Process optimization of dip-coated MWCNTs thin-films: Counter electrode in dye sensitized solar cells

Present research article emphasizes the first report on a simple and cost-effective ‘dip and dry’ coating method to coat MWCNTs at room temperature as a counter electrode towards dye sensitized solar cells (DSSCs) with ZnO/Eosin-Y as a photoanode. Process optimization through the number of dips (10, 15, 18, and 20) have been performed and compared to standard platinum (Pt) as counter electrode with iodide-triiodide as a liquid electrolyte. Photovoltaic performance through current density-voltage characteristic under standard 1 Sun illumination condition (AM 1.5G, 100 ​mW/cm²) and external quantum efficiency have been well supported which are correlated through structural, surface morphological, and electrochemical studies. Interestingly, DSSCs device with 18 cycles of MWCNTs yields half of the power conversion efficiency than that of Pt device.     

Effective design of A-D-A small molecules for high performance organic solar cells via F atom substitution and thiophene bridge

Three novel small molecules with acceptor-donor-acceptor (A-D-A) configuration, SBDT1, SBDT2 and SBDT3, where 4,8-bis(octyloxy)benzo[1,2-b:4,5-b′]dithiophene (BDT) as the electron-donating core connecting to thiophene-substituted benzothiadiazole (BT) as electron-withdrawing are reported. The effects of fluorine atoms on the photophysical properties by introducing different fluorine atoms into the benzothiadiazole unit were investigated. These SBDTs exhibit good thermal stability, excellent panchromatic absorption in solution and film. SBDT2 and SBDT3 with fluorine-substituted BT possess a relatively deeper the highest occupied molecular orbital (HOMO). These A-D-A type molecules were treated as donor and PC₇₁BM as acceptor in bulk heterojunction (BHJ) small-molecule organic solar cells (SMOSCs). Among them, device based on SBDT2 gave the best device performance with a PCE of 5.06% with J_sc of 10.56 mA/cm², V_oc of 0.85 V, fill factor (FF) of 56.4%. These studies indicate that proper incorporation of fluorine atoms is an effective way to increase the efficiency of organic solar cells.     

Sol-gel spin coated well adhered MoO3 thin films as an alternative counter electrode for dye sensitized solar cells

In this work, we aim to develop a viable, inexpensive and non-toxic material for counter electrodes in dye sensitized solar cells (DSSCs). We employed an ultra-simple synthesis process to deposit MoO₃ thin films at low temperature by sol-gel spin coating technique. These MoO₃ films showed good transparency. It is predicted that there will be 150 times reduction of precursors cost by realizing MoO₃ thin films as a counter electrode in DSSCs compared to commercial Pt. We achieved a device efficiency of about 20 times higher than that of the previous reported values. In summary we develop a simple low cost preparation of MoO₃ films with an easily scaled up process along with good device efficiency. This work encourages the development of novel and relatively new materials and paves the way for massive reduction of industrial costs which is a prime step for commercialization of DSSCs.     

Effective design of A-D-A small molecules for high performance organic solar cells via F atom substitution and thiophene bridge

Novel A-D-A-type small molecule donors employ thiophene bridge and F-substitution to improve the power conversion efficiency in organic solar cell.     

Metal-free organic dyes with benzothiadiazole as an internal acceptor for dye-sensitized solar cells

We synthesized three metal-free organic dyes (H11–H13) consisting of a 3,6-disubstituted carbazole, benzothiadiazole, and cyanoacrylic acid. All the dyes exhibited high molar extinction coefficients and suitable energy levels for electron transfer from the electrolyte to the TiO₂ nanoparticles. Under standard AM 1.5G solar irradiation, the device using dye H13 with co-adsorbed chenodeoxycholic acid (CDCA) displayed the best performance: an open-circuit voltage (V_oc) of 0.71 V, a short-circuit current density (J_sc) of 12.69 mA cm⁻², a fill factor (FF) of 0.71, and a power conversion efficiency (PCE) of 6.32%. The PCE was ∼79% of that for commercially available N719 cells (8.02%) under the same conditions.     

Fluorine substituent effect on organic dyes for sensitized solar cells

Two sets of organic dyes containing a stilbene backbone with fluorine substituents were designed for a study on the quantum efficiency of dye-sensitized solar cells (DSSCs). The results revealed that adding a fluorine substituent on the phenyl group ortho to the cyanoacrylate can enhance the light-harvesting performance in comparison with the unsubstituted one. However, when the two ortho-positions were both substituted by fluorine atoms, the performance of DSSCs was substantially reduced. The reason was mainly ascribed to a distortion from a planar geometry caused by steric hindrance. The π-conjugation was therefore disturbed, and the result led to a substantial reduction of the short-circuit photocurrent density (J_sc). Another effect was found that the open-circuit photovoltage (V_oc) of the doubly substituted derivative was lower than that of the mono-substituted one. The more flexible conformation of the difluoro-substituted dyes induced an undesired nonradiative decay, therefore led to a reduction of open-circuit photovoltage. The phenomenon can be verified by electrochemical impendence spectrum. The non-planar geometry was realized by a computation using the density function theory (DFT) model. The slight blue shift of absorption band was also consistent with the calculated transition energy by a time dependent DFT model.     

Preparation of chemically sintered ZnO films and their application in dye sensitized solar cells formed on plastic substrates

Meso-porous zinc oxide films were prepared on tin-doped indium oxide-coated, polyethelene naphthalate substrates from binder-free ZnO slurry. The reaction with ammonium hydroxide was found to increase connection between ZnO grains by forming a nano-rod like structure followed by heating at 150 °C. The enhancement of adhesion among ZnO grains was evaluated using a nano-scratch technique. Two different xanthene dyes were used to sensitize ZnO electrodes, with a photo-voltage of 657 mV, fill-factor of 73% and photo-current of 4.1 mA cm⁻² with a maximum light to-electrical energy conversion efficiency of 2.0% being obtained for the plastic based ZnO|mercurochrome|electrolyte solar cell under 1 sun.     

Dyes for sensitized solar cells by using [2.2]paracyclophane as a bridging unit

Organic dyes that consist of a [2.2]paracyclophane moiety between a triphenylamine donor group and a cyanoacrylic acid acceptor group have exhibited considerably high values of open-circuit voltage (V_oc) in the range of 0.69–0.74 V. In an experiment that involved using an ion liquid electrolyte (E2 electrolyte), the values of V_oc were increased to 0.03–0.04 V because of a decrease in the concentration of LiI. A typical device demonstrated a maximal incident photon-to-current conversion efficiency (IPCE) of 60% in the region of 350–475 nm, a short-circuit photo current density (J_sc) of 8.80 mA cm⁻², an open-circuit photovoltage (V_oc) of 0.74 V, and a fill factor (FF) of 0.65, corresponding to an overall conversion efficiency of 4.24% of CPG2b. The photophysical properties were analyzed using a time-dependent density functional theory (TDDFT) model with the M062X functional.     

Design of high‐performance chlorine type dyes for dye‐sensitized solar cells

Intrinsic defect of electronic structure for the chlorine‐type porphyrin 1, which was synthesized for use in dye‐sensitized solar cell (DSSC), is found by theoretical calculation including density functional method (DFT), time‐dependent DFT, and C+/C? function. It is believed that the limited cell performance obtained by using dye 1 as the sensitizer is due to the existence of this electronic defect. To avoid this defect, a series of novel molecules with electron deficient π bridge were designed. The subsequent theoretical calculation indicated that the electron deficient π bridge in the newly designed molecule is quite effective in offsetting the electronic defect observed for dye 1. The parameters for the designed molecules closely associated with open‐circuit voltage and short‐circuit current density including dipole moment of dye vertical to the surface of semiconductor and light‐harvesting efficiency were then evaluated. By comparing these parameters of designed dyes with those of dye 1, we can predict that the DSSC based on dye 4 (2, 6‐cyan benzoic acid as anchoring group) should possess enhanced performance, which would be a valuable theoretical guidance for the practical work. © 2013 Wiley Periodicals, Inc.     

Effects of Core‐modification on Porphyrin Sensitizers to the Efficiencies of Dye‐sensitized Solar Cells

To study dye‐sensitized solar cells (DSSCs) with core‐modified porphyrins as the sensitizing dyes, three porphyrins with an ethynyl benzoic acid as an anchoring group are prepared. The properties of free‐base regular porphyrin (N4), thiaporphyrin (N3S) and oxaporphyrin (N3O) were thoroughly studied by spectroscopic methods, DFT calculations, and photovoltaic measurements. Replacing one of the porphyrinic core nitrogen atoms by oxygen or sulfur considerably changes the absorption spectra. The Soret band of the N3O and N3S observed bathochromic shifts of 3‐9 nm while the Q band reaches 700 nm to the near‐infrared region. The overall conversion efficiencies of the DSSCs based on these porphyrins are in the order N4 (3.66%) ? N3S (0.22%) > N3O (0.01%). The time‐correlated single photon counting observed short fluorescence lifetimes for N3O adsorbed both on TiO₂ and Al₂O₃ which explicates the poor efficiency of DSSC using N3O as the photosensitizer.     

The influence of noncovalent interactions in metal‐free organic dye molecules to augment the efficiency of dye sensitized solar cells: A computational study

The efficiency of dye sensitized solar cells (DSSCs) can be enhanced with achieving better planarity of metal‐free organic dye molecules and thinning of their aggregation on the semiconductor surface. We report that the subtle noncovalent N^…S interaction between the substituted phosphazene group and thiophene spacer unit in dye molecule which induces the desired planarity and avoid aggregation of such molecules on the TiO₂ surface using DFT calculations. DFT results show that phosphazene group increases the maximum absorption wavelength (λ_max), driving force for electrons injection (ΔG_injection), singlet excited state lifetime (τ), dipole moments (μ_normal), and number of electrons transferred from dye to TiO₂ surface (Δq), which are known to augment the efficiency of DSSCs. Further, the lower ΔG_regeneration value of phosphazene containing dyes (e.g., –.37 eV, dye 2 ) than the reported dyes (e.g., –.81 eV, dye 1 ) indicate the faster electron injection rate from the former dye to the semiconductor TiO₂. The role of phosphazene group to prevent the aggregation of dye molecules on the TiO₂ anatase surface was also examined with GGA‐PBE/DNP level of theory. The calculated results suggest that the dye molecules on 1 ‐(TiO₂)₃₈ and 2 ‐(TiO₂)₃₈ anatase clusters avoids the aggregation due to the steric congestion induced by phosphazene group. This work reports to accomplish dual properties with subtle noncovalent interactions in dye molecules to augment the efficiency in DSSCs.     

Synthesis and characterization of cross‐linkable ruthenium complex dye and its application on dye‐sensitized solar cells

A new crosslinkable light sensitizer, Ru(2,2′‐bipyridine‐4,4′‐bicarboxylic acid)(4,4′‐bis(11‐dodecenyl)‐2,2′‐bipyridine)(NCS)₂, denoted as Ru‐C for titanium oxide nanocrystalline‐based solar cells was synthesized with its crosslinking properties invesitigated by Fourier‐transform infrared and UV‐vis absorption spectroscopies. After crosslinking by itself or copolymerizing with methyacrylic acid, their sensitized solar cells with poly(methylacrylate)‐gelled electrolyte system not only attained more than 5% of power conversion efficiency at AM 1.5 illumination (100 mW/cm²), but also gave rise to long storage life. To the best our knowledge, this is the first crosslinkable dye ever applied to the DSSC in the literature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 366–372, 2010     

TCO-free dye solar cells based on Ti back contact electrode by facile printing method

The back contact dye solar cells (BCDSCs), in which the TCO(Transparent Conductive oxide) is omitted, have a potential for use of intact low-cost general substrates such as glass, metal foil and papers. Herein, we introduce a facile manufacturing method of a Ti back contact electrode (Ti BCE) for the BCDSCs. We found that the polylinkers such as poly(butyl titanate) have a strong binding property to make Ti particles connect one with another. A porous Ti film, which consists of Ti particles of ≤ 10? size connected by a small amount of polylinkers, has an excellent low sheet resistance of 10 Ω sq^-1 for an efficient electron collection for DSCs. This Ti BCE can be prepared by using a facile printing method under normal ambient conditions. Conjugating the new back contact electrode technology with the traditional monolithic structure using the carbon counter electrode, we fabricated TCO-less DSCs. These four-layer structurered DSCs consist of a dye-adsorbed nanocrystalline TiO₂ film on a glass substrate, a porous Ti back contact layer, a ZrO₂ spacer layer and a carbon counter electrode in a layered structure. Under AM 1.5 G and 100 mWcm^?2 simulated sunlight illumination, the four-layer structurered DSCs with N719 dyes and I^-/I₃^-redox electrolytes achieved PCEs up to 5.21 %.     

Quantitative investigation of local electric field through absorption spectrum in dye‐sensitized solar cells: Atomistic simulations

The local transient electric field in dye‐sensitized solar cells (DSSCs), created by heterointerfacial charge transfer on illumination, exerts an important role in the internal photoelectronic processes occurring at dye/semiconductor heterointerface in the time‐resolved measurement, for example, transient absorption spectroscopy. Herein, on the basis of theoretical simulations, we proposed a general strategy to quantitatively examine the nature of local electric field (microscopic nature) through absorption spectra of adsorbed dye molecule (macroscopic observation). A controllably modulated external electric field is imposed on the sensitized system to couple to local electric field, resulting in the absorption spectrum shift of ground‐state dye molecules. By fitting absorption spectrum under applied external electric field with Gauss–Stark equation, the quantitative property of local electric field would be obtained. The Gauss–Stark equation reflects the quantitative relationship between the local electric field and absorption spectrum shift of adsorbed ground‐state dye molecule. Our study not only provides origin and magnitude of Stark effect in DSSCs but also offers a promising route to explore the elementary photoelectronic processes experimentally and theoretically.     

Analysis on dye-sensitized solar cells based on Fe-doped TiO2 by intensity-modulated photocurrent spectroscopy and Mott-Schottky

The pure TiO2 and Fe salts [Fe（C2O4）3,5H2O]-doped TiO2 electrodes were prepared by the hydrothermal method. The pure TiO2 or Fe-doped TiO2 slurry was coated onto the fluorine-doped tin oxide glass substrate by the Doctor Blade method and then sintered at 450 ℃. The Mott-Schottks, plot indicates that the fiat band potential of TiO2 was shifted positively after Fe-doped TiO2. The positive shift of the fiat band potential improves the driving force of injected electrons from the LUMO of the dye to the conduction band of TiO2. This study shows that photovoltaic efficiency increased by 22.9% from 6.07% to 7.46% compared to pure TiO2, and the fill factors increased from 0.53 to 0.63.     

苯并噻二唑单元在聚合物光伏材料设计中的应用

聚合物太阳能电池因其易于加工、可制备成柔性器件、材料来源广泛等优点得到材料界和能源界的广泛关注。有机太阳能电池效率的不断提高主要得益于材料的发展和电池器件结构的优化。从材料设计角度考虑,种类众多的给体和受体单元被开发用来构建有机共轭分子,其中,苯并噻二唑单元由于共轭平面较大和吸电子性较强的特性被广泛用于构建高性能的有机太阳能电池材料。基于此,本文首先介绍了苯并二噻吩单元及其衍生物常见的合成方法,随后总结了其在构建聚合物给体方面的应用,最后对其后续发展方向和前景提出了展望。     

Substituent position effect on the properties of new unsymmetrical isomeric diarylethenes having a chlorine atom

Three new unsymmetrical photochromic diarylethenes bearing a chlorine atom at para-, meta- and ortho-position of one terminal benzene ring, namely {1-(2-methyl-5-phenyl-3-thienyl)-2-[2-methyl-5-(4-chlorophenyl)-3-thienyl]}perfluorocyclopentene (para 1o), {1-(2-methyl-5-phenyl-3-thienyl)-2-[2-methyl-5-(3-chlorophenyl)-3-thienyl]}perfluorocyclopentene (meta 2o), and {1-(2-methyl-5-phenyl-3-thienyl)-2-[2-methyl-5-(2-chlorophenyl) -3-thienyl]}perfluorocyclopentene (ortho 3o), have been synthesized. The substituent position effect on their properties, including photochromism, fluorescence both in solution and in PMMA amorphous film and their electrochemical properties were investigated in detail. The results elucidated that the chlorine atom and its substituent position had a remarkable effect on the absorption characteristics, photochromic reactivity, fluorescence, as well as the electrochemical performances of these diarylethene compounds. For diarylethenes 1, 2 and 3, the cycloreversion quantum yields were gradually increased when the chlorine atom was attached to the para-, meta- and ortho-positions of the one terminal benzene rings; but their molar absorption coefficients both of their open-ring and closed-ring isomers were remarkably decreased. The fluorescent properties of para-substituted diarylethene embedded in poly(methyl methacylate) (PMMA) amorphous film showed good fluorescent switches (quenched to 28%). Furthermore, the cyclic voltammograms experiments elucidated that the electrochemical properties of these diarylethene derivatives were also remarkably dependent on the chlorine atom position effect, which may be attributed to the different electron-inducing ability and steric effect when the chlorine atom was substituted on the different position of the terminal benzene ring.     

Enhanced Efficiency of Dye–sensitized Solar Cells Based on Bulk Synthesized TiO2 Nanorods Annealed at Different Temperatures

In this study, bulk TiO₂ nanorods are synthesized by hydrothermal method in order to be used in the dye‐sensitized solar cells (DSSCs). These nanorods are annealed at different temperatures and deposited electrophoretically. The influence of post heat treatment has been thoroughly investigated on fabricated DSSCs using electrochemical impedance spectroscopy (EIS). The results have revealed that the diameter, size and density of the prepared bulk nanorods are function of annealing temperatures. Optimization of the prepared DSSCs has led to an improved efficiency (ca. 3.82%) under AM 1.5 simulated sunlight.     

Molecular design of organic dyes based on vinylene hexylthiophene bridge for dye-sensitized solar cells

Three donor-(π-spacer)-acceptor (D-π-A) organic dyes, containing different groups (triphenylamine, di(p-tolyl)phenylamine, and 9-octylcarbazole moieties) as electron donors, were designed and synthesized. Nanocrystalline TiO₂ dye-sensitized solar cells were fabricated by using these dyes. It was found that the variation of electron donors in the D-π-A dyes played an important role in modifying and tuning photophysical properties of organic dyes. Under standard global AM 1.5 solar condition, the DSSC based on the dye D2 showed the best photovoltaic performance: a short-circuit photocurrent density (J _sc ) of 13.93 mA/cm², an open-circuit photovoltage (V _oc ) of 0.71 V, and a fill factor (FF) of 0.679, corresponding to solar-to-electric power conversion efficiency (η) of 6.72%. Supported by the Key Project of Hunan Province of China (Grant No. 2008FJ2004), Natural Science Foundation of Hunan Province of China (Grant Nos. 09JJ3020 & 09JJ4005), and Scientific Research Fund of Hunan Provincial Education Department (Grant No. 08C888).