Synthesis, coupling, and condensation reactions of 1,2-diborylated benzenes: an experimental and quantum-chemical study

1,2-Bis(pinacolboryl)benzene (1,2-C(6) H(4) (Bpin)(2) , 2) was synthesized in preparatively useful yields from 1,2-C(6) H(4) Br(2) , iPrO?Bpin, and Mg turnings in the presence of 1,2-C(2) H(4) Br(2) as an entrainer. Compound 2 is a versatile starting material for the synthesis of (un)symmetrically substituted benzenes (i.e., 1,2-C(6) H(4) (Ar(1) )(Ar(2) )) through sequential Suzuki-Miyaura coupling reactions. Alternatively, it can be transformed into bis-borate Li(2) [1,2-C(6) H(4) (BH(3) )(2) ] (3) through reduction with Li[AlH(4) ]. In the crystal lattice, the diethyl ether solvate 3?OEt(2) establishes a columnar structure that is reinforced by an intricate network of B?(μ-H)?Li interactions. Hydride-abstraction from compound 3 with Me(3) SiCl leads to the transient ditopic borane 1,2-C(6) H(4) (BH(2) )(2) , which can either be used in situ for subsequent hydroboration reactions or trapped as its stable NMe(2) Et diadduct (6). In SMe(2) solution, the putative diadduct 1,2-C(6) H(4) (BH(2) ?SMe(2) )(2) is not long-term stable but rather undergoes a condensation reaction to give 9,10-dihydro-9,10-diboraanthracene, HB(μ-C(6) H(4) )(2) BH, and BH(3) . 9,10-Dihydro-9,10-diboraanthracene was isolated from the reaction mixture as its SMe(2) monoadduct (7), which dimerizes in the solid state through two B?H?B bridges ((7)(2) , elucidated by X-ray crystallography). In contrast, hydride-abstraction from compound 3 in THF or CH(2) Cl(2) provides the unique exo-adduct H(2) B(μ-H)(2) B(μ-C(6) H(4) )(2) B(μ-H)(2) BH(2) (8, elucidated by X-ray crystallography). Quantum-chemical calculations on various conceivable isomers of [1,2-C(6) H(4) (BH(2) )(2) ](2) revealed that compound 8 was the most stable of these species. Moreover, the calculations confirmed the experimental findings that the NMe(2) Et diadduct of 1,2-C(6) H(4) (BH(2) )(2) is significantly more stable than the corresponding SMe(2) complex and that the latter complex is not able to compete successfully with borane-dimerization and -condensation. The reaction cascade in SMe(2) , which proceeds from 1,2-C(6) H(4) (BH(2) )(2) to the observed adducts of HB(μ-C(6) H(4) )(2) BH, has been elucidated in detail and the important role of B?C?B-bridged intermediates has been firmly established.     

SynthesisofFullereneC＿（60）DerivativesbyOne－potProcedure

ＳｙｎｔｈｅｓｉｓｏｆＦｕｌｌｅｒｅｎｅＣ＿６０ＤｅｒｉｖａｔｉｖｅｓｂｙＯｎｅ－ｐｏｔＰｒｏｃｅｄｕｒｅＤＯＮＧＧｕｏ－ｘｉａｏ,ＬＩＪｉ－ｓｈｅｎｇ＊,ＪＩＧａｉ－ｊｉａｏ（ＩｎｓｔｉｔｕｔｅｏｆＣｈｅｍｉｓｔｒｙ,ＡｃａｄｅｍｉａＳｉｎｉｃａ,...     

Oxidative addition of <Emphasis Type="Italic">N</Emphasis>-aminophthalimide to styryl-1,2,4-oxadiazoles

The oxidation of N-aminophthalimide with lead tetraacetate in the presence of 5-[(E)-2-arylethenyl]-3-(4-methylphenyl)-1,2,4-oxadiazoles and 5-(4-methylphenyl)-3-[E)-2-phenyl-ethenyl]-1,2,4-oxadiazole led to the formation of the corresponding (3-aryl-1-phthalimidoaziridin-2-yl)-(4-methylphenyl)-1,2,4-oxadiazoles. In the reaction with 3,5-distyryl-1,2,4-oxadiazole a mixture was obtained of two regioisomeric monoadducts and a diadduct in the ratio 80 : 15: 5; at the use of 3 equiv of the aziridinating reagents only diadduct was isolated as a mixture of two diastereoisomers in the ∼3 : 2 ratio that were separated by recrystallization.     

C60O2可能异构体的结构,电子光谱和NMR谱的理论研究

用ＩＮＤＯ系列方法研究Ｃ６０Ｏ２可能异构体的结构，两个氧原子分别加在两个六元环相邻边或五六元环相邻边形成环氧结构，为Ｃｓ对称性，得６种可能构型，计算表明，两个氧原子加在同个六元环的六六元环相邻边所形成环氧结构Ｃｓ构型最稳定，环氧处Ｃ－Ｃ键不断开，与实验结果一致，其电子光谱计算结果亦与实验值相吻合，这种Ｃｓ构环氧结构所在六元环上的另一个Ｃ－Ｃ键有大的键序，为高活性位置，因此Ｃ６０Ｏ２可能有较好的化学     

Quantum chemical study of atomic structure evolution of Cox/C60 (x<or=2.8) composites

The main features of the local atomic structure of novel Cox/C60 (x相似文献   

61-甲基-61-[12-(N,N-四氯邻苯二甲酰基)脱氢枞胺]-1,2-亚甲基富勒烯[60]的合成

以脱氢枞胺为原料,经氨基酰化、12位乙酰化、与对甲苯磺酰肼形成对甲苯磺酰腙衍生物,再通过卡宾中间体与C60进行[2+1]环加成反应合成了C60-脱氢枞胺衍生物。目标化合物经IR,UV-Vis,1H NMR,13C NMR,MALDI-TOF MS表征,所得化合物为[6,6]闭环结构C60加成产物。     

Theoretical Study of the C_(60)O_3 Isomers

WiththepreparationandisolationofC,,O.'moreandmoreattentionwaspaidtotheirstructuresandpropertiest').WooddetectedC,,O.firstwhentheypreparedC,,byvaporizinggraphite").Fromthenon,thelaboratoriesallovertheworldhavepreparedC6,O.byvariousmethodssuchasPhotoxidationt2-4),Electrochemicaloxi-dation[si,Ozonizationt7.83andChemicaladditiont6'12-14iandsoon.Accordingtothefollow-uptheoreticalstudiesforC,,O.,itisindicatedthattherearetwoisomersofC,,O:eithertheoxygenatomislocatedoverthe6/6bondtogeneratethe6/…     

Structure and properties of ionic fullerene complex Co(+)(dppe)2·(C60˙-)·(C6H4Cl2)2: distortion of the ordered fullerene cage of C60˙- radical anions

New ionic complex {Co(+)(dppe)(2)}·(C(60)˙(-))·(C(6)H(4)Cl(2))(2) (1) was obtained by the reduction of a Co(dppe)Br(2) and C(60) mixture by TDAE in o-dichlorobenzene followed by precipitation of crystals by hexane. Optical and EPR spectra of 1 indicated the formation of C(60)˙(-) radical anions and diamagnetic Co(+)(dppe)(2) cations. The structure of 1 solved at 100(2) K involves chains of C(60)˙(-) arranged along the lattice a-axis with a center-to-center distance of 10.271 ?. The chains are separated by bulky Co(+)(dppe)(2) cations and solvent molecules. All components of 1 are well ordered allowing the distortion of the C(60)˙(-) radical anion to be analyzed. An elongation of the C(60)˙(-) sphere by 0.0254(2) was found. It is essentially smaller than those in the salts (Cp*(2)Ni(+))·(C(60)˙(-))·CS(2) and (PPN(+))(2)·(C(60)(2-)) with greater distortion of the fullerene cage. The calculation of the electronic structure of fullerene by the extended Hückel method showed slight splitting of the C(60) LUMO, due to the distortion, by three levels. Two levels are located 180 and 710 cm(-1) higher than the ground level. The averaged 6-6 and 5-6 bonds in C(60)˙(-) with lengths of 1.397(2) and 1.449(2) ? are close to those determined for the C(60)(2-) dianions in (PPN(+))(2)·(C(60)(2-)), but are slightly longer and shorter, respectively, than the length of these bonds in neutral C(60).     

Bromination-mediated regioselective preparation of cyclopentadienyl-type [60]fullerene derivatives with alkoxy, peroxy, and bromo or hydro addends

Bromine reacts with the 1,2-bisadduct C(60)(OOtBu)(2) efficiently to form the cyclopentadienyl-type compound 4 (C(60)(OOtBu)(2)Br(4)). In the presence of AgClO(4), the four bromine atoms can be replaced regioselectively by methoxyl groups in a stepwise fashion to form C(60)(OOtBu)(2)Br(4-x)(OMe)(x). A second alcohol may be introduced by treating partially methoxylated compound 6 (C(60)(OOtBu)(2)Br(2)(OMe)(2)) with ROH/AgClO(4). Other related reactions have been investigated to explore the reactivity patterns. The structure of compound 6 was confirmed by single crystal X-ray analysis.     

Neutral and ionic complexes of C60 with metal dibenzyldithiocarbamates. Reversible dimerization of C60*- in ionic multicomponent complex [Cr(I)(C6H6)2*+].(C60*-).0.5[Pd(dbdtc)2

New molecular complexes of C60 with metal(II) dibenzyldithiocarbamates, M(dbdtc)2.C60.0.5(C6H5Cl), where M=Cu(II), Ni(II), Pd(II), and Pt(II) and an ionic multicomponent complex [Cr(I)(C6H6)2*+].(C60*-).0.5[Pd(dbdtc)2] (Cr(C6H6)2: bis(benzene)chromium) were obtained. According to IR, UV-visible-NIR, and EPR spectra, involve neutral components, whereas 5 comprises neutral Pd(dbdtc)2 and C60*- and Cr(I)(C6H6)2*+ radical ions. The crystal structure of at 90 K reveals strongly puckered fullerene layers alternating with those composed of Pd(dbdtc)2. The Cr(I)(C6H6)2*+ radical cations are arranged between the layers. Fullerene radical anions form pairs within the layer with an interfullerene C...C contact of 3.092(2) A, indicating their monomeric state at 90 K. This contact is essentially shorter than the sum of van der Waals radii of two carbon atoms, and consequently, C60*- can dimerize. According to SQUID and EPR, single-bonded diamagnetic (C60-)2 dimers form in below 150-130 K on slow cooling and dissociate above 150-170 K on heating. The hysteresis was estimated to be 20 K. For the (C60-)2 dimers in, the dissociation temperature is the lowest among those for ionic complexes of C60 (160-250 K). Fast cooling of the crystals within 10 min from room temperature down to 100 K shifts dimerization temperatures to lower than 60 K. This shift is responsible for the retention of a monomeric phase of at 90 K in the X-ray diffraction experiment.     

Self-assembled photoresponsive amphiphilic diphenylaminofluorene-C60 conjugate vesicles in aqueous solution

Water-soluble oligo(ethylene glycolated) derivatives of two-photon absorptive diphenylaminofluorenocarbonyl-methano[60]fullerene, denoted as C60(>DPAF-EG6), were synthesized with their molecular self-assembly characteristics in H2O studied. The formation of nano- to submicron-sized spherical hollow vesicles with a shell width of 15-20 nm was observed by transmission electron microscopy (TEM) micrographs. This shell width fits approximately with the length of a disordered bilayer-like molecular packing of C60(>DPAF-EG6), arising from strong intermolecular hydrophobic interactions of fullerene cages. Photoinduced intramolecular charge separation followed by charge recombination on the nanosecond time scale, from the DPAF moiety to the C60 cage in the vesicle structure, was detected via transient spectroscopic measurements.     

Polyfuryl(aryl)alkanes and their derivatives 9. Polyfuryl(aryl)methanes in the diels-alder reaction

The reaction of polyfuryl(aryl)methanes with N-(3,5-dichlorophenyl)maleimide has been studied. It was found that tetrasubstituted methanes do not react. Difurylmethane, gem-difurylethane, gem-difurylethane, and trifurylmethane form mono- and diadducts, and difurylarylmethanes form only monoadducts. The molecular and crystal structure of the diadduct of gem-difurylethane- gem-bis {4-aza-7-methyl-10-oxa-4-(3,5-dichlorophenyl)tricyclo-[5,2,1,0 _2,6]deca-8-en-3,5-dion-1-yl}ethane has been studied.For Communication 8, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 751–758, June, 1993.     

Synthesis and characterization of difluoromethylene-homo[60]fullerene, C60(CF2)

Refluxing of the o-DCB solution of C60 with CF2ClCOONa and 18-crown-6 leads to formation of C60(CF2)n (n = 1-3); the monoadduct C60(CF2) has been found to consist of the main [6,6]- and minor [5,6]-isomers, both having an open structure.     

Fused five-membered rings determine the stability of C60F60

The structure and stability of a set of (CF)60 isomers have been computed at the B3LYP/6-31G(d) density functional theory level. The most stable isomer (6, F4@C60F56) has tube-like structure with four endo C-F bonds and fused five-membered rings at the end of the tube, while the reported most stable cage structure (2, F8@C60F52) with eight endo C-F bonds is higher in energy by 22.6 kcal/mol. This is in contrast to the isolated pentagon rule for the stability of fullerenes. The mean bond dissociation energy of 6 is larger than those of the experimental known C60F36, C60F48, and graphite fluoride. The relative energy per CF unit of 6 to graphite fluoride (CF)n is 3.7 kcal/mol, which is smaller than that of C60 fullerene per carbon to graphite (about 9-10 kcal/mol).     

Highly ordered C60 monolayer self-assembled by using an iodine template on an Au(111) surface in solution

An iodine-modified Au(111) surface, (I/Au(111)), was used as a substrate to prepare a C 60 adlayer by self-organization in a benzene solution. A highly ordered C 60 adlayer was successfully prepared due to the moderate C 60-I/Au(111) interaction. Two lattice structures, (2 square root 3 x 2 square root 3) R30 degrees and p(2 x 2), were imaged for this C 60 adlayer. For the first structure, a featureless ball-like molecular shape was imaged, ascribed to the molecular rotation resulting from a symmetrical location between C 60 and iodine atoms. For the p(2 x 2) structure, the asymmetrical location of C 60 with respect to the iodine atoms freezes the C 60 molecules on the substrate, leading to a clear image of intramolecular structure. The intermediate iodine atoms in the C 60/I/Au(111) adlayer can be desorbed by electrochemically reduction without significantly affecting the ordering of the C 60 adlayer. However, the internal pattern of C 60 disappears in the absence of iodine.     

Photoreactivity of furocoumarins and DNA in PUVA therapy: formation of psoralen-thymine adducts

The mechanism of the [2+2] cycloaddition photoreaction of psoralen and a DNA nucleobase, thymine, cornerstone of the furocoumarin-based PUVA (psoralen+UVA radiation) phototherapy, has been studied by the quantum-chemical multiconfigurational CASPT2 method. Triplet- and singlet-mediated mono- and diadduct formations have been determined to take place via singlet-triplet crossings and conical intersections, correlated with the initially promoted triplet or singlet states in different possible reactive orientations. Pyrone-side monoadducts are suggested to be formed in the triplet manifold of the system, and to be less prone to yield diadducts because of the properties of the monoadduct lowest triplet state and the minor accessibility of its excited singlet states. Furan-side monoadducts are better produced in the singlet manifold after reaching a conical intersection with the ground state of the system. From there, the absorption of a second photon would in this case trigger the formation of the diadduct. The proposed mechanisms enable rationalizing the phototherapeutic behavior of several furocoumarins.     

基于磷光材料的低给体比例有机太阳能电池

本文以低比例的磷光材料作为给体,制备了基于MoOx/C60:x%Ir(ppy)3的有机太阳能电池(OPV)器件.其中,C60为高比例的受体材料,金属配合物Ir(ppy)3为低比例的给体材料,MoOx为阳极缓冲层.通过一系列不同Ir(ppy)3比例的OPV器件对比研究,得出了最优器件结构.研究发现,当Ir(ppy)3比例足够小时,器件表现为肖特基势垒,开路电压(VOC)较大,短路电流(JSC)较小;随着Ir(ppy)3比例的增加,VOC逐渐减少,而JSC逐渐增大;当进一步增加Ir(ppy)3比例时,VOC趋于稳定,JSC开始减小.结果显示,5%Ir(ppy)3比例的器件性能最佳,效率达1.7%.为了使器件效率得到进一步提升,本研究组采用吸收光谱范围比C60更宽的C70作为受体材料,使光电转换效率进一步提升至3.0%.     

Crystallographic characterization of Kr@C60 in (0.09Kr@C60/0.91C60). (NiII(OEP)).2C6H6

A sample of C60 containing ca. 9% Kr@C60 has been used to form crystalline (0.09Kr@C60/0.91C60).(NiII(OEP)).2C6H6 whose X-ray crystal structure reveals that the Kr atom is centered within the carbon cage and does not produce a detectable change in the size of the fullerene.     

Selective extraction of higher fullerenes using cyclic dimers of zinc porphyrins

Higher fullerenes (>/=C76) were selectively extracted from a fullerene mixture obtained from a combustion-based industrial production source by cyclic dimers of beta-unsubstituted porphyrin zinc complexes 2C5-2C7 with C5-C7 alkylene spacers as host molecules. Results of single extraction of the fullerene mixture with 2C5-2C7 together with a beta-substituted analogue of 2C6 (1C6) and spectroscopic titration of 2C6 and 1C6 with C60, C70, and C96 indicated that the host selectivity toward higher fullerenes is much dependent on the structure of the porphyrin units and the size of the host cavity. Sequential three-stage extraction of the fullerene mixture with the best-behaved 2C6 resulted in considerable enrichment in very rare fullerenes C102-C110 (<0.1 abs %) up to 82 abs % (C76-C114, 99 abs %) (356 nm) of total fullerenes.     

Structural aspects of two-stage dimerization in an ionic C60 complex with bis(benzene)chromium: Cr(C6H6)2.C60.C6H4Cl2

Single crystals of the ionic C60 complex with bis(benzene)chromium: {Cr(I)(C6H6)2(.+)}.(C60.-)).C6H4Cl2 (1) were obtained. The crystal structure of 1 shows the presence of monomeric C60.- radical anions at 250 K and the formation of single-bonded (C60-)2 dimers at 90 K. The dimerization is realized in two types of the C60.-) pairs with different interfullerene center-to-center distances of 10.052 and 10.279 A arranged in zigzag chains along the a-direction. As a result, two symmetrically independent (C60-)2 dimers found in 1 at 90 K have different environments, intercage C-C bond lengths and C60- center-to-center distances. Such differences should provide different thermal stability of these dimers and result in the appearance of two stages at the dimerization. Indeed, according to SQUID measurements, the magnetic moment of 1 decreases stepwise at the dimerization in two temperature ranges at 240-200 and 200-160 K.