Molecular solvent effect on the acidity constant of protic ionic liquids

In this work how the microscopic properties of a molecular solvent affect the chemical environment of the protic ionic liquids (PILs) was analyzed. Using Reichardt’s dye as indicator of acidity, new acidity constant values for eight PILs (pK_a^PILs) were determined by spectrophotometric titration. Modifying the character hydrogen bonding donor of the molecular solvent it is possible to handle the PIL acid strength. Thus, we can turn basic PILs into acidic ones thereby the molecular solvent could be used as ‘additive’ for PILs, which allowed us to tune PILs design.     

Investigation of the proton mobility in CsH(SO4)0.76(SeO4)0.24 crystal by H NMR spectroscopy

Crystals of CsH(SO₄)_0.76(SeO₄)_0.24 formulation were studied by ¹H NMR spectroscopy. The ¹H line-shape, the T₁ and T₂ relaxation times were determined as a function of temperature. The activation energies deduced from the temperature dependence of relaxation times were compared with the activation energy issued from conductivity measurements. The results obtained are discussed and supported by the Ngai model.     

Fast high-throughput method for the determination of acidity constants by capillary electrophoresis. II. Acidic internal standards

A fast method for the determination of acidity constants by CZE has been recently developed. This method is based on the use of an internal standard of pK(a) similar to that of the analyte. In this paper we establish the reference pK(a) values of a set of 24 monoprotic neutral acids of varied structure that we propose as internal standards. These compounds cover the most usual working pH range in CZE and facilitate the selection of adequate internal standards for a given determination. The reference pK(a) values of the acids have been established by the own internal standard method, i.e. from the mobility differences between different acids of similar pK(a) in the same pH buffers. The determined pK(a) values have been contrasted to the literature pK(a) values and confirmed by determination of the pK(a) values of some acids of the set by the classical CE method. Some systematic deviations of mobilities have been observed in NaOH buffer in reference to the other used buffers, overcoming the use of NaOH in the classical CE method. However, the deviations affect in a similar degree to the test compounds and internal standards allowing thus, the use of NaOH buffer in the internal standard method. This fact demonstrates the better performance of the internal standard method over the classical method to correct mobility deviations, which together with its fastness makes it an interesting method for the routine determination of accurate pK(a) values of new pharmaceutical drugs and drug precursors.     

The first example of linear peptides containing a N-trifluoroethylated backbone amide linkage and the surprising solution dynamics observed by F NMR

The α-amino group of (l)phenylalanine methyl ester was trifluoroethylated using (2,2,2-trifluoroethyl)phenyliodonium N,N-bis(trifluoromethylsulfonyl)imide. A dipeptide Gly(l)Phe containing a trifluoroethylated peptide bond was synthesized by removing the α-amino proton of N^α-trifluoroethyl (l)phenylalanine methyl ester followed by coupling with N^α-phthaloyl glycine acid fluoride. The dipeptide was further coupled with (l)leucine methyl ester under conventional carboxyl activation conditions to provide two diastereomers of the tripeptide Gly(d,l)Phe(l)Leu. The solution dynamic behavior of the tripeptide was investigated as a function of solvents, by NOESY and variable temperature (VT) ¹⁹F NMR experiments.     

Fast high-throughput method for the determination of acidity constants by capillary electrophoresis: I. Monoprotic weak acids and bases

A new and fast method to determine acidity constants of monoprotic weak acids and bases by capillary zone electrophoresis based on the use of an internal standard (compound of similar nature and acidity constant as the analyte) has been developed. This method requires only two electrophoretic runs for the determination of an acidity constant: a first one at a pH where both analyte and internal standard are totally ionized, and a second one at another pH where both are partially ionized. Furthermore, the method is not pH dependent, so an accurate measure of the pH of the buffer solutions is not needed. The acidity constants of several phenols and amines have been measured using internal standards of known pK_a, obtaining a mean deviation of 0.05 pH units compared to the literature values.     

Cleavage of Menger’s aliphatic amide: A model for peptidase enzyme solely explained by proximity orientation in intramolecular proton transfer

Ab initio HF/6-31G and DFT B3LYP/6-31G (d,p) calculations for the cleavage of Menger’s aliphatic amide 3 (a peptidase model) under physiological conditions, indicate that the rate limiting step in the cleavage process is a proton transfer from one of the carboxyl groups onto the amidic carbonyl oxygen. The acceleration in rates is mainly due to proximity orientation, and the effect of pseudoallylic strain relief on the rates is negligible. Moreover, the calculations reveal that the mode and the mechanism of the amide cleavage are largely dependent on the pH of the reaction. These results explain the findings that peptidase enzymes are reactive around neutral pH while their activities vanish under basic medium.     

A fluorine scan of non-peptidic inhibitors of neprilysin: Fluorophobic and fluorophilic regions in an enzyme active site

This article describes the synthesis and in vitro biological affinities of (poly)fluorinated neprilysin inhibitors. Two series of inhibitors with F-substitution of the central benzimidazole platform of the ligands and the benzylic vector to fill the S1’ pocket of NEP were investigated. The S1’ pocket was found to be highly fluorophobic, and F-substitution led to significantly decreased binding affinities of inhibitors. This result is explained by electrostatically unfavorable close contacts of organic fluorine with the negatively polarized π-surfaces of surrounding aromatic amino acid side chains. In contrast, the protein environment around the benzimidazole platform, with three electropositive guanidinium side chains of Arg residues, was found to provide a fluorophilic environment. Overall, the data support that organic fluorine, with its high negative charge density prefers to orient into electropositive regions of receptor sites. pK_a measurements of fluorinated ligands provided several simple patterns for the prediction of pK_a values of benzimidazoles, important building blocks in medicinal chemistry.     

Determining the geometry of hydrogen bonds in solids with picometer accuracy by quantum-chemical calculations and NMR spectroscopy.

The structure of multiply hydrogen-bonded systems is determined with picometer accuracy by a combined solid-state NMR and quantum-chemical approach. On the experimental side, advanced 1H-15N dipolar recoupling NMR techniques are capable of providing proton-nitrogen distances of up to about 250 pm with an accuracy level of +/-1 pm for short distances (i.e., around 100 pm) and +/-5 pm for longer ones (i.e., 180 to 250 pm). The experiments were performed under fast magic-angle spinning, which ensures sufficient dipolar decoupling and spectral resolution of the 1H resonance lines. On the quantum-chemical side, the structures of the hydrogen-bonded systems were computationally optimised, yielding complete sets of nitrogen-proton and proton-proton distances, which are essential for correctly interpreting the experimental NMR data. In this way, nitrogen-proton distances were determined with picometer accuracy, so that vibrational averaging effects on dipole-dipole couplings need to be considered. The obtained structures were finally confirmed by the complete agreement of computed and experimental 'H and '5N chemical shifts. This demonstrates that solid-state NMR and quantum-chemical methods ideally complement each other and, in a combined manner, represent a powerful approach for reliable, high-precision structure determination whenever scattering techniques are inapplicable.     

Determination of furosemide in pharmaceutical formulations by diffuse reflectance spectroscopy

In this report an analytical method to determine furosemide by using diffuse reflectance spectroscopy is presented. This study shows that this technique can give quantitative results using spot test analysis, particularly in the case of pharmaceuticals containing furosemide. The color spot test could be obtained by reaction between furosemide with p-dimethylaminocinnamaldehyde, in acid medium. This reaction produced a stable complex on filter paper after heating to 80 °C for 5 min. All reflectance measurements were carried out at 585 nm and the linear range was from 7.56×10⁻³ to 6.05×10⁻² mol l⁻¹, with a correlation coefficient of 0.999. The limit of detection was estimated to be 2.49×10⁻³ mol l⁻¹ (R.S.D.=1.7%) and the effect of common excipients on the reflectance measurements was evaluated. The method was applied to determine furosemide in commercial brands of pharmaceuticals. The results obtained by the proposed method were favorably compared with those of the official method, showing for the first time ever that quantitative spot test analysis by diffuse reflectance could be successfully used to determine furosemide in tablets.     

Hydrolysis of the amide bond in N-acetylated l-methionylglycine catalyzed by various platinum(II) complexes under physiologically relevant conditions

The hydrolytic reactions between various Pt(II) complexes of the type [Pt(L)Cl₂] and [Pt(L)(CBDCA-O,O′] (L is ethylenediamine, en; (±)-trans-1,2-diaminocyclohexane, dach; (±)-1,2-propylenediamine, 1,2-pn and CBDCA is the 1,1-cyclobutanedicarboxylic anion) and the N-acetylated l-methionylglycine dipeptide (MeCOMet-Gly) were studied by ¹H NMR spectroscopy. All reactions were realized at 37 °C with equimolar amounts of the Pt(II) complex and the dipeptide at pH 7.40 in 50 mM phosphate buffer in D₂O. Under these experimental conditions, a very slow cleavage of the Met-Gly amide bond was observed and this hydrolytic reaction proceeds through the intermediate [Pt(L)(H₂O)(MeCOMet-Gly-S)]⁺ complex. In general, it can be concluded that faster hydrolytic cleavage of the MeCOMet-Gly dipeptide was observed in the reaction with the chloride complex than with corresponding CBDCA Pt(II) complexes. The steric effects of the Pt(II) complex on the hydrolytic cleavage of the amide bond in the MeCOMet-Gly dipeptide were also investigated by ¹H NMR spectroscopy. It was found that the rate of hydrolysis decreases as the steric bulk of the CBDCA and chlorido Pt(II) complexes increase (en > 1,2-pn > dach). These results contribute to a better understanding of the toxic side effects of Pt(II) antitumor drugs and should be taken into consideration when designing new potential Pt(II) antitumor drugs with preferably low toxic side effects.     

Determination of pKa values of some antihypertensive drugs by liquid chromatography and simultaneous assay of lercanidipine and enalapril in their binary mixtures

In this study, pK_a values were determined using the dependence of the retention factor on the pH of the mobile phase for three ionizable substances, namely, enalapril, lercanidipine and ramipril (IS). The effect of the mobile phase composition on the ionization constant was studied by measuring the pK_a at different methanol-water mixtures, ranging between 50 and 65% (v/v), using LC-DAD method. Two simple, accurate, precise and fully validated analytical methods for the simultaneous determination of enalapril and lercanidipine in combined dosage forms have been developed. Separation was performed on an X-Terra RP-18 column (250 mm × 4.60 mm ID × 5 μm) at 40 °C with the mobile phase of methanol-water 55:45 (v/v) adjusted to pH 2.7 with 15 mM orthophosphoric acid. Isocratic elution was performed in less than 12 min with a flow rate of 1.2 mL min⁻¹. Good sensitivity for the analytes was observed with DAD detection. The LC method allowed quantitation over the 0.50-20.00 μg mL⁻¹ range for enalapril and lercanidipine. The second method depends on first derivative of the ratio-spectra by measurements of the amplitudes at 219.7 nm for enalapril and 233.0 nm for lercanidipine. Calibration graphs were established for 1-20 μg mL⁻¹ for enalapril and 1-16 μg mL⁻¹ lercanidipine, using first derivative of the ratio spectrophotometric method. Both methods have been extensively validated. These methods allow a number of cost and time saving benefits. The described methods can be readily utilized for analysis of pharmaceutical formulations. The methods have been applied, without any interference from excipients, for the simultaneous determination of these compounds in tablets. There was no significant difference between the performance of the proposed methods regarding the mean values and standard deviations.     

Structures and Interligand Interaction Pattern of Phosphoramidite Pd Complexes by NMR Spectroscopy: Modulations in Extended Interaction Surfaces as Stereoselection Mode of a Privileged Class of Ligands

During the last decade, phosphoramidites have been established as a so‐called privileged class of ligands in various transition metal catalyses. However, the interactions responsible for their favorable properties have hitherto remained elusive. To address this issue, the formation trends, structural features, and interligand interaction patterns of several trans‐ and cis‐[PdLL′Cl₂] complexes have been investigated by NMR spectroscopy. The energetic contribution of their interligand interactions has been measured experimentally using the supramolecular balance for transition‐metal complexes. The resulting energetics combined with an analysis of the electrostatic potential surfaces reveal that in phosphoramidites not only the aryl groups but the complete (CH)CH₃Ph moieties of the amine side chains form extended quasi‐planar CH‐π and π‐π interaction surfaces. Application of the supramolecular balance has shown that modulations in these extended interaction surfaces cause energetic differences that are relevant to enantioselective catalysis. In addition, the energetics of these interligand interactions are quite independent of the actual structures of the complexes. This is shown by similar formation and aggregation trends of complexes with the same ligand but different structures. The extended quasi‐planar electrostatic interaction surface of the (CH)CH₃Ph moiety explains the known pattern of successful ligand modulation and the substrate specificity of phosphoramidites. Thus, we propose modulations in these extended CH‐π and π‐π interaction areas as a refined stereoselection mode for these ligands. Based on the example of phosphoramidites, this study reveals three general features potentially applicable to various ligands in asymmetric catalysis. First, specific combinations of alkyl and aryl moieties can be used to create extended anisotropic interaction areas. Second, modulations in these interaction surfaces cause energetic differences that are relevant to catalytic applications. Third, bulky substituents with matching complementary interaction surfaces should not only be considered in terms of steric hindrance but also in terms of attractive and repulsive interactions, a feature that may often be underestimated in asymmetric catalysis.     

Rapid, low level determination of silver(I) in drinking water by colorimetric-solid-phase extraction

A rapid, highly sensitive two-step procedure for the trace analysis of silver(I) is described. The method is based on: (1) the solid-phase extraction (SPE) of silver(I) from a water sample onto a disk impregnated with a silver-selective colorimetric reagent, and (2) the determination of the amount of complexed analyte extracted by the disk by diffuse reflectance spectroscopy (DRS). This method, called colorimetric-solid-phase extraction (C-SPE), was recently shown effective in determining low concentrations (0.1-5.0 mg/ml) of iodine and iodide in drinking water. This report extends C-SPE to the trace (∼4 μg/l) level monitoring of silver(I) which is a biocide used on the International Space Station (ISS). The determination relies on the manually driven passage of a water sample through a polystyrene-divinylbenzene disk that has been impregnated with the colorimetric reagent 5-(p-dimethylaminobenzylidene) rhodanine (DMABR) and with an additive such as a semi-volatile alcohol (1,2-decanediol) or nonionic surfactant (Brij 30). The amount of concentrated silver(I) is then determined in a few seconds by using a hand-held diffuse reflectance spectrometer, with a total sample workup and readout time of ∼60 s. Importantly, the additive induces the uptake of water by the disk, which creates a local environment conducive to silver(I) complexation at an extremely high concentration factor (∼800). There is no detectable reaction between silver(I) and impregnated DMABR in the absence of the additive. This strategy represents an intriguing new dimension for C-SPE in which additives, directly loaded in the disk material, provide a means to manipulate the reactivity of the impregnated reagent.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

Degradation kinetics of poly(lactic-co-glycolic) acid block copolymer cast films in phosphate buffer solution as revealed by infrared and Raman spectroscopies

Poly(lactic-co-glycolic) acid (PLGA) is an important copolymer used in drug delivery platforms where controlled release is required. In this work we investigated the in vitro degradation of four PLGA copolymers with L/G molar compositions of 50/50, 65/35, 75/25 and 95/5. ATR-IR and Raman spectroscopies were used to differentiate and quantify the degradation rates of glycolic and lactic units. Both techniques were used to determine the polymer composition as a function of degradation time and the degradation rate constants for the hydrolysis of glycolic and lactic units were calculated using a 1st order kinetics approach. Our results revealed a two stage process for the degradation of PLGA cast films in PBS in agreement with our previous work. The degradation rate constant for glycolic unit was found to be 1.3 times higher than for lactic units. In addition the degradation rate constants for L and G units were shown to decrease proportionally with increasing initial lactic content of the copolymer used to prepare the films.     

Regiospecific nucleophilic substitution in 2,3,4,5,6-pentafluorobiphenyl as model compound for supramolecular systems. Theoretical study of transition states and energy profiles, evidence for tetrahedral SN2 mechanism

2,3,4,5,6-Pentafluorobiphenyl (PFBi) was modified by the nucleophilic substitution of one fluorine using a series of O-, S- and N-nucleophiles, viz. alkaline salts of 2,2,2-trifluoro-ethanol, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctanol, 1,2;3,4-di-O-isopropylidenexylitol, allylsulfane, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctane-1-thiol, 3-aminopropan-1-ol (7), and tert-butyl N-(3-aminopropyl)carbamate (8). All the substitutions took place exclusively at the position para to the phenyl group. (3-Amino-propyl)amino derivative of PFBi (15) was further modified at the terminal amino group by acylation or fluoroalkylation. The reaction of 8 was applied to meso-5,10,15,20-tetrakis-(pentafluorophenyl)porphyrin (20) to afford tris- (21) and tetrakis-substituted (22) products with complete para-regioselectivity. Theoretical studies of the reaction pathways of PFBi with ammonia, microsolvated lithium fluoride or lithium hydroxide revealed that no Meisenheimer-type intermediates are formed in the course of the simulated reactions: instead, tetrahedral S_N2 mechanism was found. Significant regioselectivity of the nucleophilic aromatic substitution, leading to 4-substituted products, was predicted based on relative transition state energies in agreement with the observed experimental results.     

Cetylpyridinium bromide-based oil-in-water microemulsions as a medium for hydrolysis of esters of phosphorus acids in the presence of primary amines

High-resolution ¹H NMR technique with Fourier-transform and pulsed-gradient spin-echo was used to study the structure of oil-in-water microemulsions based on cetylpyridinium bromide. The sizes of microdrops and the distribution of components between the disperse and continuous phases were found. It was shown for the hydrolytic decomposition of O,O-bis-(p-nitrophenyl) methyl phosphonate in the presence of amines that the microemulsion medium can affect both the rate and mechanism of hydrolysis. The reaction rate constants depend on the structure of microdrops.     

Functionalized carbon dots as sensors for gold nanoparticles in spiked samples: Formation of nanohybrids

This paper reports the synthesis, passivation and functionalization of luminescent carbon dots (CDs) possessing surface thiol ending groups. A simple procedure involving amidation of passivated carbon dots (p-CDs) with cysteamine boosts their photoluminescent properties and enables their use as easily controlled fluorescent nanosensors for determining citrate–gold nanoparticles (AuNPs). The mechanism behind the quenching phenomenon was established from fluorescence measurements at high temperatures and lifetime tests, and found to involve static quenching leading to the formation of CD–AuNP nanohybrids. A method for determining AuNPs in complex matrices was developed and validated by application to spiked drinking water and mussel tissues. The limits of detection and quantitation for AuNPs thus obtained were 0.20 and 0.66 nmol L^–1, respectively.     

Effective chemoselective deprotection of 3,4-dimethoxybenzyl (DMB) ethers in the presence of benzyl and p-methoxybenzyl (PMB) ethers by phenyliodine(III) bis(trifluoroacetate) (PIFA)

In this Letter, a selective deprotection of the alcohol protecting 3,4-dimethoxybenzyl (^3,4DMB) group is described. The hypervalent iodine(III) reagent phenyliodine bis(trifluoroacetate) (PIFA) is found to be an efficient reagent for the chemoselective deprotection of ^3,4DMB ethers in the presence of benzyl, p-methoxybenzyl, methoxymethyl, tert-butyldimethylsilyl, and tert-butyldiphenylsilyl ethers under mild conditions. This is the first example of the selective deprotection of the ^3,4DMB group from a hydroxy group with PIFA.     

NMR study of phase separation in D2O/ethanol solutions of poly(N-isopropylmethacrylamide) induced by solvent composition and temperature

¹H and ¹³C NMR spectroscopies were applied to investigate phase separation in solutions of poly(N-isopropylmethacrylamide) (PIPMAm) in D₂O/ethanol (EtOH) mixtures induced by solvent composition (cononsolvency) and temperature. Effects of EtOH content in D₂O/EtOH mixtures and temperature on the appearance and extent of the phase separation were characterized. Differences in mesoglobules formed during the phase separation induced by cononsolvency and temperature were found. For temperature-induced phase separation, ¹³C spin-spin relaxation times showed that besides the free EtOH expelled from the PIPMAm mesoglobules, there are also EtOH molecules bound in these mesoglobules. On the other hand, virtually no bound EtOH molecules were detected for mesoglobules formed as a consequence of the cononsolvency. For PIPMAm random copolymers containing negatively charged methacrylate units the phase separation induced by solvent composition was not observed.