铸型尼龙/纳米ZnO复合材料的制备与表征

采用原位聚合反应制备MC尼龙6/纳米ZnO复合材料并对其性能、形貌和结晶形态进行了分析.分析结果表明:MC尼龙6/纳米ZnO复合材料中ZnO达到了纳米级分散,并且粒子分布比较均匀,粒子的粒径在30~50 nm左右.纳米ZnO没有改变尼龙6的结晶形态.纳米ZnO的加入起到同时增强增韧的作用;使体积电阻系数降了8×104倍、表面电阻系数降了5.7×104倍、摩擦系数降低了29%,MC尼龙6/纳米ZnO复合材料摩擦磨损性能和抗静电性能明显优于MC尼龙6;经过力学拉伸试验的破坏,引起MC尼龙6结构发生宏观应力变化,造成(002 202晶面)产生明显的择优取向.     

MC尼龙-纳米La2O3复合材料的制备及性能研究

用原位分散聚合法制备了一系列MC尼龙／纳米La2O3复合材料，研究了纳米La2O3用量对复合材料力学性能的影响，用SEM观察了La2O3粒子在MC尼龙基体中的分散情况，用XRD对复合材料的晶体结构进行了表征。SEM观察结果表明，当纳米La2O3用量小于1％时，纳米La2O3均匀分散于MC尼龙基体中，团聚情况很少，当纳米La2O3用量大于1％时，纳米La2O3开始团聚；XRD研究结果表明，纳米La2O3没有改变MC尼龙的结晶形态；力学性能的研究结果表明，随着纳米La2O3用量的增加，复合材料的拉伸强度、断裂伸长率、缺口冲击强度、弯曲强度和弯曲模量都呈先升后降的趋势，当纳米La2O3用量为0．5％时，复合材料的拉伸强度和断裂伸长率达到最大值，分别比MC尼龙提高17．9％和52．1％，当纳米La2O3的用量为1．0％时，复合材料的缺口冲击强度、弯曲强度和弯曲模量达到最大值，分别比MC尼龙基体提高36，6％．12．7％和16．3％。     

尼龙6/石墨纳米导电复合材料的制备与性能

通过原位插层聚合制备了尼龙 6 /石墨纳米导电复合材料 ,其室温导电渗滤阈值为 =0 75vol% ,远远低于常规导电粒子填充的聚合物复合材料 .当石墨体积分数为 2 0vol%时 ,室温电导率可达 10 -4 S/cm .透射电镜研究表明 :由于石墨经高温膨胀后其片层被剥离导致了片状石墨粒子具有巨大的径厚比 ,经原位插层聚合其片层厚度进一步被剥离为几十个纳米 ,同时原位插层聚合使得石墨粒子能够均匀分散在尼龙 6基体中 ,因而导致了该导电复合材料的低渗滤阈值和高导电性能 .     

尼龙6/蒙脱土纳米复合材料的等温结晶动力学研究

用ＤＳＣ法研究了熔体插层制备的尼龙６／蒙脱土纳米复合材料的等温结晶行为．结果表明,加入少量的蒙脱土可明显提高尼龙６的结晶速率,降低球晶径向生长的单位面积表面自由能．从Ａｖｒａｍｉ方程和Ｈｏｆｍａｎ理论出发,得出蒙脱土纳米粒子的存在可明显改变尼龙６的结晶行为     

聚合物/层状硅酸盐插层纳米复合材料的研究

简述了聚合物 /层状硅酸盐插层纳米复合材料方面的研究进展。阐述了层状硅酸盐的结构与性质以及纳米复合材料形成过程的热力学原理。重点介绍了尼龙、聚丙烯等聚合物的层状硅酸盐插层纳米复合材料的现状和技术发展趋势     

尼龙6/蒙脱土纳米复合材料的结晶行为

用广角Ｘ 射线衍射（ＷＡＸＤ）、差示扫描量热仪（ＤＳＣ）、小角激光散射（ＳＡＬＳ）等手段研究了尼龙６／蒙脱土纳米复合材料的结晶行为．结果表明分散在尼龙６基体中的蒙脱土纳米粒子起成核剂的作用．蒙脱土的表面改性增加了蒙脱土和尼龙６分子之间的界面粘接，它具有阻碍尼龙６结晶的作用，使结晶活化能增加     

尼龙6/蒙脱土纳米复合材料非等温结晶动力学和透明性研究

将有机化的蒙脱土与尼龙6(PA6)在Haake共混机中共混,制备出尼龙6/蒙脱土纳米复合材料(PA6N);对尼龙6/蒙脱土纳米复合材料和纯尼龙6分别进行差示扫描量热法非等温结晶试验,以了解蒙脱土在尼龙6/蒙脱土纳米复合材料中的成核作用、扩大尼龙6在包装领域的应用范围.与此同时,采用偏光显微镜测定了样品的结晶形态;采用紫...     

尼龙6/SiO_2纳米复合材料的制备及其力学性能和热稳定性

以表面含有氨基的可反应性纳米SiO2(RNS-A)和表面含有烷基碳链的可分散性纳米SiO2(DNS-3)作为填料,利用原位聚合法制备了尼龙6/SiO2纳米复合材料(相应的复合材料分别简记为RPA和DP3);采用透射电子显微镜观察了复合材料中纳米SiO2的表面形貌,并利用热失重分析仪测定了复合材料的热稳定性,进而考察了纳米SiO2表面功能基团对尼龙6力学性能和热稳定性的影响.结果显示,纳米SiO2能够很好地分散在尼龙6基体中,并使尼龙6的热分解温度提高10℃左右.与此同时,RPA的最大拉伸强度和冲击强度较纯尼龙6的分别提高34.5%和12.5%,DP3的最大拉伸强度和冲击强度分别提高18.2%和45.7%.这表明两种纳米SiO2均可以有效地提高尼龙6的力学性能和热稳定性;可以推测,纳米SiO2的增强效应与其在尼龙6基体材料中的分散和界面作用有关.     

熔体插层制备尼龙6/蒙脱土纳米复合材料的性能表征

通过熔体插层成功地制备了尼龙６／蒙脱土纳米复合材料，测试了力学性能、耐热性能和耐溶剂性．通过ＴＥＭ、ＷＡＸＤ、ＤＳＣ等手段，研究了结构与结晶行为，并与插层聚合的尼龙６／蒙脱土纳米复合材料进行了对比．实验表明通过熔体插层可使尼龙６基体插层于蒙脱土中，所得到的复合物的性能较尼龙６有很大提高，且与插层聚合的尼龙６／蒙脱土纳米复合材料的性能相当．     

纳米硅粉/MC尼龙6复合材料的制备与性能

将纳米硅粉分散于熔融的己内酰胺中,以NaOH为催化剂,2,4-甲苯二异氰酸酯为助催化剂,原位制备了纳米硅粉/MC尼龙6复合材料.用红外光谱、X射线衍射、场发射扫描电镜、热重分析仪和差示扫描量热仪对复合材料的界面结构和性能进行了研究.结果表明,纳米硅粉在尼龙6基体中具有较好的分散性,而且其与基体有比较强的界面作用,纳米硅粉促进了尼龙6的结晶,但是其对尼龙6的晶型结构没有产生明显的影响.     

Visible light driven photocatalytic activity of ZnO/CuO nanocomposites coupled with rGO heterostructures synthesized by solid-state method for RhB dye degradation

Metal oxide frame works along with carbon materials have been attracting tremendous attention of researches as the potential materials for energy and environmental remediation. In the present work heterostructures of (ZnO/CuO)/rGO ternary nanocomposites were synthesized by solid-state method. The crystalline structure of the nanoparticles was obtained from the XRD analysis. Optical band gap of the ZnO nanoparticles (3.1 eV) is tuned to 2.8 eV in the synthesized (ZnO/CuO)/rGO ternary nanocomposites. Field emission scanning electron microscope images of the (ZnO/CuO)/rGO ternary nanocomposites revealed formation of well-developed flowers like morphology of (ZnO/CuO) nanoparticles on rGO sheets. Photoluminescence spectroscopy analysis of (ZnO/CuO)/rGO ternary nanocomposites show enhancement in the electron-hole pair separation and thereby diminishing electron-hole pairs recombination rates effectively. In the present work, the photocatalytic activity of the ZC₃G₁₅ ternary nanocomposites show 99% and 93% of degradation efficiency respectively against RhB dye and 4-chlorophenol for 20 min under visible light irradiation. Thus, the simple solid-state method provides the effective ternary nanocomposites heterostructures light harvesting material for energy and environmental remediation.     

聚苯胺纳米复合材料的优良性能

聚苯胺纳米复合材料因结合了聚苯胺和纳米粒子的特殊性能,从而改善了基体的物理化学性能,赋予了材料前所未有的独特的性能,成为目前研究最为广泛的导电高分子纳米复合材料之一.本文基于国内外最新研究文献,结合典型事列详细综述了聚苯胺纳米复合材料在生物传感、催化、电磁、微波吸收和光电等方面呈现出的独特性能,简单评述了其在生物传感、催化、电磁、微波吸收、防腐等领域的应用前景.     

NaF-M(M=Fe,Cu)钠离子电池转换正极材料的研究

以纳米TiN为研磨剂,采用机械球磨技术制备了NaF-M（M = Fe, Cu）纳米复合物,探索了这类复合物作为钠离子电池转换正极材料的可能性. 电化学测试表明,NaF-Fe和NaF-Cu纳米复合物电极在钠离子电解液中能实现与Na⁺的逆向转换反应,其可逆放电容量达150 mAh.g^-1以上,并具有较好的循环寿命. 只要创造了适合相转变反应进行的微区结构,钠离子的转换反应也可以通过可逆的电化学转换反应实现,并从起始的富钠放电态直接充电至贫钠的荷电态. 本工作为开发高容量钠离子电池正极材料提供了新途径.     

Antibacterial activity of pH‐sensitive genipin cross‐linked chitosan/poly(ethylene glycol)/silver nanocomposites

Novel nanocomposites consisting of genipin cross‐linked chitosan (GC), poly(ethylene glycol) (PEG), and silver nanoparticles were prepared for such biomedical applications as the wound‐healing materials. Various amounts of silver nanoparticles were dispersed in the GC/PEG hydrogel matrix without severe aggregation. The effects of composition and silver nanoparticles on the physico‐chemical properties of samples were evaluated by infrared analysis, contact angle measurements, and swelling tests. The GC/PEG/Ag nanocomposite showed a pH‐sensitive swelling behavior. The surface hydrophilicity of GC/PEG/Ag nanocomposites was improved with the increase of silver nanoparticle content. L929 cell attachment was improved in the presence of silver nanoparticles. The antimicrobial function was assessed for the GC/PEG/Ag nanocomposites containing the silver content over 100 ppm. The silver nanoparticles had the dual functions of reinforcing structural stability and enhancing antimicrobial activity of GC/PEG/Ag nanocomposites. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and properties of low-cost cotton nanocomposite fabrics with in situ-generated copper nanoparticles by simple hydrothermal method

In this work, copper nanoparticles were in situ generated in cotton fabrics by simple hydrothermal method. These low-cost nanocomposite fabrics were characterized by scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction, thermogravimetric analysis, and antibacterial tests. The presence of spherical nanoparticles was visualized by SEM analysis. FTIR spectra did not show any differences between the peak positions of cotton fabrics and their nanocomposites. The crystallinity of cotton nanocomposites was enhanced by the copper nanoparticles. The cotton nanocomposite fabrics exhibited good antibacterial activity against Escherichia coli bacteria and hence can be considered for medical applications such as wound dressing, surgical aprons, hospital bed materials, etc.     

Versatile nanocomposites in phosphoproteomics: A review

Protein phosphorylation is one of the most important post-translational modifications. Phosphorylated peptides are present in low abundance in blood serum but play a vital role in regulatory mechanisms and may serve as casual factors in diseases. The enrichment and analysis of phosphorylated peptides directly from human serum and mapping the phosphorylation sites is a challenging task. Versatile nanocomposites of different materials have been synthesized using simple but efficient methodologies for their enrichment. The nanocomposites include magnetic, coated, embedded as well as chemically derivatized materials. Different base materials such as polymers, carbon based and metal oxides are used. The comparison of nanocomposites with respective nanoparticles provides sufficient facts about their efficiency in terms of loading capacity and capture efficiency. The cost for preparing them is low and they hold great promise to be used as chromatographic materials for phosphopeptide enrichment. This review gives an overview of different nanocomposites in phosphoproteomics, discussing the improved efficiency than the individual counterparts and highlighting their significance in phosphopeptide enrichment.     

Enhanced catalytic activity of composites of NiFe2O4 and nano cellulose derived from waste biomass for the mitigation of organic pollutants

This study reports facile in situ synthesis of magnetically retrievable nanocomposites of nanocellulose (derived from waste biomass) and NiFe₂O₄ nanoparticles using hydrothermal method. The synthesized nanocomposites were characterized using various techniques such as FT-IR, powder XRD, HR-TEM, BET and VSM. The characterization of nanocomposites clearly revealed that NiFe₂O₄ nanoparticles were well dispersed on the surface of cellulose nanofibres. The catalytic performance of the synthesized nanocomposites was assessed for both the photocatalytic oxidation and reduction of organic pollutants. The prepared nanocomposites displayed excellent catalytic performance in comparison to pristine NiFe₂O₄ nanoparticles due to stabilization and increased dispersability of NiFe₂O₄ nanoparticles on the cellulose matrix. The present work promotes the use of bio based renewable sources to fabricate environment friendly materials to be used in the field of catalysis for the abatement of organic pollutants.     

Conducting polyaniline-rutile TiO2 nanocomposites for the development of high-k dielectric materials

Inorganic dielectrics encapsulated in an organic matrix are showing excellent promise as novel dielectric materials. In this work, firstly highly organized crystalline nanoparticles of rutile TiO₂ were synthesized by acid hydrolysis of titanium isopropoxide at room temperature. Then we developed a novel dielectric material consisting of highly organized rutile TiO₂/polyaniline (PAni) nanocomposites by in-situ chemical oxidative polymerization. The structural, morphological, conducting, and dielectric properties of the rutile TiO₂/PAni nanoparticles have been evaluated by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution-transmission emission microscopy (HR-TEM), four-point probe technique, CV (Capacitance versus Voltage), and Impedance analyzer. The nanocomposites show 70 times higher permittivity compared to rutile nanoparticles and much higher compared to anatase/PAni (ES) nanocomposites at 10 MHz. Large interfacial polarizations, nanostructure, and dopant levels are the key factors for the large dielectric constant of the nanocomposites. The rutile/PAni (ES) nanocomposites might see potential uses in super-capacitors, gate dielectric in transistors, and capacitive-type gas sensors.     

Nanocomposites of polymers and metals or semiconductors: Historical background and optical properties

Upon transmission of visible light through composites comprising of a transparent polymer matrix with embedded particles, the intensity loss by scattering is substantially reduced for particle diameters below 50–100 nm (nanoparticles, nanosized particles). As a consequence, related materials (nanocomposites) have found particular interest in optical studies. The first part of this article deals with a historical survey on nanoparticles and nanocomposites and the importance of small particle sizes on their optical properties. The second part focuses on results from our laboratory concerning nanocomposites with extremely high or low refractive indices and dichroic nanocomposites and their application in bicolored liquid crystal displays (LCD). The inorganic colloids required for these studies (lead sulfide, iron sulfides, gold, and silver) were prepared in situ in presence of a polymer or isolated as redispersable metal colloids modified at the surface with a self‐assembled monolayer (SAM) of an alkanethiol. The nanocomposites themselves were finally obtained by coprecipitation, spin coating, solvent casting or melt extrusion, with poly(ethylene oxide), gelatin, poly(vinyl alcohol) and polyethylene as matrix polymers.     

SiO2@CdTe@Au复合纳米粒子的制备与非线性吸收特性

应用SiO₂纳米粒子、CdTe量子点和Au纳米粒子,采用逐层吸附法制备SiO₂@CdTe@Au纳米复合材料。同时对样品进行了测试和表征,从多个方面证明纳米复合材料成功制备。利用Z扫描技术测量了SiO₂@CdTe和SiO₂@CdTe@Au纳米复合材料在纳秒激光脉冲作用下的非线性吸收光学特性。实验结果表明：SiO₂@CdTe和SiO₂@CdTe@Au纳米复合材料均表现出饱和吸收特性。SiO₂@CdTe@Au较SiO₂@CdTe纳米复合材料具有更强的非线性光学特性,并对其机理进行了分析。