Adducts of aqua complexes of Ln3+ with a symmetrical octamethyl-substituted cucurbituril: potential applications for isolation of heavier lanthanides

Interaction of a series of lanthanide cations (Ln³⁺) with a symmetrical octamethyl-substituted cucurbituril (OMeQ[6]) has been investigated. X-ray single-crystal diffraction analysis has revealed that the interaction results in the formation of adducts of OMeQ[6] with aqua complexes of lanthanide cations ([Ln(H₂O)₈]³⁺), Ln = Eu, Gd, Tb, Dy, Ho, Er, Tm and Yb in OMeQ[6]–Ln(NO₃)₃–H₂O systems. However, no solid crystals were obtained from systems containing La, Ce, Pr, Nd and Sm. X-ray diffraction analysis has revealed that although the solid adducts fall into two isomorphous groups, there are no significant differences in the interactions between OMeQ[6] and [Ln(H₂O)₈]³⁺ complexes and in the corresponding supramolecular assemblies. Thermodynamic parameters for the interaction between OMeQ[6] and [Ln(H₂O)₈]³⁺ complexes based on isothermal titration calorimetry experiments show two periods corresponding to the above two systems, with the lighter lanthanide cations preferring to remain in solution and the heavier lanthanide cations forming crystalline solids. Electron spectroscopy has shown that interaction of OMeQ[6] with lanthanide cations could provide a means of isolating heavier lanthanide cations from their lighter counterparts.     

Preparation of glycoluril monomers for expanded cucurbit[n]uril synthesis

Glycoluril derivatives bearing free ureidyl groups (1) and bis(cyclic ethers) (2) are the fundamental building blocks for the synthesis of cucurbituril, its derivatives, and its congeners. The known derivatives of 1 and 2 fall into two main classes—those bearing alkyl or aryl functional groups on their convex face. In this paper we present a third class of glycolurils, namely those bearing substituents that are electron withdrawing in character. This class of compounds carries carboxylic acid derived functional groups on their convex face and are derived from diesters 1e and 2e. An improved synthesis of 1e and 2e is reported and their modification described. For example, 1e and 2e are converted into secondary amides (10-15) by heating in solutions of the neat primary amines. The secondary amides can be transformed into imides (19-22, 24, 25) by heating with PTSA in ClCH₂CH₂Cl. The isolation of these compounds in pure form in high yields is accomplished by simple and scalable washing or recrystallization procedures. We also present the X-ray crystallographic characterization of bis(cyclic ethers) 2e, 8, and 22. We anticipate that the ready availability of ester, carboxylate, acid, secondary amide, imide, and tertiary amide derivatives of 1 and 2 will expand the scope of the synthesis of cucurbituril derivatives by providing a new class of building blocks with electron withdrawing substituents.     

1,6-Dibenzylglycoluril for synthesis of deprotected glycoluril dimer

1,6-Dibenzylglycoluril is not accessible via classical condensation reaction between substituted urea and glyoxal. In this paper 1,6-dibenzylglycoluril was successfully prepared by alkylation of 1,6-diacetylglycoluril with benzylbromide for the first time. 1,6-Dibenzylglycoluril reacted with formaldehyde to give tetrabenzylglycoluril dimer. Deprotection of this dimer and the previously reported o-xylyleneglycoluril dimer was achieved by dissolving metal reduction, whereas propyleneglycoluril dimer was deprotected by action of potassium persulfate.     

Synthesis and X-ray Crystal Structure of a Methylene-bridged Glycoluril Dimer

The synthesis and X-ray crystal structure of a methylene-bridged glycoluril dimer 2 was reported.The methylene-bridged glycoluril dimer 2(C38H36Br4N8O12,Mr=1116.35) crystallizes in space group P1 with a=10.5802(6),b=16.8469(9),c=24.7673(14) ,α=98.00,β=96.263(1),γ=101.606(1)o,V=4239.3(4)3,Z=4,Dc=1.749 g/cm3,μ=3.869 mm-1 and F(000)=2224.It crystallizes in an S-shaped conformation that displays two ethoxycarbonyl groups on each face of the molecule.     

1，4二环己基取代六元瓜环与Na(Ⅰ)自组装实体的合成与晶体结构

A novel complex of a new 1,4-dicyclohexyl cucurbituril(DCYQ[6]) with sodium(Ⅰ) ion was synthesized, and the crystal structure was determined by X-ray diffraction technique. In this self-assembled entity both the cavity interaction of DCYQ[6] included a nitrate anion and the portal interaction of the dipole carbonyls of DCYQ[6] with sodium cations lead to form self assembled molecular capsules. The crystal structure of the entity shows a packing of the self assembled molecular capsules connected by hydrogen bonds of water molecules. CCDC: 271400.     

溴甲基取代甘脲二醚的合成与晶体结构表征

以溴代丁二酮为原料,分别从加料方式、酸度、原料摩尔比等方面优化了溴甲基取代甘脲的合成工艺。在溴代丁二酮与尿素的摩尔比为1∶5、加入水-乙醇混合溶剂、搅拌24h后加入溶剂体积2.5%的三氟乙酸、反应48h条件下,产率达60.8%。相对文献[10],本法产率提高了20%~30%。并利用溴甲基取代甘脲与多聚甲醛在氢溴酸-冰乙酸体系下75℃恒温反应1h,得溴甲基取代甘脲二醚,产率达65.5%。在利用核磁共振技术对化合物的结构及性能进行检测和表征的同时,使用X射线单晶衍射技术确定了其中两个化合物的晶体结构。     

Synthesis, structural characterization, and fluorescent chemosensory properties of novel molecular clips based on diethoxycarbonyl glycoluril

A pair of novel fluorescent molecular clips was synthesized from diethoxycarbonal glycoluril cyclic ether and 1,2-dihydro-indazol-3-one. Their structures and conformations were confirmed by single crystal X-ray diffraction and chemosensory properties were studied by fluorescent spectroscope. Both of them exhibited selective recognition toward Fe³⁺ over other metal ions examined in DMF/CH₃OH (50:1, v/v).     

Synthesis and crystal structure of supramolecular adduct of tetranuclear uranyl chloride aquacomplex with macrocyclic cavitand cucurbituril

Crystals of supramolecular compound {[(UO₂)₄O₂Cl₄(H₂O)₆](H₂OC₃₆H₃₆N₂₄O₁₂)}·4H₂O were obtained under conditions of hydrothermal synthesis from solutions of uranyl(vi) nitrate and cucurbituril in the presence of rubidium chloride. The crystal and molecular structure were determined by X-ray diffraction analysis.     

Synthesis and crystal structures of supramolecular adducts of molybdenum and tungsten selenide aqua complexes with macrocyclic cavitand cucurbituril

The supramolecular compounds {[W₃Se₄Cl₃(H₂O)₆]₂[PyHC₃₆H₃₆N₂₄O₁₂]}Cl₃·18H₂O (1) and {[Cl₃SnMo₃Se₄Cl₃(H₂O)₆][Cl₃SnMo₃Se₄Cl₂(H₂O)₇](C₃₆H₃₆N₂₄O₁₂)}Cl·26H₂O (2) were isolated from solutions of the selenium-containing tungsten and molybdenum clusters [W₃Se₄(H₂O)₉]⁴⁺ and [Cl₃SnMo₃Se₄(H₂O)₉]³⁺, respectively, and organic cavitand cucurbituril. X-ray diffraction analysis demonstrated that the macrocylcic cucurbituril molecule is coordinated on both sides by the cluster cations through the formation of complementary hydrogen bonds. Compound 1 has a chain structure stabilized by Se...Se interactions between the adjacent cluster cores. In compound 2, the bridging ₂-selenium atoms of the cluster fragment Mo₃Se₄ are coordinated to the tin atom of the SnCl₃ ^– ligand, thus losing the ability to be involved in Se...Se interactions.     

葫芦脲：分子识别与组装

综述了葫芦脲这一类合成受体的最新研究进展，包括葫芦脲的分子设计与合成 ，离子和分子识别，键合的热力学性质，分子组装及其功能的最新研究概况。     

Dimethacrylate derivatives of dimer acid

Dimethacrylate monomers are used in a wide variety of crosslinked polymer applications, including adhesives, coatings, dental restoratives, and stereolithography. The advantages of rapid curing and good mechanical properties offered by these materials are countered by problems with dimensional changes during polymerization and long‐term physical instability resulting from water sorption and loss of residual unreacted monomer. In this work, several examples of hydrophobic monomers based on a dimer acid structure were synthesized, and their monomeric and homopolymer properties were evaluated. The photopolymerization reactivity and conversion were investigated with near‐infrared spectroscopy. Studies of the volumetric shrinkage, water sorption, and water contact angle and three‐point‐bend testing of the homopolymers were also carried out, with the results compared with those of commonly used dimethacrylate monomers. The new monomers produced higher degrees of conversion combined with lower polymerization shrinkage and water sorption values in comparison with conventional monomers. The relatively low crosslink density of dimethacrylates constructed from dimer acid produced polymers with high flexibility and low modulus, as expected; however, changes in the functionality of the group linking the dimer acid core with the methacrylate end groups induced significant property differences. On the basis of the properties demonstrated by the dimer acid monomers and their homopolymers, these new materials appear well suited for applications such as coatings and adhesives. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3921–3929, 2006     

Computational study on the interactions of mustard gas with cucurbituril macrocycles

The study on the absorption of toxic gases such as mustard gas by organic host is essential to the development of inexpensive detection and decontamination equipments. Using quantum chemical methods, we propose cucurbituril as an effective host to capture mustard gas. It was found that stable complexes are formed with the inclusion of the toxic gas molecules inside the cucurbituril cavity, compared with the lateral and exterior interactions. Oxygen mustard has a comparable binding energy with sulfur mustard and hence can be used during experimental investigation. Additionally, during the inclusion complex formation, the presence of heteroatoms helps the guest molecules to undergo a larger structural reorganization to get accommodated inside the cucurbituril macromolecule. Atoms‐in‐molecules analysis shows the existence of strong intermolecular CH…O bonding between the guest molecules and cucurbituril macromolecule. The presence of an intramolecular CH…Cl type of bonding accounts for the higher stabilization of sulfur mustard inside the cucurbituril macromolecule. © 2015 Wiley Periodicals, Inc.     

Supramolecular compounds of cucurbituril with molybdenum and tungsten chalcogenide cluster aqua complexes

The review surveys the synthesis and structures of a new class of supramolecular compounds composed of the macrocyclic cavitand cucurbituril and molybdenum or tungsten chalcogenide clusters. The structural motifs of supramolecular compounds and factors influencing their formation are considered.     

Total synthesis of (+)-varitriol via a symmetrical furanose diol as the key intermediate

Alternative, simple and efficient route for (+)-varitriol (1), a marine-derived natural product with potent biological activity, has been synthesized from d-ribose. In this synthetic strategy symmetrical diol (6) with mono alcohol protection, the key intermediate, was produced in eight steps with 35% overall yield and the significance of 6 as the key furanoside building block for the synthesis of novel analogues of 1 for SAR studies was explained.     

Synthesis of symmetrical 1,3-diynes via homocoupling reaction of n-butyl alkynyltellurides

An ultrasound-assisted synthesis of symmetrical 1,3-diyne compounds with electron-withdrawing or -donating substituents is described and illustrated by the palladium-catalyzed homocoupling reaction of n-butyl alkynyltellurides. This procedure offers easy access to 1,3-diynes in very short reaction times, and the products are achieved in good to excellent yields.     

Synthesis and photochromic reactivity of a diarylethene dimer linked by a phenyl group

A diarylethene dimer linked by a phenyl group was synthesized and the photochromic behavior was examined. Upon irradiation with ultraviolet light (λ=313 nm), a hexane solution of the diarylethene dimer (1a) turned purple blue. Upon further prolonged irradiation the color changed to blue. The purple-blue and blue colors are due to the formation of a dimer having one open- and one closed-ring forms (1b) and a dimer having two closed-ring forms (1c), respectively. Both 1b and 1c returned to 1a by irradiation with visible light (λ>500 nm). The photochromic reactivity was evaluated by measuring quantum yields of the photocyclization and photocycloreversion reactions. The photocyclization quantum yield was 0.50. The cycloreversion quantum yield from 1c to 1b (0.0026) was lower than that from 1b to 1a (0.0094).     

利用卟啉中位羧基基团直接缩合卟啉二聚体

卟啉单体的直接偶合法. 这种方法包括有β-β, meso-β直接连接的二聚体[8,9]和直接连接的N混杂的卟啉二聚体[10]. 我们利用二环己烷基羰化二亚胺(DCC)作催化剂, 在冰盐浴条件下, 通过两个5-(p-羧基苯基)-10,15,20-三苯基卟啉(H2CPTPP)周边上的羧酸基团一步直接缩合获得以羧酸酐连接的新型卟啉二聚体. 利用多种光谱手段证实所合成的物质为目标产物. 该方法具有反应物单一、 反应步骤简单、 副反应少、 产物纯化方便、 时间短和产率高等优点.     

Synthesis and reversible photocleavage of novel polyurethanes containing coumarin dimer components

Six polyurethanes containing coumarin dimer components in the main chain have been prepared by polyaddition of diisocyanates with anti head-to-head 7-hydroxycoumarin dimer or anti head-to-tail 7-hydroxy-4-methylcoumarin dimer. 7-Acetoxycoumarin and 7-acetoxy-4-methylcoumarin were first prepared and then photodimerized under 350 nm UV light to give anti head-to-head 7-acetoxycoumarin dimer and anti head-to-tail 7-acetoxy-4-methylcoumarin dimer, respectively. After hydrolyzing under acidic conditions to 7-hydroxycoumarin dimer and anti head-to-head 7-hydroxycoumarin dimer, they were polymerized with aliphatic and aromatic diisocyanates in N,N-dimethylacetamide to give the polyurethanes. Addition of dibutyltin dilaurate (T-12) as catalyst increases the polymer yield with the viscosity remaining almost unchanged. It was also found that lithium chloride enhances both the yield and viscosity of the polyurethanes by increasing their solubility possibly through complexation. The polyurethanes are symmetrically photocleaved at cyclobutane rings under 254 nm UV light to dicoumarins. Reversible photodimerization of the photocleaved compounds have also been investigated under 300 and 350 nm UV light. The polyurethanes from aromatic diisocyanates or with 4-methyl substituent exhibit greater reactivity in the photocleavage reaction. © 1997 John Wiley & Sons, Inc.