CuCl catalyzed oxidation of aldehydes to carboxylic acids with aqueous tert-butyl hydroperoxide under mild conditions

Oxidation of aldehydes to the corresponding carboxylic acids can be performed highly efficiently at room temperature with 70% tert-butyl hydroperoxide (in water) in the presence of a catalytic amount of easily available ligand free CuCl in acetonitrile as solvent under very mild conditions. This oxidation protocol works well for various aldehydes including aliphatic aldehydes and aliphatic dialdehydes.     

Propargylic CH activation using a Cu(II) 2-quinoxalinol salen catalyst and tert-butyl hydroperoxide

The oxidation of alkynes to α,β-acetylenic carbonyls was achieved using only 1?mol% of a Cu(II) 2-quinoxalinol salen catalyst with tert-butyl hydroperoxide. These reactions proceed under mild conditions (70?°C) with excellent selectivity, producing yields up to 78%, and were used on a variety of alkyne substrates to produce the desired corresponding α,β-acetylenic ketones. In addition, these reactions can be run under aqueous conditions using a sulfonated version of the 2-quinoxalinol salen with good yields, reducing the need for volatile organic solvents.     

Allylic C-H activations using Cu(II) 2-quinoxalinol salen and tert-butyl hydroperoxide

Using a Cu(II) 2-quinoxalinol salen complex as the catalyst and tert-butyl hydroperoxide (TBHP) as the oxidant, allylic activations of olefin substrates can be converted to the corresponding enones or 1,4-enediones. Excellent yields can be achieved (up to 99%) within a very short reaction time and with great tolerance for additional functional groups. Possible mechanistic pathways have been characterized using Raman spectroscopy, cyclic voltammetry, and theoretical calculations.     

Selective oxidation of benzylic,allylic and propargylic alcohols using dirhodium(II) tetraamidinate as catalyst and aqueous tert‐butyl hydroperoxide as oxidant

We show that the dirhodium(II) tetraamidinate complex Rh₂(Msip)₄ efficiently catalyzes the oxidation of activated secondary alcohols at only 0.1 mol% loading. In this approach, we oxidized various benzylic, allylic and propargylic alcohols to the corresponding carbonyl compounds under mild aqueous conditions using the inexpensive oxidant T‐HYDRO® (70 wt% aqueous tert‐butyl hydroperoxide). Copyright © 2015 John Wiley & Sons, Ltd.     

Osmium (VI) catalyzed chemoselective oxidation of allylic and benzylic alcohols

A mild and highly chemoselective approach to oxidation of allylic, electron rich/deficient benzylic, and heterocyclic alcohols employing catalytic quantities of K₂[OsO₂(OH)₄] (3 mol %) and chloramine-T (50 mol %) is described. The protocol offers short reaction times (25 min–2 h), controlled oxidation, and tolerance to a variety of substrates. A systematic mechanistic study based on the LC-ESI-MS/MS reveals the presence of imidotriooxoosmium species which further reacts with alcohol to give the oxidized product.     

A new and highly efficient water-soluble copper complex for the oxidation of secondary 1-heteroaryl alcohols by tert-butyl hydroperoxide

The water-soluble copper complex generated in situ from CuCl₂ and 2,2′-biquinoline-4,4′-dicarboxylic acid dipotassium salt (BQC), has been revealed as a highly efficient and selective catalyst for the oxidation of secondary 1-heteroaryl alcohols to the corresponding heteroaromatic ketones with aqueous tert-butyl hydroperoxide, under mild conditions. The catalytic system is compatible with different heterocycles such as pyridines, pyrroles, indoles, thiophens, furans, thiazoles, and imidazoles.     

Clean and selective oxidation of alcohols catalyzed by ion-supported TEMPO in water

Three different types of ion-supported TEMPO catalysts are synthesized and their catalytic activity in the chemoselective oxidation of alcohols is investigated. These new catalysts show high catalytic activity in water and can be reused for the next run by extraction of products. Recycling experiments exhibit that ion-supported TEMPO can be reused up to five times without loss of catalytic activity. This system offers a very clean, convenient, environmentally benign method for the selective oxidation of alcohols.     

Mild and selective vanadium-catalyzed oxidation of benzylic, allylic, and propargylic alcohols using air

Transition metal-catalyzed aerobic alcohol oxidation is an attractive method for the synthesis of carbonyl compounds, but most catalytic systems feature precious metals and require pure oxygen. The vanadium complex (HQ)(2)V(V)(O)(O(i)Pr) (2 mol %, HQ = 8-quinolinate) and NEt(3) (10 mol %) catalyze the oxidation of benzylic, allylic, and propargylic alcohols with air. The catalyst can be easily prepared under air using commercially available reagents and is effective for a wide range of primary and secondary alcohols.     

CuCl catalyzed selective oxidation of primary alcohols to carboxylic acids with tert-butyl hydroperoxide at room temperature

Direct oxidation of primary alcohols to the corresponding carboxylic acids is performed highly efficiently at room temperature with anhydrous tert-butyl hydroperoxide in the presence of a catalytic amount of easily available CuCl under ligand free conditions in acetonitrile. Benzylic alcohols are more reactive than aliphatic alcohols, and these benzylic alcohols are selectively oxidized to the corresponding acids in the presence of aliphatic alcohols such as 1-octanol and 1-decanol.     

Efficient synthesis of carbonyl compounds: oxidation of azides and alcohols catalyzed by vanadium pentoxide in water using tert-butylhydroperoxide

Catalytic amount of vanadium reagent with tert-butylhydroperoxide as the oxidant was found to be an excellent oxidizing agent in aqueous medium. Vanadium pentoxide with aq tert-butylhydroperoxide readily oxidizes primary benzylic azides to the corresponding acids and secondary benzylic azides to the corresponding ketones in excellent yields. Further, vanadium pentoxide and aq tert-butylhydroperoxide combination turned out to be an effective catalyst for the oxidation of alcohols. Using vanadium pentoxide and aq tert-butylhydroperoxide primary alcohols were oxidized to the corresponding acids, whereas secondary alcohols underwent a smooth transformation to furnish corresponding ketones in excellent yields. All the oxidations are performed in water.     

An unprecedented highly efficient solvent-free oxidation of alkynes to α,β-acetylenic ketones with tert-butyl hydroperoxide catalyzed by water-soluble copper complex

The catalytic system composed of CuCl₂ and 2,2′-biquinoline-4,4′-dicarboxylic acid dipotassium salt (BQC) was found to be highly efficient for the selective α-oxidation of internal alkynes to the corresponding α,β-acetylenic ketones, with aqueous tert-butyl hydroperoxide under mild conditions. For the first time, full conversions of alkynes were reached with excellent selectivities, and propargylic tert-butylperoxy ethers were observed and suggested as the reaction intermediates. In the case of terminal alkynes, the oxidations are sluggish and low yields ranging from 32% to 40% were obtained.     

Aerobic photocatalytic oxidation of activated benzylic and allylic alcohols to carbonyl compounds catalyzed by molecular iodine

An efficient, selective and environmentally benign photocatalytic system in acetonitrile has been developed for aerobic oxidation of activated benzylic and allylic alcohols into their corresponding aldehydes and ketones without the need for a transition metal in moderate to excellent yields with a catalytic amount of iodine. Very high inter- and intramolecular chemoselectivities are observed when benzylic OH groups are oxidized in the presence of aliphatic (nonbenzylic) hydroxyls.     

Selective aqueous oxidation of alcohols catalyzed by copper (II) phthalocyanine nanoparticles

A new catalyst based on metallophthalocyanine nanoparticles has been synthesized and characterized by scanning electron microscopy (SEM). The aqueous oxidation of alcohols to the corresponding carbonyl compounds (aldehydes and ketones) has been studied using tetra-n-butyl-ammonium-peroxo-monosulfate (n-Bu₄NHSO₅) as an oxidant and a catalytic system consisting of copper (II) phthalocyanine nanoparticles in water. The highly selective oxidation gave excellent yields of related aldehydes or ketones without remarkable over-oxidation of the carboxylic acids. Organic co-solvents, surfactants, and co-catalysts were not used in this catalytic strategy. This strategy was green and time effective. The oxidant's by-product (TBAHSO₄) and catalyst can be efficiently recovered and reused several times without any significant change of catalytic activity.     

Green oxidation of 2-imidazolines with tert-butyl hydroperoxide catalyzed by supported manganese(III) porphyrin in water

Green oxidation of 2-substituted imidazolines with tert-butyl hydroperoxide catalyzed by tetraphenylporphyrinatomanganese(III) chloride, [Mn(TPP)Cl], supported on polystyrene and silica bound imidazole is reported. A variety of 2-imidazolines were efficiently converted to their corresponding imidazoles by these catalytic systems in H₂O. Ultrasonic (US) irradiation enhanced the catalytic activity of these catalysts and higher product yields were observed at shorter reaction times. These catalysts were re-used several times without significant loss of their catalytic activities. The effect of reaction parameters such as catalyst amount, reaction temperature, and the effect of US irradiation on the catalytic activity was also investigated.     

Effective oxidation of benzylic and aliphatic alcohols with hydrogen peroxide catalyzed by a manganese(III) Schiff-base complex under solvent-free conditions

A variety of alcohols were oxidized efficiently into the corresponding ketones and carboxylic acids in excellent yields with hydrogen peroxide using a manganese(III) Schiff-base complex as a catalyst under solvent-free and mild conditions. The oxidation procedure is very simple and the products are easily isolated in excellent yields.     

Pyridinium chlorochromate catalyzed oxidation of alcohols to aldehydes and ketones with periodic acid

A facile pyridinium chlorochromate (PCC) catalyzed (2 mol %) oxidation of alcohols to ketones and aldehydes using 1.05 equiv of H₅IO₆ in acetonitrile is described here.     

Copper(II) catalyzed selective oxidation of primary alcohols to aldehydes with atmospheric oxygen

Copper(II) complex 1 selectively catalyzes the oxidation of primary alcohols to aldehydes in high yields by atmospheric oxygen in the presence of TEMPO. This procedure does not require an additive and the catalyst 1 is recyclable without loss of activity.     

Solvent-free oxidation of alcohols by t-butyl hydroperoxide catalyzed by water-soluble copper complex

The catalytic system composed of CuCl₂ and 2,2′-biquinoline-4,4′-dicarboxylic acid dipotassium salt (BQC), was found to be highly efficient for the selective oxidation of secondary benzylic, allylic and propargylic alcohols to the corresponding ketones, with aqueous t-butyl hydroperoxide under phase-transfer catalysis conditions. The catalytic system is stable and can be recycled and reused several times without loss of activity.     

Selective aerobic oxidation of allylic and benzylic alcohols catalyzed by N-hydroxyindole and copper(I) chloride

In the presence of copper(I) chloride, tert-butyl 1-hydroxy-2-methyl-6-trifluoromethyl-1H-indole-3-carboxylate acted as a catalyst for the chemoselective aerobic oxidation of allylic and benzylic alcohols. A variety of primary and secondary allylic and benzylic alcohols were oxidized into the corresponding α,β-unsaturated carbonyl compounds in good yields without affecting non-allylic alcohols.     

Cu(II) bromide catalyzed oxidation of aldehydes and alcohols

A variety of aromatic, aliphatic and conjugated aldehydes and alcohols were transformed to the corresponding carboxylic acids and ketones with a quantitative conversion in high yields with 70% t‐BuOOH solution in water in the presence of catalytic (5 mol%) amounts of CuBr₂ under room temperature conditions. The conversion of 4‐methoxybenzaldehyde to 4‐methoxybenzoic acid is extremely facile in MeCN at ambient temperature in the presence of 5 mol% CuBr₂ and 2 equiv. 70% t‐BuOOH (water) as the oxidant. Oxidation with t‐BuOOH (water) alone in MeCN was found to be negligible. The scope of our catalytic system is applicable for a wide range of aromatic, conjugated and aliphatic substrates. These aldehydes were converted to the corresponding carboxylic acids in good isolated yields in reasonable times. It is pertinent to mention here that mild halogenic oxidants like hypochlorites, chlorites and NBS are not suitable for substrates with electron‐rich aromatic rings, olefinic bonds and secondary hydroxyl groups. Substitutions at different positions on the phenyl ring do not hinder the reaction, although the reaction time is affected. Oxidation of α,β unsaturated derivatives resulted in the formation of the expected acid in good yield. In addition, the transformation of secondary alcohols to ketones is extremely facile. No recemization was observed for menthone. This method possesses a wide range of capabilities since it can be used with other functional groups which may not tolerate oxidative conditions, involves fairly simple method for work‐up, exhibits chemoselectivity and proceeds under ambient conditions. The resulting products are obtained in good yields within reasonable time. Copyright © 2011 John Wiley & Sons, Ltd.