含钒无机有机杂化材料的合成、结构与性质

含钒无机有机杂化材料的结构复杂多样,在吸附、氧化还原、电化学、催化、光学、磁学以及多孔、手性材料研究等方面应用前景广阔,引起人们广泛关注。本文综述了含钒无机有机杂化材料研究的最新进展,介绍了合成含钒无机有机杂化材料的主要方法,按照有机组分与无机骨架作用的方式分类总结了含钒无机有机杂化材料的结构,介绍了其在离子交换、电化学、磁学、光学、催化等方面的应用,并展望了该类材料的研究前景和意义。     

CuCl／OIH的合成、表征及其甲醇氧化羰化催化性能研究

合成了有机无机杂化材料负载的CuCl/席夫碱配合物催化剂CuCl/OIH,考察了制备条件对OIH载体及其合成中间产物的影响。采用FTIR、NMR、EA、TGA对有机无机杂化材料及催化剂进行了表征。将负载催化剂CuCl/OIH用于甲醇氧化羰化合成碳酸二甲酯反应,结果表明,负载催化剂CuCl/OIH与CuCl催化剂相比,碳酸二甲酯(DMC)产率提高了25%,负载催化剂循环使用四次后铜流失率仅为2.3wt%。     

有机基质在仿生材料合成中的应用

利用有机基质的模板作用通过仿生合成可以制备出性能优异的无机材料。文章综述了两亲有机分子、有机高分子、生物大分子三种有机基质在仿生材料合成中的应用 ,并对仿生材料合成这一新兴研究领域的发展趋势及广阔前景作了进一步的展望。     

改性氧化石墨烯/聚醚砜杂化荷正电纳滤膜的制备及表征

以壳聚糖荷正电改性的氧化石墨烯为无机添加剂,以聚醚砜为膜材料,聚乙烯吡咯烷酮为致孔剂,以N,N-二甲基乙酰胺为溶剂,采用相转化法制备了有机无机杂化纳滤膜.考察了不同改性氧化石墨烯添加量对膜分离性能的影响.研究结果表明,随着改性氧化石墨烯含量的增加,荷正电纳滤膜的断面形态结构并未发生明显改变,但杂化膜的纯水通量、分离选择性明显增加.从研究结果可以看出,改性氧化石墨烯的最佳添加质量分数在0.5%左右.     

聚合物在仿生合成中的应用研究进展

仿生合成技术通过模拟生物矿化机理,以有机物为模板控制无机物的生成,制备具有特殊结构及性能的无机材料.聚合物是仿生合成中较多采用的有机模板之一,用来控制无机粒子的成核、生长及排列,能够在温和条件下合成具有多级结构、特殊形貌和优异性能的有机,无机复合材料.本文综述了聚合物在仿生合成中的应用研究进展,并指出了存在的问题及发展方向.     

气-液界面有序介孔SiO2无机膜的仿生合成

早在几百万年以前,自然界就通过生物矿化过程形成了结构高度有序的有机/无机复合材料,如哺乳动物的牙床、骨骼以及贝壳珍珠层等[1]。随着对天然生物材料生物矿化过程研究的逐渐深入,材料研究者从中得到极为重要的启示:先形成有机物自组装体,无机先驱物在自组装聚集体与溶液相的界面处发生化学反应,在有机自组装体的模板作用下,形成有机/无机复合体,再将有机模板去除即可得到具有一定形状与组织结构的无机材料。这种模仿生物矿化中无机物在有机物调制下形成过程的材料合成,称为仿生合成(biomimetic synthesis)[2]。仿生合成过程中,通过选择有…     

锰钒氧无机-有机杂化材料

氧化锰、钒氧簇构筑块经与有机组分组合可形成新型结构的锰钒氧无机-有机杂化材料。人们预测锰钒氧无机-有机杂化材料将兼有金属锰配合物和钒氧无机-有机杂化材料结构的多样性、独特的物理性质和广阔的应用前景。本文综述了近年来锰钒氧无机-有机杂化材料的合成、组成、结构及有关性质的研究与进展。     

无机材料的仿生合成

生物矿化重要的特征之一是细胞分泌的有机基质调制无机矿物的成核和生长, 形成具有特殊组装方式和多级结构特点的生物矿化材料(如骨、牙和贝壳)。仿生合成就是将生物矿化的机理引入无机材料合成, 以有机物的组装体为模板, 去控制无机物的形成,制备具有独特显微结构特点的无机材料, 使材料具有优异的物理和化学性能。仿生合成已成为无机材料化学的研究前沿。本文综述了无机材料仿生合成的发展现状。     

化学键组装稀土/无机/有机聚合物杂化光功能材料的最新研究进展

本文针对近五年来光功能稀土/无机/有机聚合物杂化材料的最新进展进行了评述,其重点着眼于高分子化合物作为构筑基元的发光稀土杂化材料体系的化学键组装.内容主要涉及稀土有机高分子杂化材料、配位键构筑的稀土/无机/有机高分子杂化材料、共价键构筑的稀土/无机/有机高分子杂化材料、自由基聚合构筑的稀土/无机/有机高分子杂化材料几个重要方面.主要结合我们自己的近期研究工作,通过系统总结来展现该领域的研究现状并提出未来展望.     

Cd基化合物纳米晶-有机聚合物杂化太阳能电池研究进展

有机-无机杂化太阳能电池因其结合了有机材料和无机材料各自的优势而引起了人们的广泛关注和研究. Cd基化合物纳米晶因其具有制备方法简单、尺寸及形貌可控、载流子迁移率高和稳定性好等优点而成为最早被研究的一类无机受体. 本文介绍了有机-无机杂化太阳能电池的结构及原理, 分析了影响有机-无机杂化太阳能电池效率的三个主要因素, 分别是开路电压(V_oc)、短路电流(J_sc)和填充因子(FF). 从改善Cd基化合物纳米晶的合成方法, 增加Cd基化合物纳米晶和有机聚合物间的界面接触, 以及优化Cd基化合物纳米晶和有机聚合物所用溶剂和所占比例等方面阐述了近年来Cd基化合物纳米晶-有机聚合物杂化太阳能电池的研究进展. 并展望了Cd基化合物纳米晶-有机聚合物杂化太阳能电池的发展方向.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.