Effect of CO2/CO Addition in Dehydroaromatization of Methane on Zeolite-Supported Mo and Re Catalysts Towards Hydrogen, Benzene and Naphthalene

High activity and high formation selectivity for aromatics in the dehydrocondensation reaction of methane were realized only on selected catalysts. The requisites of a metal and a zeolite support as the selected catalyst were described. However, the catalytic activity steadily declined even on the selected catalysts with time on stream because of coke accumulation. A stable catalytic activity was obtained when CO₂ or CO was added into methane feed due to effective removal of coke from the catalyst surface by CO or CO₂. The route from methane to aromatics and the formation process of active phase of catalyst were discussed.     

Bifunctional catalysis of Mo/HZSM-5 in the dehydroaromatization of methane with CO/CO2 to benzene and naphthalene

The catalytic dehydrocondensation of methane to aromatics such as benzene and naphthalene was studied on the Mo carbide catalysts supported on micro- and mesoporous materials such as HZSM-5 (0.6 nm) and FSM-16 (2.7 nm). The Mo catalysts supported on H-ZSM-5 having appropriate micropores (0.6 nm size) and Si/Al ratios (20-70) exhibit higher yields (90-150 nmol/g-cat/s) and selectivities (higher than 74% on the carbon basis) in methane conversion to aromatic products such as benzene and naphthalene at 973 K and 1 atm, although they are drastically deactivated because of substantial coke formation. It was demonstrated that the CO/CO₂ addition to methane effectively improves the catalyst performance by keeping a higher methane conversion and selectivities of benzene formation in the prolonged time-on-stream. The oxygen derived from CO and CO₂ dissociation suppresses polycondensation of aromatic products and coke formation in the course of methane conversion. XAFS and TG/DTA/mass-spectrometric studies reveal that the zeolite-supported Mo oxide is endothermally converted under the action of methane around 955 K to nanosized particles of molybdenum carbide (Mo₂C) (Mo-C, coordination number = 1,R- 2.09 å; Mo-Mo, coordination number = 2.3–3.5;R = 2.98 å). The SEM pictures showed that the nanostructured Mo carbide particles are highly dispersed on and inside the HZSM-5 crystals. On the other hand, it was demonstrated by IR measurements of pyridine adsorption that the Mo/HZSM-5 catalysts having the optimum SiO₂/Al₂O₃ ratios around 40 show the maximum Brönsted acidity among the catalysts with the SiO₂/Al₂O₃ ratios of 20–1900. There is a close correlation between the activity of benzene formation in the methane aromatization and the Brönsted acidity of HZSM-5 due to the bifunctional catalysis.     

Production of Hydrogen from Methane by a CO2 Emission-Suppressed Process: Methane Decomposition and Gasification of Carbon Nanofibers

Catalytic methane decomposition into hydrogen and carbon nanofibers and the oxidations of carbon nanofibers with CO₂, H₂O and O₂ were overviewed. Supported Ni catalysts (Ni/SiO₂, Ni/TiO₂ and Ni/carbon nanofiber) were effective for the methane decomposition. The activity and life of the supported Ni catalysts for methane decomposition strongly depended on the particle size of Ni metal on the catalysts. The modification of the catalysts with Pd enhanced the catalytic activity and life for methane decomposition. In particular, the supported Ni catalysts modified with Pd showed high turnover number of hydrogen formation at temperatures higher than 973 K with a high one-pass methane conversion (>70%). However, sooner or later, every catalyst completely lost their catalytic activities due to the carbon layer formation on active metal surfaces. In order to utilize a large quantity of the carbon nanofibers formed during methane decomposition as a chemical feedstock or a powdered fuel for heat generation, they were oxidized with CO₂, H₂O and O₂ into CO, synthesis gas and CO₂, respectively. In every case, the conversion of carbon was greater than 95%. These oxidations of carbon nanofibers recovered or enhanced the initial activities of the supported Ni catalysts for methane decomposition.     

The influence of La2O3 and TiO2 on NiO/MgO/α-Al2O3

Summary The effect of La₂O₃ and TiO₂ on product selectivity, methane conversion and coke formation over NiO/MgO/ α -Al₂O₃ catalyst were studied in a simultaneous steam and CO₂ reforming of methane to syngas. La₂O₃ and TiO₂ were added to the catalyst via incipient wetness impregnation and bulk precipitation techniques and catalyst activity was tested in a fixed bed quartz reactor. Results reveal that although the addition of these oxides has no effect on the product selectivity and methane conversion, but can reduce coke formation on the surface of the catalysts as it can enhance the mobility of lattice oxygen anions. The results further show that the catalysts prepared by bulk precipitation technique decrease the coke formation more effectively.     

碱金属和碱土金属促进的Ni/SiO2催化剂上甲烷的二氧化碳重整制合成气

Ni/SiO2 catalysts promoted by alkali metals K and Cs or alkaline earth metals Mg, Ca, Sr and Ba were prepared, characterized by H2-TPR and XRD, and used for the production of synthesis gas via methane reforming with CO2. Though K and Cs promoted Ni catalysts could eliminate coke deposition, the reforming activity of these promoted catalysts was decreased heavily. Mg and Ca promoted Ni/SiO2 catalysts exhibited excellent coke resistance ability with minor loss of the reforming activity of Ni/SiO2. Ba showed poor coke resistance ability and small amount of Sr increased the formation of coke. The possible mechanism of these promoters was discussed.     

Regulation of Coordination Number over Single Co Sites: Triggering the Efficient Electroreduction of CO2

The design of active, selective, and stable CO₂ reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were prepared and their CO₂ electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two‐coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm^?2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h^?1, surpassing most reported metal‐based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO₂ to the CO₂^.? intermediate and hence enhances CO₂ electroreduction activity.     

On the hydrogenation of CO and CO2 over copper/zirconia and palladium/zirconia catalysts

Summary Zirconia-supported hydrogenation catalysts were obtained by activation of the amorphous precursors Cu₇₀Zr₃₀ and Pd₂₅Zr₇₅ under CO₂ hydrogenation conditions. Catalysts of comparable compositions prepared by co-precipitation and wet impregnation of zirconia with copper- and palladium salts, respectively, served as reference materials. The catalyst surfaces under reaction conditions were investigated by diffuse reflectance FTIR spectroscopy. Carbonates, formate, formaldehyde, methylate and methanol were identified as the pivotal surface species. The appearance and surface concentrations of these species were correlated with the presence of CO₂ and CO as reactant gases, and with the formation of either methane or methanol as reaction products. Two major pathways have been identified from the experimental results. i) The reaction of CO₂/H₂-mixtures on Cu/zirconia and Pd/zirconia primarily yields surface formate, which is hydrogenated to methane without further observable intermediates. ii) The catalytic reaction between CO and hydrogen yields -bonded formaldehyde, which is subsequently reduced to methylate and methanol. Interestingly, there is no observable correlation between absorbed formaldehyde or methylate on the one hand, and gas phase methane on the other hand. The reactants, CO₂ and CO, can be interconverted catalytically by the water gas shift reaction. The influence of the metals on this system of coupled reactions gives rise to different product selectivities in CO₂ hydrogenation reactions. On zirconia-supported palladium catalysts, surface formate is efficiently reduced to methane, which consequently appears to be the principal CO₂ hydrogenation product. In contrast, there is a favorable reaction pathway on copper in which CO is reduced to methanol without C-O bond cleavage; surface formate does not participate significantly in this reaction. In CO₂ hydrogenations on copper/zirconia, methanol can be obtained as the main product, from a sequence of the reverse water gas shift reaction followed by CO reduction.     

Carbon deposition in methane reforming with carbon dioxide

Coke formation in the dry reforming of methane was studied using a thermobalance (TG) and with a catalytic microreactor in the temperature range 800–950 K. Silica-supported and lanthana-supported nickel catalysts were examined. The effects of process variables such as temperature and gas composition (He dilution, CH₄/CO₂ ratio) on the coke formation rate were determined. The reactivity of H₂ on several kinds of carbon was also investigated. The morphology of the coke was studied by scanning electron microscopy (SEM). The induction times for coke formation were significantly affected by temperature and by the CO content in the feed gas. The results of catalytic tests were consistent with the TG measurements. The behaviour of SiO₂ and La₂O₃ supported Ni catalysts agree with a mechanism in which the lanthana support plays an important role in the carbon deposition.     

等离子体处理制备对甲烷重整Ni基催化剂抗积炭性能的改进

对于甲烷重整反应,Ni基催化剂具有与贵金属催化剂相当的活性,但其易于积炭失活.本文总结了辉光放电等离子体处理制备CO2甲烷重整Ni催化剂以提高催化剂抗积炭性能的研究进展.比较表明,辉光放电等离子体处理制备的Ni催化剂,Ni颗粒较小,分散性更好,密集平面增加,且Ni活性组分与载体相互作用加强.这些变化导致Ni催化剂抗积炭性能改善.     

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

In this paper, the Ce_XZr_1-XO₂-supported PdO catalysts were prepared and the effect of Ce/Zr ratio on catalytic activity for CO and methane oxidation was studied, both activity and the reduction behavior of catalyst depend on the Ce/Zr ratio. The reduction behavior of those catalysts was characterized by means of TPR.     

Comparative study on stability and coke deposition over supported Rh and FePO4 catalysts for oxy-bromination of methane

Rhodium- and iron phosphate-based catalysts are by far the most promising catalysts for oxy-bromination of methane (OBM) reaction. However, most literature reported either Rh- or FePO₄-based catalysts, and the results were rarely studied in a uniform environmental condition. In this report, comparative study was conducted on silica- and silicon carbide-supported rhodium and iron phosphate catalysts with the main focuses on stability performance and coke deposition. The catalytic results demonstrated that the stability of both Rh- and FePO₄-based catalysts was greatly influenced by the supports used, and silicon carbide-supported catalysts showed much better anti-coking ability as compared with silica-supported ones. Temperature-programmed oxidation over the used catalysts further indicated that the coke formation mechanisms were completely different between silica-supported rhodium and iron phosphate catalysts. While cokes might be caused by condensation of CH₂Br₂ over supported iron phosphate, methane decomposition might be the reason for coke formation over silica-supported rhodium catalyst. These findings might pave the way for designing highly efficient and stable catalysts of the OBM reaction.     

Morphology effect of ZnO support on the performance of Cu toward methanol production from CO2 hydrogenation

Recently, the chemical conversion of the greenhouse gas CO₂ into value-added methanol has been of great interest. To address this issue, ZnO nanorods were synthesized by a facile microwave assisted technique and selected as support in Cu/ZnO catalyst. Herein, structure-activity relationship of the as-prepared catalysts in CO₂ hydrogenation to methanol were elucidated in detail using different characterization technique including N₂ physisorption, XRD, TPR, TEM, XPS and insitu DRIFTS (CO chemisorption) etc. Interestingly, rodlike ZnO hosted the highly dispersed Cu species, stronger Cu-support interaction at the interface in comparison with another reference CuZn-C sample, which was supported on commercial ZnO. In particular, EPR and XPS analysis evidenced the direct electron transfer from ZnO support to Cu species in CuZn-R, thereby facilitating the formation of O vacancies. These positive factors could provide the extremely active sites for CO₂ hydrogenation and be correlated to the better catalytic activity. Indeed, the calculated TOF_methanol for CuZn-R was approximately ten times larger than that of CuZn-C sample. The results implied that the morphology structure of ZnO support, which could induce various crystal planes and amounts of defects and/or imperfections, possessed a critical role on the catalytic performance. This finding might shed light on the design of efficient catalysts for catalytic conversion of the undesirable CO₂.     

Synthesis of Highly-Dispersed Ni/Mesoporous Silica via an Ammonia Evaporation Method for Dry Reforming of Methane: Effect of the Ni Loadings

Mesoporous silica was used in conjunction with the ammonia evaporation method to prepare highly dispersed Ni catalysts for the dry reforming of methane (DRM). The effect of Ni dispersion on the catalytic performance was investigated by applying different Ni loadings. The pore structure, morphology, Ni dispersion, catalytic activity for DRM as well as the coke resistance were investigated. During the reaction at a relatively low temperature of 600 °C, all the three catalysts exhibited high stability in CH₄ and CO₂ conversion and excellent coke resistance, in comparison to Ni/SiO₂ catalyst prepared by the incipient wetness method. Among them, 10% Ni–SiO₂ exhibited the best catalytic performance with the maximum steady conversions of 62% and 69% for CH₄ and CO₂ at 600 °C, which was beneficial from its optimal Ni content and the presence of highly-dispersed metal nanoparticles confined in the mesopores.

     

Effect of methane co-feeding on the selectivity of ethylene produced from oxidative dehydrogenation of ethane with CO2 over a Ni-La/SiO2 catalyst

A Ni-La/SiO₂ catalyst was prepared through the incipient wetness impregnation method and tested in the oxidative dehydrogenation of ethane (ODHE) with CO₂. The fresh and used catalysts were characterized by XRD and SEM techniques. The Ni-La/SiO₂ catalyst exhibited catalytic activity for the oxidative dehydrogenation of ethane, but with low ethylene selectivity in the absence of methane. The selectivity to ethylene increased with increasing molar ratio of methane in the feed. The carbon deposited on the catalyst surface in the sole ODHE with CO₂ was mainly inert carbon, while much more filamentous carbon was formed in the presence of methane. The filamentous carbon was easy to be removed by CO₂, which might play a role in improving the conversion of ethane to ethylene. The introduction of methane might affect the equilibrium of the CO₂ reforming of ethane and the ODHE with CO₂. As a consequence, the synthesis gas produced from CO₂ reforming of methane partly inhibited the reaction of ethane and promoted the ODHE with CO₂, thus increasing the selectivity of ethylene.     

Correlating Oxidation State and Surface Ligand Motifs with the Selectivity of CO2 Photoreduction to C2 Products

The design for non-Cu-based catalysts with the function of producing C₂₊ products requires systematic knowledge of the intrinsic connection between the surface state as well as the catalytic activity and selectivity. In this work, photochemical in situ spectral surface characterization techniques combined with the first principle calculations (DFT) were applied to investigate the relationships between the composition of surface states, coordinated motifs, and catalytic selectivity of a titanium oxynitride catalyst. When the catalyst mediates CO₂ photoreduction, C₂ product selectivity is positively correlated with the surface Ti²⁺/Ti³⁺ ratio and the surface oxidation state is regulated and controlled by coordinated motifs of N−Ti-O/V[O], which can reduce the potential dimerization energy barriers of *CO−CO* and promote spontaneous formation of the subsequent *CO−CH₂* intermediate. This phenomenon provides a new perspective for the design of heterogeneous catalysts for photoreduction of CO₂ into useful products.     

Selective CO methanation over amorphous Ni-Ru-B/ZrO2 catalyst for hydrogen-rich gas purification

Amorphous Ni-Ru-B/ZrO₂ catalysts were prepared by chemical reduction method. The effects of Ni-Ru-B loading and Ru/Ni mole ratio on the catalytic performance for selective CO methanation from reformed fuel were studied, and the catalysts were characterized by BET, ICP, XRD and TPD. The results showed that Ru strongly affected the catalytic activity and selectivity by increasing the thermal stability of amorphous structure, promoting the dispersion of the catalyst particle, and intensifying the CO adsorption. For the catalysts with Ru/Ni mole ratio under 0.15, the CO methanation conversion and selectivity increased significantly with the increasing Ru/Ni mole ratio. Among all the catalysts investigated, the 30 wt% Ni-Ru-B loading amorphous Ni₆₁Ru₉B₃₀/ZrO₂ catalyst with 0.15 Ru/Ni mole ratio presented the best catalytic performance, over which higher than 99.9% of CO conversion was obtained in the temperature range of 230°C～250°C, and the CO₂ conversion was kept under the level of 0.9%.     

Effects of CO2 content on the activity and stability of nickel catalyst supported on mesoporous nanocrystalline zirconia

The effects of carbon dioxide content on the catalytic performance and coke formation of nickel catalyst supported on mesoporous nanocrystalline zirconia with high surface area and pure tetragonal crystalline phase were investigated in methane reforming with carbon dioxide. The samples were characterized by XRD, BET, TPR, TPO, TPH, TEM, and SEM techniques. The catalyst prepared showed high surface area and a mesoporous structure with a narrow pore size distribution. The obtained results revealed that the increase in CO2 content increased the methane conversion and stability of the catalyst and significantly reduced the coke deposition. The TPH analysis showed that several species of carbon with different reactivities toward hydrogenation were deposited on the spent catalysts employed under different CO2 contents.     

Reforming of CH4 with CO2 over Rh/H-Beta:Effect of Rhodium Dispersion on the Catalytic Activity and Coke Resistance

The effect of Rh dispersion on reforming of CH₄ with CO₂ over H‐Beta supported Rh catalysts has been investigated. The CH₄ and CO₂ conversion over the catalysts increase with increasing Rh loading from 0.5 wt% to 4.0 wt% in the reaction temperature range of 823–1123 K. The high TOF of CH₄ over 0.5 wt% and 1.0 wt% Rh/H‐beta may be attributed to high dispersion of rhodium species. The catalysts before and after the reaction were characterized by XRD, TEM, and TG‐DTA and the results indicate the catalysts with Rh loading of 0.5 wt% and 1.0 wt% exhibiting high resistance to coke. Under controllable conditions, we confirm that the coke is originated from methane dissociation and can be substantially oxidized by active oxygen species dissociated from the adsorbed carbon dioxide on the catalyst with high dispersion of Rh species.     

Oxidative dehydrogenation of ethylbenzene to styrene with CO2 over Al-MCM-41-supported vanadia catalysts

Catalytic performance of Al-MCM-41-supported vanadia catalysts (V/Al-MCM-41) with different V loading was investigated for oxidative dehydrogenation of ethylbenzene to styrene (ST) with CO₂ (CO₂-ODEB). For comparison, pure silica MCM-41 was also used as support for vanadia catalyst. The catalysts were characterized by N₂ adsorption, X-ray diffraction (XRD) pyridine-Fourier-transform infrared spectroscopy, H₂-temperature-programmed reduction, thermogravimetric analysis (TGA), UV-Raman, and diffuse reflectance (DR) UV–vis spectroscopy. The results indicate that the catalytic behavior and the nature of V species depend strongly on the V loading and the support properties. Compared with the MCM-41-supported catalyst, the Al-MCM-41-supported vanadia catalyst exhibits much higher catalytic activity and stability along with a high ST selectivity (>98%). The superior catalytic performance of the present V/Al-MCM-41 catalyst can be attributed to the Al-MCM-41 support being more favorable for the high dispersion of V species and the stabilization of active V⁵⁺ species. Together with the characterization results of XRD, TGA, and DR UV–Vis spectroscopy, the deep reduction of V⁵⁺ into V³⁺ during CO₂-ODEB is the main reason for the deactivation of the supported vanadia catalyst, while the coke deposition has a less important impact on the catalyst stability.     

Mo基分子筛催化剂及甲烷无氧芳构化

本文综述了甲烷无氧芳构化反应及Mo基分子筛催化剂的研究进展。在众多的催化剂中以Mo基分子筛催化性能最佳。概括了催化剂中关于MoO_<em>x前躯体结构和其在分子筛中落位,Mo₂C物种和诱导期等;讨论了反应中涉及的中间产物、双功能机理以及催化剂失活等问题;归纳了催化剂制备过程中制备方法、焙烧温度与时间、Mo载量和分子筛硅铝比以及催化剂预处理对反应活性的影响;综述了提高催化剂催化性能和反应性能的各种方法,并对其分析,同时介绍了两种催化剂再生方法。最后,依据本实验室研究进展,对甲烷芳构化从工艺角度进行一些可行性讨论,并提出相关问题和展望。