磁性纳米Pd/Fe3O4催化剂的制备及其在Heck反应中的应用

通过使用聚乙烯吡咯烷酮作为稳定剂,合成了磁性Pd/Fe₃O₄纳米颗粒催化剂。对该催化剂进行粉末X射线衍射、透射电子显微镜、感应耦合等离子体和磁性表征。将Pd/Fe₃O₄催化剂用于Heck反应,检测其催化性能。测试结果表明Pd纳米颗粒负载在Fe₃O₄纳米颗粒上,而且催化剂的尺寸<20 nm,并在Heck反应中表现了极好的催化性能。此外,催化剂可以通过磁场回收利用, 且催化活性没有显著的降低。     

Delivery of Highly Active Noble‐Metal Nanoparticles into Microspherical Supports by an Aerosol‐Spray Method

Noble metal nanoparticles (NPs) with 1–5 nm diameter obtained from NaHB₄ reduction possess high catalytic activity. However, they are rarely used directly. This work presents a facile, versatile, and efficient aerosol‐spray approach to deliver noble‐metal NPs into metal oxide supports, while maintaining the size of the NPs and the ability to easily adjust the loading amount. In comparison with the conventional spray approach, the size of the loaded noble‐metal nanoparticles can be significantly decreased. An investigation of the 4‐nitrophenol hydrogenation reaction catalyzed by these materials suggests that the NPs/oxides catalysts have high activity and good endurance. For 1 % Au/CeO₂ and Pd/Al₂O₃ catalysts, the rate constants reach 2.03 and 1.46 min^?1, which is much higher than many other reports with the same noble‐metal loading scale. Besides, the thermal stability of catalysts can be significantly enhanced by modifying the supports. Therefore, this work contributes an efficient method as well as some guidance on how to produce highly active and stable supported noble‐metal catalysts.     

Conjugated Microporous Polymers for Heterogeneous Catalysis

Conjugated microporous polymers (CMPs) are a class of crosslinked polymers that combine permanent micropores with π‐conjugated skeletons and possess three‐dimensional (3D) networks. Compared with conventional materials such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs), CMPs usually have superior chemical and thermal stability. CMPs have made significant progress in heterogeneous catalysis in the past seven years. With a bottom‐up strategy, catalytic moieties can be directly introduced into in the framework to produce heterogeneous CMP catalysts. Higher activity, stability, and selectivity can be obtained with heterogeneous CMP catalysts in comparison with their homogeneous analogs. In addition, CMP catalysts can be easily isolated and recycled. In this review, we focus on CMPs as an intriguing platform for developing various highly efficient and recyclable heterogeneous catalysts in organic reactions. The design, synthesis, and structure of these CMP catalysts are also discussed in this focus review.     

Dual Microenvironment Modulation of Pd Nanoparticles in Covalent Organic Frameworks for Semihydrogenation of Alkynes

The chemical microenvironment modulation of metal nanoparticles (NPs) holds promise for tackling the long-lasting challenge of the trade-off effect between activity and selectivity in catalysis. Herein, ultrafine PdCu₂ NPs incorporated into covalent organic frameworks (COFs) with diverse groups on their pore walls have been fabricated for the semihydrogenation of alkynes. The Cu species, as the primary microenvironment of Pd active sites, greatly improves the selectivity. The functional groups as the secondary microenvironment around PdCu₂ NPs effectively regulate the activity, in which PdCu₂ NPs encapsulated in the COF bearing −CH₃ groups exhibit the highest activity with >99 % conversion and 97 % selectivity. Both experimental and calculation results suggest that the functional group affects the electron-donating ability of the COFs, which successively impacts the charge transfer between COFs and Pd sites, giving rise to a modulated Pd electronic state and excellent catalytic performance.     

Modulation of the superficial electronic structure via metal–support interaction for H2 evolution over Pd catalysts

Electronic interactions can radically enhance the performance of supported metal catalysts and are critical for fundamentally understanding the nature of catalysts. However, at the microscopic level, the details of such interactions tuning the electronic properties of the sites on the metal particle''s surface and metal–support interface remain obscure. Herein, we found polarized electronic metal–support interaction (pEMSI) in oxide-supported Pd nanoparticles (NPs) describing the enhanced accumulation of electrons at the surface of NPs (superficial Pd^δ−) with positive Pd atoms distributed on the interface (interfacial Pd^δ+). More superficial Pd^δ− species mean stronger pEMSI resulting from the synergistic effect of moderate Pd–oxide interaction, high structural fluxionality and electron transport activity of Pd NPs. The surface Pd^δ− species are responsible for improved catalytic performance for H₂ evolution from metal hydrides and formates. These extensive insights into the nature of supported-metal NPs may open new avenues for regulating a metal particle''s electronic structure precisely and exploiting high-performance catalysts.

A new type of electronic effect, polarized metal-support interaction (pEMSI), in oxide-supported Pd nanoparticles describing the enhanced accumulation of electrons at the superficial surface is responsible for improved catalytic H₂ evolution.     

The influence of hydrogen-containing molybdenum and tungsten bronzes on the catalytic activity of palladium composite catalysts for the oxidation of H<Subscript>2</Subscript>, CO,and CH<Subscript>4</Subscript>

The influence of hydrogen-containing molybdenum and tungsten bronzes on the catalytic activity of palladium composite catalysts for the oxidation of H₂, CO, and CH₄ was studied. It was found that the composite catalysts containing H _x MO₃ phases (M = W or Mo), which were formed by the reduction of MoO₃ and WO₃ oxides with hydrogen in the presence of deposited Pd, showed higher catalytic activity in the oxidation of small molecules (H₂, CO, and CH₄) with excess oxygen than the traditional Pd/Al₂O₃ deposited catalyst with the same content of the deposited metal. It was shown that the thermal stability of the H _x MO₃ phases was the limiting factor influencing the activity of these composite catalysts.     

Using Size-Exclusion Chromatography to Evaluate Changes in the Sizes of Au and Au/Pd Core/Shell Nanoparticles Under Thermal Treatment

In this study, we used size-exclusion chromatography (SEC) to evaluate the sizes of Au and Au/Pd core/shell nanoparticles (NPs) that had been subjected to thermal treatment, with the eluted NPs monitored through diode array detection (DAD) of the surface plasmon (SP) absorption of the NPs. In the absence of an adequate stabilizer, thermal treatment resulted in longer retention times for the Au NPs and shorter retention times for the Au/Pd core/shell NPs in the SEC chromatograms. Thus, thermal treatment influenced the sizes of these Au and Au/Pd core/shell NPs, through digestive ripening and Ostwald-type growth, respectively. In addition, the trends in the SP absorption phenomena of the NPs in the eluted samples, as measured using DAD, were consistent with the trends of their size variations, as measured from their elution profiles. In the presence of 3A-amino-3A-deoxy-(2AS,3AS)-??-cyclodextrin (H₂N-??-CD) as a stabilizer, the retention times and SP absorptions of the eluted Au and Au/Pd NP samples remained constant. Thus, H₂N-??-CD is a good stabilizer against size variation duration the thermal treatment of Au and Au/Pd core/shell NPs. A good correlation existed between the sizes obtained using SEC and those provided by transmission electron microscopy. Therefore, this SEC strategy is an effective means of further searching for suitable stabilizers for NPs, especially those exposed to harsh reaction conditions (e.g., in catalytic reactions).     

Triazole‐based ligands functionalized silica: Effects of ligand denticity and donors on catalytic oxidation activity of Pd nanoparticles

Triazole‐based ligands, tris (triazolyl)methanol (Htbtm), bis (triazolyl)‐phenylmethanol (Hbtm), and phenyl (pyridin‐2‐yl)(triazolyl)methanol (Hpytm), with differences in ligand denticity (i.e., bidentate and tridentate) and type of N donors (i.e., triazole and pyridine) were functionalized onto a silica support to produce the corresponding SiO₂‐ L ( L  = tbtm, btm, pytm). Subsequent reactions with Pd (CH₃COO)₂ in CH₂Cl₂ yielded Pd/SiO₂‐ L . ICP‐MS reveals that Pd loadings are higher with increased N loadings, resulting in the following trend: Pd/SiO₂‐tbtm (0.83 mmol Pd g^?1) > Pd/SiO₂‐btm (0.65 mmol Pd g^?1) ~ Pd/SiO₂‐pytm (0.63 mmol Pd g^?1). Meanwhile, TEM images of the used Pd/SiO₂‐ L catalysts after the first catalytic cycle show that the mean size of Pd NPs is highest with Pd/SiO₂‐pytm (8.5 ± 1.5 nm), followed by Pd/SiO₂‐tbtm (6.4 ± 1.6 nm) and Pd/SiO₂‐btm (4.8 ± 1.3 nm). Based on TONs, catalytic studies toward aerobic oxidation of benzyl alcohol to benzaldehyde at 60 °C in EtOH showed that Pd/SiO₂‐pytm possessed the most active surface Pd(0) atoms, most likely as a result of more labile properties of the pyridine–triazole ligand compared to tris‐ and bis (triazolyl) analogs. ICP‐MS and TEM analysis of Pd/SiO₂‐btm indicate minimal Pd leaching and similar average Pd NPs sizes after 1^st and 5^th catalytic runs, respectively, confirming that SiO₂‐btm is an efficient Pd NPs stabilizer. The Pd/SiO₂‐btm catalyst was also active toward aerobic oxidation of various benzyl alcohol derivatives in EtOH and could be reused for at least 7 reaction cycles without a significant activity loss.     

Novel Preparation of Polyethylene from Nano‐extrusion Polymerization Inside the Nanochannels of MCM‐41/MgCl2/TiCl4 Catalysts

The MCM‐41 and SiO₂ supported TiCl₄ and TiCl₄/MgCl₂ catalysts with different molar ratios of Mg/Ti were synthesized and used for ethylene polymerization under atmospheric pressure. The nanochannels of MCM‐41 serve as nanoscale polymerization reactor and the polyethylene nanofibers were extruded during the reaction. The nanofibers were observed in SEM micrographs of resulting polyethylene. The effect of MgCl₂ on catalytic activity and thermal properties of resulting polyethylene is investigated too. In the presence of MgCl₂, the catalytic activity increased and more crystalline polyethylene with higher melting points were formed. However, no fibers could be observed in the polyethylene prepared by SiO₂ supported catalysts.     

Using Size-Exclusion Chromatography to Evaluate Changes in the Sizes of Au and Au/Pd Core/Shell Nanoparticles Under Thermal Treatment

In this study, we used size-exclusion chromatography (SEC) to evaluate the sizes of Au and Au/Pd core/shell nanoparticles (NPs) that had been subjected to thermal treatment, with the eluted NPs monitored through diode array detection (DAD) of the surface plasmon (SP) absorption of the NPs. In the absence of an adequate stabilizer, thermal treatment resulted in longer retention times for the Au NPs and shorter retention times for the Au/Pd core/shell NPs in the SEC chromatograms. Thus, thermal treatment influenced the sizes of these Au and Au/Pd core/shell NPs, through digestive ripening and Ostwald-type growth, respectively. In addition, the trends in the SP absorption phenomena of the NPs in the eluted samples, as measured using DAD, were consistent with the trends of their size variations, as measured from their elution profiles. In the presence of 3A-amino-3A-deoxy-(2AS,3AS)-β-cyclodextrin (H₂N-β-CD) as a stabilizer, the retention times and SP absorptions of the eluted Au and Au/Pd NP samples remained constant. Thus, H₂N-β-CD is a good stabilizer against size variation duration the thermal treatment of Au and Au/Pd core/shell NPs. A good correlation existed between the sizes obtained using SEC and those provided by transmission electron microscopy. Therefore, this SEC strategy is an effective means of further searching for suitable stabilizers for NPs, especially those exposed to harsh reaction conditions (e.g., in catalytic reactions).

     

FeOx Coating on Pd/C Catalyst by Atomic Layer Deposition Enhances the Catalytic Activity in Dehydrogenation of Formic Acid

Hydrogen generation from formic acid (FA) has received significant attention.The challenge is to obtain a highly active catalyst under mild conditions for practical applications.Here atomic layer deposition (ALD) of FeO_x was performed to deposit an ultrathin oxide coating layer to a Pd/C catalyst,therein the FeO_x coverage was precisely controlled by ALD cycles.Transmission electron microscopy and powder X-ray diffraction measurements suggest that the FeO_x coating layer improved the thermal stability of Pd nanoparticles (NPs).X-ray photoelectron spectroscopy measurement showed that deposition of FeO_x on the Pd NPs caused a positive shift of Pd3d binding energy.In the FA dehydrogenation reaction,the ultrathin FeO_x layer on the Pd/C could considerably improve the catalytic activity,and Pd/C coated with 8 cycles of FeO_x showed an optimized activity with turnover frequency being about 2 times higher than the uncoated one.The improved activities were in a volcanoshape as a function of the number of FeO_x ALD cycles,indicating the coverage of FeO_x is critical for the optimized activity.In summary,simultaneous improvements of activity and thermal stability of Pd/C catalyst by ultra-thin FeO_x overlayer suggest to be an effective way to design active catalysts for the FA dehydrogenation reaction.     

Hydrogenative Ring-Rearrangement of Furfural to Cyclopentanone over Pd/UiO-66-NO2 with Tunable Missing-Linker Defects

Upgrading furfural (FAL) to cyclopentanone (CPO) is of great importance for the synthesis of high-value chemicals and biomass utilization. The hydrogenative ring-rearrangement of FAL is catalyzed by metal-acid bifunctional catalysts. The Lewis acidity is a key factor in promoting the rearrangement of furan rings and achieving a high selectivity to CPO. In this work, highly dispersed Pd nanoparticles were successfully encapsulated into the cavities of a Zr based MOF, UiO-66-NO₂, by impregnation using a double-solvent method (DSM) followed by H₂ reduction. The obtained Pd/UiO-66-NO₂ catalyst showed a significantly better catalytic performance in the aforementioned reaction than the Pd/UiO-66 catalyst due to the higher Lewis acidity of the support. Moreover, by using a thermal treatment. The Lewis acidity can be further increased through the creating of missing-linker defects. The resulting defective Pd/UiO-66-NO₂ exhibited the highest CPO selectivity and FAL conversion of 96.6% and 98.9%, respectively. In addition, the catalyst was able to maintain a high activity and stability after four consecutive runs. The current study not only provides an efficient catalytic reaction system for the hydrogenative ring-rearrangement of furfural to cyclopentanone but also emphasizes the importance of defect sites.     

A Facile and In-situ Methanol-mediated Fabrication of Low Pd Loading,High-efficiency and Size-selectivity Pd@ZIF-8 Hydrogenation Catalyst

In-situ encapsulation of tiny and well-dispersed Pd nanoparticles (Pd NPs) in zeolitic imidazolate frameworks (ZIFs) was firstly achieved using a one-pot and facile methanol-mediated growth approach, in which methanol served as both solvent and a mild reductant. The microstructure, morphology, crystallinity, porosity as well as evolution process of the catalysts were determined by TEM, XRD, N₂ adsorption and UV-vis spectra. Due to the complete encapsulation of such Pd NPs combined with ultrahigh surface area and uniform microporous structure of ZIF-8, the resulting Pd@ZIF-8-60 min nanocomposite exhibited more superior catalytic activity for olefins hydrogenation with TOF of 7436 h⁻¹ and excellent size selectivity than previously reported catalysts. Furthermore, the catalyst displays excellent recyclability for 1-octene hydrogenation and without any loss of the Pd active species.     

Influence of the thermal treatment conditions and composition of bimetallic catalysts Fe—Pd/SiO2 on the catalytic properties in phenylacetylene hydrogenation

The supported bimetallic Fe—Pd/SiO₂ catalysts with the different Fe (0.025—8 mass.%) and Pd (0.05—3.2 mass.%) loadings were synthesized by the incipient wetness impregnation of support. The samples were heat-treated under different conditions (calcination in air at 240—350 °C or reduction in an H₂ flow at 400 °C). The X-ray phase analysis revealed the formation of Pd⁰, α-Fe₂O₃ and Fe₃O₄ phases after calcination of the samples at 240—260 °C. The reduction of the calcined Fe—Pd samples in an H₂ flow at 400 °C enables the formation of Fe⁰ nanoparticles of size 17—20 nm. The synthesized catalytic systems were studied in the selective hydrogenation of phenylacetylene at room temperature and atmospheric pressure in a solvent (ethanol, propanol). The catalytic properties of the Fe—Pd catalysts depend on the nature of solvent, catalyst composition, and thermal treatment conditions. The application of the Fe—Pd bimetallic catalysts with a low Pd loading of 0.05—0.1 mass.% made it possible to reach the high activity and selectivity to styrene (91%) at the complete conversion of phenylacetylene.     

The role of doped Fe on the activity of alumina-supported Pt and Pd diesel exhaust catalysts

Supported Pt and Pd are most commonly used for oxidation catalysts. They have similar and different characteristics for deactivation factors. The catalytic activity of Pt and Pd catalysts supported on ??-Al₂O₃ was studied in the presence and absence of H₂O and SO₂ during CO oxidation under simulated conditions of diesel exhaust gas. Without the addition of H₂O and SO₂ to the feed gas, Pd/Al₂O₃ had a superior catalytic activity compared to Pt/Al₂O₃. The addition of H₂O to the feed gas strongly and negligibly affected the activity of Pd and Pt, respectively, while the addition of SO₂ to the feed gas had a strong poisoning effect on the catalytic activity of both Pt and Pd catalysts. Although being the most active, Pd catalysts exhibited a strong sensitivity to water and sulfur-containing compounds. Fe was added to the Pt and Pd catalysts to introduce sulfur resistance. The addition of Fe enhanced the activity of the catalysts by suppressing the phase transition of Al₂O₃ to Al₂(SO₄)₃ and by hindering metal sintering.     

Light-off Performance of Three-Way Catalysts Before and After Accelerated Aging Test with an Engine-Dynamometer

This study demonstrates the reaction behavior during the purification of model automotive exhaust gases over Pd catalysts before and after thermal degradation. In particular, to investigate the relationship between the Pd state and the reaction behavior of Pd/Al₂O₃ and Pd/CeO₂−ZrO₂ (CZ), operando X-ray absorption spectroscopy measurements were performed during purifying exhaust gases over real and model catalysts mimicking the degradation of Pd particles and CZ supports after accelerated aging tests. The NO reduction activity of the aggregated Pd metal species was as high as that of the highly dispersed Pd species, but hydrocarbon (HC) poisoning was significantly enhanced by the aggregation of Pd metal particles caused by thermal aging. The existence of a three-phase boundary (TPB) between the CZ, the Pd particles, and the gas phase strongly affected the catalytic activity at low temperatures, and the presence of a sufficient TPB facilitated the combustion of unburned HCs owing to the oxygen storage performance of CZ. Thus, the TPB reduced the poisoning of the precious metal surface by HC species at low temperatures. Therefore, the findings of this study will facilitate the development of next-generation gas purification catalysts with high activity and durability.     

Pd complexes of iminophosphine ligands: A homogeneous molecular catalyst for Suzuki–Miyaura cross-coupling reactions under mild conditions

The complexes formed by combining Pd(OAc)₂ and iminophosphine ligands (P^N) are active catalysts in Suzuki–Miyaura cross-coupling reactions under mild conditions. Aryl bromides and iodides, as well as benzyl chlorides give the corresponding coupled products in high yields at low temperatures (25–50 °C) using these catalysts. Iminophosphines containing the most sterically demanding groups attached to the N-imino moiety were the most effective ligands. New divalent Pd complexes of known iminophosphines were synthesised and their activity was compared with the in situ generated catalyst system. The complex resulting from the oxidative addition of 4-bromo anisole [Pd(4-CH₃OC₆H₄)Br(P^N)] was more active than the in situ generated system. However, palladacycles containing the iminophosphine ligand (e.g., {[C₆H₄CH(Me)₂St-Bu]Pd(P^N)}⁺PF₆⁻) were less active than the in situ generated catalyst due to the greater stability of the complexes that involve two bidentate ligands. Poisoning tests demonstrated that homogeneous mononuclear palladium species containing the iminophsophine ligand were responsible for the catalytic activity.     

A study of Pt–Pd/γ-Al2O3 catalysts for methane oxidation resistant to deactivation by sulfur poisoning

The catalytic oxidation of methane was studied over calcined and reduced Pt–Pd/γ-Al₂O₃ catalysts, in the presence and the absence of SO₂ in the CH₄–O₂ reaction feed. The effect of sulfation (SO₂ + O₂ for 4 h at 500 °C) was also studied on the catalyst resistance to deactivation by sulfur poisoning. Sulfating the calcined Pt–Pd/γ-Al₂O₃ catalysts resulted in a strong deactivation for the CH₄–O₂ reaction. However, the catalytic activity of the reduced-sulfated Pt–Pd/γ-Al₂O₃ catalyst for CH₄–O₂ reaction remained rather unaffected in the presence and in the absence of SO₂ in the reaction feed. XPS analysis revealed, over reduced-sulfated Pt–Pd/γ-Al₂O₃ catalysts, the presence of Pt(0) metallic surface species on which SO₂ interactions may be faster related to Pd surface species. The presence of Pt(0) may be necessary to prevent the interactions between SO₂ and Pd surface species. Long time catalytic tests showed that the activity of a reduced Pt–Pd/γ-Al₂O₃ catalysts for CH₄–O₂ reactions remained rather unaffected despite the presence of SO₂ in the reaction feed.     

Combustion of methane over supported palladium-copper bimetallic catalysts

Monometallic and bimetallic catalysts based on palladium and copper deposited on a spinel carrier have been investigated in the catalytic combustion of methane. Great differences were found in catalytic activity, according to the sequence Pd/MgAl₂O₄>CuO–Pd/MgAl₂O₄>Pd–CuO/MgAl₂O₄>CuO/MgAl₂O₄. They were explained by changes in surface composition of the catalysts. In the case of bimetallic catalysts the metallic surface is preferentially enriched in copper, which acts as a diluting agent for the Pd atom ensembles. As a consequence, the adsorption of reactants is limited and the catalysts so obtained behave like copper slightly doped with palladium.     

Palladium Nanoparticles Supported on Titanium‐Doped Graphitic Carbon Nitride for Formic Acid Dehydrogenation

Pd nanoparticles (NPs) supported on Ti‐doped graphitic carbon nitride (g‐C₃N₄) were synthesized by a deposition–precipitation route and a subsequent reduction with NaBH₄. The features of the NPs were studied by XRD, TEM, FTIR, XPS, EXAFS and N₂‐physisorption measurements. It was found that the NPs had an average size of 2.9 nm and presented a high dispersion on the surface of Ti‐doped g‐C₃N₄. Compared to Pd loaded on pristine g‐C₃N₄, the Pd NPs supported on Ti‐doped g‐C₃N₄ exhibited a high catalytic activity in formic acid dehydrogenation in water at room temperature. The enhanced activity could be attributed to the small Pd NPs size, as well as the strong interaction between Pd NPs and Ti‐doped g‐C₃N₄.