整体柱在线净化-液相色谱-高分辨质谱法快速测定牛奶中15种糖皮质激素

将自制的在线固相萃取柱与液相色谱串联四极杆静电轨道离子阱质谱技术相结合,建立了快速测定牛奶中15种糖皮质激素类药物的新方法.样品采用乙腈均质提取2 min,经自制在线固相萃取小柱富集净化,在Waters CORTECS T3(150 mm ×2.1 mm,5μm)分析柱上实现良好分离,外标法定量.15种目标物质量浓度在0.10～100 ng/mL范围内线性关系良好,相关系数均大于0.99;在0.20,0.40,2.0μg/kg3个添加水平下,15种糖皮质激素的回收率在87.1％ ～ 116.0％之间,相对标准偏差(RSD)在3.2％～8.7％(n=6)之间;方法的检出限(LOD,S/N≥3)和定量限(LOQ,S/N≥1O)分别为0.10和0.20μg/kg.该法适用于大批量牛奶中糖皮质激素类药物的快速定性筛查和定量分析.     

分散固相萃取-液相色谱-串联质谱法同时快速测定化妆品中81种糖皮质激素

建立了分散固相萃取-液相色谱-串联质谱同时快速测定化妆品中81种非法添加糖皮质激素(GCs)的分析方法。样品用水分散后加乙腈超声提取,经十八烷基键合硅胶(C18)和N-丙基乙二胺(PSA)净化,待测物选用具有多重色谱保留模式的Poroshell 120 PFP色谱柱(100 mm×2.1 mm,2.7μm)分离,以0.2%(v/v)乙酸水溶液-乙腈为流动相梯度洗脱,在电喷雾正离子模式下以动态多反应监测方式测定,内标法定量。81种待测物在各自的浓度范围内线性关系良好,相关系数均大于0.99,在3个不同的添加水平下,平均回收率为68.8%~105.3%,RSD为2.9%~13.1%(n=6),方法的检出限(S/N≥3)和定量限(S/N≥10)分别为0.002~0.006μg/g和0.005~0.020μg/g。筛查了137个化妆品样品,发现16个阳性样品,含量为16.9~158μg/g。结果表明,该法简便快速,灵敏可靠,适用于化妆品中81种GCs的同时快速定性定量筛查分析。     

固相萃取-高效液相色谱-串联质谱法测定葡萄干中105种农药残留

建立了固相萃取前处理-高效液相色谱-串联质谱(HPLC-MS/MS)法测定葡萄干中105种农药残留的分析方法。样品以乙腈提取,采用TPH固相萃取小柱净化。待测物经Zorbax Eclipse Plus C18柱(3.0 mm×100 mm,1.8μm)分离,以乙腈-0.1%甲酸水为流动相梯度洗脱;采用电喷雾正离子源(ESI+)、多重反应监测(MRM)模式检测;以基质匹配标准曲线外标法定量。105种农药在各自线性范围内相关系数均大于0.991;检出限(S/N≥3)为0.03~3.0μg/kg;定量限(S/N≥10)为0.1~10.0μg/kg;3个加标水平(1,2,10倍定量限)下,回收率在67.3%~117.8%之间,相对标准偏差在3.9%~20%之间。适用于葡萄干样品中农药残留的日常检测。     

分散固相萃取/高效液相色谱-串联质谱法快速测定饲料中87种药物残留

建立了分散固相萃取/高效液相色谱-串联质谱法(d SPE/LC-MS/MS)同时测定饲料中17种β-受体激动剂、18种β-内酰胺类、6种抗球虫类、5种大环内酯类、2种林可胺类、15种喹诺酮类、21种磺胺类及3种磺胺类增效剂等8类共计87种兽药的新方法。均质样品经0.1 mol/L Na2EDTA溶液分散后,以甲醇-乙腈(50∶50)超声提取,提取液用Bondesil-PSA吸附剂以分散固相萃取方式快速净化。待测物采用Poroshell EC-C18(100 mm×2.1 mm,2.4μm)色谱柱分离,在电喷雾离子源的正离子模式下以动态多反应监测(dynamic MRM)方式采集数据并作定性筛查和定量分析。87种药物在相应的浓度范围内线性良好,相关系数均大于0.99,在3个不同浓度加标水平下,平均回收率为63.7%~108.8%,相对标准偏差(RSD)为3.5%~15.2%,检出限(LOD,S/N≥3)和定量下限(LOQ,S/N≥10)分别为3~15μg/kg及10~50μg/kg。该方法灵敏、可靠,样品预处理简便、快速、价廉,适用于饲料中上述87种兽药的同时快速定性筛查和定量测定。     

分散固相萃取-同位素稀释-高效液相色谱-串联质谱法同时测定猪肉中26种β-受体激动剂

建立了分散固相萃取-同位素稀释-高效液相色谱-串联质谱(dSPE-ID-HPLC-MS/MS)同时测定猪肉中26种β-受体激动剂残留的方法。样品经β-葡萄糖醛苷酶/芳基硫酸酯酶水解12 h后,用高氯酸沉淀蛋白质,取上清液,调节pH值为9,用乙腈涡旋提取,分散固相萃取净化。选用具有混合分离模式的新型色谱柱Poroshell 120Phenyl-Hexyl(100 mm×2.1 mm,4.0μm)对待测物进行分离,在电喷雾离子(ESI)源正离子模式下以多反应监测(MRM)模式采集数据并做定性筛查和定量分析。26种待测物在相应的浓度范围内线性关系良好,相关系数均大于0.99,在3个不同浓度的添加水平下,平均回收率为65.3%~108.5%,相对标准偏差(RSD)为2.7%~13.3%,检出限(LOD,S/N=3)和定量限(LOQ,S/N=10)分别为0.03~0.1μg/kg及0.1~1.0μg/kg。该方法成本低廉、灵敏可靠,适用于同时对猪肉产品中26种β-受体激动剂残留进行定性和定量筛查。     

气相色谱-串联质谱检测鹅组织中哌嗪残留

建立了鹅组织(肌肉、肝脏、肾脏以及皮肤和脂肪)中哌嗪残留的气相色谱-串联质谱检测法。鹅组织经加速溶剂萃取(ASE350),乙腈提取,过Strata-X-C固相萃取小柱净化后的样品在乙酸酐和三乙胺条件下衍生。衍生产物经气相色谱-串联质谱仪(GC-MS/MS)检测,色谱柱为TG-5MS Amine(30 m×0.25 mm i.d.,0.25μm),载气为氦气,进样口和检测器温度均为280℃。采用EI模式,SCAN和SIM扫描定性,Auto SRM结合外标法定量。哌嗪添加量在5.1~2.5×10~3μg/kg范围内,线性关系良好,相关系数为0.9995。在定量限(LOQ:5.1,5.2,5.2,5.2)~2.0×10~3μg/kg的加标水平上,鹅组织中哌嗪的平均回收率为85.2%~95.5%,相对标准偏差(RSD)为1.6%~4.7%,日内RSD为1.2%~5.3%,日间RSD为2.0%~7.7%。检测限(LOD)和定量限(LOQ)分别在1.4~1.6μg/kg(S/N≥3)和5.1~5.2μg/kg(S/N≥10)之间。方法适用于鹅组织中哌嗪残留的检测。     

QuEChERS-同位素稀释-液相色谱-高分辨飞行时间质谱法高通量筛查化妆品中86种糖皮质激素

建立了QuEChERS-同位素稀释-液相色谱-四极杆串联飞行时间质谱同时快速筛查化妆品中86种糖皮质激素(Glucocorticoids, GCs)的高通量方法.样品经乙腈提取,改进的QuEChERS法净化,待测物选用具有多重色谱保留机理的新型色谱柱Poroshell 120 PFP (100 mm×2.1 mm,2.7 μm),以0.2% (V/V)乙酸和乙腈为流动相进行梯度洗脱分离,在电喷雾离子源的正离子模式下建立了一级精确质量数及二级碎片离子质谱图数据库,无需标准品即可完成化妆品中86种GCs的全面筛查与确证.所有待测物在2~200 μg/L浓度范围内线性良好,相关系数均大于0.99, 3个添加水平的平均回收率为66.2%~112.8%,相对标准偏差(RSD)为4.6%~13.9%,检出限(LOD,S/N≥3) 为0.006~0.015 mg/kg,定量限(LOQ,S/N≥10)为0.02~0.05 mg/kg.本方法简便高效、定性可靠、定量准确,适用于化妆品中非法添加GCs的高通量筛查.     

液相色谱-串联质谱法测定育肥猪配合饲料中的阿奇霉素

通过对提取溶剂、净化方法及色谱-质谱条件的优化,建立了配合饲料中阿奇霉素(AZM)的液相色谱-串联质谱测定方法。样品经乙腈超声波提取,MCX固相萃取柱净化,BDS Hypersil C_(18)(2.4μm,100 mm×2.1 mm)色谱柱分离,以甲醇-0.05 mol/L乙酸铵水溶液为流动相梯度洗脱,正离子模式电离,多反应监测模式检测,同位素内标法定量。在优化条件下,AZM在1~250μg/L范围内线性关系良好,相关系数(r~2)为0.999 1,检出限(S/N≥3)为2.8μg/kg,定量下限(S/N≥10)为8.4μg/kg;在0.5,1,5,10 mg/kg加标水平下,回收率为87.0%~106.6%,批内相对标准偏差为0.58%~5.4%,批间相对标准偏差为3.1%~5.4%。该方法准确、灵敏,选择性强,基质干扰小,可用于配合饲料中AZM的测定。     

分散固相萃取净化/液相色谱-串联质谱法测定化妆品中7种氨基苯甲醚

建立了同时测定化妆品中7种氨基苯甲醚类化合物(邻氨基苯甲醚、间氨基苯甲醚、对氨基苯甲醚、2,4-二氨基苯甲醚、2,5-二氨基苯甲醚、3,4-二氨基苯甲醚、3,3'-二甲氧基联苯胺)的分散固相萃取净化液相色谱-串联质谱(LC-MS/MS)分析方法。样品用甲醇-水(1∶1,含0.1%甲酸)溶液提取,经PSA分散固相萃取净化后,样液经Welch Ultimats XB-C_(18)(4.6 mm×150 mm,5μm)色谱柱分离,多反应监测(MRM)模式检测,以保留时间和特征离子对定性,外标法定量。结果表明,7种氨基苯甲醚类化合物在0.10~200.0μg/L浓度范围内线性关系良好,相关系数均大于0.998;方法检出限(S/N=3)为0.4~10.9μg/kg。样品日内回收率为64.7%~98.1%,相对标准偏差(RSD,n=6)为1.2%~10.6%;日间精密度(n=5)为2.3%~9.8%。对30个不同水剂类化妆品检测发现,其中1个样品检出3,3'-二甲氧基联苯胺,含量为5.3μg/kg。该方法准确可靠,适用于化妆品中7种氨基苯甲醚的同时测定。     

复合分子印迹固相萃取-HPLC-MS/MS法测定植物源性食品中多种农药残留

建立了复合分子印迹固相萃取(CMISPE)-高效液相色谱-三重四级杆串联质谱(HPLC-MS/MS)同时检测多种植物源性食品中20种三嗪类和磺酰脲类除草剂残留的分析方法。样品经乙腈提取后,利用液液萃取及复合分子印迹固相萃取小柱净化。液相色谱以乙腈和1%甲酸溶液作为流动相梯度洗脱,C8色谱柱分离,在多反应监测(MRM)正离子电喷雾扫描模式下进行HPLC-MS/MS分析。结果表明:20种除草剂在0.5~20 ng/m L范围内线性关系良好,相关系数均在0.99以上。对玉米样品进行3个水平的加标回收试验(5,10,20μg/kg),20种目标化合物的回收率在62.7%~117.4%之间,相对标准偏差(n=6)为1.7%~13.9%。检出限(S/N≥3)均小于0.63μg/kg,定量限(S/N≥10)均小于2.1μg/kg。方法适用于植物源性食品中20种三嗪类及磺酰脲类农药残留的检测。     

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性;均苯四甲酸二酐;联苯四羧酸二酐;二羟基联苯胺;聚酰亚胺;聚苯并噁唑;耐热性     

Studies on the Formation of Catalytically Active PGM Nanoparticles from Model Solutions as a Basis for the Recycling of Spent Catalysts

The paper presents basic studies on the precipitation of platinum, palladium, rhodium, and ruthenium nanoparticles from model acidic solutions using sodium borohydride, ascorbic acid, and sodium formate as reducing agents and polyvinylpyrrolidone as a stabilizing agent. The size of the obtained PGM particles after precipitation with NaBH₄ solution does not exceed 55 nm. NaBH₄ is an efficient reducer; the precipitation yields for Pt, Pd, Ru, Rh are 75, 90, 65 and 85%, respectively. By precipitation with ascorbic acid, it is possible to efficiently separate Pt, Rh, and Ru from Pd from the two-component mixtures. The obtained Pt, Pd, and Rh precipitates have the catalytic ability of the catalytic reaction of p-nitrophenol to p-aminophenol. The morphological characteristic of the PGM precipitates was analyzed by AFM, SEM-EDS, and TEM.     

Synthesis of Some Novel Class of Bis(isoxazoline) and Bis(aziridine) Derivatives

Synthesis of some new bis(isoxazoline) derivatives has been described from terepthaldehyde derived bis(nitrones) using microwave irradiation via 1,3‐dipolar cycloaddition reaction. Bis(isoxazoline) derivatives in turn successfully converted into new bis(aziridine) derivatives via Baldwin rearrangement. Simple reaction methodology, non involvement of catalysts, and good to excellent yields are the important features noticed in this synthesis.     

柴油加氢精制催化剂制备技术

柴油加氢精制催化剂制备技术的发展大致经历了3个阶段,由此形成了三代柴油加氢催化剂:单层分散的负载型金属硫化物催化剂,多层分散的负载型金属硫化物催化剂和非负载型金属硫化物催化剂。本文对金属硫化钼基柴油加氢精制催化剂的应用背景、制备思想及催化剂研究开发现状进行了系统的总结,对柴油加氢催化剂的发展方向进行了展望。     

Magnetism of metal-nitroxide compounds involving bis-chelating imidazole and benzimidazole substituted nitronyl nitroxide free radicals

Coordination compounds based on imidazole and benzimidazole substituted nitronyl nitroxide radicals with transition metal ions and trivalent lanthanide ions are described from the perspective of their magnetic properties.For the transition metal compounds the crystal structures show various metal-nitroxide dimensionalities including mononuclear (0D), one-dimensional (1D) and two-dimensional (2D) complexes. The mononuclear complexes were isolated with most metal ions of the first transition series. One copper(II) complex shows a copper(II)-radical ferromagnetic coupling (J = +75 cm⁻¹) while for the other mononuclear compounds, mainly with manganese(II), the metal-radical interactions are antiferromagnetic. The one-dimensional and two-dimensional complexes are manganese(II) compounds which show canting effects leading to weak ferromagnetism.For the trivalent lanthanide ions [La(III), Gd(III) and Eu(III)], three series of mononuclear complexes were obtained in which the metal center is bound to four, two or one nitroxide radicals depending on the counter ions and ancillary ligands. Unexpectedly, in most gadolinium(III) complexes, the Gd(III)-radical interactions were found to be antiferromagnetic in contradiction with other foundings and previous theoretical models. In support to the magnetic studies, the optical properties of the lantanide complexes have also been investigated and are briefly described.     

Direct Quantitation of Phytocannabinoids by One-Dimensional 1H qNMR and Two-Dimensional 1H-1H COSY qNMR in Complex Natural Mixtures

The widespread use of phytocannabinoids or cannabis extracts as ingredients in numerous types of products, in combination with the legal restrictions on THC content, has created a need for the development of new, rapid, and universal analytical methods for their quantitation that ideally could be applied without separation and standards. Based on previously described qNMR studies, we developed an expanded ¹H qNMR method and a novel 2D-COSY qNMR method for the rapid quantitation of ten major phytocannabinoids in cannabis plant extracts and cannabis-based products. The ¹H qNMR method was successfully developed for the quantitation of cannabidiol (CBD), cannabidiolic acid (CBDA), cannabinol (CBN), cannabichromene (CBC), cannabichromenic acid (CBCA), cannabigerol (CBG), cannabigerolic acid (CBGA), Δ9-tetrahydrocannabinol (Δ9-THC), Δ9-tetrahydrocannabinolic acid (Δ9-THCA), Δ8-tetrahydrocannabinol (Δ8-THC), cannabielsoin (CBE), and cannabidivarin (CBDV). Moreover, cannabidivarinic acid (CBDVA) and Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA) can be distinguished from CBDA and Δ9-THCA respectively, while cannabigerovarin (CBGV) and Δ8-tetrahydrocannabivarin (Δ8-THCV) present the same ¹H-spectra as CBG and Δ8-THC, respectively. The COSY qNMR method was applied for the quantitation of CBD, CBDA, CBN, CBG/CBGA, and THC/THCA. The two methods were applied for the analysis of hemp plants; cannabis extracts; edible cannabis medium-chain triglycerides (MCT); and hemp seed oils and cosmetic products with cannabinoids. The ¹H-NMR method does not require the use of reference compounds, and it requires only a short time for analysis. However, complex extracts in ¹H-NMR may have a lot of signals, and quantitation with this method is often hampered by peak overlap, with 2D NMR providing a solution to this obstacle. The most important advantage of the COSY NMR quantitation method was the determination of the legality of cannabis plants, extracts, and edible oils based on their THC/THCA content, particularly in the cases of some samples for which the determination of THC/THCA content by ¹H qNMR was not feasible.     

Transition metal complexes of the tripodal ligand 4-(2′-pyridylmethyl)-4-azaheptane-1,7-diamine. Crystal structures of [CuLCl]ClO4 and [NiL(MeCN)2](ClO4)2

The tripodal ligand 4-(2′-pyridylmthyl)-4-azaheptane-1,7-diamine has been prepared by reaction of 2-aminemethyl pyridine with acrylonitrile, followed by the reduction of the nitrile groups. Copper(II), nickel(II), zinc(II), cobalt(III) and chromium(III) complexes of the ligand have been prepared and characterized and the crystal structures of the complexes [CuLCl]ClO₄ and [NiL(MeCN)₂](ClO₄)₂ determined. The copper complex is five coordinate with approximate square pyramidal stereochemistry with the apical position occupied by a primary amine donor. The nickel complex is octahedral with the pyridine nitrogen donor lying trans to an acetonitrile ligand.     

Simple,Selective, and Sensitive Spectrophotometric Method for Determination of Trace Amounts of Nickel（Ⅱ）, Copper （Ⅱ）, Cobalt （Ⅱ）, and Iron （Ⅲ） with a Novel Reagent 2-Pyridine Carboxaldehyde Isonicotinyl Hydrazone

A selective and sensitive reagent of 2-pyridine carboxaldehyde isonicotinyl hydrazone（2-PYAINH） was synthesized and studied for the spectrophotometric determination of nickel, copper, cobalt, and iron in detail. At a pH value of 7.0, 9,0, 9.0, and 8.0, respectively, which greatly increased the selectivity; nickel, copper, cobalt, and iron reacted with 2-PYAINH to form a 1：2 yellow-orange, 1：2 yellow-green, 1：2 yellow and 1：1 yellow complexes, with absorption peaks at 363, 352, 346, and 359 nm, respectively. Under the optimal conditions, Beer＇s law was obeyed over the ranges of 0.01-1.4, 0.01-1.5, 0.01-2.7, and 0.01-5.4 mg/L respectively. The apparent molar absorptivity and Sandell＇s sensitivities were 8.4×10^4, 5.2×10^4, 7.1×10^4, and 3.9×10^4 L·mol^-l·cm^-1, respectively, and 0.00069, 0.0012, 0.00078, and 0.0014 μg·cm2, respectively. The detection limits were found to be 0.001, 0.002, 0.003, and 0.01 mg/L, respectively. The detailed study of various interfering ions to make the method more sensitive was carried out and selective and several real samples were analyzed with satisfactory results.     

The development and application of guidance on equipment qualification of analytical instruments

 This paper describes the development of guidance for the equipment qualification (EQ) of analytical instruments. EQ is a formal process that provides documented evidence that an instrument is fit for its intended purpose and kept in a state of maintenance and calibration consistent with its use.     

Sample preparation and current applications of liquid chromatography for the determination of non-structural carbohydrates in plants

This article summarizes the current methods of determination of non-structural carbohydrates (NSCs) in plant samples based on liquid chromatography (LC). NSCs comprise several types of carbohydrates: sugar alcohols (e.g., sorbitol), monosaccharides (e.g., glucose and fructose), disaccharides (e.g., sucrose), oligosaccharides (e.g., raffinose) and polysaccharides [e.g., starch and polyfructans (e.g., inulin)]. NSCs are important in plant metabolism and have to be strictly distinguished from all sorts of structural carbohydrates (e.g., polysaccharide cellulose) that make up the backbone of the plants. Consequently, preservation of structural carbohydrates is a crucial step during sample preparation for NSC determination and is therefore addressed.Sugar alcohols, monosaccharides, disaccharides and those oligosaccharides that are easily soluble in polar solvents can be analyzed directly by high-performance LC. They are also referred to as free carbohydrates (FCs).However, polysaccharides are generally submitted to hydrolyzation into monomers prior to their quantitative analysis. This can be done either chemically, using acids, or enzymatically - both methods are discussed. For identification and quantification of the NSCs after LC separation, the following detectors are used: pulsed amperometry, refractive index, evaporate light scattering and finally, mass spectrometry.