Direct acetoxylation and etherification of anilides using phenyliodine bis(trifluoroacetate)

Treatment of various anilides with 1.5 equiv. of phenyliodine bis(trifluoroacetate) (PIFA) and 1.0 equiv. of BF(3)·OEt(2) in AcOH at room temperature afforded the corresponding para-acetoxylated products with high regioselectivity. In addition, this reaction could be expanded to the etherification of anilides. In the presence of 2.0 equiv. of PIFA and 2.0 equiv. of BF(3)·OEt(2), the reaction of anilides with alcohols provided the corresponding para-etherified products in good yields.     

Regioselective ortho-acetoxylation/methoxylation of N-(2-benzoylphenyl)benzamides via substrate directed C-H activation

A highly regioselective ortho-acetoxylation of N-(2-benzoylphenyl)benzamides has been achieved using a catalytic amount of Pd(OAc)₂ (10 mol %) and a stoichiometric amount of PhI(OAc)₂ in a mixture of acetic anhydride and acetic acid via C-H activation to produce the corresponding 2-acetoxybenzamides in good yields. ortho-Methoxylation has been accomplished using methanol under similar conditions.     

Gold(III)-catalyzed direct acetoxylation of arenes with iodobenzene diacetate

AuCl(3)-catalyzed direct acetoxylation of electron-rich aromatic compounds has been achieved with iodobenzene diacetate as the acetoxylation reagent.     

An effective C-C double bond formation via Cu(I)-catalyzed dehydrogenation

A dehydrogenation method using Cu(I) and either N,N-di-tert-butylthiadiaziridine 1,1-dioxide or N,N-di-tert-butyldiaziridinone is reported. The dehydrogenation allows a facile introduction of C-C double bond(s) into various carbocycles and heterocycles such as oxazolines and thiazolines.     

Probing trace Pb(2+) using electrodeposited N,N'-(o-phenylene)-bis-benzenesulfonamide polymer as a novel selective ion capturing film

A novel film modified electrode for the determination of trace lead was developed in this work. The modified electrode was prepared by the electropolymerization of N,N′-(o-phenylene)-bis-benzenesulfonamide (PBSA) as the ion capturing reagent to create the functional film. The modified electrode shows a high selectivity towards Pb²⁺ over interfering cations, e.g. Cu²⁺, Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cr²⁺, and the calibration curve was linear in the concentration range of 2.0 × 10⁻⁹ to 1.0 × 10⁻⁷ M with correlation coefficient of 0.999. For 20 min accumulation, detection limit of 1.0 × 10⁻⁹ M was obtained at the signal to noise ratio of 3. Analytical availability of the modified electrode was demonstrated by the application for samples from pond water.     

Highly enantioselective (OC)Ru(salen)-catalyzed sulfimidation using N-alkoxycarbonyl azide as nitrene precursor

Enantioselective imidation of alkyl aryl sulfides with N-alkoxycarbonyl azide as a nitrene precursor was effected by using (OC)Ru(salen) complex 1 as catalyst. The steric and electronic nature of the N-alkoxycarbonyl group was found to strongly affect the enantioselectivity and the reaction rate, and high enantioselectivity (up to 99% ee) and good chemical yields were achieved by using 2,2,2-trichloro-1,1-dimethylethoxycarbonyl azide as the nitrene precursor at room temperature.     

Further studies of tetrakis(N,N′-dialkylbenzamidinato)diruthenium(III) chloro and alkynyl compounds: molecular engineering of metallayne monomers

Three diruthenium(III) compounds Ru₂(L)₄Cl₂, where L is mMeODMBA (N,N′-dimethyl-3-methoxybenzamidinate, 1a), DiMeODMBA (N,N′-dimethyl-3,5-dimethoxy benzamidinate, 1b), or DEBA (N,N′-diethylbenzamidinate, 1c), were prepared from the reactions between Ru₂(OAc)₄Cl and respective HL under reflux conditions. Metathesis reactions between 1 and LiC₂Y resulted in bis-alkynyl derivatives Ru₂(L)₄(C₂Y)₂ [Y=Ph (2), SiMe₃ (3), SiⁱPr₃ (4) and C₂SiMe₃ (5)]. The parent compounds 1 are paramagnetic (S=1), while bis-alkynyl derivatives 2-5 are diamagnetic and display well-solved ¹H- and ¹³C-NMR spectra. Molecular structures of compounds 1b, 1c, 2c, 3c and 4b were established through single crystal X-ray diffraction studies, which revealed RuRu bond lengths of ca. 2.32 Å for parent compounds 1 and 2.45 Å for bis-alkynyl derivatives. Cyclic voltammograms of all compounds feature three one-electron couples: an oxidation and two reductions, while the reversibility of observed couples depends on the nature of axial ligands.     

Synthesis of functionalized 7-azaindoles via directed ortho-metalations

Functionalization at C-5 of 4-fluoro- and 4-chloro-1-triisopropylsilyl-7-azaindole, 1 and 2, respectively, leads to a variety of new substituted 7-azaindole derivatives. We also describe two approaches to introduce functionality at C-6.     

Facile synthesis of acyclic azanucleosides from N-pivaloyloxymethyl amides and sulfonamides: synthesis of aza-analogues of Ganciclovir

N-Pivaloyloxymethyl amides and sulfonamides, readily available from N-alkylation of both amides and sulfonamides with commercial chloromethyl pivaloate, were converted into acyclic azanucleosides via a one-pot base silylation/nucleoside coupling procedure.     

Efficient preparation of (Z)-alkenyl derivatives from (Z)-vinyl (N,N-diisopropyl)carbamate via Ni-catalysed coupling reactions

A (Z)-vinyl (N,N-diisopropyl)carbamate treated with Grignard reagents, under Wenkert Nickel-catalysed conditions, gave access to several substituted (Z)-alkenyl derivatives. These Nickel-catalysed reactions, carried out with vinyl-, phenyl-, p-methoxyphenyl-, trimethylsilylmethylmagnesium bromide and benzylmagnesium chloride, led to the corresponding (Z)-alkenyl derivatives in good yields and high stereoselectivities.     

Segment Coupling to a Highly Hindered N-Terminal, Alamethicin-Related alpha-Aminoisobutyric Acid (Aib) Residue

A model [6+5] segment coupling process involving a C-terminal valine hexapeptide acid and a resin-attached pentapeptide amide, which N-terminated in a hindered Aib unit, was examined using a variety of HOAt-derived coupling reagents. Best results were observed with N-HAPyU in DCM solvent in which loss of configuration amounted to 5.8%.     

Nucleophilic addition of regioselectively lithiated indoline with aldimines for the syntheses of 2- and 7-indolinyl methanamine derivatives

Indolines bearing different N-protecting groups (N-Tbf and N-Boc) were deprotonated regioselectively at C-2 (sp³ hybridized ortho-H) and C-7 (sp² hybridized para-H) of the indoline ring, respectively. The generated organolithium intermediates reacted with aldimines to give the desired products in good yields with excellent anti-diastereoselectivities (>99:1). The produced N-Ts-(1-Tbf-indolin-2-yl)methanamine was facilely transformed to a fused heterocyclic compound.     

Stabilization of ortho-quinone methides by a bis(sulfonium ylide) derived from 2,5-dihydroxy-[1,4]benzoquinone

The zwitterionic intermediates (2a) in the oxidation of ortho-alkylphenols (1) and bis(sulfonium ylide) 3 form reasonably stable 2:1-complexes (4), in which the ortho-quinone methide (oQM) moieties are not present in quinoid form with the exocyclic in-plane methylene group, but as zwitterionic, aromatic conformer having an out-of-plane exocyclic methylene group. The complex 7 derived from the α-tocopherol model compound PMC (5) was comprehensively characterized. As exemplarily demonstrated, the adducts can be advantageously employed in organic synthesis as ‘stabilized oQMs’.     

Chiral N,N′-dioxide-Yb(III) complexes catalyzed enantioselective hydrophosphonylation of aldehydes

Chiral N,N′-dioxide-Ytterbium(III) complexes promoted the asymmetric addition of diethyl phosphate to aldehydes, giving the corresponding products with good yields and enantioselectivities. The addition of pyridine favored both reactivity and enantioselectivity. A possible catalytic cycle was proposed to explain the mechanism of the asymmetric hydrophosphonylation of aldehydes.     

Transition-metal-free approach to synthesis of indolines from N-(ortho-chloromethyl)aryl amides and iodonium ylides

A transition-metal-free method for the synthesis of indolines has been developed. In the presence of K₂CO₃, the cyclization reaction of N-(ortho-chloromethyl)aryl amides and iodonium ylides proceeded smoothly at room temperature in moderate to good yields.     

Ionic liquid enabled sulfamoylation of arenes: an ambient, expeditious and regioselective protocol for aryl sulfonamides

The ionic liquid, 1-butyl-3-methylimidazolium chloroaluminate, [bmim]Cl·AlCl₃, N=0.67 mediated syntheses of aromatic sulfonamides via electrophilic substitution of arenes is reported. The protocol serves as a distinctly expeditious and ambient route towards the syntheses of these pharmaceutically useful compounds, yielding quantitative conversions at room temperature within 5-30 min in most of the cases. The Lewis acidity and molar stoichiometry of the ionic liquid influences the extent of conversion. The method has been used for the syntheses of a diverse range of sulfonamides by variation of arenes and sulfamoyl chlorides. With monosubstituted benzenes, the protocol offers an added advantage of exclusive selectivity towards the formation of para substituted sulfonamides over the ortho products.     

Luminescent hexanuclear Cu(I)-cluster for the selective determination of copper

For the first time, the formation of a luminescent hexanuclear cluster has been used for the selective determination of copper. In aqueous solutions, the non-luminescent ligand N-ethyl-N′-methylsulfonylthiourea (EMT) forms an intensely red luminescent hexanuclear Cu(I)-cluster with an emission maximum at 663 nm only with Cu(II) ions. The intensity of the luminescence is proportional to the Cu(II) concentration and allows for selective Cu determinations in the μg l⁻¹-range. Ubiquitous metal ions such as Fe(III), Al(III), Ca(II), Mg(II), and alkaline metal ions, as well as other heavy metal ions, e.g. Co(II), Ni(II), Zn(II), Cd(II), Hg(II), and Pb(II) are tolerated in concentrations up to 50 mg l⁻¹. The detection limit for Cu(II) in aqueous solution, calculated according to Funk et al. [Qualitätssicherung in der Analytischen Chemie, Verlag Chemie, Weinheim, 1992], is 113 μg l⁻¹. The cluster formation has been used for the quantitative analysis of copper in tap water and in industrial water, as well as for the localization of copper adsorbed by activated-sludge flocs.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Synthesis and analytical application of a novel tetradentate N(2)O(2) Schiff base as a chromogenic reagent for determination of nickel in some natural food samples

A novel sensitive chromogenic reagent, N,N′-bis(3-methylsalicylidene)-ortho-phenylene diamine (MSOPD), has been synthesized and used in the spectrophotometric determination of nickel. At pH 8, MSOPD can react with nickel ion at room temperature to form a 1:1 complex. The apparent molar absorptivity is 9.5 × 10⁴ l mol⁻¹ cm⁻¹ at 430 nm. Beer's low is obeyed over the range 0-1.0 × 10⁻⁵ M of nickel with a detection limit of 1.36 × 10⁻⁸ M. The relative standard deviation for measurement of 3.41 × 10⁻⁶ M nickel is 1.3% (n = 10). The method has successfully been applied to determination of trace amounts of nickel in some natural food samples.     

Novel synthesis of α-nitroalkenes from nitroalkanes via halogenation of intermediate N,N-bis(silyloxy)enamines

An approach to conjugated nitroalkenes via oxidation of N,N-bis(silyloxy)enamines with bromine or iodine in the presence of tetra-n-butylammonium acetate is described. The acetate ion plays a key role by acting as a mild desilylating reagent. This new strategy allows the synthesis of α-nitroalkenes from the corresponding nitroalkanes.