturation model.     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. III. 2-vinyloxyethyl glycidyl ether: An epoxy-functionalized vinyl ether

Cationic polymerization of 2-vinyloxyethyl glycidyl ether (VEGE), a vinyl ether with an epoxy group, was conducted with various initiators in CH₂Cl₂ in the temperature range from +15 to ?78°C, and the possibility of its selective vinyl polymerization was investigated. BF₃OEt₂ polymerized both vinyl and epoxy groups of VEGE to yield polymers partially insoluble in organic solvents. HI/I₂, iodine, and CF₃SO₃H gave soluble, low-molecular-weight oligomers with epoxy pendants. ¹H-NMR structural analysis of the oligomeric products showed that the epoxy/vinyl ratio of the pendants decreases in the order: 100% epoxy ～ CF₃SO₃H > HI/I₂ ～ I₂ ? BF₃OEt₂. Although HI/I₂ or iodine mainly polymerized the vinyl group, the reaction of the vinyl ether-type growing end with an epoxy group of VEGE took place during the polymerization, so that the monomer conversion leveled off at about 40%.     

Synthesis of heteroarm star polymers comprising poly(4-methylphenyl vinyl sulfoxide) segment by living anionic polymerization

<正>A series of 3-arm ABC and AA'B and 4-arm ABCD,AA'BC and AA′A″B heteroarm star polymers comprising one poly(4-methylphenyl vinyl sulfoxide) segment and other segments such as polystyrene,poly(α-methylstyrene), poly(4-methoxystyrene) and poly(4-trimethylsilylstyrene) were synthesized by living anionic polymerization based on diphenylethylene(DPE) chemistry.The DPE-functionalized polymers were synthesized by iterative methodology,and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers.The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide(MePVSO) initiated from the in situ formed polymer anion with two or three polymer segments.The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well.Both approaches could afford the target heteroarm star polymers with predetermined molecular weight,narrow molecular weight distribution (M_w/M_n1.03) and desired composition,evidenced by SEC,~1H-NMR and SLS analyses.These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.     

Multifunctional coupling agents for living cationic polymerization. I. Sodiomalonate anions for vinyl ethers

A series of multifunctional malonate anions, [Na^⊕?C(COOEt)₂CH₂]_mC₆H_6?m(I; m = 2–4), were examined as polymer coupling agents for the living cationic polymerization of vinyl ethers initiated with the hydrogen iodide/zinc iodide (HI/ZnI₂) initiating system. The bifunctional anion ( 2 ;I, m = 2), 1,4-[Na^⊕?C(COOEt)₂CH₂]₂C₆H₄, terminated living polymers of isobutyl vinyl ether (IBVE) (DP _n = 10) almost quantitatively in toluene at ?15°C to give coupled living polymers with doubled molecular weights in 96% yield; the dianion 2 was dissolved in tetrahydrofuran containing 18-crown-6 for maintaining the solution homogeneous. The yield of the coupled polymers was increased with shorter living chains or in less polar solvents. Also by coupling via 2 , ABA block copolymers were obtained from living AB block polymers of IBVE and an ester-functionalized vinyl ether (CH₂?CHOCH₂CH₂OCOCH₃). Coupling of living poly(IBVE) with the trifunctional anion ( 3 ; I, m = 3) led to tri-armed polymers in 56% yield, whereas with the tetrafunctional version ( 4 ; I, m = 4), only three out of the four anions reacted to give another tri-armed polymer in 85% yield. © 1993 John Wiley & Sons, Inc.     

Studies on the kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate—II. Mechanistic features in strongly acid solutions

The kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate in 1 M H₂SO₄ have been studied. Ceric ion and thiourea initially form an 1:1 complex which then reacts with uncomplexed ceric ion to form the initiating thiocarbamido radicals. The termination is predominantly biomolecular below an initial ceric concentration of 0.66 × 10^?2 M (depending upon the rate of initiation). At higher initial ceric concentrations, polymer radicals are terminated overwhelmingly by ceric ions. Substituted thioureas reduce the rate of polymerization according to the order of increasing electron density on the sulphur atom. The overall activation energy of polymerization is 12.1 kcal/mol in the region of bimolecular termination and 10.2 kcal/mol in the region of metal ion termination.     

A programmed polymer folding: click and clip construction of doubly fused tricyclic and triply fused tetracyclic polymer topologies

A tandem alkyne-azide addition, i.e., click, and an olefin metathesis condensation, i.e., clip, reactions in conjunction with an electrostatic self-assembly and covalent fixation (ESA-CF) process, have been demonstrated as effective means to produce constructions of programmed folding of polymers having doubly fused tricyclic and triply fused tetracyclic topologies. Thus, a series of cyclic poly(tetrahydrofuran), poly(THF), precursors having an allyloxy group and an alkyne group (Ia), an allyloxy group and an azide group (Ib), and two alkyne groups (Ic) at the opposite positions was prepared by means of the ESA-CF method. The subsequent click reactions of Ia with a linear telechelic poly(THF) precursor having azide end groups (Id) and of Ib with Ic afforded a bridged dicyclic polymer (IIa) and a tandem spiro tricyclic precursor (IIb), respectively, both having two allyloxy groups at the opposite positions of the ring units. Finally, the intramolecular metathesis condensation reaction of IIa and of IIb in the presence of a Grubbs catalyst was performed to construct effectively a doubly fused tricyclic and a triply fused tetracyclic polymer topologies (III and IV), respectively.     

Two novel polymorphic forms of iron‐chelating agent deferiprone

Thalassemia is a genetic blood disorder requiring life‐long blood transfusions. This process often results in iron overload and can be treated by an iron‐chelating agent, like deferiprone (3‐hydroxy‐1,2‐dimethylpyridin‐4‐one), C₇H₉NO₂, in an oral formulation. The first crystal structure of deferiprone, (Ia), was reported in 1988 [Nelson et al. (1988). Can. J. Chem. 66 , 123–131]. In the present study, two novel polymorphic forms, (Ib) and (Ic), of deferiprone were identified concomitantly with polymorph (Ia) during the crystallization experiments. Polymorph (Ia) was redetermined at low temperature for comparison of the structural features and lattice energy values with polymorphs (Ib) and (Ic). Polymorph (Ia) crystallized in the orthorhombic space group Pbca, whereas both polymorphs (Ib) and (Ic) crystallized in the monoclinic space group P2₁/c. The asymmetric units of (Ia) and (Ib) contain one deferiprone molecule, while polymorph (Ic) has three crystallographically independent molecules (A, B and C). All three polymorphs have similar hydrogen‐bonding features, such as an R₂²(10) dimer formed by O—H…O hydrogen bonds, an R₄³(20) tetramer formed by C—H…O hydrogen bonds and π–π interactions, but the polymorphs differ in their molecular arrangements in the solid state and are classified as packing polymorphs. O—H…O and C—H…O hydrogen bonds lead to the formation of two‐dimensional hydrogen‐bonded parallel sheets which are interlinked by π–π stacking interactions. In the three‐dimensional crystal packing, the deferiprone molecules were aggregated as corrugated sheets in polymorphs (Ia) and (Ic), whereas in polymorph (Ib), they were aggregated as a square‐grid network. The characteristic crystalline peaks of polymorphs (Ia), (Ib) and (Ic) were established through powder X‐ray diffraction analysis. The Rietveld analysis was also performed to estimate the contribution of the polymorphs to the bulk material.     

Polymerization of vinylcyclopropanes. II

1,5-Type polymerization of vinylcyclopropane proceeding by the opening of both the double bond and the cyclopropane ring was found. Some other vinylcyclopropane derivatives, 1,1-dichloro-2-vinylcyclopropane, 1,1-dibromo-2-vinylcyclopropane, isopropenylcyclopropane, 1-methyl-1-vinylcyclopropane, 1,1-dichloro-2-methyl-2-vinylcyclopropane, and cis- and trans-1-chloro-2-vinylcyclopropane, were investigated. The observation of infrared spectra, NMR spectra, and other data indicated that the radical polymerization of these compounds gave principally 1,5-type polymer, while in cationic polymerization 1,2-type was predominant. The behavior of the polymerization was discussed in terms of the stability of a cyclopropylcarbinyl ion or radical which is formed in the initiation and propagation steps.     

Photoinitiated free radical polymerization of vinyl compounds in aqueous solution

A new method for the photochemical initiation of polymerization of vinyl compounds in aqueous solution is described. The photochemically active species is an ion pair complex of the formula Fe³⁺X⁻(X⁻ = OH⁻, CI⁻, N⁻₃, etc.). The light absorption by the ion pair leads to an electron transfer causing reduction of the cation and oxidation of the anion to an atom or free radical X. The latter leads to the initiation of polymerization in accordance with X + CH₂CHR→XCH₂ CHR . The kinetics of the reaction were studied by the measurement of: (a) ferrous ion formed (colorimetrically), (b) monomer disappearance (by titration and by weighting the polymer), (c) the chain length of the polymer (in the case of methyl methacrylate). The dependence of the quantum yield on the light intensity, light absorption fraction, and the concentration of vinyl monomer and ferrous ion added initially was investigated. A complete mechanism, both with regard to the formation of free radicals and the polymerization reaction, was put forward involving: (1) light absorption, (2) a primary dark back reaction, (3) dissociation of the primary product, (4) a secondary dark back reaction, (5) initiation of polymerization by free radicals, (6) propagation of polymerization, and (7) termination by recombination of active polymer endings. The mechanism was verified by the experimental results and some constant ratios were estimated quantitatively.     

On the generation and characterization of the spiro[2,5]octadienyl anion in the gas phase

Three routes have been explored in both a high-pressure chemical ionization (CI) source and a low-pressure Fourier transform ion cyclotron resonance (FT-ICR) cell to generate the spiro[2,5]octadienyl anion in the gas phase: (i) proton abstraction from spiro[2,5]octa-4,6-diene; (ii) expulsion of trimethysilyl fluoride by phenyl ring participation following fluoride anion attack upon the silicon centre of 2-phenylethyl trimethylsilane; and (iii) collisionally induced dissociation (CID) of the carboxylate anion of 3-phenylpropanoic acid via carbon dioxide loss. From comparison of the CID spectra of various reference [C₈H₉]^? ions with those of the [C₈H₉]^? ions which could be generated via the routes (i) and (iii) in the CI source it can be concluded that only the third route yields a [C₈H₉]^?ion whose CID spectrum is not inconsistent with the one expected for the spiro[2,5]octadienyl anion. In the FT-ICR cell [C₈H₉]^? ions are generated along all three routes; their structures have been identified by specific ion-molecule reactions and appear to be different. Route (i) yields an α-methyl benzyl anion, probably due to isomerization within the ion-molecule complex formed. An ortho-ethylphenyl anion is formed along route (ii), presumably due to an intramolecular ortho proton abstraction in the generated trimethylsilyl fluoride solvated 2-phenylethyl primary carbanion. The [C₈H₉]^? ion formed along route (iii) shows reactions similar to those of the 1,1-dimethylcyclohexadienyl anion which is structurally related to the spiro[2,5]octadienyl anion. Furthermore, the [C₈H₉]^? ion generated via route (iii) reacts with hexafluorobenzene under expulsion of only one hydrogen fluoride molecule which contains exclusively one of the original phenyl ring hydrogen atoms. On the basis of all these observations it is therefore quite likely that the spiro[2,5]octadienyl anion is formed by collisionally induced decarboxylation of the 3-phenylpropanoic acid carboxylate anion and can be a long-lived and stable species in the gas phase.     

Poly(ionic liquid)s based on imidazolium hydrogen carbonate monomer units as recyclable polymer‐supported N‐heterocyclic carbenes: Use in organocatalysis

Synthesis of novel poly(ionic liquid)s, namely, poly(1‐vinyl‐3‐alkylimidazolium hydrogen carbonate)s, denoted as poly([NHC(H)][HCO₃])s or PVRImHCO₃, where R is an alkyl group (R = ethyl, butyl, phenylethyl, dodecyl), is described. Two distinct synthetic routes were explored. The first method is based on the free‐radical polymerization (FRP) of 1‐vinyl‐3‐alkylimidazolium monomers featuring a hydrogen carbonate counter anion (HCO₃^?), denoted as VRImHCO₃. The latter monomers were readily synthesized by alkylation of 1‐vinylimidazole (VIm), followed by direct anion exchange of 1‐vinyl‐3‐alkylimidazolium bromide monomers (VRImBr), using potassium hydrogen carbonate (KHCO₃) in methanol at room temperature. Alternatively, the same anion exchange method could be applied onto FRP‐derived poly(1‐vinyl‐3‐alkylimidazolium bromide) precursors (PVRImBr). All PVRImHCO₃ salts proved air stable and could be manipulated without any particular precautions. They could serve as polymer‐supported precatalysts to generate polymer‐supported N‐heterocyclic carbenes, referred to as poly(NHC)s, formally by a loss of “H₂CO₃” (H₂O +CO₂) in solution. This was demonstrated through selected organocatalyzed reactions of molecular chemistry, known as being efficiently mediated by molecular NHC catalysts, including benzoin condensation, transesterification and cyanosilylation of aldehyde. Of particular interest, recycling of the polymer‐supported precatalysts was possible by re‐carboxylation of in situ generated poly(NHC)s. Organocatalyzed reactions could be performed with excellent yields, even after five catalytic cycles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4530–4540     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005     

Cationic polymerization of cyclic dienes. X. Cationic polymerization of 1-vinylcyclohexene and 3-methyl-1,3-pentadiene

1-Vinylcyclohexene (VCH), which has one of the double bonds in the ring and the other outside the ring, was synthesized and polymerized by cationic catalysts. The reactivity of VCH was very large in the polymerizations catalyzed by boron trifluoride etherate (BF₃OEt₂) and stannic chloride–trichloroacetic acid complex. Similar to other cyclic dienes, the polymerization of VCH was a nonstationary reaction having a very fast initiation step. The polymerization proceeded by either a 1,2- or a 1,4-propagation mode in which vinyl group was always involved. Particularly when BF₃OEt₂ was used as a catalyst, an intramolecular proton or an intramolecular hydride ion transfer reaction took place, resulting in the formation of methyl groups in the polymer. The degree of polymerization of polymer formed was about 10. This indicates the preponderance of monomer transfer reaction. To investigate the reason for the high reactivity of cyclic dienes, cationic copolymerizations of VCH and 3-methyl-cis/trans-1,3-pentadiene (cis/trans-MPD) was carried out. The relative reactivity of monomers decreased in the order VCH > trans-MPD > cis-MPD. On the other hand, the resonance stabilization of monomers decreased in the order VCH > trans-MPD > cis-MPD. Therefore, it could be considered that the monomer reactivity is mainly determined by the stability of carbonium ion intermediate. The relative stability of carbonium ion must be VCH > trans-MPD > cis-MPD. Thus the influence of the conformation of ion on its stability was clearly demonstrated.     

Stereospecific polymerization of isobutyl vinyl ether. III. Polymerization with VCl3 • LiCl

The polymerization of isobutyl vinyl ether by vanadium trichloride in n-heptane was studied. VCl₃ ? LiCl was prepared by the reduction of VCl₄ with stoichiometric amounts of BuLi. This type of catalyst induces stereospecific polymerization of isobutyl vinyl ether without the action of trialkyl aluminum to an isotactic polymer when a rise in temperature during the polymerization was depressed by cooling. It is suggested that the cause of the stereospecific polymerization might be due to the catalyst structure in which LiCl coexists with VCl₃, namely, VCl₃ ? LiCl or VCl₂ ? 2LiCl as a solid solution in the crystalline lattice, since VCl₃ prepared by thermal decomposition of VCl₄ and a commercial VCl₃ did not produce the crystalline polymer and soluble catalysts such as VCl₄ in heptane and VCl₃ ? LiCl in ether solution did not yield the stereospecific polymer. It was found that some additives, such as tetrahydrofuran or ethylene glycol diphenyl ether, to the catalyst increased the stereospecific polymerization activity of the catalysts. Influence of the polymerization conditions such as temperature, time, monomer and catalyst concentrations, and the kind of solvent on the formed polymer was also examined.