Characterization of the decomposition course of nickel acetate tetrahydrate in air

Thermogravimetry, differential thermal analysis, X-ray diffractometry and infrared spectroscopy showed that Ni(CH₃COO)₂·4H₂O decomposes completely at 500°C, giving rise to a mixture of Ni^o and NiO. The results revealed that the compound undergoes dehydration at 160°C and melts at 310°C. The water thus released hydrolyses surface acetate groups, acetic acid being evolved into the gas phase. At 330°C, the anhydrous acetate is converted into NiCO₃, releasing CH₃COCH₃ into the gas phase. The carbonate subsequently decomposes (at 365°C) to give NiO_(s), CO_2(g) and CO_(g). On further heating up to 373°C, a mixture of Ni^o and NiO is formed. Other gas-phase products were detected at 400°C, viz. CH₄ and (CH₃)₂CH=CH₂, which were formed in surface reactions involving initial gas-phase products. Non-isothermal kinetic parameters (A and ΔE) were calculated on the basis of temperature shifts experienced in the various decomposition processes as a function of heating rate (2–20 deg·min^?1).     

An investigation of the thermal decomposition of gold acetate

The thermal decomposition characteristics of gold acetate to produce gold nanoparticles were investigated. A rapid and violent fragmentation of the gold acetate particles was observed at approximately 103±20°C when a rapid heating rate of 25°C min⁻¹ was used, leading to formation of nanosized spherical and partially coalesced gold particles. Particle size analysis was used to investigate possible relationships between the gold acetate crystallite size and the gold nanoparticles produced by thermal decomposition. The results indicate rapid (<0.14 ms) coalescence of the gold particles occurs for fragments in close proximity.     

The non-isothermal decomposition of cobalt acetate tetrahydrate

The non-isothermal decomposition of cobalt acetate tetrahydrate was studied up to 500°C by means of TG, DTG, DTA and DSC techniques in different atmospheres of N₂, H₂ and in air. The complete course of the decomposition is described on the basis of six thermal events. Two intermediate compounds (i.e. acetyl cobalt acetate and cobalt acetate hydroxide) were found to participate in the decomposition reaction. IR spectroscopy, mass spectrometry and X-ray diffraction analysis were used to identify the solid products of calcination at different temperatures and in different atmospheres. CoO was identified as the final solid product in N₂, and Co₃O₄ was produced in air. A hydrogen atmosphere, on the other hand, produces cobalt metal. Scanning electron microscopy was used to investigate the solid decomposition products at different stages of the reaction. Identification of the volatile gaseous products (in nitrogen and in oxygen) was performed using gas chromatography. The main products were: acetone, acetic acid, CO₂ and acetaldehyde. The proportions of these products varied with the decomposition temperature and the prevailing atmosphere. Kinetic parameters (e.g.E and lnA) together with thermodynamic functions (e.g. °H, C _p and °S) were calculated for the different decomposition steps. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Thermal decomposition kinetics of lanthanum and neodymium bromide complexes with glycine or alanine

Four complexes of rare earth bromides with amino acids, REBr₃·3L·3H₂O (RE=La, Nd;L=glycine or alanine) were prepared and characterized by means of chemical analysis, elemental analysis, molar conductivity, thermogravimetry, IR spectra and X-ray diffraction. Their thermal decomposition kinetics from ambient temperature to 500°C were studied by means of TG-DTG techniques under non-isothermal conditions. The kinetic parameters (activation energyE and pre-exponential constantA) and the most probable mechanisms of thermal decomposition were obtained by using combined differential and integral methods. The thermal decomposition processes of these complexes are distinguished as being of two different types, depending mainly on the nature of the amino acid.     

Experimental investigation of methane hydrate decomposition by depressurizing in porous media with 3-Dimension device

In order to simulate the behavior of gas hydrate formation and decomposition, a 3-Dimension experimental device was built, consisting of a high-pressure reactor with an inner diameter of 300 mm, effective height of 100 mm, and operation pressure of 16 MPa. Eight thermal resistances were mounted in the porous media at different depthes and radiuses to detect the temperature distribution during the hydrate formation/decomposition. To collect the pressure, temperature, and flux of gas production data, the Monitor and Control Generated System (MCGS) was used. Using this device, the formation and decomposition behavior of methane hydrate in the 20～40 mesh natural sand with salinity of 3.35 wt% was examined. It was found that the front of formation or decomposition of hydrate can be judged by the temperature distribution. The amount of hydrate formation can also be evaluated by the temperature change. During the hydrate decomposition process, the temperature curves indicated that the hydrate in the top and bottom of reactor dissociated earlier than in the inner. The hydrate decomposition front gradually moved from porous media surface to inner and kept a shape of column form, with different moving speed at different surface position. The proper decomposition pressure was also determined.     

Phytochemical investigation of ethyl acetate extract from Curcuma aromatica Salisb. rhizomes

Three phytochemicals, curcumin 1, demethoxycurcumin 2 and β-sitosterol-3-O-β-d-glucopyranoside 3 have been isolated from the ethyl acetate extract of rhizomes of Curcuma aromatica. Chemical structures of all the three isolates were determined using spectroscopic and chemical analyses. β-Sitosterol-3-O-β-d-glucopyranoside has been isolated for the first time from this plant.     

Thermal decomposition of some linear trinuclear schiff base complexes with acetate bridges

Ni(II)–M(II)–Ni(II) nuclear structured complexes were prepared from N,N’-bis(salicylidene)-1,3-propanediamine (LH2) and its derivatives N,N’-bis(salicylidene)-2,2’-dimethyl-1,3-propanediamine (LDMH₂) and N,N’-bis(salicylidene)-2-hydroxy-1,3-propanediamine (LOH3), where M represents one of the following metal ions; Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II). Two different μ-bridges are found between the metal nucleus of the complexes. The phenolic oxygens and acetate ions tend to form μ-bridges between the terminal Ni(II) ions and central metal(II) ion. The coordinatively bonded DMF molecules, in the complexes, were observed to abandon the structure between 160–180°C. Further heating resulted primarily in the thermal decomposition of the complexes above 310°C, whereas metal oxide residue mixtures were observed above 650°C.     

Study of thermal decomposition of silver acetate

Thermal decomposition of silver acetate was studied (TG, DSC, mass-spectrometry, X-ray analysis, electron microscopy). Non-isothermal thermogravimetric data (obtained at two different rates of linear heating) were used for kinetic studies. Kinetic parameters were calculated only for the chosen decomposition step.     

Thermoanalytical investigations of the decomposition course of copper oxysalts

The thermal decomposition course of copper acetate monohydrate (CuAc) was examined on heating up to 600°C at various rates, by TG, DTA and DSC. Non-isothermal kinetic and thermodynamic parameters were determined in air or nitrogen. SEM was used to describe the decomposition course and the solid products were identified by IR and XRD analysis. The results indicated that CuAc was dehydrated at 190°C and then partially decomposed at 220°C, giving rise to CuO in addition to a minor portion of Cu₂O and Cu₄O₃. The last two oxides seemed to facilitate the decomposition of the rest of the anhydrous acetate. Cu₂O and Cu₄O₃ were oxidized in air at >400°C, in a process that did not occur in nitrogen.It is a pleasure to thank the Queen's University of Belfast, particularly the staff of the Electron Microscope Unit for assistance in obtaining the electron micrographs. Thanks are also due to the Egyptian Government for the granted fellowship.     

Reaction pathway and kinetics of the thermal decomposition of synthetic brochantite

The reaction pathway of the thermal decomposition of synthetic brochantite, Cu₄(OH)₆SO₄, to copper(II) oxide was investigated through the detailed kinetic characterization of the thermal dehydration and desulferation processes. The dehydration process was characterized by dividing into two overlapped kinetic processes with a possible formation of an intermediate compound, Cu₄O(OH)₄SO₄. The dehydrated sample, Cu₄O₃SO₄, was found first to be amorphous by means of XRD, followed by the crystallization to a mixture of CuO and CuO-CuSO₄ at around 776 K. The specific surface area and the crystallization behaviour of the amorphous dehydrated compound depend largely on the dehydration conditions. The thermal desulferation process is influenced by the gross diffusion of the gaseous product SO₃, which is governed by the advancement of the overall reaction interface from the top surface of the sample particle assemblage to the bottom.     

FT-Raman spectroscopic investigation of a pseudopolymorphic transition in caffeine hydrate

The FT-Raman spectra of caffeine hydrate and anhydrous β-caffeine have been recorded. The accelerated dehydration of the hydrate has been monitored at 30, 35 and 40°C using an environmental chamber. The spectra representing the individual pseudopolymorphic phases differed subtly throughout the entire spectral range. Gradual broadening of the =CH stretching vibration observed at 3121 cm⁻¹ and the progressive appearance of a C=O stretch at 1656 cm⁻¹ were ascribed to intermolecular bonding between CH and C=O in the anhydrous phase. Accompanying loss of resolution of CH deformations in the lower wavenumber region observed at 1475 and 1255 cm⁻¹ supports the suggestion of intermolecular association involving CH. Concurrent loss of resolution of the weak C=N stretch at 1454 cm⁻¹ and recession of the medium intensity H---C=N deformation at 1255 cm⁻¹ were also detected, acknowledging the loss of interaction between N9 of the imidazole ring and the water molecule. The concomitant disappearance of the weak H₂O libration at 890 cm⁻¹ is observed, which suggests the occurrence of molecular realignment associated with corresponding loss of water of crystallisation. On removal of the hydrate backbone of the caffeine hydrate crystal structure, the lattice collapses, resulting in reduction of the intermolecular distance between individual caffeine molecules. The subsequent formation of a less rigid structure is evident, whereby molecules are weakly associated by unconventional CH…O interactions.     

Thermal decomposition behaviour of lanthanum(III) tris-tartrato lanthanate(III) decahydrate

Lanthanum(III) tris-tartrato lanthanate(III) decahydrate, La[La(C₄H₄O₆)₃]·10H₂O has been synthesized and characterized by elemental analysis, IR, electronic spectral and X-ray powder diffraction studies. Thermal studies (TG, DTG and DTA) in air showed a complex decomposition pattern with the generation of an anhydrous species at ~170°C. The end product was found to be mainly a mixture of La₂O₃ and carbides at ~970°C through the formation of several intermediates at different temperature. The residual product in DSC study in nitrogen at 670°C is assumed to be a similar mixture generated at 500°C in TG in air. Kinetic parameters, such as, E*, ΔH, ΔS, etc. obtained from DSC are discussed. IR and X-ray powder diffraction studies identified some of the decomposition products. The tentative mechanism for the thermal decomposition in air of the compound is proposed. This revised version was published online in July 2006 with corrections to the Cover Date.     

乙酸烯丙酯的氢硅化反应

本文在对芳醛及环酮的氢硅化反应研究基础上, 进一步研究乙酸烯丙酯的氢硅化反应。(Ph~3P)~3RhCl作催化剂, 反应可在均相进行。采用假一级动力学方法, 以气相色谱法鉴测氢硅化产物生成的速率, 求得其反应速度常数, 进而分析其反应活性与反应物结构的关系, 并提出相应的可能机理。     

Thermal degradation of ethylene (vinyl acetate)

Ethylene (vinyl acetate), EVA, is a copolymer which is thermally degraded at high temperatures, with acetic acid release at approximately 620 K. This release can be studied by using thermal methods, and in particular thermogravimetric analysis.The present work was focused on establishing the polymer weight loss with temperature in order to calculate the activation energy of the overall deacetylation process. To obtain the final results, a Mettler TC50 instrument coupled with a Mettler TC11 microprocessor was used.The activation energies of four different industrial EVA formulations were calculated. The results obtained by applying different kinetic methods reported in the literature agreed reasonably well; they were compared in order to select the best method of reporting EVA deacetylation results.The authors wish to express their appreciation to DGICYT (Spain), Project AMB 94-107, for financial support of this study.     

Thermoanalytical investigation of the decomposition course of copper oxysalts

The thermal decomposition of copper nitrate trihydrate (CuNTH); Cu(NO₃)₂·3H₂O was studied up to 600°C by thermogravimetry (TG) and differential thermal analysis (DTA) in a dynamic atmosphere of air. The thermal events occurring throughout the decomposition course were characterized on the basis of spectral analyses using infrared spectroscopy (IR), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). Non-isothermal kinetic parameters were determined. The results showed that the decomposition course involves two main processes, firstly the formation of hydroxy copper nitrate and secondly, the decomposition of this compound to yield CuO. Pathways were suggested that may be involved in the decomposition course.     

Catalytic decomposition of potassium chlorate

Thermal decomposition of potassium chlorate in the presence of various additives is studied using thermogravimetric analysis and differential thermal analysis. Catalytic effects of metal oxides with comparable surface areas are compared, and the catalytic effects of a number of nonoxide additives are also studied. The nonoxide additives show catalytic activities similar to the corresponding metal oxides. Metal cations and their electron configurations determine the catalytic activity of various compounds. Metal cations with partially filledd shells have the highest activity, transition metal cations with completely emptyd orbitals are moderated active, and metal cations with completely filledd shells or noble gas configurations have minimum activity.     

Kinetics of hydrate formation using gas bubble suspended in water

An innovative experimental technique, which was devised to study the effects of temperature and pressure on the rate of hydrate formation at the surface of a gas bubble suspended in a stagnant water phase, was adapted in this work. Under such conditions, the hydrate-growth process is free from dynamic mass transfer factors. The rate of hydrate formation of methane and carbon dioxide has been systematically studied. The measured hydrate-growth data were correlated by using the molar Gibbs free energy as driving force. In the course of the experiments, some interesting surface phenomena were observed.     

Mechanism of thermal decomposition of cobalt acetate tetrahydrate

The thermal decomposition of cobalt acetate tetrahydrate (Co(CH₃COO)₂ · 4H₂O) has been studied via thermogravimetric (TG) analysis, in situ X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results of TG and XRD showed that the parent salt melted and then the dissolved crystalline water was vaporized in two steps. The dehydration process was followed by a major step concerning the decomposition of the acetate group, leading to basic acetate as an intermediate, which then produced CoO and Co in N₂ and H₂ atmosphere, respectively. Three decomposition intermediates Co(CH₃COO)₂ · 0.5H₂O, Co(CH₃COO)₂, and Co(OH)(CH₃COO) were presumed. In situ XRD experiments revealed that the intermediate basic acetate was poorly crystallized or even amorphous. Evolved gases analysis indicated that the volatile products of acetate decomposition were water vapor, acetic acid, ethylenone, acetone, and CO₂. A detailed thermal decomposition mechanism of Co(CH₃COO)₂ · 4H₂O was discussed.     

Thermal studies on thorium(IV) complexes of 1-butyl-1-methylpiperazinium iodide

Thorium(IV) complexes of the type Th(NO₃)₄·3L·2C₂H₅OH, Th(SCN)₄·L·C₂H₅OH and Th(SO₄)₂·2L·2C₂H₅OH (L=1-butyl-1-methylpiperazinium iodide(I) have been synthesised. From thermogravimetric (TG) curves, the decomposition pattern of the compounds has been analysed. The order, activation energy and apparent activation entropy of the thermal decomposition reaction have been elucidated. The heat of reaction has been calculated from differential thermal analysis (DTA) studies.