Direct oxidative C(sp3)─H/C(sp2)─H coupling reaction using recyclable Sr-doped LaCoO3 perovskite catalyst

A strontium-doped lanthanum cobaltite perovskite, La_0.6Sr_0.4CoO₃, was prepared and utilized as a recyclable heterogeneous catalyst for the direct oxidative C(sp³)─H/C(sp²)─H coupling reaction between cyclic ethers and alkenes or coumarins to achieve corresponding α-functionalized ethers. The α-functionalization of cyclic thioethers or amides with alkenes or coumarins was also achieved via this protocol. The La_0.6Sr_0.4CoO₃ catalyst exhibited better performance than a variety of homogeneous and heterogeneous catalysts. Utilizing a recyclable catalyst would offer a greener option for the direct oxidative C(sp³)─H/C(sp²)─H coupling reaction. To our best knowledge, the C(sp³)─H/C(sp²)─H coupling between olefins and ethers to generate α-functionalized ethers using a heterogeneous catalyst has not been previously reported, and the α-functionalization of cyclic thioethers or amides with alkenes or coumarins is new.     

Kinetic study of methoxycarbonylation of 1,6‐hexanediamine with dimethyl carbonate using Mn(OAc)2 catalyst

Clean synthesis of dimethylhexane‐1,6‐dicarbamate (HDC) from methoxycarbonylation of 1,6‐hexanediamine (HDA) with dimethyl carbonate (DMC) was studied. Among several heterogeneous and homogeneous catalysts, Mn(OAc)₂ was screened as the most effective catalyst over which the kinetic balance could be reached within 2–3 h. Then the kinetic model of the methoxycarbonylation of HDA with DMC using Mn(OAc)₂ catalyst, under the real reaction conditions was established. Results indicated that the reaction orders were confirmed to be 4.5 for the first step reaction and 4.3 for the second step reaction by the numerical differential method. In addition, the activation energies for the first and second step reaction were 47.0514 and 60.4504 kJ·mol⁻¹ and the frequency factors were 1.4645 × 10² and 3.6519 × 10⁴ min⁻¹, respectively. Moreover, the kinetic model correlated well with experimental data. This study not only provides a highly efficient catalyst for the methoxycarbonylation of HDA with DMC but also gives the guidance for the design of the reactor by studying its kinetic under real reaction conditions.     

Spectral and chemical monitoring of cyclo-addition reaction of CO2 with poly(MMA-co-GMA) copolymers

This paper deals with the monitoring cyclo-addition of CO₂ to methyl methacrylate（MMA）-glycidyl methacrylate （GMA） copolymers using spectral（¹H-NMR and FTIR） and chemical（elemental analysis and titration） methods.Thus, poly（MMA-co-GMA）,was first prepared via solution polymerization.The copolymer was then treated with CO₂ gas flow in the presence of cetyltrimethyl ammoniumbromide as a catalyst.In terms of the carbonation reaction time,the terpolymer poly（MMA-co-GMA-co-2-oxo-l,3-dioxolane-4-yl-methyl methacrylate） was prepared in various yield of CO₂ fixation （>90%）.The peak intensity changes in the ¹H-NMR and FTIR spectra provided excellent demonstrative techniques to monitor the carbonation reaction progression.In a comparative analytical viewpoint,the NMR and elemental analysis were recognized to be the most accurate ways to follow the cyclo-addition reaction progression.However,titration was recognized to be the most preferred method,because it is a very inexpensive,facile and available method with a reasonable costaccuracy balance.     

Catecholase biomimetic catalytic activity of copper(II) complexes with 2-methyl-3-amino-(3H)-quinazolin-4-one

The oxidation of catechol by molecular oxygen in the presence of a catalytic amount of copper(II) complex with 2-methyl-3-amino-(3H)quinazoline-4-one (MAQ) and various anions (Cl⁻, Br⁻, ClO ₄ ⁻ , SCN⁻, NO ₃ ⁻ and SO ₄ ^– ) was studied. The catecholase biomimetic catalytic activity of the copper(II) complexes has been determined spectrophotometrically by monitoring the oxidative transformation of catechol to the corresponding light absorbing o-quinone (Q). The rate of the catalytic oxidation reaction was investigated and correlated with the catalyst structure, time, concentration of catalyst and substrate and finally solvent effects. Addition of pyridine or Et₃N showed a dramatic effect on the rate of oxidation reaction. Kinetic investigations demonstrate that the rate of oxidation reaction has a first order dependence with respect to the catalyst and catechol concentration and obeying Michaelis–Menten Kinetics. It was shown that the catalytic activity depends on the coordination environment of the catalyst created by the nature of counter anions bound to copper(II) ion in the complex molecule and follows the order: Cl⁻ > NO ₃ ⁻ > Br⁻ > SO ₄ ^– > SCN⁻ > ClO ₄ ⁻ . To further elucidate the catalytic activity of the complexes, their electrochemical properties were investigated and the catecholase mimetic activity has been correlated with the redox potential of the Cu²⁺/Cu⁺ couple in the complexes.     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov–Zhabotinsky reaction with ethyl hydrogen malonate

In a stirred batch reaction, Fe(phen)₃²⁺ ion behaves differently from Ce(III) or Mn(II) ion in catalyzing the bromate‐driven oscillating reaction with ethyl hydrogen malonate [CH₂COOHCOOEt, ethyl hydrogen malonate (EHM)]. The effects of N₂ atmosphere, concentrations of bromate ion, EHM, metal ion catalyst, sulfuric acid, and additive (bromide ion or bromomalonic acid) on the pattern of oscillations were investigated. The kinetic study of the reaction of EHM with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion indicates that under aerobic or anaerobic conditions the order of reactivity toward reacting with EHM is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺, which follows the same trend as that of the malonic acid system. The presence of the ester group in EHM lowers the reactivity of the two methylene hydrogen atoms toward bromination or oxidation by Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion. No good oscillations were observed for the BrO₃₋‐CH₂(COOEt)₂ reaction catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion. A discussion of the effects of oxygen on the reactions of malonic acid and its derivatives (RCHCOOHCOOR′) with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is also presented. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 52–61, 2000     

The oxalic acid catalysed oxidation of bis(2,4,6-tripyridyl-1,3,5-triazine)-iron(II) by chromium(VI) in acetate buffer

Summary The reaction between bis(2,4,6-tripyridyl-1,3,5-triazine)-iron(II), Fe(TPTZ) _inf2 ^sup2+ and chromium(VI) in acetate buffers is very slow. However, in the presence of oxalic acid (catalyst) it is very fast and is completed within 10s. The reaction was studied in the 3.6–5.6 pH range using stopped-flow spectrophotometry. The reaction is first order in the substrate and zero order in the oxidant. The rate of the reaction increases with the increase in pH. Kinetic evidence for complexation between the substrate and the catalyst was obtained and a mechanism involving the formation of an ion-pair between Fe(TPTZ) _inf2 ^sup2+ and the oxalate ion is proposed.     

Fast Oxygen Reduction Catalyzed by a Copper(II) Tris(2‐pyridylmethyl)amine Complex through a Stepwise Mechanism

Catalytic pathways for the reduction of dioxygen can either lead to the formation of water or peroxide as the reaction product. We demonstrate that the electrocatalytic reduction of O₂ by the pyridylalkylamine copper complex [Cu(tmpa)(L)]²⁺ in a neutral aqueous solution follows a stepwise 4 e^?/4 H⁺ pathway, in which H₂O₂ is formed as a detectable intermediate and subsequently reduced to H₂O in two separate catalytic reactions. These homogeneous catalytic reactions are shown to be first order in catalyst. Coordination of O₂ to Cu^I was found to be the rate‐determining step in the formation of the peroxide intermediate. Furthermore, electrochemical studies of the reaction kinetics revealed a high turnover frequency of 1.5×10⁵ s^?1, the highest reported for any molecular copper catalyst.     

Photoinduced Energy Transfer from Poly(N‐vinylcarbazole) to Tricarbonylchloro‐(2,2′‐bipyridyl)rhenium(I)

This work investigates the photoinduced energy transfer from poly(N‐vinylcarbazole) (PVK), as a donor material, to fac‐(2,2′‐bipyridyl)Re(CO)₃Cl, as a catalyst acceptor, for its potential application towards CO₂ reduction. Photoluminescence quenching experiments reveal dynamic quenching through resonance energy transfer in solid donor/acceptor mixtures and in solid/liquid systems. The bimolecular reaction rate constant at solution–film interfaces for the elementary reaction of the excited state with the quencher material could be determined as 8.8(±1.4)×10¹¹ L mol^?1 s^?1 by using Stern–Volmer analysis. This work shows that PVK is an effective and cheap absorber material that can act efficiently as a redox photosensitizer in combination with fac‐(2,2′‐bipyridyl)Re(CO)₃Cl as a catalyst acceptor, which might lead to possible applications in photocatalytic CO₂ reduction.     

Novel ruthenium(ii) and (iii) carborane complexes with diphosphine ligands and their application in radical polymerization

Ruthenium(ii) and (iii) carborane complexes containing XantPhos as a ligand were synthesized for the first time. It was shown that the reaction of the known complex exo-5,6,10-[Cl(Ph₃P)₂Ru]-5,6,10-(µ-H)₃-10-H-nido-7,8-C₂B₉H₈ with a 10% molar excess of XantPhos in benzene at 80 °C leads to a new closo-ruthenacarborane 3-Cl-3,3-[x²-XantPhos]-closo-3,1,2-RuC₂B9H₁₁, which can be easily converted to the corresponding acetonitrile complex 3-CH₃CN-3,3-[x²-XantPhos]-closo-3,1,2-RuC₂B₉H₁₁ by the reaction with isopropylamine in a dichloromethane—acetonitrile solvent mixture at 40 °C. These compounds, as well as previously synthesized ruthenium(ii) carborane complexes, were used as a basis for new catalyst systems allowing to conduct controlled radical polymerization at high rates even at low catalyst loading. The specific features of methyl methacrylate polymerization under the action of the indicated catalyst systems were considered and the mechanism of the process was investigated.

     

New binuclear Pd(II) thioamide complexes for the Heck reaction of aryl bromides

The reaction of binucleating thioamide ligands (L₁-L₃) with [PdCl₂(PPh₃)₂] in 1:2 molar ratio in methanol medium afforded a series of binuclear palladium(II) complexes. The synthesized complexes were characterized by elemental analysis and ¹H NMR. The molecular structure of one of the complexes was established by X-ray diffraction method. The binuclear palladium(II) thioamide complex has been shown to be an active catalyst for the Heck reaction of aryl bromides with alkenes.     

One-Pot Synthesis of Heterobimetallic Metal–Organic Frameworks (MOFs) for Multifunctional Catalysis

A one-pot synthesis of bimetallic metal–organic frameworks (Co/Fe-MOFs) was achieved by treating stoichiometric amounts of Fe and Co salts with 2-aminoterephthalic acid (NH₂-BDC). Monometallic Fe (catalyst A) and Co (catalyst F) were also prepared along with mixed-metal Fe/Co catalysts (B–E) by changing the Fe/Co ratio. For mixed-metal catalysts (B–E) SEM energy-dispersive X-ray (EDX) analysis confirmed the incorporation of both Fe and Co in the catalysts. However, a spindle-shaped morphology, typically known for the Fe-MIL-88B structure and confirmed by PXRD analysis, was only observed for catalysts A–D. To test the catalytic potential of mixed-metal MOFs, reduction of nitroarenes was selected as a benchmark reaction. Incorporation of Co enhanced the activity of the catalysts compared with the parent NH₂-BDC-Fe catalyst. These MOFs were also tested as electrocatalysts for the oxygen evolution reaction (OER) and the best activity was exhibited by mixed-metal Fe/Co-MOF (Fe/Co batch ratio=1). The catalyst provided a current density of 10 mA cm⁻² at 410 mV overpotential, which is comparable to the benchmark OER catalyst (i.e., RuO₂). Moreover, it showed long-term stability in 1 m KOH. In a third catalytic test, dehydrogenation of sodium borohydride showed high activity (turnover frequency=87 min⁻¹) and hydrogen generation rate (67 L min⁻¹ g⁻¹ catalyst). This is the first example of the synthesis of bimetallic MOFs as multifunctional catalysts particularly for catalytic reduction of nitroarenes and dehydrogenation reactions.     

Layered double hydroxides (LDHs): As efficient heterogeneous catalyst for the cyanosilylation of aromatic aldehydes

We report the first application of Layered Double Hydroxides (LDHs) as efficient and novel heterogeneous catalyst for the cyanosilylation of aldehydes with excellent yields and simple work up. The reaction between different aldehydes with electron-withdrawing and releasing groups and trimethylsilyl cyanide (TMSCN) proceeds in dry CH₂Cl₂ at room temperature in the presence of Mg-Al-Cu LDH. The catalyst recycled and reused for four times without loss of catalytic activity. The structures of all compounds were corroborated spectroscopically (¹H- and ¹³C-NMR, and elemental analysis). A plausible mechanism for this type of reaction is proposed.     

A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999     

Synthesis of micronized CaO assisted by NH4HCO3 with Ca(OH)2 and its application in heterogeneously catalyzing transesterification reaction for producing biodiesel

Micronized CaO with pores was synthesized by calcining the reaction product CaCO₃ from NH₄HCO₃ and Ca(OH)₂. Scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, X‐ray fluorescence, Fourier transform infrared spectroscopy, and Brunauer–Emmett–Teller analysis were used to characterize CaO, which confirmed that after calcining at 800°C for 2 hr, CaCO₃ was completely converted into porous micronized CaO with a surface area of about 7.295 m²/g and a particle size of 0.5–1.5 μm. The porous CaO microparticles were used as heterogeneous catalysts for producing biodiesel from transesterification of soybean oil and methanol. The influences of reaction time, calcined temperature, and reusability of CaO were explored. The experiments showed that CaO has high catalytic activity for transesterification reaction, and the yield of biodiesel reaches more than 98% under the conditions of methanol/oil mole ratio of 9, and the catalyst amount (catalyst/oil) of 3% after reaction for 2.5 hr. The CaO catalyst can be recycled easily and it also has the advantage of low pollution. Simple synthetic route, low cost, high catalytic activity, good reusability, and great potential for industrialization are the advantages of the porous micronized CaO catalyst that was proposed in this work.     

Kinetic Study of the Ce(III)‐, Mn(II)‐, or Ferroin‐Catalyzed Belousov‐Zhabotinsky Reaction with Allylmalonic Acid

In a stirred batch experiment and under aerobic conditions, ferroin (Fe(phen)₃²⁺) behaves differently from Ce(III) or Mn(II) ion as a catalyst for the Belousov‐Zhabotinsky (BZ) reaction with allylmalonic acid (AMA). The effects of bromate ion, AMA, metal‐ion catalyst, and sulfuric acid on the oscillating pattern were investigated. The kinetics of the reaction of AMA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was studied under aerobic or anaerobic conditions. The order of reactivity of metal ions toward reaction with AMA is Fe(phen)₃³⁺ > Mn(III) > Ce(IV) under aerobic conditions whereas it is Mn(III) > Ce(IV) > Fe(phen)₃³⁺ under anaerobic conditions. Under aerobic or anaerobic conditions, the order of reactivity of RCH(CO₂H)₂ (R = H (MA), Me (MeMA), Et (EtMA), allyl (AMA), n‐Bu (BuMA), Ph (PhMA), and Br (BrMA)) is PhMA > MA > BrMA > AMA > MeMA > EtMA > BuMA toward reaction with Ce(IV) ion and it is MA > PhMA > BrMA > MeMA > AMA > EtMA > BuMA toward reaction with Mn(III) ion. Under aerobic conditions, the order of reactivity of RCH(CO₂H)₂ toward reaction with Fe(phen)₃³⁺ ion is PhMA > BrMA > (MeMA, AMA) > (BuMA, EtMA) > MA. The experiment results are rationalized.     

Manganese(II), cobalts(II) and nickel(II) complexes of tris(2-pyridyl)phosphine and their catalytic activity toward oxidation of tetralin

Abstract  

Monomeric Mn²⁺, Co²⁺ and Ni²⁺ complexes of tris(2-pyridyl)phosphine (P(2-py)₃ were synthesized through the reaction of the hydrated metal(II) chlorides with P(2-py)₃ in near-quantitative yields. The solid-state structure of the Mn complex was determined by single-crystal X-ray diffraction. All three complexes were tested as homogeneous catalysts for the oxidation of tetralin to α-tetralone with tert-butyl hydroperoxide (TBHP) as oxidant. The influences of temperature, solvent, catalyst molar ratio and time of the reaction on the catalyzed reactions were investigated.     

Polymerization kinetics of octene-1 catalyzed by metallocene methylaluminoxane investigated with attenuated total reflectance fourier transform infrared (ATR-FT-IR) spectroscopy

The kinetic parameters have been measured for octene-1 solution polymerization at 120°C catalyzed by zirconocene with the cocatalyst methylaluminoxane. The polymerizations were performed in an attenuated total reflectance (ATR) reaction cell. The progress of the reactions were followed by observing the disappearance of octene-1 using the 910 cm^?1 band measured by FT-IR spectroscopy. The dependence of the reaction rate, R_p, on catalyst concentration and cocatalyst/catalyst ratio was examined. The catalyst deactivation mechanism was studied by fitting the experimental data to mathematical models involving second-order propagation and either first or second order catalyst deactivation. Second-order catalyst deactivation provided a much better fit. The calculated deactivation rate constant, k_d, is 21 (Ms)^?1. This model is used to determine the propagation rate constant for Al/Zr = 4 × 10³ as k_p = 19.9 (M s)^?1. A decrease in Al/Zr = 3 × 10² lowered the propagation rate constant, k_p, to 9.6 (M s)^?1 indicating that less than 50% of the initial Zr is active at this Al/Zr ratio.     

Selective and efficient oxidation of ethylene to ethylene glycol acetates with H2O2 catalyzed by Pd(OAc)2-di(2-pyridyl)ketone-di(2-pyridyl)methanesulfonate system

Novel systems for palladium-catalyzed selective oxidation of ethylene to a mixture of ethylene glycol mono- and di-acetates as the major reaction products (90-95% selectivity) with H₂O₂ in acetic acid solution at ambient pressure and 20 °C were developed. The catalytic reaction is very efficient with up to 90% combined yield of glycol acetates with H₂O₂ as a limiting reagent and 1 mol% catalyst loading. The catalytic systems developed are comprised of a mixture of Pd(OAc)₂, and 6-methyl substituted (2-pyridyl)methanesulfonate and/or di(6-pyridyl)ketone ligands. Compositions of the binary, Pd(OAc)₂-dpk, Pd(OAc)₂-Me-dpms, and ternary, Pd(OAc)₂-dpk-Me-dpms, systems have been studied by means of ¹H NMR spectroscopy and ESI mass spectrometry. Kinetics studies were performed as well and plausible reaction mechanism was suggested, which features facially chelating ligand-enabled facile oxidation of Pd^IIC₂H₄OAc intermediates with H₂O₂ to form Pd^IVC₂H₄OAc transients.     

Highly enantioselective hetero-Diels-Alder reaction between trans-1-methoxy-2-methyl-3-trimethylsiloxybuta-1,3-diene and aldehydes catalyzed by (R)-BINOL-Ti(IV) complex

An efficient enantioselective approach to 2,5-disubstituted dihydropyrones was developed. Some easily accessible inexpensive diol ligand metal complexes were employed, and [(R)-BINOL]₂-Ti(OiPr)₄ complex was found to be the most effective catalyst (up to 99% yield and 99% ee in the presence of 5 mol% catalyst) for the hetero-Diels-Alder reaction between trans-1-methoxy-2-methyl-3-trimethylsiloxybuta-1,3-diene (1) and aldehydes. The potential and generality of this catalyst were evaluated by a variety of aldehydes including aromatic, heteroaromatic, α,β-unsaturated and aliphatic aldehydes. Based on the isolated intermediate from the reaction of benzaldehyde being confirmed by ¹H, ¹³C NMR and HRMS data, the mechanism was proposed as a Mukaiyama aldol pathway.     

Hydrosilylation reactions catalysed by decacarbonyldimanganese(O)

Decacarbonyldimanganese(O) complex, Mn₂(CO)₁₀, has been evaluated as a catalyst for hydrosilylation reactions of 1-hexene with tertiary silanes, Et₃SiH and (EtO)₃SiH. The reaction of Et₃SiH appears to be first order with respect to the catalyst, to the hexene and to the silane, although catalyst deactivation occurs when relatively high silane concentrations are used. The reaction rate is slightly affected by varying the type of the silane used. The rate of disappearance of the tertiary silane is consistent with that of the 1-hexene, which means that the catalyst is selective to hydrosilylation reactions. This was confirmed by following the rates of disappearance of Si-H and CC IR bands at 2210, 2100 and 1650 cm⁻¹ for (EtO)₃SiH, Et₃SiH and 1-hexene respectively. A comparison of the behaviour of Mn₂(CO)₁₀ with that of Co₂(CO)₈ is reported here, together with a suggested mechanism for the manganese catalyst.