Electroelastic interaction between piezoelectric screw dislocation and circularly layered inclusion with imperfect interfaces

The interaction between a piezoelectric screw dislocation and an interphase layer in piezoelectric solids is theoretically investigated.Here,the dislocation located at arbitrary points inside either the matrix or the inclusion and the interfaces of the interphase layer are imperfect.By the complex variable method,the explicit solutions to the complex potentials are given,and the electroelastic fields can be derived from them.The image force acting on the dislocation can be obtained by the generalized PeachKoehler formula.The motion of the piezoelectric screw dislocation and its equilibrium positions are discussed for variable parameters.The important results show that,if the inner interface of the interphase layer is imperfect and the magnitude of degree of the interface imperfection reaches the certain value,two equilibrium positions of the piezoelectric screw dislocation in the matrix near the interface are found for the certain material combination which has never been observed in the previous studies(without considering the interface imperfection).     

压电螺位错与含界面裂纹圆形涂层夹杂的干涉

研究位于基体或夹杂中任意点的压电螺型位错与含界面裂纹圆形涂层夹杂的电弹耦合干 涉问题. 运用复变函数方法，获得了基体，涂层和夹杂中复势函数的一般解答. 典型例 子给出了界面含有一条裂纹时，复势函数的精确级数形式解. 基于已获得的复势函数和广 义Peach-Koehler公式，计算了作用在位错上的像力. 讨论了裂纹几何条件，涂层厚度和材 料特性对位错平衡位置的影响规律. 结果表明，界面裂纹对涂层夹杂附近的位错运动有很大 的影响效应，含界面裂纹涂层夹杂对位错的捕获能力强于完整粘结情况；并发现界面裂纹长 度和涂层材料常数达到某一个临界值时可以改变像力的方向. 解答的特殊情形包含了以 往文献的几个结果.     

ANALYSIS OF A SCREW DISLOCATION INSIDE A CIRCULAR INCLUSION WITH INTERFACIAL CRACKS IN PIEZOELECTRIC COMPOSITES

IntroductionPiezoelectric materials have potentials for use in many modern devices and compositestructures. The presence of various defects, such as inclusions, holes, dislocations andcracks, can greatly influence their characteristics and coupled behavio…     

Dislocation stability in three-phase nanocomposites with imperfect interface

Interface imperfection can significantly affect the mechanical properties and failure mechanisms as well as the strength and toughness of nanocomposites. The elastic behavior of a screw dislocation in nanoscale coating with imperfect interface is studied in the three-phase composite cylinder model. The interface between inner nanoin- homogeneity and intermediate coating is assumed as perfectly bonded. The bonding between intermediate coating and outer matrix is considered to be imperfect with the assumption that interface imperfection is uniform, and a linear spring model is adopted to describe the weakness of imperfect interface. The explicit expression for image force acting on dislocation is obtained by means of a complex variable method. The analytic results indicate that inner interface effect and outer interface imperfection, simultaneously taken into account, would influence greatly image force, equilibrium position and stability of dislocation, and various critical parameters that would change dislocation stability. The weaker interface is a very strong trap for glide dislocation and, thus, a more effective barrier for slip transmission.     

The interaction between a screw dislocation and a circular inhomogeneity in gradient elasticity

The interaction between a screw dislocation and a circular inhomogeneity in gradient elasticity is investigated. The screw dislocation is located inside either the inhomogeneity or the matrix. By using the Fourier transform method, closed analytical solutions are obtained when the inhomogeneity and the matrix have the same gradient coefficient. The explicit expressions of image forces exerted on screw dislocations are derived. The motion of the appointed screw dislocation and its equilibrium positions are discussed. The results show that the classical singularity is eliminated. Especially, for the case of a tiny inhomogeneity, the relation of dislocations and inhomogeneities become quite different. The screw dislocation may be attracted by the stiff inhomogeneity and repelled by the soft inhomogeneity when it tends to the interface. So there is an unstable equilibrium position when a dislocation tends to a tiny stiff inhomogeneity and there is a stable equilibrium position when a dislocation tends to a tiny soft inhomogeneity.     

On the electroelastic interaction of a piezoelectric screw dislocation with an elliptical inclusion in piezoelectric materials

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｄｉｓｌｏｃａｔｉｏｎｓｗｉｔｈｉｎｃｌｕｓｉｏｎｓｉｓｏｆｃｏｎｓｉｄｅｒａｂｌｅｉｍｐｏｒｔａｎｃｅｆｏｒｕｎｄｅｒｓｔａｎｄｉｎｇｔｈｅｐｈｙｓｉｃａｌｂｅｈａｖｉｏｒｏｆｍａｔｅｒｉａｌｓ.Ｓｕｃｈｓｔｕｄｉｅｓｃａｎｐｒｏｖｉｄｅｄｉｎｆｏｒｍａｔｉｏｎｃｏｎｃｅｒｎｉｎｇｃｅｒｔａｉｎｓｔｒｅｎｇｔｈｅｎｉｎｇｏｒｈａｒｄｅｎｉｎｇｍｅｃｈａｎｉｓｍｓｉｎｎｕｍｂｅｒｏｆｔｒａｄｉｔｉｏｎａｌａｎｄｃｏｍｐｏｓｉｔｅｍａｔｅｒｉ…     

Interaction between a screw dislocation and viscoelastic interfaces

The analytical solutions for the interaction between dislocations and interfaces are of great importance to materials scientists as well as to mechanics researchers. The interfaces are treated as perfectly bonded in the most of the existing research works, where the traction and displacement vectors are continuous across the interfaces. However, in reality, there are discontinuities of displacements across the interfaces. In the present paper, the interaction between a screw dislocation and an imperfect interface is considered. The imperfect interface is modeled by linear spring and dashpot, i.e. linearly elastic and viscoelastic behaviors are introduced to model the imperfection of the interface. Particularly, we solved the boundary value problem analytically for Kelvin and Maxwell type of interface. In terms of geometrical configurations, we obtained the solutions for two joint half-spaces and a circular inclusion embedded in an infinite matrix. The analytical results show that the force acting on the dislocation depends on the mismatch of materials and the imperfection of the interface and evolves as time elapses.     

Interaction between a dislocation and a core–shell nanowire with interface effects

The problem of a screw dislocation interacting with a core–shell nanowire (coated nanowire) containing interface effects (interface stresses) is first investigated. The interaction energy and the interaction force are calculated. The interaction force and the equilibrium position of the dislocation are examined for variable parameters (interface stress and material mismatch). The influence of the core–shell nanowire and the interface stresses on the interaction between two screw dislocations is also considered. The results show that the impact of the interface stresses on the motion and the equilibrium position of the dislocation near the core–shell nanowire is very significant when the radius of the nanowire is reduced to nanometer scale.     

Analysis of a piezoelectric screw dislocation inside an elliptical inhomogeneity with confocal rigid line in piezoelectric material

This paper deals with the electro-elastic coupling interaction between a piezoelectric screw dislocation which is located inside the elliptical inhomogeneity and an electrically conductive confocal rigid line under remote anti-plane shear stresses and in-plane electrical loads in piezoelectric composite material. The analytical-functions of the complex potentials, stress fields and the image force acting on the piezoelectric screw dislocation are obtained based on the principle of conformal mapping, the method of series expansion, the technical of analytic continuation and the analysis of singularity of complex potentials. The rigid line and the piezoelectric material property combinations upon the image force and the equilibrium position of the dislocation are discussed in detail by the numerical computation.     

Interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric material

The interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric medium is investigated. Closed-form solutions of the elastic and electrical fields induced by the screw dislocation are derived using the conformal mapping method in conjunction with the image principle. Based on the electroelastic fields derived, the stress and electric displacement intensity factors, the image force acting on the dislocation are given explicitly. We find that the stress and electric displacement intensity factors depend on the effective electroelastic material constants. In the case where one of two phases is purely elastic, the stress intensity factor and image force are plotted to illustrate the influences of electromechanical coupling effect, the position of the dislocation and the material properties on the interaction mechanism. The project supported by the Doctoral Foundation of Hebei Province (B2003113)     

压电螺型位错和共线界面刚性线夹杂的干涉效应

研究了压电材料中压电螺型位错和共线界面导电刚性线夹杂的电弹干涉效应．运用复变函数解析延拓技术与奇性主部分析方法,获得了该问题的一般解答．作为算例,求出了界面含一条刚性线夹杂时两种压电介质区域广义应力函数的封闭形式解．导出了作用在位错上的像力和刚性线夹杂表面剪应力和电位移的解析表达式．讨论了界面刚性线长度,两种材料的剪切模量比和压电系数比对位错力和刚性线表面剪应力的影响规律．为进一步研究该类问题提供了一个基本解。     

On a semi-infinite crack penetrating a piezoelectric circular inhomogeneity with a viscous interface

We investigate a semi-infinite crack penetrating a piezoelectric circular inhomogeneity bonded to an infinite piezoelectric matrix through a linear viscous interface. The tip of the crack is at the center of the circular inhomogeneity. By means of the complex variable and conformal mapping methods, exact closed-form solutions in terms of elementary functions are derived for the following three loading cases: (i) nominal Mode-III stress and electric displacement intensity factors at infinity; (ii) a piezoelectric screw dislocation located in the unbounded matrix; and (iii) a piezoelectric screw dislocation located in the inhomogeneity. The time-dependent electroelastic field in the cracked composite system is obtained. Particularly the time-dependent stress and electric displacement intensity factors at the crack tip, jumps in the displacement and electric potential across the crack surfaces, displacement jump across the viscous interface, and image force acting on the piezoelectric screw dislocation are all derived. It is found that the value of the relaxation (or characteristic) time for this cracked composite system is just twice as that for the same fibrous composite system without crack. Finally, we extend the methods to the more general scenario where a semi-infinite wedge crack is within the inhomogeneity/matrix composite system with a viscous interface.     

On the interaction between a dislocation and a circular inhomogeneity with imperfect interface in antiplane shear

The solution of appropriate elasticity problems involving the interaction between inclusions and dislocations plays a fundamental role in many practical and theoretical applications, namely, it increases the understanding of material defects thereby providing valuable insight into the mechanical behavior of composite materials.Although the problem of a three-phase circular inclusion interacting with a dislocation in antiplane shear has been presented [Xiao and Chen, Mech. Mater. 32 (2000) 485], the analysis is limited to the classical perfect bonding condition. The current paper considers the solution for a homogeneous circular inclusion interacting with a dislocation under thermal loadings in antiplane shear. The bonding along the inhomogeneity–matrix interface is considered to be imperfect with the assumption that the interface imperfections are constant. It is found that when the inhomogeneity is soft, regardless of the level of interface imperfection, the inhomogeneity will always attract the dislocation. As a result, no equilibrium positions are available. Alternatively, when the inhomogeneity is hard, an unstable equilibrium position is found which depends on the imperfect interface condition and the shear moduli ratio μ₂/μ₁.     

A SCREW DISLOCATION IN A THREE-PHASE COMPOSITE CYLINDER MODEL WITH INTERFACIAL RIGID LINES

The problem of the elastic interaction between a screw dislocation and a three-phase circular inclusion with interracial rigid lines （anti-cracks） is investigated. An efficient and concise method for the complex multiply connected region is developed, with which explicit series form solutions of the complex potentials in the matrix, and the interphase layer and inclusion regions are derived. Based on the complex potentials, the image force on the screw dislocation is then calculated by using the Peach-Koehler formula. The equilibrium position of the dislocation is discussed in detail for various rigid line geometries, interphase layer thicknesses and material property combinations. The main results show that the interracial rigid lines exert a significant perturbation effect on the motion of the screw dislocation near the circular inclusion surrounded by an interphase layer.     

Electro-elastic interaction between a piezoelectric screw dislocation and circular interfacial rigid lines

The electro-elastic interaction between a piezoelectric screw dislocation located either outside or inside inhomogeneity and circular interfacial rigid lines under anti-plane mechanical and in-plane electrical loads in linear piezoelectric materials is dealt with in the framework of linear elastic theory. Using Riemann–Schwarz’s symmetry principle integrated with the analysis of singularity of complex functions, the general solution of this problem is presented in this paper. For a special example, the closed form solutions for electro-elastic fields in matrix and inhomogeneity regions are derived explicitly when interface containing single rigid line. Applying perturbation technique, perturbation stress and electric displacement fields are obtained. The image force acting on piezoelectric screw dislocation is calculated by using the generalized Peach–Koehler formula. As a result, numerical analysis and discussion show that soft inhomogeneity can repel screw dislocation in piezoelectric material due to their intrinsic electro-mechanical coupling behavior and the influence of interfacial rigid line upon the image force is profound. When the radian of circular rigid line reaches extensive magnitude, the presence of interfacial rigid line can change the interaction mechanism.     

On the screw dislocation in a functionally graded piezoelectric plane and half-plane

In this paper closed-form expressions of the electroelastic field induced by a piezoelectric screw dislocation in a functionally graded piezoelectric plane and half-plane are derived. The material properties are assumed to vary exponentially along the x and y-directions. The solution for a screw dislocation in a functionally graded piezoelectric plane is obtained through introduction of two generalized stress functions. The solution for a screw dislocation in a functionally graded piezoelectric half-plane is derived by using the method of image. It is also found that the interaction between a piezoelectric screw dislocation and a circular insulating hole in the functionally graded piezoelectric material can be solved by using series expansion method.     

The interaction between a screw dislocation and a rigid wedge inhomogeneity with an elastic circular inhomogeneity at the tip

The interaction between a screw dislocation and an elastic semi-cylindrical inhomogeneity abutting on a rigid half-plane is investigated. Utilizing the image dislocations method, the closed form solutions of the stress fields in the matrix and the inhomogeneity region are derived. The image force acting on the dislocation is also calculated. The results were used to study the interaction between a screw dislocation and a rigid wedge inhomogeneity with an elastic circular inhomogeneity at the tip by means of conformal mapping. The results show that an unstable equilibrium point of the dislocation near the semi-cylindrical inhomogeneity is found when the inhomogeneity is softer than the matrix. Moreover, the force on the dislocation is strongly affected by the position of the dislocation and the shear modulus of the semi-circular inhomogeneity. Positive screw dislocations can reduce the SIF of the rigid wedge inhomogeneity (shielding effect) only when it located in the lower half-plane. The shielding effect increases with the increase of the shear modulu of both the matrix and the inhomogeneity and increases with the increase of the wedge angle. The shielding effect (or anti-shielding effect) reaches the maximum when the dislocation tends to the wedge inhomogeneity interface.     

纵向剪切下含共焦刚性核弹性椭圆夹杂中的螺型位错干涉

摘 要 研究了无穷远纵向剪切下无限大基体中含共焦刚性核弹性椭圆夹杂内任意位置螺型位错的干涉问题。运用复变函数保角映射、解析延拓等方法,获得了基体与夹杂区域的应力场的级数形式精确解,并得出了位错像力的解析表达式,导出了纵向剪切下两椭圆界面最大应力及其比值公式。分析结果表明：夹杂内部的刚性核对位错与夹杂的干涉产生明显的扰动效应,排斥硬夹杂内位错,并使之不断趋近弹性夹杂界面。对于软夹杂,夹杂中的位错存在稳定的平衡位置,当位错位于刚性核和平衡位置之间时,位错会趋于弹性夹杂界面;当位错位于平衡位置和弹性夹杂界面之间时,位错会离开界面。结果还显示,夹杂的长轴和短轴之比对位错与夹杂的干涉也有着不可忽视的影响,尤其当位错在刚性核附近时,随着夹杂的长、短轴比值的减小,核对位错的排斥力也明显减弱。本文解答包含了多个以往文献成果。     

位错偶极子和Ⅲ型界面裂纹的干涉效应

研究了多晶体材料中螺型位错偶极子和界面裂纹的弹性干涉作用.利用复变函数方法,得到了该问题复势函数的封闭形式解答.求出了由位错偶极子诱导的应力场和裂纹尖端应力强度应子,分析了偶极子的方向,偶臂和位置以及材料失配对应力强度因子的影响.推导了作用在螺型位错偶极子中心的像力和力偶矩,并讨论了界面裂纹几何条件和不同材料特征组合对位错偶极子平衡位置的影响规律.结果表明,裂纹尖端的螺型位错偶极子对应力强度因子会产生强烈的屏蔽或反屏蔽效应.同时,界面裂纹对螺型位错偶极子在材料中运动有很强的扰动作用.     

Edge dislocation interacting with an interfacial crack along a circular inhomogeneity

The elastic interaction of an edge dislocation, which is located either outside or inside a circular inhomogeneity, with an interfacial crack is dealt with. Using Riemann–Schwarz’s symmetry principle integrated with the analysis of singularity of the complex potentials, the closed form solutions for the elastic fields in the matrix and inhomogeneity regions are derived explicitly. The image force on the dislocation is then determined by using the Peach–Keohler formula. The influence of the crack geometry and material mismatch on the dislocation force is evaluated and discussed when the dislocation is located in the matrix. It is shown that the interfacial crack has significant effect on the equilibrium position of the edge dislocation near a circular interface. The results also reveal a strong dependency of the dislocation force on the mismatch of the shear moduli and Poisson’s ratios between the matrix and inhomogeneity.